☆ 4.6 Article

Tunable Phase Structure in Mn-Doped Lead-Free BaTiO3 Crystalline/Amorphous Energy Storage Thin Films

CRYSTALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Synergistic effect enhances energy storage properties of BNT-based relaxor ferroelectric thin films

Hsin Wang et al.

Summary: In this study, lead-free thin film capacitors with high energy density and efficiency were fabricated. The introduction of Mn ions compensated for valence unbalances and improved the performance of the films. The BNT-SBT-2% Mn film showed a high recoverable energy density of 85.35 J/cm3 and an enhanced energy efficiency of 73.17% under an electric field of 3114 kV/cm. It also displayed good stability in frequency, temperature, and fatigue, making it a promising candidate for advanced power systems.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Physics, Applied

Ultra-high energy storage density of transparent capacitors based on linear dielectric ZrO2 thin films with the thickness scaled up to hundreds nanometers

Yanbin Wang et al.

Summary: This paper reports a transparent capacitor based on linear dielectric ZrO2 thin films with high energy storage density. The capacitors show excellent dielectric energy storage performance, high energy density and efficiency, as well as good transparency for potential applications in transparent electronics.

APPLIED PHYSICS LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Optimized energy-storage performance in Mn-doped Na0.5Bi0.5TiO3-Sr0.7Bi0.2TiO3 lead-free dielectric thin films

Jun Wang et al.

Summary: Mn doping can improve the insulation performance and ferroelectric properties of thin films, leading to enhanced energy storage density and efficiency. Furthermore, it allows ordered B-site cation displacement to be maintained within a certain scale.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Microcrystalline structure modulation and energy storage properties of BaZr0.25Ti0.75O3 thin films

Huihuang Xu et al.

Summary: Lead-free BaZr0.25Ti0.75O3 films grown via a sol-gel method on Pt/Ti/SiO2/Si substrates exhibit good microstructure and energy storage performance, with moderate polarization and high breakdown strength, as well as excellent temperature stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Amorphous/Crystalline Engineering of BaTiO3-Based Thin Films for Energy-Storage Capacitors

Dongxu Li et al.

Summary: Pb-free 0.92BT-0.08BMZ thin films with coexisting amorphous and crystalline phases achieved through annealing temperature control show great potential for energy storage.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

A slush-like polar structure for high energy storage performance in a Sr0.7Bi0.2TiO3 lead-free relaxor ferroelectric thin film

Jin Luo et al.

Summary: In this study, the atomistic structure of a Sr0.7Bi0.2TiO3 lead-free relaxor ferroelectric thin film was investigated using aberration-corrected scanning transmission electron microscopy. A slush-like polar structure was discovered, which was proposed to be the mechanism for the high energy storage performance of the material. These findings contribute to the understanding of the atomic-scale structure of relaxor ferroelectrics and provide guidance for the development of new relaxor ferroelectrics with high energy storage performance.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Deferred Polarization Saturation Boosting Superior Energy-Storage Efficiency and Density Simultaneously under Moderate Electric Field in Relaxor Ferroelectrics

Jing Shi et al.

Summary: This study developed high-temperature dielectric materials based on Bi0.5Na0.5TiO3 (BNT) near the morphotropic phase boundary, which exhibit excellent energy storage performance. The random distribution of polar nanoregions induced by composition modulation disrupts the long-range dipolar alignment and weakens the coupling between ferroelectric domains, resulting in slender and deferred polarization-electric field hysteresis loops with relatively high saturation polarization. The relaxors in this study demonstrate reversible nano-domain orientation and growth, leading to negligible remnant polarization and superior energy storage properties, outperforming state-of-the-art dielectric energy storage materials under similar conditions.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Thin-Film Ferroelectrics

Abel Fernandez et al.

Summary: The study of ferroelectric oxides has made significant advances in the past 30 years, particularly in the field of epitaxial thin-film-based studies. These studies have led to the understanding of ferroelectric physics and the development of novel polar structures and functionalities. The application of advanced synthesis, characterization, and simulations of epitaxial thin films has provided new insights and applications across different length scales. Researchers are now focused on applying these findings in various applications, including memory and logic architectures, as well as energy conversion devices.

ADVANCED MATERIALS (2022)

Add to Collection

Article Physics, Applied

Perspectives on domain engineering for dielectric energy storage thin films

Yiqian Liu et al.

Summary: Dielectric energy storage capacitors require high energy density and efficiency. This Perspective focuses on state-of-the-art dielectric energy storage films within the framework of domain engineering, outlining generally applicable strategies and providing examples of how they enhance energy storage through modulation of domain sizes and symmetries. The potential for further improvements through domain engineering and beyond is also discussed.

APPLIED PHYSICS LETTERS (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of (Zn, Mn) co-doping on the structure and ferroelectric properties of BiFeO3 thin films

Xia-Li Liang et al.

