☆ 4.5 Article

Influence of Flow-Gas Composition on Reaction Products of Thermally Treated NMC Battery Black Mass

METALS (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Roadmap for a sustainable circular economy in lithium-ion and future battery technologies

Gavin D. J. Harper et al.

Summary: This roadmap presents the market dynamics and their influence on a future circular economy for lithium-ion batteries (LIB), with a focus on safety throughout the life cycle. Various options for end-of-life (EOL) disposal, such as remanufacturing, reuse, and recycling, are discussed. Diagnostics play a crucial role in assessing battery health and condition, and improvements to diagnostic techniques are evaluated. The future of LIB recycling lies in automated dismantling of EOL battery packs and the development of design for recycling and new cell design approaches.

JOURNAL OF PHYSICS-ENERGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Vacuum Pyrolysis of Pine Sawdust to Recover Spent Lithium Ion Batteries: The Synergistic Effect of Carbothermic Reduction and Pyrolysis Gas Reduction

Fengyin Zhou et al.

Summary: This study presents a strategy for recycling lithium and cobalt from spent lithium ion batteries using a biomass carbothermic reduction approach. The efficient recovery of lithium and cobalt was achieved by using pine sawdust as the reducing agent. Economic and environmental analysis revealed the feasibility and sustainability of this method.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Carbothermic reduction of spent Lithium-Ion batteries using CO2 as reaction medium

Sanghyuk Park et al.

Summary: It is important to develop a sustainable recycling strategy for spent lithium-ion batteries (LIBs) due to the rapid growth of the electric vehicle (EV) market. This study focused on a carbothermic reduction (CTR) process using CO2 as the reaction medium to recover metal(oxide)s from spent LIBs. The study found that the CO2 environment in the CTR process influences the reduction behaviors of cathode materials in LIBs, leading to enhanced metal recovery. The findings suggest that the CO2-assisted CTR process offers an environmentally favorable platform for metal recovery from spent LIBs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Environmentally Friendly Recovery of Lithium from Lithium-Sulfur Batteries

Lilian Schwich et al.

Summary: Due to the increasing demand for electric storage systems, lithium-sulfur batteries have become an attractive solution for low-weight and high-energy battery systems. In order to ensure the raw material requirements for future generations and promote circular economy, metallurgical recycling processes are necessary. This study presents an environmentally friendly and safe process for lithium recovery, combining thermal and hydrometallurgical methods.

METALS (2022)

Add to Collection

Article Chemistry, Physical

Recovery of Co, Ni, Mn, and Li from Li-ion batteries by smelting reduction Part I: A laboratory-scale study

Xianfeng Hu et al.

Summary: This study explores the recovery of valuable elements from lithium-ion batteries through smelting reduction processes, with a focus on recovering Co, Ni, Mn, and lithium simultaneously. The results show that with the addition of halides like CaF2 and CaCl2, nearly 100% recovery of metals and lithium can be achieved.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

A contribution to understanding the flotation behavior of lithium metal oxides and spheroidized graphite for lithium-ion battery recycling

Anna Vanderbruggen et al.

Summary: This study explores the challenges and issues in using froth flotation to treat end-of-life lithium-ion batteries, particularly focusing on the flotation mechanisms of cathode active particles. It reveals that contrary to common belief, lithium metal oxides can attach to air bubbles and exhibit varying contact angles, impacting the recovery process. The interaction with oil-based collectors and particle agglomeration also play a role in the separation and recovery of valuable materials.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Engineering, Environmental

Comparison of the effects of incineration, vacuum pyrolysis and dynamic pyrolysis on the composition of NMC-lithium battery cathode-material production scraps and separation of the current collector

Gabriele Lombardo et al.

