☆ 4.7 Article

High-Performance Perovskite Solar Cells and Modules Fabricated by Slot-Die Coating with Nontoxic Solvents

NANOMATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Novel one-dimensional V3S4@NC nanofibers for sodium-ion batteries

Zan Huang et al.

Summary: In this study, a facile electrospinning method was used to fabricate novel one-dimensional V3S4@NC nanofibers as anodes for sodium-ion batteries. The composite consists of monoclinic-structured V3S4 nano-crystals uniformly embedded in one-dimensional carbon fibers with high electrical conductivity. Electrochemical tests showed that the V3S4@NC anode exhibited excellent rate capability and cyclic life due to its superior electron transfer conductivity. It demonstrated high reversible capacities of 455, 343, 307, and 249 mAh g-1 at 0.1, 1, 2, and 5 A g-1, respectively, and retained 96.5% capacity at 10 A g-1 after 300 cycles. This promising strategy provides a new direction for high-performance V3S4 anodes in sodium-ion storage.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing the photovoltaic performance of planar heterojunction perovskite solar cells via introducing binary-mixed organic electron transport layers

Shiqi Wang et al.

Summary: Optimizing electron transport layers (ETLs) by using binary-mixed organic ETLs is an effective way to enhance the performance and stability of inverted perovskite solar cells (PSCs). In this study, a binary-mixed organic ETLs is fabricated by doping an n-type organic molecule, m-ITTC, into PCBM ETLs. The modified PSCs show a PCE of 15.62% with negligible hysteresis and improved stability.

NEW JOURNAL OF CHEMISTRY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Alkali Additives Enable Efficient Large Area (>55 cm2) Slot-Die Coated Perovskite Solar Modules

Prem Jyoti Singh Rana et al.

Summary: A seed-assisted crystallization approach using alkali salts has been demonstrated to enable the fabrication of large-area and highly crystalline perovskite films. The slot-die coated perovskite films show improved optoelectronic properties and stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Energy & Fuels

All-Slot-Die-Coated Inverted Perovskite Solar Cells in Ambient Conditions with Chlorine Additives

Thai Son Le et al.

Summary: This study demonstrates the successful application of slot-die coating for large-scale production of perovskite solar cells, achieving high power conversion efficiency. The use of Cl-containing additives and vacuum quenching is essential for reproducible crystallization of perovskite films, leading to improved performance of the devices. Additionally, the methodology is successfully upscaled for minimodule fabrication, showing great potential for sheet-to-sheet production of perovskite solar cells.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Physical

Mixed Solvent Engineering for Morphology Optimization of the Electron Transport Layer in Perovskite Photovoltaics

SungWon Cho et al.

Summary: Morphology optimization of the electron transport layer (ETL) in perovskite solar cells (PSCs) through solvent engineering using a mixed solvent system has been shown to improve device efficiency by enhancing the interaction at the perovskite/ETL interface, leading to efficient charge transfer and reduced carrier recombination. The power conversion efficiency (PCE) in PSCs has been increased from 17.2% to 18.46% with the introduction of a mixed solvent system for ETL, demonstrating the potential of this approach for high-performance PSCs.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Manipulating Crystallization Kinetics in High-Performance Blade-Coated Perovskite Solar Cells via Cosolvent-Assisted Phase Transition

Qiong Liang et al.

Summary: By incorporating ethyl alcohol (EtOH) into perovskite ink, a facile and effective strategy for fabricating high-performance room-temperature blade-coated perovskite solar cells and modules is demonstrated in this work. Real-time perovskite crystallization studies reveal the structural evolutions and phase-transition pathway. The strategy efficiently suppresses nonradiative recombination and improves device efficiency and stability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Performance improvement of slot-die-deposition based perovskite solar cells using diglycolic acid additives

Hyun-Jung Lee et al.

Summary: In this study, we aimed to improve the formation of perovskite films by slot-die-coating process. By introducing diglycolic acid (DA) as an additive in the perovskite precursor solution, we successfully enhanced the device efficiency and stability of the perovskite-based devices.

