Related references
Note: Only part of the references are listed.Methodology for the Path Definition in Multi-Layer Gas Metal Arc Welding (GMAW)
David Curiel et al.
SYMMETRY-BASEL (2023)
Automated process planning for conformal wire arc additive manufacturing
Prahar M. Bhatt et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
Wire arc additive manufacturing of invar parts: Bead geometry and melt pool monitoring
Fernando Veiga et al.
MEASUREMENT (2022)
A Review of Non-Destructive Testing (NDT) Techniques for Defect Detection: Application to Fusion Welding and Future Wire Arc Additive Manufacturing Processes
Masoud Shaloo et al.
MATERIALS (2022)
Spectroscopic Approach for the On-Line Monitoring of Welding of Tanker Trucks
Jose J. Valdiande et al.
APPLIED SCIENCES-BASEL (2022)
Deep Neural Networks for Defects Detection in Gas Metal Arc Welding
Luigi Nele et al.
APPLIED SCIENCES-BASEL (2022)
On-line monitoring and defect detection of arc-welding via plasma optical spectroscopy and LIBS
J. J. Valdiande et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2022)
Symmetry and Its Application in Metal Additive Manufacturing (MAM)
Virginia Uralde et al.
SYMMETRY-BASEL (2022)
Penetration State Identification from Stereo Image Pair of Weld Pool in GMAW Process by Deep Learning
Zhimin Liang et al.
2022 IEEE 18TH INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE) (2022)
Comprehensive review of wire arc additive manufacturing: Hardware system, physical process, monitoring, property characterization, application and future prospects
Yan Li et al.
RESULTS IN ENGINEERING (2022)
Simulation and experiment for dynamics of laser welding keyhole and molten pool at different penetration status
Yanzhu Feng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Laser Ultrasonic inspection of a Wire plus Arc Additive Manufactured (WAAM) sample with artificial defects
Yan Zeng et al.
ULTRASONICS (2021)
Mixed Reality-Enhanced Intuitive Teleoperation with Hybrid Virtual Fixtures for Intelligent Robotic Welding
Yun-Peng Su et al.
APPLIED SCIENCES-BASEL (2021)
Coordinated monitoring and control method of deposited layer width and reinforcement in WAAM process
Yiming Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Real-time sensing of gas metal arc welding process-A literature review and analysis
Yongchao Cheng et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Auxiliary energy-assisted arc welding processes and their modelling, sensing and control
Lin Wang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)
Model for the Prediction of Deformations in the Manufacture of Thin-Walled Parts by Wire Arc Additive Manufacturing Technology
Mikel Casuso et al.
METALS (2021)
Gas metal arc welding based additive manufacturing-a review
Suvranshu Pattanayak et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
Research and prospect of welding monitoring technology based on machine vision
Xi'an Fan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
An adaptive orbital system based on laser vision sensor for pipeline GMAW welding
Regis Henrique Goncalves e Silva et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)
Real-Time Detection of Weld Defects for Automated Welding Process Base on Deep Neural Network
Seungmin Shin et al.
METALS (2020)
A review on in situ monitoring technology for directed energy deposition of metals
Zi-jue Tang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Advanced Welding Manufacturing: A Brief Analysis and Review of Challenges and Solutions
Yu Ming Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Model-free adaptive iterative learning control of melt pool width in wire arc additive manufacturing
Chunyang Xia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Tracking the Welding Line in Lap Welding Using Pattern Matching
Satoshi Yamane
ISIJ INTERNATIONAL (2020)
A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Chunyang Xia et al.
JOURNAL OF MANUFACTURING SYSTEMS (2020)
Comparison of Nondestructive Testing Methods for Solder, Sinter, and Adhesive Interconnects in Power and Opto-Electronics
Maximilian Schmid et al.
APPLIED SCIENCES-BASEL (2020)
Open source arc analyzer: Multi-sensor monitoring of wire arc additive manufacturing
Adam M. Pringle et al.