Summary: The increasing demand for lithium batteries poses a challenge for battery producers in handling production scrap and recycling cathode materials. Different thermal treatments such as incineration, dynamic pyrolysis, and pyrolysis under vacuum have varying effects on the microstructure and composition of scrap cathode material. The study found that under pyrolysis conditions, organic components in the cathodes triggered carbothermic reduction of active material, resulting in the formation of new compounds. The most effective technique for recovering cathode material is incineration at a temperature above 550 degrees C but below 650 degrees C for at least 90 minutes, yielding over 95% of recovered active material.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Energy & Fuels

Facile Dry Coating Method of High-Nickel Cathode Material by Nanostructured Fumed Alumina (Al2O3) Improving the Performance of Lithium-Ion Batteries

Marcel J. Herzog et al.

Summary: The dry powder coating process with nanostructured fumed metal oxides for high-Ni cathode active materials can significantly improve the capacity retention, cycle life, and rate performance, reducing the formation of solid electrolyte interface (SEI) and charge transfer impedance during cycling. The stable coating layer formed during cycling also enhances lithium ion diffusivity and performance.

ENERGY TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Early-Stage Recovery of Lithium from Tailored Thermal Conditioned Black Mass Part I: Mobilizing Lithium via Supercritical CO2-Carbonation

Lilian Schwich et al.

Summary: In the global context of lithium-ion battery recycling, the emphasis on circular economy is crucial, with a focus on lithium recovery. The study investigates the early-stage lithium recovery method and examines factors that influence the lithium yield, such as purification, separation methods, temperature, and carbonation treatments. By utilizing supercritical CO2 in an autoclave reactor, lithium yields of up to 79% can be achieved, showcasing a promising approach for sustainable lithium recovery.

METALS (2021)

Add to Collection

Article Engineering, Chemical

Pyrometallurgical Lithium-Ion-Battery Recycling: Approach to Limiting Lithium Slagging with the InduRed Reactor Concept

Stefan Windisch-Kern et al.

Summary: The complexity of spent lithium-ion batteries waste poses challenges on recycling industry. Pyrometallurgical processes are beneficial but unable to recover lithium from black matter, whereas the InduRed reactor concept shows promise in achieving high recovery potentials for nickel, cobalt, and manganese at temperatures of 800°C to 1000°C, while preventing lithium slagging.

PROCESSES (2021)

Add to Collection

Article Engineering, Environmental

Hydrometallurgical recycling of EV lithium-ion batteries: Effects of incineration on the leaching efficiency of metals using sulfuric acid

Nathalia Vieceli et al.

Summary: The incineration process is an effective method for recycling metals from spent batteries, achieving leaching efficiencies of over 70%. Increasing the incineration temperature reduces graphite signal intensity and oxidative conditions, while lower incineration temperatures and longer leaching times contribute to partial carbothermic reduction of metals.

WASTE MANAGEMENT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative Study for Selective Lithium Recovery via Chemical Transformations during Incineration and Dynamic Pyrolysis of EV Li-Ion Batteries

Srija Balachandran et al.

Summary: Selective leaching of Li from spent LIBs was examined after thermal pretreatment by pyrolysis and incineration at 400-700°C for 30, 60, and 90 min, followed by water leaching with high temperature and high L/S ratio. Along with Li salts, AlF3 was also leached with an efficiency not higher than 3.5%. Thermal pretreatment time did not significantly affect Li leaching efficiency, but a higher L/S ratio led to higher leaching efficiency.

METALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Enabling the thermal stability of solid electrolyte interphase in Li-ion battery

Chenxi Zu et al.

Summary: The thermal safety of lithium-ion batteries is crucial for various applications, and thermal runaway can lead to hazardous incidents and battery pack failures. To enhance the thermal stability of battery systems, building a thermally stable solid/cathode electrolyte interface and incorporating functional components such as stable lithium salts and high boiling point solvents are key measures. In addition, techniques like in-situ polymerization/solidification can enhance the overall stability of the battery system.

