A Comparative Study of Polycrystal/Single-Crystal LiNi0.8Co0.1Mn0.1O2 in All-Solid-State Li-Ion Batteries with Halide-Based Electrolyte under Low Stacking Pressure

Composite cathodes consisting of a LiNi0.8Co0.1Mn0.1O2 (NCM) cathode and brittle Li3InCl6 (LIC) solid-state electrolyte (SSE) are assessed for all-solid-state Li-ion battery (ASSLIB) applications under a low stacking pressure (coin-cell configuration: approximate to 2.0 MPa). Herein, an investigation is conducted to understand how the internal particle morphologies of the polycrystal (PC-)/single-crystal (SC-) NCM cathode materials affect the internal cracking within the composite electrodes and thereby electrode performance. Extensive debonding between NCM and LIC takes place even at a very low current density (0.03C) with high voltage (4.4 V), but substantially narrower/shorter debonding gaps are observed for SC-NCM as compared with PC-NCM (wider/lengthier) due to their different particle sizes. High current rates (e.g., 0.1C) bring about greater strain rates in PC-NCM particles, resulting in widespread microcracking along the grain boundaries between primary particles and consequently creating dead zones that are isolated from the ionic and electronic conduction pathways. Although SC-NCM shows microcracking within the agglomerates, individual NCM crystals remain in close contact with the SSEs because of noticeably fewer grains in the agglomerations than in the PC-NCM secondary particles. A low-pressure SC-NCM ASSLIB is demonstrated with good cycle stability comparable with that of a liquid-electrolyte cell even under stressful currents.

Automated summary

Composite cathodes consisting of LiNi0.8Co0.1Mn0.1O2 (NCM) and Li3InCl6 (LIC) are investigated for all-solid-state Li-ion batteries (ASSLIBs). The particle morphologies of NCM cathode materials affect the internal cracking within the composite electrodes and consequently the electrode performance. High current rates result in widespread microcracking in polycrystal NCM particles, while single-crystal NCM particles show fewer grains and better contact with the solid-state electrolytes (SSEs). A low-pressure single-crystal NCM ASSLIB exhibits good cycle stability comparable to liquid-electrolyte cells.