HARDWAREX (2020)
Gas Metal Arc Welding Process Parameter Optimization to Reduce Porosity Defect in a Longitudinal Seam Welding of Pressure Vessels
A. Kuppusamy et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2020)
Weld Reinforcement Analysis Based on Long-Term Prediction of Molten Pool Image in Additive Manufacturing
Yiming Wang et al.
IEEE ACCESS (2020)
In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes
Mojtaba Khanzadeh et al.
IISE TRANSACTIONS (2019)
Advances in weld seam tracking techniques for robotic welding: A review
Amruta Rout et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
Analysis of the Machining Process of Inconel 718 Parts Manufactured by Laser Metal Deposition
Txomin Ostra et al.
MATERIALS (2019)
EMD- PNN based welding defects detection using laser-induced plasma electrical signals
Yiming Huang et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Assessment of Weld Bead Mechanical Properties During Destructive Testing Using Image Processing by Multivision Technique
Rudreshi Addamani et al.
EMERGING RESEARCH IN ELECTRONICS, COMPUTER SCIENCE AND TECHNOLOGY, ICERECT 2018 (2019)
Progress on Artificial Neural Networks for Big Data Analytics: A Survey
Haruna Chiroma et al.
IEEE ACCESS (2019)
Instant detection of porosity in gas metal arc welding by using probability density distribution and control chart
Dinu Thomas Thekkuden et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Measurement and estimation of the weld bead geometry in arc welding processes: the last 50 years of development
Guillermo Alvarez Bestard et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
Bintao Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Decision tree based weld defect classification using current and voltage signatures in GMAW process
A. Sumesh et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Effects of shielding gas control: welded joint properties in GMAW process optimization
Belinga Mvola et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Porosity detection by analyzing arc sound signal acquired during the welding process of gas pipeline steel
M. F. M. Yusof et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Influence of molten metal flow on undercutting formation in GMAW
R. Zong et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2017)
Automatic welding quality classification for the spot welding based on the Hopfield associative memory neural network and Chernoff face description of the electrode displacement signal features
Hongjie Zhang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Tight butt joint weld detection based on optical flow and particle filtering of magneto-optical imaging
Xiangdong Gao et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Residual Stresses with Time-Independent Cyclic Plasticity in Finite Element Analysis ofWelded Joints
Ruben Lostado Lorza et al.
METALS (2017)
The role of additive manufacturing in the era of Industry 4.0
Ugur M. Dilberoglu et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part
Donghong Ding et al.
COMPUTER-AIDED DESIGN (2016)
Real-time radiography for observation of crack growth during GTA welding
F. T. Boateng et al.
WELDING IN THE WORLD (2016)
Plasma arc welding: Process variants and its recent developments of sensing, controlling and modeling
Zu Ming Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Online monitoring and evaluation of the weld quality of resistance spot welded titanium alloy
S. Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Automatic weld defect detection method based on Kalman filtering for real-time radiographic inspection of spiral pipe
Yirong Zou et al.
NDT & E INTERNATIONAL (2015)
A Perspective on Arc Welding Research: The Importance of the Arc, Unresolved Questions and Future Directions
Anthony B. Murphy
PLASMA CHEMISTRY AND PLASMA PROCESSING (2015)
Additive Manufacturing of Metal Parts by Welding
R. J. Silva et al.
IFAC PAPERSONLINE (2015)
Robotic arc welding sensors and programming in industrial applications
P. Kah et al.
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING (2015)
Online welding quality monitoring based on feature extraction of arc voltage signal
Zhifen Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Neural Network of Plume and Spatter for Monitoring High-Power Disk Laser Welding
Xiangdong Gao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2014)
Plasma arc welding: Process, sensing, control and modeling
C. S. Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2014)
NUsability of arc types in industrial welding
Paul Kah et al.
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING (2014)
Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing
Jun Xiong et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Real-time defect detection in pulsed GTAW of Al alloys through on-line spectroscopy
Zhifen Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
An effective quality assessment method for small scale resistance spot welding based on process parameters
Dawei Zhao et al.