MATERIALS LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Surface Passivation and Energetic Modification Suppress Nonradiative Recombination in Perovskite Solar Cells

Wei Dong et al.

Summary: Surface passivation via post-treatment is an important strategy for improving power conversion efficiency and operational stability of perovskite solar cells. In this study, the atomic-scale interaction between the surface passivating additive 2FEABr and MAPbI(3) is investigated. It is found that the bulky 2FEA(+) cations distribute at the film surface, while the Br- anions diffuse into the bulk. The solid-state NMR and spectroscopy analysis reveal that the Br- anions partially substitute for the I- sites, restrict the motion of partial MA(+) cations, and firm the perovskite lattices, leading to improved charge transport and stability.

NANO-MICRO LETTERS (2022)

Add to Collection

Review Chemistry, Physical

Ink Engineering in Blade-Coating Large-Area Perovskite Solar Cells

Jinxin Yang et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) show great potential in industrial commercialization, but efficiency and stability decrease when scaling up the device area. Blade-coating methods have been developed to fabricate large-area PSCs with uniform perovskite films. Ink engineering plays an important role in blade-coating, especially for crystallinity and defect control. This review summarizes the blade-coating method for large-area perovskite films, perovskite ink engineering, and recent advances in functional layer ink engineering and hole transporting material-free carbon-based PSCs.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Stability and degradation in triple cation and methyl ammonium lead iodide perovskite solar cells mediated via Au and Ag electrodes

Kakaraparthi Kranthiraja et al.

Summary: Perovskite solar cells (PSCs) based on methyl ammonium lead iodide (MAPbI(3)) have shown high power conversion efficiencies (PCEs), but their long-term stability remains a challenge. This study analyzes the impact of different electrode collector layers on the degradation mechanism of the perovskite absorber, and finds that PSCs with Au electrodes outperform those with Ag electrodes in terms of PCE and operational stability. Photoluminescence spectroscopy reveals the interaction between Ag and the absorber, leading to degradation, while Au does not suppress the emission spectrum. These findings are important for the design of new electrode materials and the commercialization of PSCs.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High-Performance Visible to Near-Infrared Broadband Bi2O2Se Nanoribbon Photodetectors

Yuchao Wei et al.

Summary: This study successfully synthesized a Bi2O2Se nanoribbon and achieved a fast response and low noise photodetector by applying a Schottky barrier between the Bi2O2Se and Au electrodes. The device has low dark current and fast response time, providing new opportunities for high-performance VIS-NIR photodetectors.

ADVANCED OPTICAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Graded interface engineering of 3D/2D halide perovskite solar cells through ultrathin (PEA)2PbI4 nanosheets

Lijie Zhu et al.

Summary: This study reports a rationally designed PSCs with dimensional graded 3D/2D MAPbI(3)/(PEA)(2)PbI4 heterojunction, achieved by synthesizing 2D (PEA)(2)PbI4 NSs and incorporating them between 3D MAPbI(3) and the transport layer. The heterojunction significantly improved stability and power conversion efficiency, while the graded structure upshifts the energy level continuously to enhance hole extraction efficiency.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection

Article Chemistry, Physical

20.8% Slot-Die Coated MAPbI3 Perovskite Solar Cells by Optimal DMSO-Content and Age of 2-ME Based Precursor Inks

Jinzhao Li et al.

Summary: Efficiency records for solution-processed solar cell devices incorporating metal-halide perovskite semiconductors continue to be broken, with the need for scalable process technology and optimized ink formulations highlighted for large-area prototypes. The study demonstrates the importance of rational insights into ink composition and process control for reproducible manufacturing of MHP-based devices. The addition of a limited amount of DMSO prevents the formation of an intermediate crystalline phase and promotes the formation of the desired perovskite phase, while excess DMSO content negatively impacts thin-film morphology.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

SnO2/2D-Bi2O2Se new hybrid electron transporting layer for efficient and stable perovskite solar cells

Jinyun Chen et al.

