☆ 4.6 Review

Unveiling the Performance of Nickel-Titanium Endodontic Instruments through Multimethod Research: A Review

APPLIED SCIENCES-BASEL (2023)

Related references

Note: Only part of the references are listed.

Article Dentistry, Oral Surgery & Medicine

Multimethod analysis of three rotary instruments produced by electric discharge machining technology

Emmanuel J. N. L. Silva et al.

Summary: This study aimed to compare three rotary instruments produced by the EDM process with the heat-treated ProTaper Gold system regarding design, metallurgy, mechanical properties and shaping ability. The results showed that HyFlex EDM, Neoniti, and EDMax rotary instruments had similar designs, metallurgy, and mechanical performances when compared with ProTaper Gold. However, there were no differences in their shaping ability.

INTERNATIONAL ENDODONTIC JOURNAL (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparative analysis of reciprocating and flat-side heat-treated rotary single-file systems: Design, metallurgical characteristics, and mechanical performance

Jorge N. R. Martins et al.

Summary: This study compared two flat-side single-file rotary instruments with three single-file reciprocating systems through a multimethod assessment. The results showed that the flat-side rotary instruments underperformed the reciprocating instruments in terms of cyclic fatigue, maximum torque, angle of rotation, maximum buckling strength, and flexibility. Manufacturing inconsistencies were also observed in some of the flat-side instruments.

INTERNATIONAL ENDODONTIC JOURNAL (2023)

Add to Collection

Article Chemistry, Physical

3D Surface Scanning-A Novel Protocol to Characterize Virtual Nickel-Titanium Endodontic Instruments

Jorge N. R. Martins et al.

Summary: This study validated and tested a 3D surface scanning method using a high-resolution optical scanner for creating reliable virtual models of NiTi instruments. The method was validated by comparing measurements with scanning electron microscopy and demonstrated high reproducibility. The 3D models created were accurate and suitable for commercial, educational, and in silico experiments.

MATERIALS (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Design, metallurgy, mechanical properties, and shaping ability of 3 heat-treated reciprocating systems: a multimethod investigation

Emmanuel J. N. L. Silva et al.

Summary: This study aimed to compare 3 reciprocating systems in terms of design, metallurgy, mechanical properties, and shaping ability. The results showed that although there were differences in design, temperature transition phases, and mechanical behavior parameters among the tested instruments, they were similar in terms of shaping ability.

CLINICAL ORAL INVESTIGATIONS (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparison of five rotary systems regarding design, metallurgy, mechanical performance, and canal preparation-a multimethod research

Jorge N. R. Martins et al.

Summary: The study compared 5 rotary systems in terms of design, material, mechanical performance, and canal preparation, revealing differences in instrument geometry, surface finishing, and phase transformation temperatures. However, consistent results were observed in the untouched root canal walls after preparation with the tested systems.

CLINICAL ORAL INVESTIGATIONS (2022)

Add to Collection

Article Chemistry, Physical

Design, Metallurgical Features, and Mechanical Behaviour of NiTi Endodontic Instruments from Five Different Heat-Treated Rotary Systems

Jorge N. R. Martins et al.

Summary: The current study compares the F1 endodontic instruments from five different heat-treated rotary systems in terms of their design, metallurgical properties, and mechanical performance. It is found that the instruments have similar nickel/titanium ratio and overall design, but differ in their performance. Super Files Blue shows the best durability, while Premium Taper Gold and Go-Taper Flex are more flexible.

MATERIALS (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

What Meaningful Information Are the Instruments Mechanical Testing Giving Us? A Comprehensive Review

Jorge N. R. Martins et al.

Summary: The mechanical strength and flexibility of instruments are traditionally evaluated through various tests, including cyclic fatigue, torsional, bending, buckling, and microhardness tests. Cyclic fatigue testing, in particular, can provide valuable information on the factors that may affect fatigue strength outcomes. Despite their importance, these tests are associated with limitations such as artificiality, simplicity, inconsistency, and low external validity. Efforts have been made to improve the reliability of the outcomes by incorporating settings that mimic clinical conditions.

JOURNAL OF ENDODONTICS (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparison of design, metallurgy, mechanical performance and shaping ability of replica-like and counterfeit instruments of the ProTaper Next system

J. N. R. Martins et al.

Summary: The study compared the ProTaper Next system with a replica-like and a counterfeit system in terms of design, metallurgy, mechanical performance, and shaping ability. The results showed similarities in nickel-titanium ratio and maximum torque to fracture among the systems, but differences in design, phase transformation temperatures, and mechanical behavior. The counterfeit instruments had lower cyclic fatigue resistance compared to the genuine system.

INTERNATIONAL ENDODONTIC JOURNAL (2021)

Add to Collection

Editorial Material Dentistry, Oral Surgery & Medicine

Dental materials science: Research, testing and standards

G. Schmalz et al.

DENTAL MATERIALS (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Design, metallurgical features, mechanical performance and canal preparation of six reciprocating instruments

J. N. R. Martins et al.

Summary: This study compared six reciprocating instruments in terms of their geometric design, metallurgical characteristics, mechanical behavior, and ability to prepare root canals. While the instruments had similarities in metal composition and unprepared canal area, they showed differences in phase transformation temperatures and geometric design. The study found that there were variations in the overall geometric design, phase transformation temperatures, and mechanical resistance parameters among the instruments.

