☆ 4.7 Article

Effect of annealing treatment on mechanical properties of 3D-Printed composites

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

Pei Wang et al.

Summary: As a rapidly developing additive manufacturing technology, fused deposition modeling (FDM) has become widespread in many industry fields. The mechanical properties of printed parts are largely influenced by various process parameters, and the use of poly-ether-ether-ketone (PEEK) and carbon fibers (CFs) can enhance the performance of the materials.

HIGH PERFORMANCE POLYMERS (2022)

Add to Collection

Article Chemistry, Physical

Hybridization Effects on Bending and Interlaminar Shear Strength of Composite Laminates

Alice Monjon et al.

Summary: Fiber-reinforced composites are gradually replacing traditional materials in engineering applications, but their lack of toughness makes them unsuitable for some applications. Hybridization, combining different types of fibers, can improve the mechanical properties. The study found an ideal fiber content that maximizes both properties and recommends specific placement of fibers based on their type.

MATERIALS (2022)

Add to Collection

Article Polymer Science

Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts

Sara Valvez et al.

Summary: The study aims to optimize the printing parameters to maximize the mechanical properties of PETG and its composites (CF and KF). The experimental results show that the best bending properties can be achieved within a certain range of parameters.

POLYMERS (2022)

Add to Collection

Article Engineering, Manufacturing

Characterization of the effect of in-process annealing using a novel print head assembly on the ultimate tensile strength & toughness of Fused Filament Fabrication (FFF) parts

Parimal Patel et al.

Summary: This paper presents a modified heater block assembly to apply in-process thermal load during upright printing. The design addresses the issue of filament adhesion between layers in thin, tall structures. Experimental research provides a better understanding of improved mechanical strength of printed parts.

VIRTUAL AND PHYSICAL PROTOTYPING (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Effects of process parameters and annealing on the tensile strength of 3D printed carbon fiber reinforced polylactic acid

P. Arjun et al.

Summary: The impact of process variables and thermal annealing on the tensile strength of composite carbon fiber polylactic acid thermoplastics was investigated, and it was found that thermal annealing can improve the mechanical properties of the material under specific process parameters.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Engineering, Aerospace

Compressive Behaviour of 3D-Printed PETG Composites

Sara Valvez et al.

Summary: This study investigates the mechanical behavior of 3D-printed PETG composites reinforced with carbon or Kevlar fibers, specifically focusing on compression. Through static, stress relaxation, and creep tests, it was found that the addition of fibers reduced the yield compressive strength and compressive displacement, while increasing the compressive modulus. The stress relaxation behavior showed a decrease in compressive stresses over time, while the creep response resulted in greater compressive displacement. The presence of fibers amplified these effects.

AEROSPACE (2022)

Add to Collection

Proceedings Paper Construction & Building Technology

Annealing effect on mechanical properties of 3D printed composites

S. Valvez et al.

Summary: The study investigates the effect of thermal annealing on the bending properties of PETG and PETG reinforced materials, showing that the best results were achieved at 90 degrees Celsius for 30 minutes.

4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2021) (2022)

Add to Collection

Article Materials Science, Composites

Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling

Anouar El Magri et al.

Summary: The study focused on the influence of nozzle temperature and infill line orientations on parts made with short carbon fiber-reinforced polylactic acid, as well as the effects of annealing on crystallinity and mechanical properties. Results showed that high nozzle temperature and specific infill orientations can improve tensile properties, while annealing can increase crystallinity and Young's modulus.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

3D-printing of architectured short carbon fiber-geopolymer composite

Siqi Ma et al.

Summary: A novel approach combining 3D printing technology and Bouligand structure design was used to fabricate lightweight, high strength, and superior toughness CsfGP composites, showing outstanding mechanical properties with consistent fiber orientation distribution and sophisticated interfaces.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Review Polymer Science

Fused Filament Fabrication-4D-Printed Shape Memory Polymers: A Review

Sara Valvez et al.

