☆ 4.7 Article

Hole-Transport Material Engineering in Highly Durable Carbon-Based Perovskite Photovoltaic Devices

NANOMATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

TiO2 and C60 transport nanolayers in optimized Pb-free CH3NH3SnI3-based perovskite solar cells

Masood Mehrabian et al.

Summary: A Pb-free perovskite solar cell based on methylammonium tin-iodide was designed, and the effect of electron transporting layer material on the cell performance was studied. The TiO2-containing cell showed the highest power conversion efficiency, while the C60-containing cell exhibited higher external quantum efficiency at NIR wavelength region.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2023)

Add to Collection

Article Optics

Perovskite solar cells based on spiro-OMeTAD stabilized with an alkylthiol additive

Xu Liu et al.

Summary: This study presents a facile approach for doping spiro-OMeTAD hole-transport materials using a low-cost alkylthiol additive DDT. The incorporation of DDT allows for a more efficient and controllable doping process with reduced duration. Coordination between DDT and LiTFSI increases the dopant concentration, enhances the structural integrity of the material, and improves device performance under wetting, heat, and light stress.

NATURE PHOTONICS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Light-Induced Transient Lattice Dynamics and Metastable Phase Transition in CH3NH3PbI3 Nanocrystals

Ariel A. Leonard et al.

Summary: By using variable temperature X-ray diffraction and synchrotron-based transient X-ray diffraction, the lattice response of methylammonium lead iodide (MAPbI3) perovskite nanocrystals following ultrafast optical excitation was investigated. The MAPbI3 nanocrystals were found to undergo a slow phase transition from tetragonal to a pseudocubic phase under photoexcitation, with nonthermal lattice distortions attributed to polaron formation. The lattice recovery exceeded expected time scales for carrier recombination and thermal dissipation, indicating meta-stability likely due to the proximal phase transition. These findings are relevant for both fundamental understanding and applications of structure-function properties.

ACS NANO (2023)

Add to Collection

Article Engineering, Environmental

Dual-side interfacial passivation of FAPbI3 perovskite film by Naphthylmethylammonium iodide for highly efficient and stable perovskite solar cells

Mohammad Hatamvand et al.

Summary: Passivating the interfaces of perovskite solar cells with NMAI salt can effectively reduce non-radiative recombination, extend carrier recombination lifetime, and improve device performance.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Multidisciplinary Sciences

Controlled growth of perovskite layers with volatile alkylammonium chlorides

Jaewang Park et al.

Summary: Controlling the crystallinity and surface morphology of perovskite layers is crucial for achieving high-efficiency perovskite solar cells. By adding alkylammonium chlorides (RACl) to a-formamidinium lead iodide (FAPbI(3)), the crystallization process and surface morphology of the perovskite thin films can be controlled. The resulting perovskite thin layers facilitate the fabrication of perovskite solar cells with a high power-conversion efficiency of 26.08%.

NATURE (2023)

Add to Collection

Article Chemistry, Physical

High-efficiency (>20%) planar carbon-based perovskite solar cells through device configuration engineering

Huiyin Zhang et al.

Summary: High-performance planar C-PSCs were fabricated through device configuration engineering, improving the crystallization and absorption profiles of the perovskite active layer and enhancing carrier generation. Comprehensive evaluation of the physical and mechanical properties of the carbon electrode regulated the back interface contact. The prepared devices achieved a remarkable PCE of up to 20.04% and demonstrated excellent long-term stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Physics, Applied

Defect tolerance in halide perovskites: A first-principles perspective

Xie Zhang et al.

Summary: This Perspective critically discusses the defect tolerance in halide perovskites based on first-principles calculations. It shows that halide perovskites are not defect tolerant and suffer from defect-assisted nonradiative recombination, with comparable or higher nonradiative recombination rates than conventional semiconductors. The importance of accurate defect properties and defect engineering in improving the efficiency of perovskite solar cells is highlighted.

JOURNAL OF APPLIED PHYSICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Local nanoscale phase impurities are degradation sites in halide perovskites

Stuart Macpherson et al.