INTERNATIONAL ENDODONTIC JOURNAL (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evaluation of Design, Metallurgy, Microhardness, and Mechanical Properties of Glide Path Instruments: A Multimethod Approach

Jorge N. R. Martins et al.

Summary: Differences in the design of the instruments and the phase transformation temperatures accounted for their mechanical behavior. The R-Pilot showed the highest torque, buckling, and microhardness, whereas the ProGlider instrument was the most flexible.

JOURNAL OF ENDODONTICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Need for Standardization: Influence of Artificial Canal Size on Cyclic Fatigue Tests of Endodontic Instruments

Sebastian Buerklein et al.

Summary: The study aimed to evaluate the influence of artificial canal size on cyclic fatigue tests of endodontic instruments. The results showed that fracture time significantly increased with larger artificial canal sizes, while the length of separated instruments continuously decreased.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Mechanical Tests, Metallurgical Characterization, and Shaping Ability of Nickel-Titanium Rotary Instruments: A Multimethod Research

Emmanuel J. N. L. Silva et al.

JOURNAL OF ENDODONTICS (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of the Preparation Order in Four-Canal Maxillary Molars with WaveOne Gold System

Carlla Sloane Alberton et al.

JOURNAL OF ENDODONTICS (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Mechanical Performance and Metallurgical Features of ProTaper Universal and 6 Replicalike Systems

Jorge N. R. Martins et al.

JOURNAL OF ENDODONTICS (2020)

Add to Collection

Editorial Material Dentistry, Oral Surgery & Medicine

Misuse of ISO standards in dental materials research

Brian W. Darvell

DENTAL MATERIALS (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic Fatigue Resistance of Rotary and Reciprocating Nickel-Titanium Instruments Subjected to Static and Dynamic Tests

Myint Thu et al.

JOURNAL OF ENDODONTICS (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Variable impact by ambient temperature on fatigue resistance of heat-treated nickel titanium instruments

Ana Arias et al.

CLINICAL ORAL INVESTIGATIONS (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of heat treatment on torsional resistance and surface roughness of nickel-titanium instruments

E. J. N. L. Silva et al.

INTERNATIONAL ENDODONTIC JOURNAL (2019)

Add to Collection

Editorial Material Dentistry, Oral Surgery & Medicine

Research that matters: studies on fatigue of rotary and reciprocating NiTi root canal instruments

Michael Huelsmann

INTERNATIONAL ENDODONTIC JOURNAL (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of static and dynamic cyclic fatigue tests on the lifespan of four reciprocating systems at different temperatures

A. Keles et al.

INTERNATIONAL ENDODONTIC JOURNAL (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Micro-CT assessment of the shaping ability of four root canal instrumentation systems in oval-shaped canals

M. L. Zuolo et al.

INTERNATIONAL ENDODONTIC JOURNAL (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic fatigue using severely curved canals and torsional resistance of thermally treated reciprocating instruments

Emmanuel Joao Nogueira Leal Silva et al.

CLINICAL ORAL INVESTIGATIONS (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evaluation of dynamic and static torsional resistances of nickel-titanium rotary instruments

Ibrahim H. Abu-Tahun et al.

JOURNAL OF DENTAL SCIENCES (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic Fatigue of Reciproc and Reciproc Blue Nickel-titanium Reciprocating Files at Different Environmental Temperatures

Gianluca Plotino et al.

JOURNAL OF ENDODONTICS (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic Fatigue Resistance of One Curve, 2Shape, ProFile Vortex, Vortex Blue, and RaCe Nickel-Titanium Rotary Instruments in Single and Double Curvature Canals

Amr M. Elnaghy et al.

JOURNAL OF ENDODONTICS (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of sodium hypochlorite and saline on cyclic fatigue resistance of WaveOne Gold and Reciproc reciprocating instruments

A. M. Elnaghy et al.

INTERNATIONAL ENDODONTIC JOURNAL (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

The Effects of Torsional Preloading on the Torsional Resistance of Nickel-titanium Instruments

Seung-Hei Oh et al.

JOURNAL OF ENDODONTICS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of Cyclic Flexural Deformation on the Torsional Resistance of Controlled Memory and Conventional Nickel-titanium Instruments

Eufemia Carolina Pelaez Acosta et al.

JOURNAL OF ENDODONTICS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect from Rotational Speed on Torsional Resistance of the Nickel-titanium Instruments

Jung-Hong Ha et al.

JOURNAL OF ENDODONTICS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Environmental Temperature Drastically Affects Flexural Fatigue Resistance of Nickel-titanium Rotary Files

Nicola Maria Grande et al.

JOURNAL OF ENDODONTICS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

The Effect of Temperature on Cyclic Fatigue of Nickel-titanium Rotary Endodontic Instruments

Amandeep Dosanjh et al.

JOURNAL OF ENDODONTICS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of Temperature on Cyclic Fatigue Resistance of ProTaper Gold and ProTaper Universal Rotary Files

Gianluca Plotino et al.

