☆ 4.6 Article

Requirements for Dental CAD Software: A Survey of Korean Dental Personnel

APPLIED SCIENCES-BASEL (2023)

Related references

Note: Only part of the references are listed.

Article Dentistry, Oral Surgery & Medicine

Reliability of automatic finish line detection for tooth preparation in dental computer-aided software

Hang-Nga Mai et al.

Summary: The accuracy of automatic tooth finish line registration was compared to manual registration, considering various finish line configurations and dental CAD software. The study found that the automatic method exhibited larger errors than the manual method, especially with high finish line roundness and obtuse edge angles. The choice of CAD software affected the registration accuracy in the automatic method, but not in the manual method.

JOURNAL OF PROSTHODONTIC RESEARCH (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evaluation of the marginal and internal fit of CAD/CAM crowns designed using three different dental CAD programs: a 3-dimensional digital analysis study

Ra'fat Farah et al.

Summary: This in vitro study assessed and compared the fit of machine-milled crowns designed using three CAD software programs. The results showed that all three programs can design crowns with satisfactory fit, and the InLab program performed better in terms of marginal fit.

CLINICAL ORAL INVESTIGATIONS (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Mechanical stability of dental CAD-CAM restoration materials made of monolithic zirconia, lithium disilicate, and lithium disilicateestrengthened aluminosilicate glass-ceramic with and without fatigue conditions

Nadin Al-Haj Husain et al.

Summary: This in vitro study compared the flexural strength and aging conditions of CAD-CAM zirconia, lithium disilicate, and lithium disilicate-strengthened aluminosilicate glass-ceramics. The results showed that zirconia had the highest mechanical performance, while lithium disilicate-strengthened aluminosilicate glass-ceramic had the lowest. Aging significantly decreased the strength of lithium disilicate and lithium disilicate-strengthened aluminosilicate glass-ceramic.

JOURNAL OF PROSTHETIC DENTISTRY (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

A systematic review of digital removable partial dentures. Part II: CAD/CAM framework, artificial teeth, and denture base

Atsushi Takaichi et al.

Summary: This study reviewed the current status of the digital workflow of removable partial dentures (RPDs) and summarized information about the fabrication methods and material properties. The results showed that using CAD/CAM frameworks and PMMA discs for digital RPDs offer numerous advantages over conventional RPDs.

JOURNAL OF PROSTHODONTIC RESEARCH (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evaluation of the Accuracy of Digital Impressions Obtained from Intraoral and Extraoral Dental Scanners with Different CAD/CAM Scanning Technologies: An In Vitro Study

Passent Ellakany et al.

Summary: The study compared the accuracy of intraoral and extraoral scanners with different scanning technologies, finding that they had similar accuracy overall but extraoral scanners performed better in scanning canines. The smoothness and regularity of teeth surfaces can affect the accuracy of scanning.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2022)

Add to Collection

Article Multidisciplinary Sciences

Trueness of intraoral scanners according to subgingival depth of abutment for fixed prosthesis

Young-Tak Son et al.

Summary: This study aimed to compare the trueness of intraoral scanners (IOSs) based on the subgingival finish line depth for fixed prostheses. The results showed that the use of a gingival displacement cord improved scanning trueness by 90%, especially when the subgingival finish line was deep.

SCIENTIFIC REPORTS (2022)

Add to Collection

Letter Dentistry, Oral Surgery & Medicine

Digital Implant Dentistry Predoctoral Program at University of Kentucky

Ahmad Kutkut et al.

Summary: This report describes the digital implant dentistry program at the University of Kentucky, which has been implemented since 2018. The program includes the use of CBCT for diagnosis and treatment planning, intraoral scanner for digital impressions, and treatment planning software. The laboratory components involve virtual designing and 3D printing of surgical guides. The program has achieved a high success rate of 98% in implant placement.

JOURNAL OF ORAL IMPLANTOLOGY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Ultrathin CAD-CAM glass-ceramic and composite resin occlusal veneers for the treatment of severe dental erosion: An up to 3-year randomized clinical trial

Luis Henrique Schlichting et al.

Summary: The purpose of this study was to evaluate the influence of computer-aided design and computer-aided manufacturing (CAD-CAM) restorative materials (ceramic versus composite resin) on the clinical performance of ultrathin occlusal veneers bonded to worn posterior teeth. The results showed that ceramic and composite resin ultrathin occlusal veneers presented statistically comparable performance, although the composite resin group experienced higher surface degradation.

JOURNAL OF PROSTHETIC DENTISTRY (2022)

Add to Collection

Article Engineering, Biomedical

Morphology and fracture behavior of lithium disilicate dental crowns designed by human and knowledge-based AI

Yanning Chen et al.

Summary: This study compared the occlusal morphology and fracture behavior of lithium disilicate ceramic dental crowns designed by a knowledge-based AI and different human personnel using CAD software. The results showed that human-CAD designed crowns were more similar to the original teeth compared to the AI-generated crowns. All three groups of crown designs achieved clinically acceptable fracture resistance, but most crowns presented catastrophic bulk fracture.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Does cad software affect the marginal and internal fit of milled full ceramic crowns?