Summary: By co-doping Zn and Mn ions, the grain size and number of defects of BFZMO thin films were decreased, resulting in reduced leakage current density and improved ferroelectric properties.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

High-performance (Na0.5Bi0.5)(Ti0.97Fe0.03)O3-based heterostructure thin films for energy storage capacitors

Shibing Xiao et al.

Summary: This study presents a simple method to fabricate thin films with a compositional graded sequence, and finds that the up-graded film shows improved energy storage properties, with further enhancement after aging.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of Mn-doping on the morphological and electrical properties of (Ba0.7Sr0.3) (MnxTi1-x)O3 materials for energy storage application

Saumya Shalu et al.

Summary: Lead-free (Ba0.7Sr0.3) (MNxTi1-x)O-3 ceramics were synthesized using the sol-gel process. The study found that doping Mn suppresses grain size and growth rate, and the dielectric and ferroelectric properties increase first and then decrease with increasing Mn content. The 2% Mn-doped sample exhibited the best dielectric and energy storage performance.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Engineering, Environmental

Superior energy storage BaTiO3-based amorphous dielectric film with polymorphic hexagonal and cubic nanostructures

Xuewen Jiang et al.

Summary: An effective route to improve energy storage performance is by constructing polymorphic nanostructures. The appropriate volume fraction of amorphous/crystalline structure is confirmed to be conducive to energy storage properties. Mn dopant in the 0.94BT-0.06BZZ films induces higher polarization and leads to a high energy density and improved energy efficiency. The confirmation of amorphous structure and local polymorphic nanostructures using aberration-corrected scanning transmission electron microscopy contributes significantly to enhanced energy storage properties and provides a new design paradigm for high-performance dielectric materials.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Excellent Energy Storage Performance in Bi(Fe0.93Mn0.05Ti0.02)O3 Modified CaBi4Ti4O15 Thin Film by Adjusting Annealing Temperature

Tong Liu et al.

Summary: In this work, new lead-free bismuth layer-structured ferroelectric thin films of CBTi-BFO were prepared via chemical solution deposition. The effects of annealing temperature on the energy storage performances of the films were investigated. The optimized CBTi-BFO film showed excellent fatigue endurance, thermal stability, and frequency stability, making it suitable for high energy density storage applications.

NANOMATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Activation energy and its fluctuations at grain boundaries of Er3+:BaTiO3 perovskite thin films: Effect of doping concentration and annealing temperature

J. L. Clabel H et al.

Summary: The grain growth kinetics in Erbium-doped Barium Titanate (BTE) thin films were influenced by doping and thermal treatment, leading to increased activation energy and grain size, as well as fluctuations in surface roughness. Different BTE thin films showed varying grain growth exponents and activation energies, closely related to the behavior of BaTiO3.

VACUUM (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of Mn doping on the leakage current mechanisms and resistance degradation behavior in lead zirconate titanate films

Betul Akkopru-Akgun et al.

Summary: The electrical reliability of lead zirconate titanate (PZT) films was improved by incorporating Mn, resulting in increased dielectric breakdown lifetimes and activation energy. The study focused on the correlation between defect chemistry and resistance degradation to understand the mechanisms behind enhanced electrical reliability. Both Poole-Frenkel emission and Schottky emission were identified as controlling factors for leakage current at different electric field strengths.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Ceramics

Ultra-high energy storage density and enhanced dielectric properties in BNT-BT based thin film

Yanjiang Xie et al.

Summary: The Mn modified BNT-BT-Mn6 thin films exhibit significantly enhanced breakdown strength, maximum polarization, giant energy storage density, and high permittivity, suggesting their potential as lead-free materials for energy storage devices.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives

Ge Wang et al.

Summary: The importance of dielectric capacitors in high energy storage, specifically focusing on the development of traditional lead-free capacitors and dielectric ceramics for high-temperature applications. The paper discusses key factors to improve energy storage properties and emphasizes the need for new materials in high power/energy density capacitor applications in the future.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

The energy-storage performance and dielectric properties of (0.94-x) BNT-0.06BT-xST thin films prepared by sol-gel method

Yanjiang Xie et al.

Summary: By controlling the amount of SrTiO3 introduced into the BNT-BT thin films, the maximum polarization and dielectric properties of the films can be enhanced, leading to high energy-storage density and low dielectric loss under certain conditions.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Modifying energy storage performances of new lead-free system ferroelectric capacitors through interfacial stress

Zixiong Sun et al.

Summary: Ferroelectric energy storage is a research hotspot in functional materials, and strategies for better performance include structure design and multi-element doping. Epitaxially grown Sm-doped BaZr0.2Ti0.8O3 thin films on substrates have shown improved energy storage density and efficiency. The interfacial stress between films and substrates and the effect of Sm doping on ferroelectric behavior have been discussed, offering a promising candidate for next-generation functional materials.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Review Materials Science, Ceramics

Progress and perspectives in dielectric energy storage ceramics

Dongxu Li et al.