JOURNAL OF ENDODONTICS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Mechanical properties of ProTaper Gold nickel-titanium rotary instruments

A. M. Elnaghy et al.

INTERNATIONAL ENDODONTIC JOURNAL (2016)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evidence for Reduced Fatigue Resistance of Contemporary Rotary Instruments Exposed to Body Temperature

Rafaela Andrade de Vasconcelos et al.

JOURNAL OF ENDODONTICS (2016)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic Fatigue of ProFile Vortex and Vortex Blue Nickel-Titanium Files in Single and Double Curvatures

Frederic Duke et al.

JOURNAL OF ENDODONTICS (2015)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

In Vivo Intracanal Temperature Evolution during Endodontic Treatment after the Injection of Room Temperature or Preheated Sodium Hypochlorite

Ferdinand de Hemptinne et al.

JOURNAL OF ENDODONTICS (2015)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Bending Resistance and Dynamic and Static Cyclic Fatigue Life of Reciproc and WaveOne Large Instruments

Gustavo De-Deus et al.

JOURNAL OF ENDODONTICS (2014)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of Fatigue on Torsional Failure of Nickel-Titanium Controlled Memory Instruments

Les Campbell et al.

JOURNAL OF ENDODONTICS (2014)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of reciprocation usage of nickel-titanium rotary files on the cyclic fatigue resistance

WooCheol Lee et al.

AUSTRALIAN ENDODONTIC JOURNAL (2013)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Mechanical behavior of M-Wire and conventional NiTi wire used to manufacture rotary endodontic instruments

Erika S. J. Pereira et al.

DENTAL MATERIALS (2013)

Add to Collection

Editorial Material Dentistry, Oral Surgery & Medicine

Research that matters canal preparation, retreatment and working length studies

M. Huelsmann

INTERNATIONAL ENDODONTIC JOURNAL (2013)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Fatigue Life of Reciproc and Mtwo Instruments Subjected to Static and Dynamic Tests

Helio P. Lopes et al.

JOURNAL OF ENDODONTICS (2013)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Evaluation of the Impact of Raw Materials on the Fatigue and Mechanical Properties of ProFile Vortex Rotary Instruments

Yong Gao et al.

JOURNAL OF ENDODONTICS (2012)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Heat treatment of nickel-titanium rotary endodontic instruments: effects on bending properties and shaping abilities

A. Ebihara et al.

INTERNATIONAL ENDODONTIC JOURNAL (2011)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Influence of Different Manufacturing Methods on the Cyclic Fatigue of Rotary Nickel-Titanium Endodontic Instruments

Renata C. V. Rodrigues et al.

JOURNAL OF ENDODONTICS (2011)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparison of Autoclaving Effects on Torsional Deformation and Fracture Resistance of Three Innovative Endodontic File Systems

Rhett B. Casper et al.

JOURNAL OF ENDODONTICS (2011)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement

G. De-Deus et al.

INTERNATIONAL ENDODONTIC JOURNAL (2010)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Dynamic Torsional Resistance of Nickel-Titanium Rotary Instruments

Su-Young Park et al.

JOURNAL OF ENDODONTICS (2010)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Relationship between flexibility and physical, chemical, and geometric characteristics of rotary nickel-titanium instruments

Ana Cecilia Diniz Viana et al.

ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2010)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Torsional behaviour of rotary NiTi ProTaper Universal instruments after multiple clinical use

E. P. Vieira et al.

INTERNATIONAL ENDODONTIC JOURNAL (2009)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic Fatigue Analysis of a New Generation of Nickel Titanium Rotary Instruments

C. Michael Larsen et al.

JOURNAL OF ENDODONTICS (2009)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of electropolishing ProFile nickel-titanium rotary instruments on cyclic fatigue resistance, torsional resistance, and cutting efficiency

Tung B. Bui et al.

JOURNAL OF ENDODONTICS (2008)

Add to Collection

Article Thermodynamics

Measurement of the thermal conductivity and heat capacity of freestanding shape memory thin films using the 3 omega method

Ankur Jain et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Fracture resistance of electropolished rotary nickel-titanium endodontic instruments

Margot E. Anderson et al.

JOURNAL OF ENDODONTICS (2007)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Fatigue testing of a NiTi rotary instrument. Part 1: Strain-life relationship

G. S. P. Cheung et al.

INTERNATIONAL ENDODONTIC JOURNAL (2007)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of clinical use on the cyclic fatigue resistance of ProTaper nickel-titanium rotary instruments

Hani F. Ounsi et al.

JOURNAL OF ENDODONTICS (2007)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic fatigue resistance and three-dimensional analysis of instruments from two nickel-titanium rotary systems

N. M. Grande et al.

INTERNATIONAL ENDODONTIC JOURNAL (2006)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cyclic fatigue of endodontic nickel titanium rotary instruments: Static and dynamic tests

UM Li et al.

JOURNAL OF ENDODONTICS (2002)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Defects in rotary nickel-titanium files after clinical use

B Sattapan et al.

JOURNAL OF ENDODONTICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.