Related references
Note: Only part of the references are listed.Polylactic acid (PLA) membrane-significance, synthesis, and applications: a review
Neha More et al.
POLYMER BULLETIN (2023)
In vitro and in vivo efficacy of poly(lactic acid) nanofiber packaging containing essential oils from Ocimum basilicum L. and Ocimum gratissimum L. against Aspergillus carbonarius and Aspergillus niger in table grapes
Rafaela Magalhaes Brandao et al.
FOOD CHEMISTRY (2023)
3D printing of polylactic acid: recent advances and opportunities
Tomy Muringayil Joseph et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)
Asiaticoside polymeric nanoparticles for effective diabetic wound healing through increased collagen biosynthesis: In-vitro and in-vivo evaluation
Saibhargav Narisepalli et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2023)
Recent advances on injectable nanocomposite hydrogels towards bone tissue rehabilitation
Kapender Phogat et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2023)
3D printed poly(lactic acid)-based nanocomposite scaffolds with bioactive coatings for tissue engineering applications
Maria-Eirini Grigora et al.
JOURNAL OF MATERIALS SCIENCE (2023)
Magnetic polylactic acid-calcium phosphate-based biocomposite as a potential biomaterial for tissue engineering applications
Tania S. S. Carvalho et al.
MATERIALS CHEMISTRY AND PHYSICS (2023)
Rosmarinic and Glycyrrhetinic Acid-Modified Layered Double Hydroxides as Functional Additives for Poly(Lactic Acid)/Poly(Butylene Succinate) Blends
Francesca Cicogna et al.
MOLECULES (2023)
The highly absorbent polyurethane/polylactic acid blend electrospun tissue scaffold for dermal wound dressing
Sema Samatya Yilmaz et al.
POLYMER BULLETIN (2023)
Synthesis and characterization of biphasic layered structure composite with simultaneous electroconductive and piezoelectric behavior as a scaffold for bone tissue engineering
Mina Shabani Samghabadi et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2023)
Biodegradable and Bioabsorbable Polylactic Acid Ferroelectrets with Prominent Piezoelectric Activity
Xingchen Ma et al.
ADVANCED ELECTRONIC MATERIALS (2023)
Natural, synthetic and commercially-available biopolymers used to regenerate tendons and ligaments
Behzad Shiroud Heidari et al.
BIOACTIVE MATERIALS (2023)
Embedding Silk Fibroin-Alginate Hydrogel in a 3D-Printed Porous Poly(Lactic Acid) Bone Tissue Scaffold Augments Stem Cell Function
Monika Rajput et al.
REGENERATIVE ENGINEERING AND TRANSLATIONAL MEDICINE (2023)
Improved thermal insulation and compressive property of bimodal poly (lactic acid)/cellulose nanocomposite foams
Qian Ren et al.
CARBOHYDRATE POLYMERS (2023)
Hydroxyapatite - Al2O3 reinforced poly- (lactic acid) hybrid coatings on magnesium: Characterization, mechanical and in-vitro bioactivity properties
Mehmet Topuz
SURFACES AND INTERFACES (2023)
Controlled growth factor delivery via a degradable poly(lactic acid) hydrogel microcarrier synthesized using degassed micromolding lithography
Wookyoung Jang et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2023)
4D printing of shape memory polybutylene succinate/polylactic acid (PBS/PLA) and its potential applications
Cheng Lin et al.
COMPOSITE STRUCTURES (2022)
Tailoring of advanced poly(lactic acid)-based materials: A review
Stoja Milovanovic et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2022)
Poly (ε-caprolactone)/Poly (lactic acid) fibers produced by rotary jet spinning for skin dressing with antimicrobial activity
Juliana C. Rosa et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2022)
High-resolution structure of phosphoketolase from Bifidobacterium longum determined by cryo-EM single-particle analysis
Kunio Nakata et al.
JOURNAL OF STRUCTURAL BIOLOGY (2022)
Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications
R. A. Ilyas et al.
POLYMERS (2022)
Poly(Lactic Acid)-Based Microparticles for Drug Delivery Applications: An Overview of Recent Advances
Antonios Vlachopoulos et al.
