Related references
Note: Only part of the references are listed.Comparative Study of the Wear Behavior of B4C Monolayered and CrN/CrCN/DLC Multilayered Physical Vapor Deposition Coatings Under High Contact Loads: An Experimental Analysis
F. J. G. Silva et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2022)
Fabrication processes of metal-fiber reinforced polymer hybrid components: a review
Junying Min et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)
Experimental study on the wear behavior of B4C and TiB2 monolayered PVD coatings under high contact loads
Rafaela Casais et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
Recent Advances on Cryogenic Assistance in Drilling Operation: A Critical Review
Hongguang Liu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON GFRP AND AA 6061 LAMINATE COMPOSITES FOR DEEP-DRAWING APPLICATIONS
Kavitha Kalidass et al.
MATERIALI IN TEHNOLOGIJE (2022)
Determination of the optimal milling feed direction for unidirectional CFRPs using a predictive cutting-force model
Dong-Gyu Kim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
A state-of-the-art review on mechanical characteristics of different fiber metal laminates for aerospace and structural applications
Hamza El Etri et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
Prediction of TiAlN- and TiN-coated carbide tool wear in drilling of bidirectional CFRP laminates using wavelet packets of thrust-torque signatures
Tarakeswar Barik et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)
Temperature analysis in fiber metal laminates drilling: Experimental and numerical results
Gianluca Parodo et al.
POLYMER COMPOSITES (2022)
Evaluation of Surface Treatment for Enhancing Adhesion at the Metal-Composite Interface in Fibre Metal-Laminates
Magda Drozdziel-Jurkiewicz et al.
MATERIALS (2022)
Wear characteristics of multi-tooth milling cutter in milling CFRP and its impact on machining performance
Guangjian Bi et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
Synthesis and characterization of fabricated fiber metal laminates for aerospace applications
K. Lakshmi Kala et al.
MATERIALS TODAY-PROCEEDINGS (2022)
A Review on Drilling of Multilayer Fiber-Reinforced Polymer Composites and Aluminum Stacks: Optimization of Strategies for Improving the Drilling Performance of Aerospace Assemblies
Gerald Franz et al.
FIBERS (2022)
Effect of Different Coupling Agents on Interfacial Properties of Fibre-Reinforced Aluminum Laminates
Wei Zhu et al.
MATERIALS (2021)
Friction-based processes for hybrid multi-material joining
Francesco Lambiase et al.
COMPOSITE STRUCTURES (2021)
Adhesive bond strength enhancing between carbon fiber reinforced polymer and aluminum substrates with different surface morphologies created by three sulfuric acid solutions
Fei Cheng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Interlayer bonding between thermoplastic composites and metals by in-situ polymerization technique
Colin Robert et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Performance evaluation of the minimum quantity lubrication with Al2O3-mixed vegetable-oil-based cutting fluid in drilling of AISI 321 stainless steel
Amrit Pal et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
The Effect of Cryogenic Cooling and Drill Bit on the Hole Quality when Drilling Magnesium-based Fiber Metal Laminates
R. Bertolini et al.
49TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 49, 2021) (2021)
On the interfacial adhesion of fiber metal laminates using surface modified aluminum 7475 alloy for aviation industries ? a study
M. Thirukumaran et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)
A review on the hybrid titanium composite laminates (HTCLs) with focuses on surface treatments, fabrications, and mechanical properties
M. E. Kazemi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminate
Alberto L. Santos et al.
COMPOSITES PART B-ENGINEERING (2020)
The effect of cutting tool coating on the form and dimensional errors of machined holes in GLARE® fibre metal laminates
K. Giasin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences
Qinglong An et al.
COMPOSITE STRUCTURES (2020)
Investigation of hole quality in drilled Ti/CFRP/Ti laminates using CO2 laser
Dhiraj Kumar et al.