Bora Akat et al.

Summary: This study evaluated the marginal and internal fit of milled full ceramic crowns designed with three different CAD systems. The results showed that CAD software had an effect on the marginal fit values of crowns, while no significant difference was observed in terms of the internal fit, except for a single measurement point made from the buccal direction.

BRAZILIAN ORAL RESEARCH (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Marginal and Internal Fit and Intaglio Surface Trueness of Temporary Crowns Fabricated with Stereolithography, Digital Light Processing, and Milling Technology

KeunBaDa Son et al.

Summary: This study evaluated the fit and trueness of temporary crowns fabricated using 3D printing and milling technologies, and analyzed the correlations between fit and trueness. The results showed that high intaglio surface trueness may result in poor marginal fit, especially in the axial region where it can adversely affect both the marginal and internal fit.

INTERNATIONAL JOURNAL OF PROSTHODONTICS (2022)

Add to Collection

Review Health Care Sciences & Services

Where Is the Artificial Intelligence Applied in Dentistry? Systematic Review and Literature Analysis

Andrej Thurzo et al.

Summary: This literature research focuses on the utilization of artificial intelligence (AI) in dental literature from 2011 to 2021. The study quantifies the frequency of AI utilization in dental publications and distinguishes its focus in different dental fields and topics. The findings reveal a significant growth in AI dental publications over the past decade, with radiology, orthodontics, and general scope being the main areas of interest.

HEALTHCARE (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

2D and 3D patient's representation of simulated restorative esthetic outcomes using different computer-aided design software programs: A systematic review

Wenceslao Piedra-Cascon et al.

Summary: This review examined techniques and software programs for diagnostic waxing in restorative procedures, highlighting the ability to integrate facial features and digital diagnostic waxing procedures. Further studies are needed to evaluate the accuracy of virtual representations and esthetic perceptions among dental professionals.

JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparison of CAD-CAM and traditional chairside processing of 4-unit interim prostheses with and without cantilevers: Mechanics, fracture behavior, and fi nite element analysis

Carolina Coelho et al.

Summary: This study compared the effects of CAD-CAM and traditional chairside fabrication on 4-unit interim prostheses, showing that CAD-CAM-manufactured prostheses had higher strength, while the presence of a cantilever structure decreased their strength.

JOURNAL OF PROSTHETIC DENTISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Marginal and Internal Fit of Ceramic Prostheses Fabricated from Different Chairside CAD/CAM Systems: An In Vitro Study

Keunbada Son et al.

Summary: This in vitro study evaluated the marginal and internal fits of ceramic crowns fabricated with different chairside CAD/CAM systems. The study found that all three systems were capable of fabricating clinically acceptable prostheses, with the marginal gap being the most important factor for the marginal fit of prostheses.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Editorial Material Dentistry, Oral Surgery & Medicine

Tooth preparation, digital design and milling process considerations for CAD/CAM crowns: Understanding the transition from analog to digital workflow

Ilser Turkyilmaz et al.

JOURNAL OF DENTAL SCIENCES (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of computer literacy on the working time of the dental CAD software program

KeunBaDa Son et al.

Summary: This study compared the correlation between the teaming effect of dental CAD software and computer literacy in clinical and preclinical experience groups. Results showed that the clinical experience group had faster working time, while the preclinical experience group had a greater reduction in working time. Only the preclinical experience group showed a significant positive correlation between computer literacy and reduction in working time.

JOURNAL OF PROSTHODONTIC RESEARCH (2021)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Application of Artificial Intelligence in Dentistry

T. Shan et al.

Summary: AI is a technology that utilizes machines to mimic intelligent human behavior, and augmented intelligence is proposed as a cognitive extension of AI in health care to assist and supplement medical professionals. Virtual algorithms in dentistry have powerful capabilities in data analysis, expected to improve accuracy and efficacy of diagnosis.

JOURNAL OF DENTAL RESEARCH (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Prediction of learning curves of 2 dental CAD software programs, part 2: Differences in learning effects by type of dental personnel

KeunBaDa Son et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Displacement of Customized Abutments Designed on a Working Cast and in the Oral Cavity: A Comparative In Vivo Study

Hyunho Lee et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2020)

Add to Collection

Article Environmental Sciences

Influence of the CAD-CAM Systems on the Marginal Accuracy and Mechanical Properties of Dental Restorations

Roberto Padros et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Prediction of the learning curves of 2 dental CAD software programs

KeunBaDa Son et al.

JOURNAL OF PROSTHETIC DENTISTRY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Fit of pressed crowns fabricated from two CAD-CAM wax pattern process plans: A comparative in vitro study

Loubna Shamseddine et al.

JOURNAL OF PROSTHETIC DENTISTRY (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Fully automatic CAD design of the occlusal morphology of partial crowns compared to dental technicians' design

Andreas P. Litzenburger et al.

CLINICAL ORAL INVESTIGATIONS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.