PHARMACEUTICS (2022)
How far is Lignin from being a biomedical material?
Sigit Sugiarto et al.
BIOACTIVE MATERIALS (2022)
Poly(lactic acid)-Based Electrospun Fibrous Structures for Biomedical Applications
Homa Maleki et al.
APPLIED SCIENCES-BASEL (2022)
Fermentative Lactic Acid Production From Lignocellulosic Feedstocks: From Source to Purified Product
Dragomir Yankov
FRONTIERS IN CHEMISTRY (2022)
Rotary jet-spun curcumin-loaded poly L-lactic acid membranes for wound-healing applications
Karla A. Barbosa et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Lignin-Based Porous Biomaterials for Medical and Pharmaceutical Applications
Nan Nan et al.
BIOMEDICINES (2022)
Borrowing the Features of Biopolymers for Emerging Wound Healing Dressings: A Review
Ioannis Gardikiotis et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)
Fabrication of 3D Printed poly(lactic acid) strut and wet-electrospun cellulose nano fiber reinforced chitosan-collagen hydrogel composite scaffolds for meniscus tissue engineering
Oylum Colpankan Gunes et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2022)
Rotary Jet Spinning (RJS): A Key Process to Produce Biopolymeric Wound Dressings
Juliana O. Bahu et al.
PHARMACEUTICS (2022)
Performance of polylactic acid/polycaprolactone/microcrystalline cellulose biocomposites with different filler contents and maleic anhydride compatibilization
Gaoyuan Ye et al.
POLYMER COMPOSITES (2022)
PLA-lignin nanofibers as antioxidant biomaterials for cartilage regeneration and osteoarthritis treatment
Ruiming Liang et al.
JOURNAL OF NANOBIOTECHNOLOGY (2022)
Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications
Zia Ullah Arif et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)
Role of Maleic Anhydride-Grafted Poly(lactic acid) in Improving Shape Memory Properties of Thermoresponsive Poly(ethylene glycol) and Poly(lactic acid) Blends
Wasana Nonkrathok et al.
POLYMERS (2022)
A Concise Review on Electrospun Scaffolds for Kidney Tissue Engineering
Claudia C. Miranda et al.
BIOENGINEERING-BASEL (2022)
Mechanisms underlying lactic acid tolerance and its influence on lactic acid production in Saccharomyces cerevisiae
Arne Peetermans et al.
MICROBIAL CELL (2021)
Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels
Victoria G. Muir et al.
CHEMICAL REVIEWS (2021)
A Review of the Recent Developments in the Bioproduction of Polylactic Acid and Its Precursors Optically Pure Lactic Acids
Shiyong Huang et al.
MOLECULES (2021)
Hydrolytic Degradation of Polylactic Acid Fibers as a Function of pH and Exposure Time
Radhika Vaid et al.
MOLECULES (2021)
Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction
Hui Shi et al.
CRYSTALS (2021)
Multi-product biorefinery from Arthrospira platensis biomass as feedstock for bioethanol and lactic acid production
Diego A. Esquivel-Hernandez et al.
SCIENTIFIC REPORTS (2021)
Degradation mechanisms and acceleration strategies of poly (lactic acid) scaffold for bone regeneration
Pei Feng et al.
MATERIALS & DESIGN (2021)
Effect of a plasma synthesized polypyrrole coverage on polylactic acid/hydroxyapatite scaffolds for bone tissue engineering
Maria G. Flores-Sanchez et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2021)
Metabolism Characteristics of Lactic Acid Bacteria and the Expanding Applications in Food Industry
Yaqi Wang et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
4D printing of shape memory polylactic acid (PLA)
Mehrshad Mehrpouya et al.
POLYMER (2021)
Biomimetic hydrogels designed for cartilage tissue engineering
Kresanti D. Ngadimin et al.
BIOMATERIALS SCIENCE (2021)
Hydroxyapatite nano bioceramics optimized 3D printed poly lactic acid scaffold for bone tissue engineering application
Sudip Mondal et al.
CERAMICS INTERNATIONAL (2020)
Lignin-Based Micro- and Nanomaterials and their Composites in Biomedical Applications
Rui Liu et al.
