Related references
Note: Only part of the references are listed.Investigation on dry sliding wear behavior of AA5083/nano-Al2O3 metal matrix composites
R. Suresh et al.
REVISTA DE METALURGIA (2022)
Wear behavior of metal matrix nanocomposites
Ahmad Ghahremani et al.
CERAMICS INTERNATIONAL (2022)
Study on mechanical characteristics of the nano-TiC reinforced Al6061 metal matrix composites
Santhi M. George et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Analyzing the hardness and wear properties of SiC and hBN reinforced aluminum hybrid nanocomposites
Parthiban Krishnan et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Investigation on the Effect of Stirring Process Parameters on the Dispersion of SiC Particles Inside Melting Crucible
Vishal R. Mehta et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Studies on the Influence of Stirrer Blade Design on the Microstructure and Mechanical Properties of a Novel Aluminum Metal Matrix Composite
Pradeep Kumar Krishnan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)
Ultrasonically Stir Cast SiO2/A356 Metal Matrix Nanocomposites
Massoud Malaki et al.
METALS (2021)
Wettability in Metal Matrix Composites
Massoud Malaki et al.
METALS (2021)
Structural, mechanical and tribological properties of Cu-ZrO2/GNPs hybrid nanocomposites
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2020)
Influence of reinforcement incorporation approach on mechanical and tribological properties of AA6061-CNT nanocomposite fabricated via FSP
Abhishek Sharma et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Advanced Metal Matrix Nanocomposites
Massoud Malaki et al.
METALS (2019)
Roles of alloying elements in wetting of SiC by Al
Qin An et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Reinforcement size dependence of mechanical properties and strengthening mechanisms in diamond reinforced titanium metal matrix composites
Farhad Saba et al.
COMPOSITES PART B-ENGINEERING (2019)
Applying Taguchi method to study the wear behaviour of ZA-27 alloy-based composites reinforced with SiC nanoparticles
Mohammed A. Almomani et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2019)
Investigation of impeller design and flow structures in mechanical stirring of molten aluminum
Takuya Yamamoto et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Wear behaviour and morphology of stir cast aluminium/SiC nanocomposites
Md Tanwir Alam et al.
MATERIALS RESEARCH EXPRESS (2018)
Thermal, corrosion and wear analysis of copper based metal matrix composites reinforced with alumina and graphite
R. Venkatesh et al.
DEFENCE TECHNOLOGY (2018)
Investigation on the Tensile Strength and Microhardness of AA6061/TiC Composites by Stir Casting
J. Jebeen Moses et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
Wear Characteristics of Al5083 Surface Hybrid Nano-composites by Friction Stir Processing
N. Yuvaraj et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
Synthesis and characterization of graphene nanoplatelets reinforced AA7068 matrix nanocomposites produced by liquid metallurgy route
Mohammad Alipour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Ultrasonic assisted hot metal powder compaction
Rezvan Abedini et al.
ULTRASONICS SONOCHEMISTRY (2017)
Experiments on the wear characteristics of A356 MMNCs fabricated using ultrasonic cavitation
Suneel Donthamsetty et al.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2017)
Wear behavior of Al 5252 alloy reinforced with micrometric and nanometric SiC particles
Mohammad Moazami-Goudarzi et al.
TRIBOLOGY INTERNATIONAL (2016)
Effect of Ca addition on interface formation in Al(Ca)/Al2O3 composites prepared by gas pressure assisted infiltration
M. Nosko et al.
MATERIALS & DESIGN (2016)
Aluminum Matrix Composites for Industrial Use: Advances and Trends
S. T. Mavhungu et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017) (2016)
Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: A comparative study focusing on particle capture in matrix
M. Karbalaei Akbari et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
Lian-Yi Chen et al.
NATURE (2015)
In situ observation and analysis of ultrasonic capillary effect in molten aluminium
I. Tzanakis et al.
ULTRASONICS SONOCHEMISTRY (2015)
A review of ultrasonic peening treatment
Massoud Malaki et al.
MATERIALS & DESIGN (2015)
The Role of Dry Aero-acoustical Lubrication and Material Softening in Ultrasonically Assisted Milling of Difficult-to-Cut AISI 304 Steels
Parviz Sarvi Hampa et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2015)
Study of the Behavior of Ultrasonic Piezo-Ceramic Actuators by Simulations
Amir Abdullah et al.
ELECTRONIC MATERIALS LETTERS (2014)
Reciprocating wear behavior of 7075Al/SiC in comparison with 6061Al/Al2O3 composites
Jayakumar Lakshmipathy et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
A New Approach to Ultrasonic Degassing to Improve the Mechanical Properties of Aluminum Alloys
H. Puga et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Dry sliding tribological behavior and mechanical properties of Al2024-5 wt.%B4C nanocomposite produced by mechanical milling and hot extrusion
Alireza Abdollahi et al.
MATERIALS & DESIGN (2014)
Nano-sized aluminum oxide reinforced commercial casting A356 alloy matrix: Evaluation of hardness, wear resistance and compressive strength focusing on particle distribution in aluminum matrix
M. Karbalaei Akbari et al.
COMPOSITES PART B-ENGINEERING (2013)
Theoretical study and pathways for nanoparticle capture during solidification of metal melt
J. Q. Xu et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2012)
Strength enhancement of the welded structures by ultrasonic peening
Amir Abdullah et al.
MATERIALS & DESIGN (2012)
Compressive and wear resistance of nanometric alumina reinforced copper matrix composites
A. Fathy et al.
MATERIALS & DESIGN (2012)
On the impact of ultrasonic cavitation bubbles
A. Abdullah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2012)
A comparative study on the wear properties of coarse-grained Al6061 alloy and nanostructured Al6061-Al2O3 composites
N. Hosseini et al.
TRIBOLOGY INTERNATIONAL (2012)
Wear behavior of aluminum matrix hybrid nanocomposites fabricated by powder metallurgy
E. Mohammad Sharifi et al.
WEAR (2011)
Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites
C. S. Ramesh et al.
WEAR (2011)
Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing
A. Shafiei-Zarghani et al.
WEAR (2011)
Tribological properties of Al6061-Al2O3 nanocomposite prepared by milling and hot pressing
N. Hosseini et al.
MATERIALS & DESIGN (2010)
The roles of nano-SiO2 particles on the tribological behavior of short carbon fiber reinforced PEEK
G. Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites
Qing Bing Guo et al.
WEAR (2009)
被撤回的出版物: Dry sliding wear behaviour of cast high strength aluminium alloy (Al-Zn-Mg) and hard particle composites (Retracted article. See vol. 450, 2020)
R. N. Rao et al.
WEAR (2009)
An investigation of the effect of SiC reinforcement coating on the wettability of Al/SiC system
C. Tekmen et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Properties and deformation behaviourOf Mg-Y2O3 nanocomposites
C. S. Goh et al.
ACTA MATERIALIA (2007)
Friction and wear performance of newly developed automotive bearing materials under boundary and mixed lubrication regimes
I. Kerr et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2007)
Ultrasonic cavitation based nanomanufacturing of bulk aluminum matrix nanocomposites
Yong Yang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
Computational and experimental analysis of particulate distribution during Al-SiC MMC fabrication
S. Naher et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement
SF Hassan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Effects of reinforcements on sliding wear behavior of aluminum matrix composites
T Miyajima et al.
WEAR (2003)
Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt
GI Eskin et al.
ULTRASONICS SONOCHEMISTRY (2003)
The wettability of SiC particles by molten aluminium alloy
J Hashim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Performance analysis of axial-flow mixing impellers
J Wu et al.
AICHE JOURNAL (2000)
Share Paper
