☆ 4.6 Review

Recent Progress of Film Fabrication Process for Carbon-Based All-Inorganic Perovskite Solar Cells

CRYSTALS (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Recent Progress on Boosting the Perovskite Film Quality of All-Inorganic Perovskite Solar Cells

Ying Chen et al.

Summary: The all-inorganic CsPbX3 perovskite material combines the advantages of advanced light absorption coefficient, long carrier lifetime, and simple preparation process of organic-inorganic perovskite materials with excellent stability under damp heat erosion. It is a competitive direction for the development of perovskite materials. However, there are still challenges in obtaining high power conversion efficiency (PCE) in all-inorganic perovskite thin films. This review systematically summarizes additive engineering, solvent engineering, and interface engineering methods to promote thin film properties and achieve high PCE in recent years.

COATINGS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Inkjet-Printing Controlled Phase Evolution Boosts the Efficiency of Hole Transport Material Free and Carbon-Based CsPbBr3 Perovskite Solar Cells Exceeding 9%

Lihua Zhang et al.

Summary: Hole transport material free carbon-based all-inorganic CsPbBr3 perovskite solar cells are promising for commercialization due to their low-cost, high open-circuit voltage, and superior stability. A scalable fabrication method using inkjet-printing is developed to prepare high-quality CsPbBr3 films, which improves phase purity and crystal stacking. The inkjet-printed CsPbBr3 solar cells achieve high efficiencies, demonstrating the upscaling potential of this method. This work provides insights into the phase evolution mechanisms and crystal growth dynamics of cesium lead bromide halide films.

ENERGY & ENVIRONMENTAL MATERIALS (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Fully Scalable and Stable CsPbI2Br Solar Cells Realized by an All-Spray-Coating Process

David Sunghwan Lee et al.

Summary: This study successfully spray-coats the hole transporting layer (HTL) in fully scalable n-i-p-type metal halide perovskite (MHP) solar cells, achieving high efficiencies and scalability while ensuring uniform coverage and efficient charge extraction. By spray-coating all layers except the Au electrode, high efficiencies are achieved for CsPbI2Br unit cells and submodules, and an all-spray-coating process is demonstrated for submodules.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

Efficient interface engineering of N, N'-Dicyclohexylcarbodiimide for stable HTMs-free CsPbBr3 perovskite solar cells with 10.16%-efficiency

Jingwei Zhu et al.

Summary: By depositing DCC at the PVSK/carbon back interface, an effective interface engineering approach is employed to passivate surface defects, improve contact, and boost the efficiency of carbon-based perovskite solar cells. This modification not only enhances the performance but also ensures long-term stability of the device under harsh conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Synergistic passivation by alkali metal and halogenoid ions for high efficiency HTM-free carbon-based CsPbI2Br solar cells

Zechao Yang et al.

Summary: This study utilizes a synergistic passivation strategy with alkali metal and halogenoid ions in the NaSCN additive to enhance the quality and performance of CsPbI2Br films, effectively reducing nonradiative recombination loss and achieving a champion PCE of 14.63% in all-inorganic CsPbI2Br Perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Tailored graphene quantum dots to passivate defects and accelerate charge extraction for all-inorganic CsPbIBr2 perovskite solar cells

Quanzhu Zhou et al.

Summary: A novel solid-liquid interfacial exfoliation technique has been established to efficiently fabricate high-quality graphene quantum dots, which further enhance the efficiency and stability of all-inorganic perovskite solar cells through functionalization.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Physics, Applied

A modified hybrid chemical vapor deposition method for the fabrication of efficient CsPbBr3 perovskite solar cells

Saad Ullah et al.

Summary: High-quality CsPbBr3 films with good crystallinity and uniformity were successfully fabricated using a modified hybrid chemical vapor deposition method. The CsPbBr3 perovskite solar cells achieved impressive performance, suggesting a promising fabrication route for all-inorganic perovskite thin films in photovoltaic applications.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Add to Collection

Article Energy & Fuels

High-quality and full-coverage CsPbBr3 thin films via electron beam evaporation with post-annealing treatment for all-inorganic perovskite solar cells

Linlin Liu et al.