CHEMSUSCHEM (2020)
Hybrid Bilayer PLA/Chitosan Nanofibrous Scaffolds Doped with ZnO, Fe3O4, and Au Nanoparticles with Bioactive Properties for Skin Tissue Engineering
Julia Radwan-Praglowska et al.
POLYMERS (2020)
Lactic Acid Fermentation of Cereals and Pseudocereals: Ancient Nutritional Biotechnologies with Modern Applications
Penka Petrova et al.
NUTRIENTS (2020)
3D Hierarchical, Nanostructured Chitosan/PLA/HA Scaffolds Doped with TiO2/Au/Pt NPs with Tunable Properties for Guided Bone Tissue Engineering
Julia Radwan-Praglowska et al.
POLYMERS (2020)
In vitro evaluation of Zeolite-nHA blended PCL/PLA nanofibers for dental tissue engineering
Sanam Mohandesnezhad et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Lignin-graft-PLGA drug-delivery system improves efficacy of MEK1/2 inhibitors in triple-negative breast cancer cell line
C. Ethan Byrne et al.
NANOMEDICINE (2020)
Advancement of Nanobiomaterials to Deliver Natural Compounds for Tissue Engineering Applications
Sathish Sundar Dhilip Kumar et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)
A review on degradation mechanisms of polylactic acid: Hydrolytic, photodegradative, microbial, and enzymatic degradation
Nor Fasihah Zaaba et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Study on the properties of PLA/PBAT composite modified by nanohydroxyapatite
Dongsheng Yan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Application of electrospun nanofibers in bone, cartilage and osteochondral tissue engineering
Huixiu Ding et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2020)
Role of Hydrogels in Bone Tissue Engineering: How Properties Shape Regeneration
Yanting Wu et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2020)
Properties of non-woven polylactic acid fibers prepared by the rotational jet spinning method
W. Rodchanasuripron et al.
MATERIALS TODAY SUSTAINABILITY (2020)
Novel Nanocomposite PLA Films with Lignin/Zinc Oxide Hybrids: Design, Characterization, Interaction with Mesenchymal Stem Cells
Francesca Luzi et al.
NANOMATERIALS (2020)
Preparation of nanofibre material based on electrospinning technology and its application in rehabilitation of lower limb joint motion
Naxin Zhang
INTERNATIONAL JOURNAL OF NANOTECHNOLOGY (2020)
Biodegradable poly (lactic acid-co-trimethylene carbonate)/chitosan microsphere scaffold with shape-memory effect for bone tissue engineering
Xulin Hu et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2020)
Lactic acid production - producing microorganisms and substrates sources-state of art
Elahe Abedi et al.
HELIYON (2020)
Polypyrrole-Incorporated Conducting Constructs for Tissue Engineering Applications: A Review
Yeshi Liang et al.
BIOELECTRICITY (2020)
Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling
Carola Esposito Corcione et al.
CERAMICS INTERNATIONAL (2019)
Tissue engineering scaffolds in the treatment of brain disorders in geriatric patients
Alireza Dehqan Niri et al.
ARTIFICIAL ORGANS (2019)
Effect of Co-Inoculation with Saccharomyces cerevisiae and Lactic Acid Bacteria on the Content of Propan-2-ol, Acetaldehyde and Weak Acids in Fermented Distillery Mashes
Katarzyna Pielech-Przybylska et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
Using Dimensionless Numbers to Predict Centrifugal Jet-Spun Nanofiber Morphology
Prashanth Ravishankar et al.
JOURNAL OF NANOMATERIALS (2019)
3D Bioprinting of cardiac tissue and cardiac stem cell therapy
Matthew Alonzo et al.
TRANSLATIONAL RESEARCH (2019)
Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering
Shadi Hassanajili et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Bone grafts: which is the ideal biomaterial?
Havard Jostein Haugen et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2019)
Reconstructive urology and tissue engineering: Converging developmental paths
Jan Adamowicz et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
Bio-based composite fibers from pine essential oil and PLA/PBAT polymer blend. Morphological, physicochemical, thermal and mechanical characterization
Monica Hernandez-Lopez et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
PLA/PCL-based foams as scaffolds for tissue engineering applications
Luciana Sartore et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Polypyrrole/polylactic acid nanofibrous scaffold cotransplanted with bone marrow stromal cells promotes the functional recovery of spinal cord injury in rats
Raynald et al.