INFOMAT (2021)

Add to Collection

Article Engineering, Environmental

Incineration of EV Lithium-ion batteries as a pretreatment for recycling - Determination of the potential formation of hazardous by-products and effects on metal compounds

Gabriele Lombardo et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Electrochemistry

Li2CO3 decomposition in Li-ion batteries induced by the electrochemical oxidation of the electrolyte and of electrolyte impurities

Anna T. S. Freiberg et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A Combined Pyro- and Hydrometallurgical Approach to Recycle Pyrolyzed Lithium-Ion Battery Black Mass Part 1: Production of Lithium Concentrates in an Electric Arc Furnace

Marcus Sommerfeld et al.

METALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Industrial Recycling of Lithium-Ion Batteries-A Critical Review of Metallurgical Process Routes

Lisa Brueckner et al.

METALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Future material demand for automotive lithium-based batteries

Chengjian Xu et al.

COMMUNICATIONS MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Development of a Two-Stage Pyrolysis Process for the End-Of-Life Nickel Cobalt Manganese Lithium Battery Recycling from Electric Vehicles

Lingyun Zhu et al.

SUSTAINABILITY (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Recycling of End-of-Life Lithium-Ion Batteries, Part II: Laboratory-Scale Research Developments in Mechanical, Thermal, and Leaching Treatments

Haruka Pinegar et al.

JOURNAL OF SUSTAINABLE METALLURGY (2020)

Add to Collection

Article Engineering, Environmental

Gas generation measurement and evaluation during mechanical processing and thermal treatment of spent Li-ion batteries

Fabian Diaz et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Green & Sustainable Science & Technology

A Sustainable Process for the Recovery of Anode and Cathode Materials Derived from Spent Lithium-Ion Batteries

Guangwen Zhang et al.

SUSTAINABILITY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

The Aluminum-Ion Battery: A Sustainable and Seminal Concept?

Tilmann Leisegang et al.

FRONTIERS IN CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical Transformations in Li-Ion Battery Electrode Materials by Carbothermic Reduction

Gabriele Lombardo et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Toxicity Identification and Evolution Mechanism of Thermolysis-Driven Gas Emissions from Cathodes of Spent Lithium-Ion Batteries

Yongming Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Study on the reduction roasting of spent LiNixCoyMnzO2 lithium-ion battery cathode materials

Pengcheng Liu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of Cobalt and Lithium Values from Discarded Li-Ion Batteries

Shubham Vishvakarma et al.

JOURNAL OF SUSTAINABLE METALLURGY (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Comparative Analysis About Degradation Mechanisms of Printed Circuit Boards (PCBs) in Slow and Fast Pyrolysis: The Influence of Heating Speed

Fabian Diaz et al.

JOURNAL OF SUSTAINABLE METALLURGY (2018)

Add to Collection

Article Engineering, Environmental

Recycling metals from lithium ion battery by mechanical separation and vacuum metallurgy

Jiefeng Xiao et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

A promising approach for the recovery of high value-added metals from spent lithium-ion batteries

Juntao Hu et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of Valuable Metals from Spent Lithium-Ion Batteries by Smelting Reduction Process Based on MnO-SiO2-Al2O3 Slag System

Songwen Xiao et al.

JOURNAL OF SUSTAINABLE METALLURGY (2017)

Add to Collection

Article Engineering, Environmental

Environmentally-friendly oxygen-free roasting/wet magnetic separation technology for in situ recycling cobalt, lithium carbonate and graphite from spent LiCoO2/graphite lithium batteries

Jia Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries

Debasish Mohanty et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Materials Science, Characterization & Testing

The HighScore suite

Thomas Degen et al.

POWDER DIFFRACTION (2014)

Add to Collection

Article Chemistry, Physical

Development of a recycling process for Li-ion batteries

T. Georgi-Maschler et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Engineering, Environmental

Vacuum pyrolysis and hydrometallurgical process for the recovery of valuable metals from spent lithium-ion batteries

Liang Sun et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Add to Collection

Article Engineering, Chemical

Recovery of Valuable Metals from Battery Scrap

Matthias Vest et al.

CHEMIE INGENIEUR TECHNIK (2010)

Add to Collection

Article Thermodynamics

FactSage thermochemical software and databases

C Bale et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.