Summary: All-inorganic cesium lead bromide perovskite solar cells (PSCs) have gained attention due to their superior stability. However, the conventional solution process has limitations in preparing CsPbBr3 films. Therefore, the development of viable evaporation deposition strategies is crucial for enhancing the power conversion efficiency. In this study, high-quality CsPbBr3 films were fabricated using single-source electron beam evaporation and post-annealing treatment.

SOLAR ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Defect healing via a gradient cooling strategy for efficient all-inorganic perovskite solar cells

Jiani Lv et al.

Summary: This article demonstrates a gradient cooling process to improve the structural defects in all-inorganic perovskite films and enhance charge carrier transport by reducing defect density. The results show promising application prospects for this method in all-inorganic perovskite films without a dopant/additive.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A green Bi-Solvent system for processing high-quality CsPbBr3 films in efficient all-inorganic perovskite solar cells

Shibo Wang et al.

Summary: In this study, high-quality CsPbBr3 films were successfully prepared using a sustainable bi-solvent system, and CsPbBr3 solar cells with excellent efficiency and humidity stability were fabricated based on the pinhole-free, ultra-smooth, and high crystallinity films.

MATERIALS TODAY PHYSICS (2022)

Add to Collection

Article Energy & Fuels

Intermediate Phase-Assisted Sequential Deposition Toward 15.24%-Efficiency Carbon-Electrode Cspbi2br Perovskite Solar Cells

Weidong Zhu et al.

Summary: This study proposes a method for preparing high-quality CsPbI2Br films at ambient conditions, which involves an intermediate phase transition and spinodal decomposition reaction to achieve phase stability, full coverage, and micro-sized grains in CsPbI2Br films. The carbon-electrode PSC with the desired CsPbI2Br film exhibits excellent efficiency, photovoltage, and stability.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Pre-Buried Additive for Cross-Layer Modification in Flexible Perovskite Solar Cells with Efficiency Exceeding 22%

Zhonghao Zheng et al.

Summary: Halide perovskites have shown great potential in flexible photovoltaics. However, the performance of flexible perovskite solar cells (F-PSCs) has been limited by interfacial stress and lattice mismatch caused by the deformation of flexible substrates. This study uses ammonium formate as an additive in the electron transport layer to modify the layers and their interface, resulting in improved electron extraction, relaxed strain, and reduced defect densities. As a result, the highest power conversion efficiency reported so far is achieved for F-PSCs.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

A counter electrode modified with renewable carbonized biomass for an all-inorganic CsPbBr3 perovskite solar cell

Linlin Jiang et al.

Summary: In this study, carbonized bacterial cellulose and carbonized macadamia nutshell were combined with carbon paste to fabricate counter electrodes for all-inorganic perovskite solar cells. The performance and stability of the solar cells were improved, indicating the potential applications of biomass-derived carbons in renewable energy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Low temperature-processed stable and high-efficiency carbon-based CsPbI2Br perovskite solar cells by additive strategy

Xinyu Xu et al.

Summary: This study investigates the crystallization kinetics of CsPbI2Br perovskite film under low temperature conditions and discovers the issue of incomplete crystallization during low temperature crystallization. By combining organic molecules with PbI2, the crystallization reaction process can be effectively improved, leading to enhanced crystallinity of the perovskite. As a result, the low-temperature-processed CsPbI2Br perovskite solar cells achieve an efficiency of 10.95% in the FTO/SnO2/CsPbI2Br/carbon architecture, with good stability in air.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Energy & Fuels

Solvent-engineering-processed CsPbIBr2 inorganic perovskite solar cells with efficiency of ∼11%

Haisheng Wang et al.

