☆ 4.5 Article

Sintered Porous Tellurium Pellet Lithium Battery Electrodes

ENERGY TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Tellurium intervened Fe-N codoped carbon for improved oxygen reduction reaction and high-performance Zn-air batteries

Rui Wang et al.

Summary: This study prepared a sulfurized iron and nitrogen codoped carbon material by using Te nanowires as an in-situ intervening agent. The bonding of Te with Fe increased the N content and the proportion of pyridinic N on the material surface, thereby improving the catalytic performance for oxygen reduction reaction. The assembled Zn-air battery exhibited a maximum power density of 250 mW/cm 2 and excellent rate capability, outperforming Pt/C.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Carbon nanotubes supported oxygen reduction reaction catalysts: role of inner tubes

Tian Tian et al.

Summary: It has been found that carbon nanotubes (CNTs) with 2-7 inner tubes are better supports for developing efficient oxygen reduction reaction (ORR) catalysts. CNTs functionalized with CoPc or supported with Pt nanoparticles (NPs) demonstrated better activity for ORR, proving that CNTs composed of 2-7 concentric tubes are the best supports for developing CNT hybrids for ORR in alkaline condition. This new discovery provides guidance for developing highly efficient catalysts by selecting carbon nanotubes as supports.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2023)

Add to Collection

Article Electrochemistry

Investigating dopants to improve sintered LiMn2O4 spinel electrode electrochemical cycling limitations

Chen Cai et al.

Summary: To increase the energy and power density of batteries, engineering the electrode structure can provide improvements. Sintered electrodes can achieve high areal loadings, but may face electronic and/or ionic transport limitations as loadings and thicknesses increase.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Engineering, Chemical

Chemical redox of lithium-ion solid electroactive material in a packed bed flow reactor

Devanshi Gupta et al.

Summary: This work presents an initial investigation of heterogeneous chemical redox reactions between solid electroactive materials and dissolved redox shuttles in a packed bed reactor configuration. The impact of experimental conditions, such as packed bed height, redox shuttle concentration, solution flow rate, and operating temperature, on the molar conversion of the solid electroactive material in the packed bed is quantified using electroanalytical techniques. The progression of the reaction and its dependence on the different variables explored are discussed in the context of the limiting processes for porous packed aggregates of the solid electroactive material undergoing chemical oxidation.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Universal low-temperature and template-free synthesis of sponge-like porous micron-sized elemental materials for high-performance lithium/ potassium storage

Junlu Zhu et al.

Summary: A universal low-temperature and template-free method was developed for the synthesis of interconnected porous micron-sized elements, which exhibit excellent performance including high reversible capacity, long lifespan, and stable structure. The formation mechanism of porous structure was achieved through H2O2-assisted water bath, making it applicable for energy storage and catalysis, among other fields.

NANO ENERGY (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review

Congcong Dang et al.

Summary: Lithium-oxygen (Li-O-2) battery is a potential candidate for next-generation commercial batteries due to its high theoretical capacity and energy density. However, its practical electrochemical performance faces obstacles such as low discharge capacity, poor rate capability, high overpotential, and unstable cycle lifespan. This review summarizes the recent advances in the design and preparation of cathode materials for Li-O-2 batteries. It discusses the reaction mechanism, component design, structure-property relationship, and attempts to improve the electrochemical properties of Li-O-2 batteries electrode materials.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Simulated discharge overpotential distributions for sintered electrode batteries in rechargeable coin cell form factors

Chen Cai et al.

Summary: Sintered electrode lithium-ion batteries have excellent ion transport performance and are suitable for making thick electrodes. Simulation analysis shows that as the thickness of the battery increases, the main contribution of overpotential shifts from interfacial to ionic, and using a higher conductivity electrolyte can significantly increase the total capacity of the battery at high discharge rates.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Sandwich-like CoMoP2/MoP heterostructures coupling N, P co-doped carbon nanosheets as advanced anodes for high-performance lithium-ion batteries

Yiming Zhang et al.

Summary: This research explores the use of a sandwich-like architecture to design a composite anode material with CoMoP2 and MoP nanoparticles. By using a co-doped N, P carbon matrix and doped micro-lamellated carbon sheets, the lithium ion and electron transport efficiency is improved, and the volume changes of the active material are reduced, enhancing the electrochemical activity of the anode.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Investigations about the influence of different carbon matrixes on the electrochemical performance of Na3V2(PO4)3 cathode material for sodium ion batteries

Xiufang Dong et al.