OPTICS AND LASER TECHNOLOGY (2020)
Machinability and surface integrity of adhesively bonded Ti/CFRP/Ti hybrid composite laminates under dry and cryogenic conditions
D. Kumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
A review: drilling performance and hole quality of aluminium alloys for aerospace applications
Muhammad Aamir et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Experimental and numerical investigation of fiber metal laminate forming behavior using a variable blank holder force
Hamza Blala et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2020)
Multi Response Optimization of Fabrication Parameters of Carbon Fiber-Reinforced Aluminium Laminates (CARAL): By Taguchi Method and Gray Relational Analysis
B. Muthu Chozha Rajan et al.
POLYMER COMPOSITES (2019)
Surface integrity while trimming of composite structures: X-ray tomography analysis
N. Nguyen-Dinh et al.
COMPOSITE STRUCTURES (2019)
Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates
K. Giasin et al.
COMPOSITE STRUCTURES (2019)
A Composite Evaluation Model of Sustainable Manufacturing in Machining Process for Typical Machine Tools
Lishu Lv et al.
PROCESSES (2019)
Deep drawing of fiber metal laminates for automotive lightweight structures
T. Heggemann et al.
COMPOSITE STRUCTURES (2019)
Effect of processing parameters on the fabrication of fiber metal laminates by vacuum infusion process
Soheil Dariushi et al.
POLYMER COMPOSITES (2019)
A new process route for the manufacturing of highly formed fiber-metal-laminates with elastomer interlayers (FMEL)
S. Roth et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of temperature and fiber type on impact behavior of thermoplastic fiber metal laminates
Fabrizio Sarasini et al.
COMPOSITE STRUCTURES (2019)
Mechanical analysis and progressive failure prediction for fibre metal laminates using a 3D constitutive model
Kai Jin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Comparison of interfacial adhesion of hybrid materials of aluminum/carbon fiber reinforced epoxy composites with different surface roughness
Dong-Jun Kwon et al.
COMPOSITES PART B-ENGINEERING (2019)
Characterization and properties of AA6061-based fiber metal laminates with different aluminum-surface pretreatments
Wei Zhu et al.
COMPOSITE STRUCTURES (2019)
Review on the methodologies adopted to minimize the material damages in drilling of carbon fiber reinforced plastic composites
K. M. John et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Novel thermoplastic fibre-metal laminates manufactured by vacuum resin infusion: The effect of surface treatments on interfacial bonding
Dimitrios Mamalis et al.
MATERIALS & DESIGN (2019)
Dual-energy computed tomography investigation of additive manufacturing aluminium-carbon-fibre composite joints
Anton Jansson et al.
HELIYON (2019)
Analytical and experimental investigation of the delamination during drilling of composite structures with core drill made of diamond grits: X-ray tomography analysis
Jamel Saoudi et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Experimental studies on a two-step technique to reduce delamination damage during milling of large diameter holes in CFRP/Al stack
Gong-Dong Wang et al.
COMPOSITE STRUCTURES (2018)
Multi-material adhesive joints for automotive industry
M. D. Banea et al.
COMPOSITES PART B-ENGINEERING (2018)
The effect of drilling parameters, cooling technology, and fiber orientation on hole perpendicularity error in fiber metal laminates
K. Giasin
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Towards sustainability assessment of machining processes
H. A. Hegab et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Wear behaviour of CVD diamond-coated tools in the drilling of woven CFRP composites
Chunliang Kuo et al.
WEAR (2018)
3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis
Khaled Giasin et al.
APPLIED COMPOSITE MATERIALS (2017)
A review of helical milling process
Robson Bruno Dutra Pereira et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Carbon fiber-reinforced polymer composite drilling via aluminum chromium nitride-coated tools: Hole quality and tool wear assessment
Muhammad Harris et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Tool wear and hole quality in drilling of CFRP/AA7075 stacks with DLC and nanocomposite TiA1N coated tools
A. D'Orazio et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Improving the Wear Resistance of Moulds for the Injection of Glass Fibre-Reinforced Plastics Using PVD Coatings: A Comparative Study
Francisco Silva et al.