Summary: A novel solvent engineering strategy was developed to fabricate high-quality CsPbIBr2 films via alcohol-induced rapid crystallization process, enhancing the stability and performance of perovskite solar cells. The addition of CsI additives effectively suppressed the defects and self-doping of the perovskite films. The as-obtained PSCs exhibited a superior long-term stability and achieved a highly promising power conversion efficiency.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Energy level matching between transparent conducting electrodes and the electronic transport layer to enhance performance of all-inorganic CsPbBr3 solar cells

Ruxin Guo et al.

Summary: This study demonstrates the importance of energy level matching and interface roughness in perovskite solar cells (PSCs). The Ta-doped SnO2 films prepared using high target utilization sputtering technology as bottom electrodes show improved power conversion efficiency (PCE) compared to the commonly used TCOs. The suitable energy level matching and low interface roughness contribute to enhanced open-circuit voltage, short-circuit current, and fill factor.

VACUUM (2022)

Add to Collection

Article Chemistry, Physical

Extracting ammonium halides by solvent from the hybrid perovskites with various dimensions to promote the crystallization of CsPbI3 perovskite

Hailiang Wang et al.

Summary: The inorganic CsPbI3 perovskite, with suitable optical bandgap and high chemical stability, has shown great potential as a light absorber in perovskite solar cells. However, the phase instability and composition manipulation of CsPbI3 perovskite film have been major challenges. In this study, a new strategy, involving the extraction of ammonium halide by solvent, was developed to address these issues. The extraction of ammonium halide was found to promote the crystallization of CsPbI3 perovskite and improve the film quality. By combining this method with conventional annealing, the composition of the CsPbI3 perovskite film could be finely manipulated. Moreover, the resulting CsPbI3 perovskite solar cells achieved an efficiency of 15.35%, setting a new record for inorganic C-PSCs.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Tailoring type-II all-in-one buried interface for 1.635V-voltage, all-inorganic CsPbBr3 perovskite solar cells

Xinpeng Yao et al.

Summary: In this study, a SnO2-SnS2 heterojunction nanocrystal was used to heal the defective interface of all-inorganic CsPbBr3 PSCs, resulting in high efficiency and stability.

NANO ENERGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Surface modification of CsPbI2Br for improved performance of inorganic perovskite solar cells

Kalsoom Fatima et al.

Summary: This study presents a method of surface modification of CsPbI2Br layer using isopropanol treatment, which improves the band alignment at the CsPbI2Br/C60 interface, facilitates charge transfer, and enhances the performance and stability of inorganic perovskite solar cells.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All-Inorganic Perovskite and Thermal Annealing-Free Process

Xiaoyu Gu et al.

Summary: This study demonstrates a 2-terminal monolithic perovskite/organic tandem solar cell (TSC) configuration, which incorporates wide bandgap all-inorganic perovskites as front cell absorber and organic blend as rear cell absorber, to extend the absorption range of organic solar cells (OSCs) into high-energy photon region. By optimizing the electron transporting layer and interface structure, high open-circuit voltage and charge transport efficiency are achieved. The remarkable power conversion efficiency (PCE) obtained in this study highlights the potential of this strategy to improve the efficiency of OSCs.

ADVANCED SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in Processing Kinetics for All-Inorganic Halide Perovskite: Towards Efficient and Thermodynamic Stable Solar Cells

Anupriya Singh et al.

Summary: The all-inorganic CsPbX3 perovskite shows potential in addressing the environmental instability issues of hybrid organic-inorganic perovskites, with different crystallographic phases impacting film morphology, device efficiency, and stability.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Laser-accelerated phase transformation in cesium lead iodide perovskite

Zhenni Lin et al.

Summary: Under ambient moisture, high-temperature CsPbI3 can be transformed into its low-temperature phase at significantly higher rates by above-band gap laser illumination compared to moisture-induced transformation alone. Laser illumination without moisture does not trigger the phase transformation but introduces defects that lower the material's photoluminescence intensity and accelerate the high-temperature to low-temperature phase transformation when exposed to moisture.