Summary: Additive manufacturing (AM) produces components/structures layer-by-layer, with 4D printing combining 3D printing with time to create additively manufactured components that respond to external stimuli using shape-memory materials. Shape memory polymers (SMPs) are the most suitable materials for additive manufacturing, with shape memory polymer compounds (SMPCs) serving as an effective alternative. Fused filament fabrication (FFF) is the most widely used additive manufacturing technique.

POLYMERS (2021)

Add to Collection

Article Polymer Science

Creep and Recovery Behavior of Continuous Fiber-Reinforced 3DP Composites

Ans Al Rashid et al.

Summary: The study investigates the effects of different fiber reinforcements and temperatures on the creep and recovery behavior of CFR3DP Onyx composites, showing that fiber reinforcement improves strength but affects creep resistance at high temperatures.

POLYMERS (2021)

Add to Collection

Review Materials Science, Composites

Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review

M. Ahmadifar et al.

Summary: This review paper provides recent developments in the Fused Filament Fabrication (FFF) approach for composite materials, focusing on influencing parameters and their impact on the strength/bonding or physicochemical characterizations of FFF-fabricated parts. An overview of the mechanical properties of printed parts for different composite material systems is presented and discussed. The study considers three types of reinforced polymers in FFF process: filled reinforced polymers, continuous fiber-reinforced polymers, and short fiber reinforced polymers.

APPLIED COMPOSITE MATERIALS (2021)

Add to Collection

Article Mechanics

Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours

I Tirado-Garcia et al.

Summary: This study focuses on the mechanical, electrical, and thermal behaviors of 3D printed polymeric composites filled with carbon black conductive particles, investigating the influence of printing direction on material properties and identifying strong thermo-electro-mechanical interplays.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Chemistry, Physical

The Effect of Annealing on Additive Manufactured ULTEM™ 9085 Mechanical Properties

Yongjie Zhang et al.

Summary: FFF is increasingly used in aviation industry for manufacturing end use parts, though mainly for low criticality lightly loaded parts due to poor mechanical performance. To improve mechanical properties, thermal annealing is commonly used, but issues like distortion and the need for jigs limit its effectiveness. This research proposes a novel low temperature thermal annealing method to enhance mechanical performance of FFF parts without significant distortion, as demonstrated by improved tensile strength and reduced strain concentration in annealed coupons.

MATERIALS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM

K. Sathish Kumar et al.

Summary: This study investigates the effect of FDM infill density on the mechanical properties of PETG and CFPETG samples, showing that a 100% infill density enhances hardness, tensile strength, impact strength, and flexural strength. Subsequent annealing increases interlayer diffusion bonding, further enhancing mechanical properties.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Manufacturing

Effect of FDM process parameters on mechanical properties of 3D-printed carbon fibre-PLA composite

M. Kamaal et al.

Summary: This study investigates the effect of process parameters of the FDM method on the mechanical properties of 3D-printed CF-reinforced PLA composite, and conducts multi-optimization using TOPSIS analysis to find the optimal parameter set.

PROGRESS IN ADDITIVE MANUFACTURING (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review

G. D. Goh et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)

Add to Collection

Article Polymer Science

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

Anouar El Magri et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Mechanics

Mechanical performance of an optimized cork agglomerate core -glass fibre sandwich

P. N. B. Reis et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Recent developments in polymers/polymer nanocomposites for additive manufacturing

H. Wu et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Review Polymer Science

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Sachini Wickramasinghe et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Mechanical

Study of the annealing influence on the mechanical performance of PA12 and PA12 fibre reinforced FFF printed specimens

Isaac Ferreira et al.

RAPID PROTOTYPING JOURNAL (2020)

Add to Collection

Article Polymer Science

Thermal Insulation and Mechanical Properties of Polylactic Acid (PLA) at Different Processing Conditions

Mohamed Saeed Barkhad et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Manufacturing

Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics

Javaid Butt et al.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)

Add to Collection

Proceedings Paper Engineering, Mechanical

3D printed continuous carbon fiber reinforced PLA composites: A short review

S. Valvez et al.

1ST VIRTUAL CONFERENCE ON STRUCTURAL INTEGRITY (VCSI1) (2020)

Add to Collection

Article Physics, Applied

Improvement of flexural strength and compressive strength by heat treatment of PLA filament for 3D-printing

Jeong-Hyo Hong et al.