COATINGS (2017)
A Novel Concept Of Production And Assembly Processes Integration
B. M. D. N. Moreira et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Optimising a specific tool for electrical terminals crimping process
T. A. M. Castro et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
Kamyar Shirvanimoghaddam et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets
Xin Li et al.
COMPOSITE STRUCTURES (2017)
Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks
R. Zitoune et al.
COMPOSITE STRUCTURES (2016)
Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification
Jamel Saoudi et al.
COMPOSITE STRUCTURES (2016)
A comparative study on helical milling of CFRP/Ti stacks and its individual layers
Haiyan Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
Anuj Kumar Sharma et al.
JOURNAL OF CLEANER PRODUCTION (2016)
The effects of minimum quantity lubrication and cryogenic liquid nitrogen cooling on drilled hole quality in GLARE fibre metal laminates
K. Giasin et al.
MATERIALS & DESIGN (2016)
Analysis of hole quality in drilling GLARE fiber metal laminates
Omanath A. Pawar et al.
COMPOSITE STRUCTURES (2015)
Sustainable Fractal Manufacturing: a new approach to sustainability in machining processes
M. E. Peralta et al.
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 (2015)
Drilling Temperature and Hole Quality in Drilling of CFRP/Aluminum Stacks Using Diamond Coated Drill
Chang-Ying Wang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Performance evaluation of carbide tools in drilling CFRP-Al stacks
S. Alizadeh Ashrafi et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Computed Tomography as a Tool for Examining Surface Integrity in Drilled Holes in CFRP Composites
Lars Pejryd et al.
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) (2014)
Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools
Yigit Karpat et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
A review of modeling and control during drilling of fiber reinforced plastic composites
Amrinder Pal Singh et al.
COMPOSITES PART B-ENGINEERING (2013)
Evaluation of the performance of coated and uncoated carbide tools in drilling thick CFRP/aluminium alloy stacks
M. Montoya et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Temperature measurement of cutting tool and machined surface layer in milling of CFRP
Takeshi Yashiro et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Study on Tool Wear and Chip Formation during Drilling Carbon Fiber Reinforced Polymer (CFRP)/Titanium Alloy (Ti6Al4V) Stacks
M. SenthilKumar et al.
INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013) (2013)
COMPARATIVE STUDY IN THE PASSIVE FORCE AND CUTTING TORQUE IN THE MILLING PROCESS OF POLYMER MATRIX COMPOSITES AND ALUMINUM ALLOYS
Krzysztof Ciecielag et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2013)
Modeling of machining of composite materials: A review
Chinmaya R. Dandekar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Reduction of Burr Formation in Drilling Using Cryogenic Process Cooling
D. Biermann et al.
45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 (2012)
Fatigue damage development in new fibre metal laminates made by the VARTM process
E. K. Baumert et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)
Hole quality assessment following drilling of metallic-composite stacks
I. S. Shyha et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
A review: Fibre metal laminates, background, bonding types and applied test methods
Tamer Sinmazcelik et al.
MATERIALS & DESIGN (2011)
Study of drilling of composite material and aluminium stack
Redouane Zitoune et al.
COMPOSITE STRUCTURES (2010)
Effects of surface pre-treatment and void content on GLARE laminate process characteristics
Sang Yoon Park et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Cutting forces and wear analysis of Si3N4 diamond coated tools in high speed machining
R. P. Martinho et al.
VACUUM (2008)
Helical milling: An enabling technology for hard machining precision holes in AISI D2 tool steel
R. Iyer et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
The prediction of tensile failure in titanium-based thermoplastic fibre-metal laminates
P. Cortes et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
The fracture properties of a fibre-metal laminate based on magnesium alloy
P Cortes et al.
COMPOSITES PART B-ENGINEERING (2006)
Unstressed PACVD diamond films on steel pre-coated with a composite multilayer
FJG Silva et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Manufacturing of GLARE parts and structures
J Sinke
APPLIED COMPOSITE MATERIALS (2003)
Machining of composite materials
R Teti
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Share Paper