MATTER (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Fully Scalable and Stable CsPbI2Br Solar Cells Realized by an All-Spray-Coating Process

David Sunghwan Lee et al.

Summary: Spray-coating technique is a scalable and time-efficient method for developing large-area metal halide perovskite solar cells (MHP). In this study, the researchers present a reliable strategy of spray-coating the hole transporting layer (HTL) using MoO2 nanoparticles and poly-(triarylamine) (PTAA) binders to ensure uniform coverage and efficient charge extraction. By spray-coating all layers except the Au electrode, they achieve high and scalable efficiencies for CsPbI2Br unit cells and submodules. Additionally, they demonstrate good long-term stability of the submodules under damp heat conditions.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Modification of Energy Level Alignment for Boosting Carbon-Based CsPbI2Br Solar Cells with 14% Certified Efficiency

Guizhi Zhang et al.

Summary: By modifying the perovskite surface and utilizing a specific spin coating method to prepare thicker perovskite films, the power conversion efficiency and stability of carbon-based all-inorganic perovskite solar cells (C-PSCs) have been successfully improved.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

The Chemical Design in High-Performance Lead Halide Perovskite: Additive vs Dopant?

Yingping Fan et al.

Summary: Metal halide perovskite solar cells have gained significant attention as a promising candidate for future photovoltaics, with various chemicals added during development to enhance performance. However, debates still exist over whether these chemicals act as additives or dopants in the final film. Clarifying the nature of these additives is crucial for designing high-quality perovskite films.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Energy & Fuels

Multi-source cation/anion doping towards efficient carbon-based CsPbIBr2 solar cells with superior open voltage up to 1.37 V

Yixin Guo et al.

Summary: A novel multi-source cation/anion co-doping strategy has been used to improve the performance of CsPbIBr2 solar cell, resulting in a respectable V-oc of 1.37 V and an efficiency of 10.78%. This simple doping strategy not only enhances film quality but also strengthens built-in potential, significantly enhancing V-oc.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Inorganic Ammonium Halide Additive Strategy for Highly Efficient and Stable CsPbI3 Perovskite Solar Cells

Shan Tan et al.

Summary: The study introduces an inorganic additive strategy using ammonium halides to improve crystal quality, interfacial contact, and charge transport ability of CsPbI3 films, resulting in high-efficiency solar cell performance. Long-term stability testing shows the promising potential and advantages of this approach.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Size mismatch induces cation segregation in CsPbI3: Forming energy level gradient and 3D/2D heterojunction promotes the efficiency of carbon-based perovskite solar cells to over 15%

Hailiang Wang et al.

Summary: The study investigates size mismatch-induced cation segregation in CsPbI3, which leads to improved hole selectivity at the CsPbI3/carbon interface, reducing carrier recombination loss in carbon-based perovskite solar cells.

NANO ENERGY (2021)

Add to Collection

Article Engineering, Environmental

Remarkable quality improvement of CsPbIBr2 perovskite film by cellulose acetate addition for efficient and stable carbon-based inorganic perovskite solar cells

Jieqiong Liu et al.

Summary: The introduction of cellulose acetate into CsPbIBr2 perovskite precursor solution can effectively enhance the quality of the perovskite film, resulting in higher crystallinity, larger grain size, and smoother surface. The optimized CsPbIBr2 perovskite film with cellulose acetate shows a champion efficiency of 7.52% and excellent long-term stability in both ambient condition and high-humidity environment.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Low-temperature preparation achieving 10.95%-efficiency of hole-free and carbon-based all-inorganic CsPbI3 perovskite solar cells

Junsen Zhang et al.

Summary: This paper demonstrates the fabrication of hole-free, carbon-based all-inorganic CsPbI3 perovskite solar cells at low temperature, achieving a champion power conversion efficiency of 10.95%. The study also investigates the performance of different ZnO layers and shows the potential for further application in flexible solar cells.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Multidisciplinary Sciences

Generic water-based spray-assisted growth for scalable high-efficiency carbon-electrode all-inorganic perovskite solar cells

Zeyang Zhang et al.

