4.7 Article

Microstructure evolution and property strengthening of CuCr50 prepared by thermite reduction-electromagnetic casting during the heat treatment process

Journal

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
Volume 24, Issue -, Pages 6533-6544

Publisher

ELSEVIER
DOI: 10.1016/j.jmrt.2023.04.249

Keywords

CuCr50 alloy; Heat treatment; Microstructure; Properties; Precipitated

Ask authors/readers for more resources

A homogeneous CuCr50 alloy ingot with a nonequilibrium solidification structure was prepared by thermite reduction-electromagnetic casting. The effects of heat treatment on the microstructure of the alloy were investigated, and the conductivity, macrohardness, and tensile strength were measured. The optimal heat treatment conditions were determined to be 975℃ for 1 hour for solution treatment and 500℃ for 2 hours for aging treatment. Under these conditions, the CuCr50 alloy exhibited the best hardness, conductivity, and tensile strength.
A homogeneous CuCr50 alloy ingot prepared in situ by thermite reduction-electromagnetic casting is a type of nonequilibrium solidification structure with a Cu matrix supersaturated with Cr. In this study, the effects of heat treatment on the microstructure of the CuCr50 alloy were studied using scanning electron microscopy (SEM), metallography microscopy and transmission electron microscopy (TEM), and the conductivity, macrohardness and tensile strength of the CuCr50 alloy were measured. The obtained results show that the optimal heat treatment conditions are solution treatment (975 & DEG;C for 1 h) and aging treatment (500 & DEG;C for 2 h), for which the hardness, conductivity, and tensile strength of the CuCr50 alloy are the best; the macrohardness is 103.33 HB, the conductivity is 18.60 MS/m, and the tensile strength is 199.72 MPa. TEM characterization showed that nanosized Cr particles were precipitated and dispersed in the Cu matrix after the aging treatment; the relationship between the precipitates and the Cu matrix was incoherent, and Cu dissolved into the Cr phase in the form of a solid solution to strengthen the second Cr phase. & COPY; 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available