MODERN PHYSICS LETTERS B (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process

Leipeng Yang et al.

SYNTHETIC METALS (2019)

Add to Collection

Article Materials Science, Composites

Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly (lactic) acid-based filament for 3D printing

Rumiana Kotsilkova et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

Bin Hu et al.

MECHANICS OF MATERIALS (2019)

Add to Collection

Article Automation & Control Systems

Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts

Sunpreet Singh et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Manufacturing

Multifractal Analysis of Image Profiles for the Characterization and Detection of Defects in Additive Manufacturing

Bing Yao et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Chemistry, Physical

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment

Aboma Wagari Gebisa et al.

MATERIALS (2018)

Add to Collection

Article Polymer Science

Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties

Peng Geng et al.

POLYMERS (2018)

Add to Collection

Article Engineering, Industrial

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Chuncheng Yang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Engineering, Mechanical

Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints

Volkan Kovan et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Mechanical

Effect of layer thickness on irreversible thermal expansion and interlayer strength in fused deposition modeling

Anthony A. D'Amico et al.

RAPID PROTOTYPING JOURNAL (2017)

Add to Collection

Article Chemistry, Physical

Understanding the Stress Relaxation Behavior of Polymers Reinforced with Short Elastic Fibers

Numaira Obaid et al.

MATERIALS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications

Jasgurpreet Singh Chohan et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Engineering, Manufacturing

Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques

Michael Dawoud et al.

JOURNAL OF MANUFACTURING PROCESSES (2016)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of annealing on the thermal properties of poly (lactic acid)/starch blends

Shanshan Lv et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives

Jonathan Torres et al.

JOM (2015)

Add to Collection

Article Materials Science, Biomaterials

Analysis of the Mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites

R. A. Braga et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Add to Collection

Article Engineering, Mechanical

Effect of adherends and environment on static and transverse impact response of adhesive lap joints

P. N. B. Reis et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)

Add to Collection

Article Engineering, Manufacturing

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

Omar A. Mohamed et al.

ADVANCES IN MANUFACTURING (2015)

Add to Collection

Article Engineering, Chemical

Effects of Fiber Size on Short-Term Creep Behavior of Wood Fiber/HDPE Composites

Wei-Hong Wang et al.

POLYMER ENGINEERING AND SCIENCE (2015)

Add to Collection

Article Materials Science, Composites

Highly oriented carbon fiber-polymer composites via additive manufacturing

Halil L. Tekinalp et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The importance of carbon fiber to polymer additive manufacturing

Lonnie J. Love et al.

JOURNAL OF MATERIALS RESEARCH (2014)

Add to Collection

Article Engineering, Multidisciplinary

Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials

Angel R. Torrado Perez et al.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2014)

Add to Collection

Article Materials Science, Composites

Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin

J. A. M. Ferreira et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process

Antreas Kantaros et al.

MATERIALS & DESIGN (2013)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Research on the Interlayer Stress and Warpage Deformation in FDM

Peng Anhua

MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4 (2012)

Add to Collection

Article Engineering, Mechanical

Effect of processing conditions on the bonding quality of FDM polymer filaments

Q. Sun et al.

RAPID PROTOTYPING JOURNAL (2008)

Add to Collection

Article Automation & Control Systems

A model research for prototype warp deformation in the FDM process

Tian-Ming Wang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Characterization & Testing

Tensile creep behaviour of polypropylene fibre reinforced polypropylene composites

S Houshyar et al.

POLYMER TESTING (2005)

Add to Collection

Article Engineering, Industrial

Critical parameters influencing the quality of prototypes in fused deposition modelling

R Anitha et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

Add to Collection

Article Materials Science, Composites

Stress-relaxation behaviour in composites based on short oil-palm fibres and phenol formaldehyde resin

MS Sreekala et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.