Summary: Understanding the nanoscopic chemical and structural changes is crucial for mitigating device degradation in emerging energy materials. Researchers have developed a multimodal microscopy toolkit to investigate the impact of phase impurities on the performance and longevity of formamidinium-rich perovskite absorbers. The study also demonstrates that manipulating these impurities can alleviate performance losses and intrinsic degradation processes.

NATURE (2022)

Add to Collection

Review Energy & Fuels

PTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review

Yihao Wang et al.

Summary: PTAA has emerged as a promising candidate for hole transport layer (HTL) in perovskite solar cells (PSCs), with its advantages of ease of fabrication, transparency, flexibility, conductivity, and stability. Research efforts have focused on exploring the potential and addressing the challenges of utilizing PTAA in PSC applications. Exciting and promising research directions for PTAA-based PSCs are being discussed to shed light on practical applications.

SOLAR RRL (2022)

Add to Collection

Article Multidisciplinary Sciences

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Siraj Sidhik et al.

Summary: Realizing solution-processed heterostructures in halide perovskites is a long-standing challenge due to solvent incompatibilities. However, by utilizing the solvent dielectric constant and Gutmann donor number, it is possible to grow phase-pure two-dimensional (2D) halide perovskite stacks with desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. The thickness dependence of the 2D perovskite layer shows expected trends for different device architectures, indicating the influence of band alignment and carrier transport limits.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Recent Progress in Ionic Liquids for Stability Engineering of Perovskite Solar Cells

Fei Wang et al.

Summary: Perovskite solar cells have attracted attention for their high efficiency, absorption coefficients, tunability, and manufacturing protocols. However, long-term stability remains a challenge. Ionic liquids have been used to improve stability and performance through film evolution and modifications of photophysical properties. This review discusses the reasons for instability, strategies for stability improvement, and challenges and prospects of perovskite solar cells.

SMALL STRUCTURES (2022)

Add to Collection

Article Multidisciplinary Sciences

Ultrafast and stable planar photodetector based on SnS2 nanosheets/perovskite structure

Leyla Shooshtari et al.

Summary: In this study, SnS2 vertical nanosheets have been successfully fabricated on FTO substrate through CVD method at relatively low temperature. By aligning SnS2 with triple cation lead perovskite, an improved photodetector with high performance has been achieved, exhibiting fast response, high photoresponsivity, external quantum efficiency, and detectivity under stable conditions. The demonstrated growth and fabrication process of planar photodetectors show potential for large-scale, cost-effective, and high-performance optoelectronic devices.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

All-Carbon Negative Differential Resistance Nanodevice Using a Single Flake of Nanoporous Graphene

Reza Rahighi et al.

Summary: The study involved the preparation and investigation of a temperature-induced degenerate p-type graphene nanopore/reduced graphene oxide (GNP/rGO) heterojunction-based nanodevice, exhibiting a robust negative differential resistance (NDR) feature. Cellulose-based perforated graphene foams (PGFs) containing numerous nanopores and showing essential p-type semiconducting characteristics were synthesized, with an observed stable and reversible NDR peak at high temperatures. The involvement of O-2 gas in the ambient environment in water-based degeneration of the initial p-type regions around the GNPs led to the appearance of an intensive quantum tunneling NDR peak.

ACS APPLIED ELECTRONIC MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells

Florine M. Rombach et al.