Summary: Interfacial engineering using 2D Bi2O2Se nano-flakes as ETL improved the performance of PSCs by reducing charge recombination at interfaces. The newly developed SnO2/2D Bi2O2Se hybrid ETL enhanced electron transport efficiency and promoted larger perovskite crystal formation, leading to increased PCE and improved stability of PSCs. This study demonstrates the potential application of 2D Bi2O2Se material in PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Applied

Large-area perovskite films for PV applications: A perspective from nucleation and crystallization

Yuanhang Yang et al.

Summary: Perovskite solar cells have seen significant improvements in efficiency, but there is still a gap between laboratory and industrial-scale production. Efficiency losses are mainly attributed to the quality and crystallization processes of large-area films, emphasizing the importance of crystallization control in scaling up production.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Polymer Science

Unraveling the Stable Phase, High Absorption Coefficient, Optical and Mechanical Properties of Hybrid Perovskite CH3NH3PbxMg1-xI3: Density Functional Approach

R. O. Agbaoye et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fully slot-die-coated perovskite solar cells in ambient condition

Luoyi Gao et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)

Add to Collection

Article Multidisciplinary Sciences

Fully Spray-Coated Triple-Cation Perovskite Solar Cells

James E. Bishop et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Work-Function-Tunable Electron Transport Layer of Molecule-Capped Metal Oxide for a High-Efficiency and Stable p-i-n Perovskite Solar Cell

Pei-Huan Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Toward All Slot-Die Fabricated High Efficiency Large Area Perovskite Solar Cell Using Rapid Near Infrared Heating in Ambient Air

Shih-Han Huang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Rapid and sheet-to-sheet slot-die coating manufacture of highly efficient perovskite solar cells processed under ambient air

Yu-Ching Huang et al.

SOLAR ENERGY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Toward Perovskite Solar Cell Commercialization: A Perspective and Research Roadmap Based on Interfacial Engineering

Adharsh Rajagopal et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

High throughput two-step ultrasonic spray deposited CH3NH3PbI3 thin film layer for solar cell application

Ding-Hung Lan et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage

Meng Wang et al.

NATURE CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Roll-to-Roll Slot Die Coated Perovskite for Efficient Flexible Solar Cells

Yulia Galagan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Ion Migration-Induced Electrode Degradation on the Operational Stability of Perovskite Solar Cells

Boris Rivkin et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films

Nakita K. Noel et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Energy & Fuels

Highly Efficient Perovskite Solar Cells Using Non-Toxic Industry Compatible Solvent System

Junke Wang et al.

SOLAR RRL (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells

Jin-Wook Lee et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

Add to Collection

Article Chemistry, Physical

Nonhazardous Solvent Systems for Processing Perovskite Photovoltaics

Kira L. Gardner et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

A Novel Aluminum-Graphite Dual-Ion Battery

Xiaolong Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Efficiency Enhancement of Inverted Structure Perovskite Solar Cells via Oleamide Doping of PCBM Electron Transport Layer

Fei Xia et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Light Harvesting and Charge Recombination in CH3NH3PbI3 Perovskite Solar Cells Studied by Hole Transport Layer Thickness Variation

Nevena Marinova et al.

ACS NANO (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide

Namyoung Ahn et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Physics, Multidisciplinary

Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites

Atsuhiko Miyata et al.

NATURE PHYSICS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Efficiencies of perovskite hybrid solar cells influenced by film thickness and morphology of CH3NH3PbI3-xClx layer

Kai Wang et al.

ORGANIC ELECTRONICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A promising alternative solvent of perovskite to induce rapid crystallization for high-efficiency photovoltaic devices

Minghang Lv et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

Zhanhua Wei et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Benefits of very thin PCBM and LiF layers for solution-processed p-i-n perovskite solar cells

Jangwon Seo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition

Yongzhen Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Improved Understanding of the Electronic and Energetic Landscapes of Perovskite Solar Cells: High Local Charge Carrier Mobility, Reduced Recombination, and Extremely Shallow Traps

Hikaru Oga et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells

Henry J. Snaith

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Expanding GSK's solvent selection guide - embedding sustainability into solvent selection starting at medicinal chemistry

Richard K. Henderson et al.

GREEN CHEMISTRY (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.