CNS NEUROSCIENCE & THERAPEUTICS (2019)
Electrospinning polymer blend of PLA and PBAT: Electrospinnability-solubility map and effect of polymer solution parameters toward application as antibiotic-carrier mats
Sarunphat Khatsee et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Composite porous scaffold of PEG/PLA support improved bone matrix deposition in vitro compared to PLA-only scaffolds
Birru Bhaskar et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Polylactic acid blends: The future of green, light and tough
Kotiba Hamad et al.
PROGRESS IN POLYMER SCIENCE (2018)
Utilization of lactic acid in human myotubes and interplay with glucose and fatty acid metabolism
Jenny Lund et al.
SCIENTIFIC REPORTS (2018)
The use of chitosan/PLA nano-fibers by emulsion eletrospinning for periodontal tissue engineering
Renze Shen et al.
ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2018)
A review of using green chemistry methods for biomaterials in tissue engineering
Hossein Jahangirian et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2018)
Multilevel structural stereocomplex polylactic acid/collagen membranes by pattern electrospinning for tissue engineering
Yuan Kang et al.
POLYMER (2018)
Current and novel polymeric biomaterials for neural tissue engineering
Rossana Boni et al.
JOURNAL OF BIOMEDICAL SCIENCE (2018)
Sequential VEGF and BMP-2 releasing PLA-PEG-PLA scaffolds for bone tissue engineering: I. Design and in vitro test
Sinan Egri et al.
ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2017)
Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies
M. Nofar et al.
EUROPEAN POLYMER JOURNAL (2017)
Composite poly(lactic acid)/chitosan nanofibrous scaffolds for cardiac tissue engineering
Yaowen Liu et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)
Comprehensive mechanical characterization of PLA fabric combined with PCL to form a composite structure vascular graft
Chaojing Li et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Surface biofunctionalization of three-dimensional porous poly(lactic acid) scaffold using chitosan/OGP coating for bone tissue engineering
Sen Zeng et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Lactic Acid Bacteria and Their Bacteriocins: Classification, Biosynthesis and Applications against Uropathogens: A Mini-Review
Mduduzi Paul Mokoena
MOLECULES (2017)
Electrospun PHEA-PLA/PCL Scaffold for Vascular Regeneration: A Preliminary in Vivo Evaluation
S. Buscemi et al.
TRANSPLANTATION PROCEEDINGS (2017)
Skin Tissue Engineering: Application of Adipose-Derived Stem Cells
Agnes S. Klar et al.
BIOMED RESEARCH INTERNATIONAL (2017)
Pediococcus spp.: An important genus of lactic acid bacteria and pediocin producers
Maria Carolina W. Porto et al.
BIOTECHNOLOGY ADVANCES (2017)
Enhancement of neurite adhesion, alignment and elongation on conductive polypyrrole-poly(lactide acid) fibers with cell-derived extracellular matrix
Xingxing Zhou et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2017)
Chirality Matters: Synthesis and Consumption of the D-Enantiomer of Lactic Acid by Synechocystis sp Strain PCC6803
S. Andreas Angermayr et al.
APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2016)
Poly(lactic acid) blends in biomedical applications
P. Saini et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Biocompatibility and safety of PLA and its copolymers
Yuval Ramot et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Biotechnological production of enantiomerically pure d-lactic acid
Silvia Klotz et al.
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2016)
Synergistic effect of topography, surface chemistry and conductivity of the electrospun nanofibrous scaffold on cellular response of PC12 cells
Lingling Tian et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2016)
Prospects of chitosan-based scaffolds for growth factor release in tissue engineering
P. R. Sivashankari et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)
Advances in tissue engineering
Robert Langer et al.
JOURNAL OF PEDIATRIC SURGERY (2016)
Extracellular Metabolites from Industrial Microalgae and Their Biotechnological Potential
Lu Liu et al.
MARINE DRUGS (2016)
Mimicking biological functionality with polymers for biomedical applications
Jordan J. Green et al.