Summary: Organic semiconductors are crucial in thin-film electronic devices, especially as hole transport layers (HTLs) in perovskite solar cells (PSCs). Spiro-OMeTAD and PTAA have been the leading materials for high efficiency HTLs, with research on their properties contributing to a better understanding of their success mechanisms. This review provides key insights into the electronic and morphological properties, doping strategies, and degradation pathways of spiro-OMeTAD and PTAA, guiding the development of future HTL materials with improved stability and efficiency for PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Temperature-Dependent Ambipolar Charge Carrier Mobility in Large-Crystal Hybrid Halide Perovskite Thin Films

Alexander Biewald et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient and Stable Perovskite Solar Cell Achieved with Bifunctional Interfacial Layers

Fuhua Hou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Compositional Engineering for Thermally Stable, Highly Efficient Perovskite Solar Cells Exceeding 20% Power Conversion Efficiency with 85 °C/85% 1000 h Stability

Taisuke Matsui et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering

Qian-Qian Chu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Efficient and stable carbon-based perovskite solar cells enabled by the inorganic interface of CuSCN and carbon nanotubes

Xin Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Long-Range Charge Extraction in Back-Contact Perovskite Architectures via Suppressed Recombination

Gregory D. Tainter et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Heterojunction Engineering for High Efficiency Cesium Formamidinium Double-Cation Lead Halide Perovskite Solar Cells

Yihui Wu et al.

CHEMSUSCHEM (2018)

Add to Collection

Article Chemistry, Physical

Light-induced reactivity of gold and hybrid perovskite as a new possible degradation mechanism in perovskite solar cells

Natalia N. Shlenskaya et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

Add to Collection

Review Chemistry, Physical

A full overview of international standards assessing the long-term stability of perovskite solar cells

Philippe Holzhey et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Perovskite/Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] Bulk Heterojunction for High-Efficient Carbon-Based Large-Area Solar Cells by Gradient Engineering

Jianhua Han et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Electrochemistry

Effects of Sintering Temperature and Press Pressure on the Microstructure and Electrochemical Behaviour of the Ag2O/GO Nanocomposite

H. Pourfarzad et al.

RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Gold and iodine diffusion in large area perovskite solar cells under illumination

S. Cacovich et al.

NANOSCALE (2017)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Evaluation of dosimetric characteristics of graphene oxide/PVC nanocomposite for gamma radiation applications

Shahzad Feizi et al.

RADIOCHIMICA ACTA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid Perovskite Phase Transition and Its Ionic, Electrical and Optical Properties

Md Nadim Ferdous Hoque et al.

MRS ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Globularity-Selected Large Molecules for a New Generation of Multication Perovskites

Somayeh Gholipour et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells

Konrad Domanski et al.

ACS NANO (2016)

Add to Collection

Article Engineering, Environmental

Single-step scalable synthesis of three-dimensional highly porous graphene with favorable methane adsorption

Leila Mahmoudian et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Determination of the exciton binding energy and effective masses for methylammonium and formamidinium lead tri-halide perovskite semiconductors

Krzysztof Galkowski et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Michael Saliba et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Highly Efficient and Stable Perovskite Solar Cells based on a Low-Cost Carbon Cloth

Somayeh Gholipour et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells

Chu-Chen Chueh et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Energy & Fuels

Outdoor Performance and Stability under Elevated Temperatures and Long-Term Light Soaking of Triple-Layer Mesoporous Perovskite Photovoltaics

Xiong Li et al.

ENERGY TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3

Jin-Wook Lee et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Mixed-Organic-Cation Perovskite Photovoltaics for Enhanced Solar-Light Harvesting

Norman Pellet et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A dopant-free hole-transporting material for efficient and stable perovskite solar cells

Jian Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

CH3NH3SnxPb(1-x)I3 Perovskite Solar Cells Covering up to 1060 nm

Yuhei Ogomi et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Organometallic Halide Perovskites: Sharp Optical Absorption Edge and Its Relation to Photovoltaic Performance

Stefaan De Wolf et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells

Jarvist M. Frost et al.

NANO LETTERS (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties

Constantinos C. Stoumpos et al.

INORGANIC CHEMISTRY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical Management for Colorful, Efficient, and Stable Inorganic-Organic Hybrid Nanostructured Solar Cells

Jun Hong Noh et al.

NANO LETTERS (2013)

Add to Collection

Article Chemistry, Physical

Photocatalytic Reduction of Graphene Oxide Nanosheets on TiO2 Thin Film for Photoinactivation of Bacteria in Solar Light Irradiation

O. Akhavan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.