4.7 Article

Computationally Efficient Predictive Current Control With Finite Set Extension Using Derivative Projection for IM Drives

Related references

Note: Only part of the references are listed.
Article Engineering, Electrical & Electronic

Latest Advances of Model Predictive Control in Electrical DrivesuPart I: Basic Concepts and Advanced Strategies

Jose Rodriguez et al.

Summary: This article summarizes the most relevant research contributions in the application of model predictive control in electrical drives in recent years. It mainly focuses on three issues: weighting factor calculation, harmonic distortion optimization, and robustness improvement.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Computationally Efficient Fixed Switching Frequency Direct Model Predictive Control

Qifan Yang et al.

Summary: This article presents a direct model predictive control (MPC) method for drive systems with superior steady-state and dynamic performance. The method achieves a steady-state behavior similar or better than that of a linear controller and fast transient responses characteristic of direct controllers.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Latest Advances of Model Predictive Control in Electrical Drives-Part II: Applications and Benchmarking With Classical Control Methods

Jose Rodriguez et al.

Summary: This article presents the application of model predictive control (MPC) in high-performance drives, showing its flexibility and simplicity through examples of different types of motors. It also compares the performance of MPC with classical control techniques, finding that MPC has clear advantages in reducing losses and distortion.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Iterative Gradient Descent-Based Finite Control Set Predictive Current Control With Least-Squares Optimized Duty Cycles

Haotian Xie et al.

Summary: Finite control set predictive current control (FCS-PCC) is a widely used control strategy in electrical drives due to its fast dynamic response and low switching frequency. However, it suffers from high torque and current deviations due to its discrete switching states. This article presents an iterative gradient descent method combined with least-squares optimized duty cycles to improve the steady-state performance of FCS-PCC. Experimental results demonstrate that the proposed algorithm outperforms conventional methods in terms of steady-state and transient performance.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2022)

Article Engineering, Electrical & Electronic

Low-Complexity Multivector-Based Model Predictive Torque Control for PMSM With Voltage Preselection

Xianglin Li et al.

Summary: The article introduces a double-vector-based model predictive torque control method, which proposes a new voltage vector selection strategy, eliminates some computational complexity, and improves steady-state performance.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Data-Driven Recursive Least Squares Estimation for Model Predictive Current Control of Permanent Magnet Synchronous Motors

Anian Brosch et al.

Summary: The paper proposes a data-driven, real-time capable recursive least squares estimation method for the current control of a permanent magnet synchronous motor, which considers the effects of flux linkage and voltage harmonics through suitable feature engineering. Additionally, a compensating scheme for the interlocking time of the inverter is proposed to improve control performance during transients and steady state.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Article Automation & Control Systems

Model Predictive Direct Duty-Cycle Control for PMSM Drive Systems With Variable Control Set

Zhanqing Zhou et al.

Summary: The proposed model predictive direct duty-cycle control strategy based on variable control set establishes direct mapping relations between electromagnetic torque, flux, and three-phase duty cycles, achieving high-precision torque and flux adjustments. The strategy determines duty cycles through a two-stage optimization mechanism, generating virtual vectors with multiple insulated gate bipolar transistor switching patterns. Experimental results demonstrate excellent static and dynamic control performance, acceptable execution efficiency, and relatively good parameter robustness.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

Article Automation & Control Systems

Symmetrical Three-Vector-Based Model Predictive Control With Deadbeat Solution for IPMSM in Rotating Reference Frame

Shin-Won Kang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Article Automation & Control Systems

Assessment of an Improved Finite Control Set Model Predictive Current Controller for Automotive Propulsion Applications

Andreas Andersson et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

An Improved Direct Torque Control of Three-Level Dual Inverter Fed Open-Ended Winding Induction Motor Drive Based on Modified Look-Up Table

Ravi Eswar Kodumur Meesala et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Guidelines for the Design of Finite Control Set Model Predictive Controllers

Petros Karamanakos et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

A General Constant-Switching-Frequency Model-Predictive Control of Multilevel Converters With Quasi-PS-PWM/LS-PWM Output

Dehong Zhou et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

Article Automation & Control Systems

A Comparison of Finite Control Set and Continuous Control Set Model Predictive Control Schemes for Speed Control of Induction Motors

Abdelsalam A. Ahmed et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2018)

Article Engineering, Multidisciplinary

A Variable Switching Point Predictive Current Control Strategy for Quasi-Z-Source Inverters

Petros Karamanakos et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2018)

Article Engineering, Electrical & Electronic

On the Choice of Norm in Finite Control Set Model Predictive Control

Petros Karamanakos et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Article Engineering, Electrical & Electronic

A Universal Multiple-Vector-Based Model Predictive Control of Induction Motor Drives

Yongchang Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

Article Automation & Control Systems

Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives

Yuanlin Wang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Article Engineering, Multidisciplinary

Performance Improvement of Model-Predictive Current Control of Permanent Magnet Synchronous Motor Drives

Yongchang Zhang et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)

Article Engineering, Electrical & Electronic

Computationally Efficient DMPC for Three-Level NPC Back-to-Back Converters in Wind Turbine Systems With PMSG

Zhenbin Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Three-Vector-Based Low-Complexity Model Predictive Direct Power Control Strategy for Doubly Fed Induction Generators

Xiaohe Wang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Model Predictive Control MPC's Role in the Evolution of Power Electronics

Samir Kouro et al.

IEEE INDUSTRIAL ELECTRONICS MAGAZINE (2015)

Article Automation & Control Systems

Finite-Control-Set Model Predictive Torque Control With a Deadbeat Solution for PMSM Drives

Wei Xie et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

Article Automation & Control Systems

Model-Based Predictive Direct Control Strategies for Electrical Drives: An Experimental Evaluation of PTC and PCC Methods

Fengxiang Wang et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2015)

Article Engineering, Electrical & Electronic

Generalized Two-Vector-Based Model-Predictive Torque Control of Induction Motor Drives

Yongchang Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

Article Automation & Control Systems

Modulated Model Predictive Control for a Seven-Level Cascaded H-Bridge Back-to-Back Converter

Luca Tarisciotti et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2014)

Article Engineering, Electrical & Electronic

Model Predictive Direct Speed Control with Finite Control Set of PMSM Drive Systems

Matthias Preindl et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2013)

Article Automation & Control Systems

Fast Model Predictive Control Using Online Optimization

Yang Wang et al.

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2010)

Article Automation & Control Systems

Model Predictive Direct Torque Control-Part I: Concept, Algorithm, and Analysis

Tobias Geyer et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2009)

Article Automation & Control Systems

Constrained state estimation for nonlinear discrete-time systems: Stability and moving horizon approximations

CV Rao et al.

IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2003)