NATURE (2016)
Preparation of polypyrrole-embedded electrospun poly(lactic acid) nanofibrous scaffolds for nerve tissue engineering
Jun-feng Zhou et al.
NEURAL REGENERATION RESEARCH (2016)
Advancing biomaterials of human origin for tissue engineering
Fa-Ming Chen et al.
PROGRESS IN POLYMER SCIENCE (2016)
Phosphoketolase pathway engineering for carbon-efficient biocatalysis
Calvin Andrew Henard et al.
CURRENT OPINION IN BIOTECHNOLOGY (2015)
Enhanced Bioactivity of Osteoblast-like Cells on Poly(lactic acid)/Poly(methyl methacrylate)/Nano-hydroxyapatite Scaffolds for Bone Tissue Engineering
Zhicheng Rong et al.
FIBERS AND POLYMERS (2015)
Biopolymers and supramolecular polymers as biomaterials for biomedical applications
Ronit Freeman et al.
MRS BULLETIN (2015)
A study on properties of PLA/PBAT from blown film process
P. Hongdilokkul et al.
2015 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM2015) (2015)
Major Role of NAD-Dependent Lactate Dehydrogenases in the Production of L-Lactic Acid with High Optical Purity by the Thermophile Bacillus coagulans
Limin Wang et al.
APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2014)
Heparin functionalized polyaspartamide/polyester scaffold for potential blood vessel regeneration
Giovanna Pitarresi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
A comparison of polymer and polymer-hydroxyapatite composite tissue engineered scaffolds for use in bone regeneration. An in vitro and in vivo study
E. Tayton et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Development and evaluation of axially aligned nanofibres for blood vessel tissue engineering
Krishna Kumar Sankaran et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2014)
Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds
Tiziano Serra et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering
T. Patricio et al.
RAPID PROTOTYPING JOURNAL (2014)
Preparation of tissue engineering porous scaffold with poly(lactic acid) and polyethylene glycol solution blend by solvent-casting/particulate-leaching
Ran Huang et al.
MATERIALS RESEARCH EXPRESS (2014)
PLA-PEG-PLA and Its Electroactive Tetraaniline Copolymer as Multi-interactive Injectable Hydrogels for Tissue Engineering
Haitao Cui et al.
BIOMACROMOLECULES (2013)
Recent advances in lactic acid production by microbial fermentation processes
Mohamed Ali Abdel-Rahman et al.
BIOTECHNOLOGY ADVANCES (2013)
Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering
Abdalla Abdal-haya et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2013)
Potential of industrial biotechnology with cyanobacteria and eukaryotic microalgae
Rene H. Wijffels et al.
CURRENT OPINION IN BIOTECHNOLOGY (2013)
PLGA/PEG-hydrogel composite scaffolds with controllable mechanical properties
Cheryl V. Rahman et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Homofermentative production of optically pure L-lactic acid from xylose by genetically engineered Escherichia coli B
Jinfang Zhao et al.
MICROBIAL CELL FACTORIES (2013)
Production of L-lactic acid by the yeast Candida sonorensis expressing heterologous bacterial and fungal lactate dehydrogenases
Marja Ilmen et al.
MICROBIAL CELL FACTORIES (2013)
Evolution of lactic acid bacteria in the order Lactobacillales as depicted by analysis of glycolysis and pentose phosphate pathways
Elisa Salvetti et al.
SYSTEMATIC AND APPLIED MICROBIOLOGY (2013)
Lactic acid properties, applications and production: A review
Fabio Andres Castillo Martinez et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2013)
Preparation and cytocompatibility of polylactic acid/hydroxyapatite/graphene oxide nanocomposite fibrous membrane
Ma HaiBin et al.
CHINESE SCIENCE BULLETIN (2012)
Studies of in situ-forming hydrogels by blending PLA-PEG-PLA copolymer with silk fibroin solution
Tianyi Zhong et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2012)
Fabrication of Aligned Poly(Lactic Acid)-Chitosan Nanofibers by Novel Parallel Blade Collector Method for Skin Tissue Engineering
K. T. Shalumon et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2012)
Tissue engineering for neuromuscular disorders of the gastrointestinal tract
Kenneth L. Koch et al.