NDT & E INTERNATIONAL (2013)
Surface crack detection in welds using thermography
Patrik Broberg
NDT & E INTERNATIONAL (2013)
Formation of self-organized anode patterns in arc discharge simulations
Juan Pablo Trelles
PLASMA SOURCES SCIENCE & TECHNOLOGY (2013)
Multi-sensor based prediction of metal deposition in pulsed gas metal arc welding using various soft computing models
Sandip Bhattacharya et al.
APPLIED SOFT COMPUTING (2012)
Control of melt pool temperature and deposition height during direct metal deposition process
Lijun Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Automatic defect identification using thermal image analysis for online weld quality monitoring
U. Sreedhar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Study of Dynamic Features of Surface Plasma in High-Power Disk Laser Welding
Wang Teng et al.
PLASMA SCIENCE & TECHNOLOGY (2012)
Sensors for Quality Control in Welding
Sadek Crisostomo Absi Alfaro
SOLDAGEM & INSPECAO (2012)
NEW FINDINGS ON THE EFFICIENCY OF GAS SHIELDED ARC WELDING
A. Haelsig et al.
WELDING IN THE WORLD (2012)
Weld bead modeling and process optimization in Hybrid Layered Manufacturing
S. Suryakumar et al.
COMPUTER-AIDED DESIGN (2011)
An Arc Welding Robot Control for a Shaped Metal Deposition Plant: Modular Software Interface and Sensors
Filippo Bonaccorso et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2011)
Effect of Pulse Parameters on Weld Quality in Pulsed Gas Metal Arc Welding: A Review
Kamal Pal et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Vision-based clad height measurement
Tyler A. Davis et al.
MACHINE VISION AND APPLICATIONS (2011)
Monitoring of Weld Penetration Using Arc Acoustics
Kamal Pal et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
High speed imaging technique Part 1-high speed imaging of arc welding phenomena
Y. Ogawa
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Applicability of Monitoring of Electric Arc Emissions for Quality Control in MAG-S Process
Eber Huanca Cayo et al.
SOLDAGEM & INSPECAO (2011)
An adaptive-network-based fuzzy inference system for classification of welding defects
Juan Zapata et al.
NDT & E INTERNATIONAL (2010)
Exploring Infrared Sensoring for Real Time Welding Defects Monitoring in GTAW
Sadek C. A. Alfaro et al.
SENSORS (2010)
Prediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG welding
Kamal Pal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Real-time arc-welding defect detection and classification with principal component analysis and artificial neural networks
J. Mirapeix et al.
NDT & E INTERNATIONAL (2007)
Plasma spectroscopy analysis technique based on optimization algorithms and spectral synthesis for arc-welding quality assurance
J. Mirapeix et al.
OPTICS EXPRESS (2007)
Emission spectrometry evaluation in arc welding monitoring system
Sadek C. A. Alfaro et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Detection of embedded fatigue cracks in Inconel weld overlay and the evaluation of the minimum thickness of the weld overlay using eddy current testing
Noritaka Yusa et al.
NUCLEAR ENGINEERING AND DESIGN (2006)
Real-time arc welding defect detection technique by means of plasma spectrum optical analysis
J Mirapeix et al.
NDT & E INTERNATIONAL (2006)
Selection of parameters of pulsed current gas metal arc welding
PK Palani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Real-time top-face vision based control of weld pool size
JS Smith et al.
INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL (2005)
Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc welding
L Grad et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
A sensing torch for on-line monitoring of the gas tungsten arc welding process of steel pipes
A Ancona et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2004)
Numerical analysis of metal transfer in gas metal arc welding
G Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)
Multivariable adaptive control of the bead profile geometry in gas metal arc welding with thermal scanning
C Doumanidis et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2002)
Geometry modeling and control by infrared and laser sensing in thermal manufacturing with material deposition
C Doumanidis et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2001)
Share Paper