Summary: A water-based spray-assisted growth strategy is proposed for preparing large-area all-inorganic perovskite films for perovskite solar cells, showing record-high efficiencies and excellent operational stability. The strategy is also demonstrated to be suitable for preparing various CsPb compounds with outstanding efficiencies for carbon-electrode PSCs.

ISCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Carbon-based all-inorganic perovskite solar cells: Progress, challenges and strategies toward 20% efficiency

Chen Dong et al.

Summary: Organic-inorganic hybrid perovskite solar cells show promise as next-generation photovoltaic technology, but face challenges such as thermodynamic instability and constituent migration. C-IPSCs based on cesium lead halide inorganic perovskites and a carbon electrode offer stability, efficiency, and long-term operation, making them the most promising PSC architecture for commercialization.

MATERIALS TODAY (2021)

Add to Collection

Article Chemistry, Physical

Composition manipulation boosts the efficiency of carbon-based CsPbI3 perovskite solar cells to beyond 14%

Hailiang Wang et al.

Summary: The study systematically investigated the crystallization processes of DMAI-based CsPbI3 perovskite, revealing that DMA ions tend to form DMAPbI(3) and pre-generated Cs4PbI6 plays a crucial role in stabilizing CsPbI3 phase. These findings help enhance the quality of CsPbI3 film and contribute to achieving a record efficiency of 14.6% in carbon-based CsPbI3 PSCs without hole transporter.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

High-Efficiency Carbon-Based CsPbIBr2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk-Heterojunction Layer

Deng Wang et al.

Summary: By integrating a thin BHJ layer with CsPbIBr2 perovskite, a carbon-based all-inorganic PSC achieves a much higher champion PCE and improved long-term stability, showing great potential for industrialization.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Physical

Exploring the Effect of Lewis-Base Additives on the Performance and Stability of Mesoscopic Carbon-Electrode Perovskite Solar Cells

M. Bidikoudi et al.

Summary: The use of thiourea and urea compounds as additives in Cs-containing mixed-cation, mixed-halide perovskite precursor solution has shown significant improvement in efficiency and film quality of carbon-electrode perovskite solar cells. The optimized additive content resulted in a notable increase in power conversion efficiency and enhanced performance of the devices with triple mesoscopic structure, without the presence of any hole transport layer. The stability study revealed high stability of all devices, with thiourea-containing devices showing a potential increase in efficiency after 48 days of storage due to time-induced recrystallization phenomena.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Small radius electron and hole polarons in PbX2 (X = F, Cl, Br) crystals: a computational study

Yu. A. Mastrikov et al.

Summary: First-principles hybrid density functional theory calculations were used to study the atomic and electronic structures, as well as the energy levels and localization of small radius polarons in PbX2 crystals. The study revealed a shift in hole localization from a single cation in fluorides and chlorides to an anion dimer in bromides, highlighting the delicate balance of ionic and covalent bonding in these materials. The positions of energy levels for self-trapped electrons and holes in the band gap were also determined, along with the role of spin-orbit effects.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Recycling of FTO/TiO2 Substrates: Route toward Simultaneously High-Performance and Cost-Efficient Carbon-Based, All-Inorganic CsPbIBr2 Solar Cells

Weidong Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Efficient CsPbBr3 Planar Perovskite Solar Cells via Additive Engineering with NH4SCN

Deng Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Excellent Moisture Stability and Efficiency of Inverted All-Inorganic CsPbIBr2 Perovskite Solar Cells through Molecule Interface Engineering

Shuzhang Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Electrochemistry

Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc

Xingyue Liu et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Electrochemistry

Flux-mediated growth strategy enables low-temperature fabrication of high-efficiency all-inorganic CsPbIBr2 perovskite solar cells