Summary: Dielectric ceramic capacitors are considered promising candidates for solid-state pulse power systems due to their high power density, fast charge-discharge capability, excellent fatigue endurance, and good high temperature stability. This review investigates the energy storage performances of various dielectric materials through chemical modification, macro/microstructural design, and electrical property optimization. Research progress on ceramic bulks and films for both Pb-based and Pb-free systems is summarized, providing perspectives on future development of energy storage ceramics for pulse power capacitors.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Chemistry, Physical

Achieving an ultra-high capacitive energy density in ferroelectric films consisting of superfine columnar nanograins

Yuyao Zhao et al.

Summary: This study demonstrates optimal polarization-electric field behavior in perovskite BaTiO3 films with superfine columnar nanograins, which exhibit small remnant polarization and delayed polarization saturation. These film capacitors show high recyclable energy density, efficiency, and cycling stabilities, making them suitable for a broad range of applications.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

High-performance lead-free bulk ceramics for electrical energy storage applications: design strategies and challenges

Zetian Yang et al.

Summary: Dielectric capacitors are considered promising devices for storing electrical energy in pulsed power systems due to their fast charge/discharge rates and high power density. Extensive efforts have been made to develop high-performance dielectric materials, such as lead-free bulk ceramics, for energy storage applications. Design strategies and optimization of energy storage performance are crucial, while challenges and future prospects are also present.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Materials Science, Multidisciplinary

X-ray photoelectron spectroscopy: Towards reliable binding energy referencing

G. Greczynski et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallization behavior of amorphous BaTiO3 thin films

Gyung Hyun Ryu et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Energy storage performance of flexible NKBT/NKBT-ST multilayer film capacitor by interface engineering

Jin Qian et al.

NANO ENERGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of manganese (Mn) substitution on structural, infrared and dielectric properties of BaTiO3nanoceramics

Smita P. More et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Chemistry, Physical

Fatigue-Free and Bending-Endurable Flexible Mn-Doped Na0.5Bi0.5TiO3-BaTiO3-BiFeO3 Film Capacitor with an Ultrahigh Energy Storage Performance

Changhong Yang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Perovskite lead-free dielectrics for energy storage applications

Letao Yang et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Ceramics

Novel BiAlO3 dielectric thin films with high energy density

Zongxin Li et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

The microstructure and energy storage properties of Ba0.3Sr0.7TiO3 crystallite thin films

Jing Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Multidisciplinary Sciences

Ultrahigh-energy density lead-free dielectric films via polymorphic nanodomain design

Hao Pan et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Growth process and grain boundary defects in Er doped BaTiO3 processed by EB-PVD: A study by XRD, FTIR, SEM and AFM

J. L. H. Clabel et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Ferroelectric-Dielectric Multilayered Thin Films for Energy Storage Capacitors

Jose P. B. Silva et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Enhanced energy storage and fast discharge properties of BaTiO3 based ceramics modified by Bi(Mg1/2Zr1/2)O3

Xuewen Jiang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Design of an all-inorganic flexible Na0.5Bi0.5TiO3-based film capacitor with giant and stable energy storage performance

Changhong Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Glass-ceramic dielectric materials with high energy density and ultra-fast discharge speed for high power energy storage applications

Shaohui Liu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving ultrahigh energy storage performance in bismuth magnesium titanate film capacitors via amorphous-structure engineering

Juan Xie et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High Energy Storage Performance of Opposite Double-Heterojunction Ferroelectricity-Insulators

Tiandong Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

High energy-storage density of lead-free BiFeO3 doped Na0.5Bi0.5TiO3-BaTiO3 thin film capacitor with good temperature stability

Zhenhua Tang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Physics, Applied

Energy storage properties in BaTiO3-Bi3.25La0.75Ti3O12 thin films

B. B. Yang et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh Energy Storage Performance of Lead-Free Oxide Multilayer Film Capacitors via Interface Engineering

Zixiong Sun et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Scale-up and optimization of HfO2-ZrO2 solid solution thin films for the electrostatic supercapacitors

Keum Do Kim et al.

NANO ENERGY (2017)

Add to Collection

Article Physics, Applied

Mn doping to enhance energy storage performance of lead-free 0.7NBT-0.3ST thin films with weak oxygen vacancies

Yulei Zhang et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Homogeneous/Inhomogeneous-Structured Dielectrics and their Energy-Storage Performances

Zhonghua Yao et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Core-Shell Structured Biopolymer@BaTiO3 Nanoparticles for Biopolymer Nanocomposites with Significantly Enhanced Dielectric Properties and Energy Storage Capability

Yanyan Fan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Add to Collection

Article Physics, Applied

Decisive role of oxygen vacancy in ferroelectric versus ferromagnetic Mn-doped BaTiO3 thin films

Yao Shuai et al.

JOURNAL OF APPLIED PHYSICS (2011)

Add to Collection

Article Materials Science, Coatings & Films

Studies of pulsed laser deposition processes of BaTiO3 thin films

T. Garcia et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Ceramics

XPS analysis of submicrometer barium titanate powder

M Wegmann et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.