WORLD JOURNAL OF GASTROENTEROLOGY (2012)
Custom-Made Generation of Three-Dimensional Nonwovens Composed of Polyglycolide or Polylactide for the Cardiovascular Tissue Engineering
Anne Reichardt et al.
JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING (2012)
Enhancing Compatibilizer Function by Controlled Distribution in Hydrophobic Polylactic Acid/Hydrophilic Starch Blends
Long Yu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Induction of Cell Migration In Vitro by an Electrospun PDGF-BB/PLGA/PEG-PLA Nanofibrous Scaffold
Xia Zhao et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2011)
Biomedical Applications of Biodegradable Polymers
Bret D. Ulery et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Tissue Engineering and Regenerative Medicine: History, Progress, and Challenges
Francois Berthiaume et al.
ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 2 (2011)
Development of an lbuprofen-Releasing Biodegradable PLA/PGA Electrospun Scaffold for Tissue Regeneration
Irene Canton et al.
BIOTECHNOLOGY AND BIOENGINEERING (2010)
Rapid prototyped PGA/PLA scaffolds in the reconstruction of mandibular condyle bone defects
Hua Xu et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2010)
In vitro precultivation alleviates post-implantation inflammation and enhances development of tissue-engineered tubular cartilage
Xusong Luo et al.
BIOMEDICAL MATERIALS (2009)
Interconnected porous hydroxyapatite ceramics for bone tissue engineering
Hideki Yoshikawa et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2009)
Preparation of chitosan/PLA blend micro/nanofibers by electrospinning
Jia Xu et al.
MATERIALS LETTERS (2009)
Chitosan and its derivatives for tissue engineering applications
In-Yong Kim et al.
BIOTECHNOLOGY ADVANCES (2008)
Production of lactic acid from renewable materials by Rhizopus fungi
Zhan Ying Zhang et al.
BIOCHEMICAL ENGINEERING JOURNAL (2007)
Current state of the art in myocardial tissue engineering
Marie-Noeelle Giraud et al.
TISSUE ENGINEERING (2007)
Tissue engineering scaffolds for nerve regeneration manufactured by ink-jet technology
Delia Radulescu et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
Biotechnological production of lactic acid integrated with fishmeal wastewater treatment by Rhizopus oryzae
Li Ping Huang et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2007)
Customized PEG-derived copolymers for tissue-engineering applications
Joerg K. Tessmar et al.
MACROMOLECULAR BIOSCIENCE (2007)
Tissue engineering of blood vessel
Wen Jie Zhang et al.
JOURNAL OF CELLULAR AND MOLECULAR MEDICINE (2007)
Synthesis of poly(lactic acid): A review
R Mehta et al.
JOURNAL OF MACROMOLECULAR SCIENCE-POLYMER REVIEWS (2005)
Design of scaffolds for blood vessel tissue engineering using a multi-layering electrospinning technique
CM Vaz et al.
ACTA BIOMATERIALIA (2005)
A new biotechnology for articular cartilage repair: subchondral implantation of a composite of interconnected porous hydroxyapatite, synthetic polymer (PLA-PEG), and bone morphogenetic protein-2 (rhBMP-2)
N Tamai et al.
OSTEOARTHRITIS AND CARTILAGE (2005)
Factors affecting the degradation and drug-release mechanism of poly(lactic acid) and poly[(lactic acid)-co-(glycolic acid)]
F Alexis
POLYMER INTERNATIONAL (2005)
Biotechnological production of lactic acid integrated with potato wastewater treatment by Rhizopus arrhizus
LP Huang et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2003)
Characterization of polylactic acid polyglycolic acid composites for cartilage tissue engineering
JM Moran et al.
TISSUE ENGINEERING (2003)
Current state of cartilage tissue engineering
R Tuli et al.
ARTHRITIS RESEARCH & THERAPY (2003)
Properties of lactic acid based polymers and their correlation with composition
A Södergård et al.
PROGRESS IN POLYMER SCIENCE (2002)
Mannitol production by lactic acid bacteria: a review
HW Wisselink et al.
INTERNATIONAL DAIRY JOURNAL (2002)
A literature review of poly(lactic acid)
D Garlotta
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2001)