Weidong Zhu et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

Efficient all-inorganic CsPbI2Br perovskite solar cell with carbon electrode by revealing crystallization kinetics and improving crystal quality

Chong Liu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Energy & Fuels

Enhanced energy level alignment and hole extraction of carbon electrode for air-stable hole-transporting material-free CsPbBr3 perovskite solar cells

Fan Bu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Chemistry, Physical

High Electron Affinity Enables Fast Hole Extraction for Efficient Flexible Inverted Perovskite Solar Cells

Pengbin Ru et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

From Defects to Degradation: A Mechanistic Understanding of Degradation in Perovskite Solar Cell Devices and Modules

Sean P. Dunfield et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment

Hui Li et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Electrochemistry

Optimizing the substrate pre-heating and post-annealing temperatures for fabricating high-performance carbon-based CsPbIBr2 inorganic perovskite solar cells

Guiqiang Wang et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Review Chemistry, Physical

Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells

Jiangzhao Chen et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Self-Elimination of Intrinsic Defects Improves the Low-Temperature Performance of Perovskite Photovoltaics

Yihua Chen et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Lead Halide Perovskite Nanocrystals: Room Temperature Syntheses toward Commercial Viability

Alasdair A. M. Brown et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

One-Step Coating of Full-Coverage CsPbBr3 Thin Films via Mist Deposition for All-Inorganic Perovskite Solar Cells

Yuki Haruta et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Improved charge extraction through interface engineering for 10.12% efficiency and stable CsPbBr3 perovskite solar cells

Jingwei Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

A multifunctional CuSCN interlayer in carbon electrode-based CsPbIBr2all-inorganic perovskite solar cells for boosting the efficiency and stability

Jieqiong Liu et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon electrode engineering for high efficiency all-inorganic perovskite solar cells

Longfei Mi et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

Low-Temperature Processing All-Inorganic Carbon-Based Perovskite Solar Cells up to 11.78% Efficiency via Alkali Hydroxides Interfacial Engineering

Fei Deng et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

All-Inorganic CsPbX3 Perovskite Solar Cells: Progress and Prospects

Jingru Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Physics, Applied

Accelerated hole-extraction in carbon-electrode based planar perovskite solar cells by moisture-assisted post-annealing

Jiaqi Yan et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Band Alignment Engineering Towards High Efficiency Carbon-Based Inorganic Planar CsPbIBr2 Perovskite Solar Cells

Weidong Zhu et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh Durability Perovskite Solar Cells

Congcong Wu et al.

NANO LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites

Juan-Pablo Correa-Baena et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering

Xingyue Liu et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Niobium Incorporation into CsPbI2Br for Stable and Efficient All-Inorganic Perovskite Solar Cells

Zhanglin Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Spray-Coated Colloidal Perovskite Quantum Dot Films for Highly Efficient Solar Cells

Jifeng Yuan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

The Causes of Degradation of Perovskite Solar Cells

Juan Bisquert et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Multidisciplinary Sciences

Thermodynamically stabilized β-CsPbI3-based perovskite solar cells with efficiencies >18%

Yong Wang et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Cs-Doped TiO2 Nanorod Array Enhances Electron Injection and Transport in Carbon-Based CsPbI3 Perovskite Solar Cells

Jiaming Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Defect-Engineering-Enabled High-Efficiency All-Inorganic Perovskite Solar Cells

Jia Liang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Europium and Acetate Co-doping Strategy for Developing Stable and Efficient CsPbI2Br Perovskite Solar Cells

Shaomin Yang et al.

SMALL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Light Processing Enables Efficient Carbon-Based, All-Inorganic Planar CsPbIBr2 Solar Cells with High Photovoltages

Qianni Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Guoqing Tong et al.

NANO ENERGY (2019)

Add to Collection

Article Electrochemistry

Enhanced charge extraction in carbon-based all-inorganic CsPbBr3 perovskite solar cells by dual-function interface engineering

Guodong Su et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Excess Cesium Iodide Induces Spinodal Decomposition of CsPbI2Br Perovskite Films

Xiangyue Meng et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Review Chemistry, Physical

Methods and strategies for achieving high-performance carbon-based perovskite solar cells without hole transport materials

Haining Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Doping strategies for small molecule organic hole-transport materials: impacts on perovskite solar cell performance and stability

Tracy H. Schloemer et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Inorganic CsPbIBr2-Based Perovskite Solar Cells: Fabrication Technique Modification and Efficiency Improvement

Yuxiao Guo et al.

SOLAR RRL (2019)

Add to Collection

Article Multidisciplinary Sciences

Natrium Doping Pushes the Efficiency of Carbon-Based CsPbI3 Perovskite Solar Cells to 10.7%

Sisi Xiang et al.

ISCIENCE (2019)

Add to Collection

Review Chemistry, Physical

Current progress in interfacial engineering of carbon-based perovskite solar cells

Fanning Meng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Energy & Fuels

Promoting the Hole Extraction with Co3O4 Nanomaterials for Efficient Carbon-Based CsPbI2Br Perovskite Solar Cells

Yang Zhou et al.

SOLAR RRL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Elegant Face-Down Liquid-Space-Restricted Deposition of CsPbBr3 Films for Efficient Carbon-Based All-Inorganic Planar Perovskite Solar Cells

Pengpeng Teng et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

All-Ambient Processed Binary CsPbBr3-CsPb2Br5 Perovskites with Synergistic Enhancement for High-Efficiency Cs-Pb-Br-Based Solar Cells

Xisheng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High-Purity Inorganic Perovskite Films for Solar Cells with 9.72% Efficiency

Jialong Duan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Engineering, Environmental

Fast anion-exchange from CsPbI3 to CsPbBr3 via Br-2-vapor-assisted deposition for air-stable all-inorganic perovskite solar cells

Paifeng Luo et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Light Absorption Coefficient of CsPbBr3 Perovskite Nanocrystals

Jorick Maes et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Thermochromic halide perovskite solar cells

Jia Lin et al.

NATURE MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells

Pengyang Wang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Morphology Controlling of All-Inorganic Perovskite at Low Temperature for Efficient Rigid and Flexible Solar Cells

Haixia Rao et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Toward charge extraction in all-inorganic perovskite solar cells by interfacial engineering

Jie Ding et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

Highly Air-Stable Carbon-Based α-CsPbl3 Perovskite Solar Cells with a Broadened Optical Spectrum

Sisi Xiang et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Molecularly thin two-dimensional hybrid perovskites with tunable optoelectronic properties due to reversible surface relaxation

Kai Leng et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Intermolecular Exchange Boosts Efficiency of Air-Stable, Carbon-Based All-Inorganic Planar CsPbIBr2 Perovskite Solar Cells to Over 9%

Weidong Zhu et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Lanthanide Ions Doped CsPbBr3 Halides for HTM-Free 10.14%-Efficiency Inorganic Perovskite Solar Cell with an Ultrahigh Open-Circuit Voltage of 1.594 V

Jialong Duan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

All that glitters is not gold: Recent progress of alternative counter electrodes for perovskite solar cells

Lusheng Liang et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Effect of the conduction band offset on interfacial recombination behavior of the planar perovskite solar cells

Chao Ding et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Solvent engineering for efficient inverted perovskite solar cells based on inorganic CsPbI2Br light absorber

Shasha Zhang et al.

MATERIALS TODAY ENERGY (2018)

Add to Collection

Article Energy & Fuels

A Green Anti-Solvent Process for High Performance Carbon-Based CsPbI2Br All-Inorganic Perovskite Solar Cell

Chen Dong et al.

SOLAR RRL (2018)

Add to Collection

Article Energy & Fuels

Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour

Shenghao Wang et al.

NATURE ENERGY (2017)

Add to Collection

Article Physics, Applied

Annealing effects on CsPbI3-based planar heterojunction perovskite solar cells formed by vacuum deposition method

Kyosuke Yonezawa et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

Unveiling the Crystal Formation of Cesium Lead Mixed-Halide Perovskites for Efficient and Stable Solar Cells

Jae Keun Nam et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Physical

Analysis of self-trapped hole mobility in alkali halides and metal halides

A. I. Popov et al.

SOLID STATE IONICS (2017)

Add to Collection

Article Multidisciplinary Sciences

Thin single crystal perovskite solar cells to harvest below-bandgap light absorption

Zhaolai Chen et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Phase Segregation Enhanced Ion Movement in Efficient Inorganic CsPbIBr2 Solar Cells

Wei Li et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Stabilizing the α-Phase of CsPbI3 Perovskite by Sulfobetaine Zwitterions in One-Step Spin-Coating Films

Qi Wang et al.

JOULE (2017)

Add to Collection

Article Chemistry, Physical

Effects of Annealing Conditions on Mixed Lead Halide Perovskite Solar Cells and Their Thermal Stability Investigation

Haifeng Yang et al.

MATERIALS (2017)

Add to Collection

Review Energy & Fuels

Inorganic CsPbI3 Perovskite-Based Solar Cells: A Choice for a Tandem Device

Waqar Ahmad et al.

SOLAR RRL (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon-Based Perovskite Solar Cells without Hole Transport Materials: The Front Runner to the Market?

Haining Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

All-Vacuum-Deposited Stoichiometrically Balanced Inorganic Cesium Lead Halide Perovskite Solar Cells with Stabilized Efficiency Exceeding 11%

Chien-Yu Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Tunable Colloidal Perovskite Nanoplatelets through Variable Cation, Metal, and Halide Composition

Mark C. Weidman et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Temperature Solution-Grown CsPbBr3 Single Crystals and Their Characterization

Yevgeny Rakita et al.

CRYSTAL GROWTH & DESIGN (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Organometal halide perovskite solar cells: degradation and stability

Taame Abraha Berhe et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

All-Inorganic Perovskite Solar Cells

Jia Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

On the application of the tolerance factor to inorganic and hybrid halide perovskites: a revised system

W. Travis et al.

CHEMICAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Hole Transport Layer Free Inorganic CsPbIBr2 Perovskite Solar Cell by Dual Source Thermal Evaporation

Qingshan Ma et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Bandgap-Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells

Rebecca J. Sutton et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Light-Induced Phase Segregation in Halide-Perovskite Absorbers

Daniel J. Slotcavage et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Article Chemistry, Physical

CsPblBr2 Perovskite Solar Cell by Spray-Assisted Deposition

Cho Fai Jonathan Lau et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Article Energy & Fuels

Defects in perovskite-halides and their effects in solar cells

James M. Ball et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Comparison of Recombination Dynamics in CH3NH3PbBr3 and CH3NH3PbI3 Perovskite Films: Influence of Exciton Binding Energy

Ye Yang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

How Important Is the Organic Part of Lead Halide Perovskite Photovoltaic Cells? Efficient CsPbBr3 Cells

Michael Kulbak et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite

Bert Conings et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Inorganic caesium lead iodide perovskite solar cells

Giles E. Eperon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Electronic Properties of Meso-Superstructured and Planar Organometal Halide Perovskite Films: Charge Trapping, Photodoping, and Carrier Mobility

Tomas Leijtens et al.

ACS NANO (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Improved Understanding of the Electronic and Energetic Landscapes of Perovskite Solar Cells: High Local Charge Carrier Mobility, Reduced Recombination, and Extremely Shallow Traps

Hikaru Oga et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties

Constantinos C. Stoumpos et al.

INORGANIC CHEMISTRY (2013)

Add to Collection

Article Energy & Fuels

Consensus stability testing protocols for organic photovoltaic materials and devices

Matthew O. Reese et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.