Summary: This study successfully modified the NASICON-type Na3V2(PO4)(3)(NVP) conductor by introducing carbon-based matrix materials such as reduced graphene oxide, polypyrrole, and carbon nanotubes, improving its sodium storage performance and demonstrating superior electrochemical performance.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Scalable, Next-Generation Thick Electrodes: Opportunities and Challenges

Adam M. Boyce et al.

Summary: Current research is allowing for thicker lithium-ion battery electrodes, which can improve energy density and reduce costs, but challenges such as performance issues, manufacturing challenges, and scalability remain. Pore engineering may provide opportunities to design thicker and better electrodes while ensuring long-term performance and scalability.

ACS NANO (2021)

Add to Collection

Article Electrochemistry

Characterization of the Effect of Cell Design on Li-S Battery Resistance Using Electrochemical Impedance Spectroscopy

Aysegul Kilic et al.

Summary: This study investigated the impact of E/S and C/S ratios on the kinetic and transport resistances in Li-S cells. The results showed that the E/S ratio controls cathode kinetics and Li2S precipitation, while the C/S ratio reflects a balance between electrochemically active surface area and homogeneous S loading in the cathode.

CHEMELECTROCHEM (2021)

Add to Collection

Article Chemistry, Physical

Three-dimensional nanoporous tungsten supported tellurium cathode for Li-Te batteries

Ping Liang et al.

Summary: Nanoporous tungsten synthesized by a facile dealloying strategy was used to accommodate tellurium for Li-Te batteries, resulting in a cathode material with excellent performance. The cathode exhibited high volumetric capacity, good cycling performance, and fast rate capabilities, with reversible transformation observed between lithium and Li2Te during charge-discharge processes. This study highlights the potential of nanoporous metals as promising hosts for tellurium in Li-Te batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Rational design of carbon nanotube architectures for lithium-chalcogen batteries: Advances and perspectives

Lianbo Ma et al.

Summary: Rechargeable Li-chalcogen batteries have high theoretical capacities and are of interest, but face challenges such as volume expansion, dissolution of intermediates, and Li dendrite growth. Carbon nanotubes have been used to address these issues and recent studies on CNT-based architectures are presented and analyzed in detail, discussing design concepts, fabrication methods, electrochemical performance, and future challenges.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Materials design and fundamental understanding of tellurium-based electrochemistry for rechargeable batteries

Yue Zhang et al.

Summary: Rechargeable tellurium (Te)-based batteries are promising energy storage devices with high volumetric energy density, but face challenges in terms of electrochemistry and overall performance. Research focuses on understanding the role of Te structure, carbon host chemistry, electrolytes, and addressing issues like Te pulverization and parasitic effects to achieve reversible Te phase transitions. Additional studies are conducted on novel metal-Te based batteries to compare performance data and explore potential research directions for the future.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Electrochemistry

The role of carbon pore structure in tellurium/carbon cathodes for lithium-tellurium batteries

Yue Zhang et al.

Summary: Utilizing lignin to develop porous carbon as a host for tellurium can improve the performance and cycle life of tellurium electrodes, indicating lignin as a sustainable precursor for developing a unique carbon pore structure in battery applications.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Pore Microstructure Impacts on Lithium Ion Transport and Rate Capability of Thick Sintered Electrodes

Ziyang Nie et al.

Summary: Increasing electrode thickness is one route to improve the energy density of lithium-ion battery cells, but restricted Li+ transport in the electrolyte phase through the porous microstructure of thick electrodes limits high current densities and rates of charge/discharge. This study explores processing routes to mitigate transport restrictions and shows that templating the electrode microstructure can significantly improve electrochemical cell properties, especially in situations where ion transport limitations are the rate-limiting step.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Review Electrochemistry

Highly Conductive Tellurium and Telluride in Energy Storage

Manshu Han et al.

Summary: Enhancing energy/power density of electrochemical energy storage devices is a current hot topic among scientists. Tellurium and telluride-based materials have gained increasing interest in the field due to their high electronic conductivity and superior volumetric capacity. Research is focused on understanding the fundamental properties, synthetic methods, design strategies, and electrochemical performances of these materials for future practical applications.

CHEMELECTROCHEM (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Toward Practical Solid-State Lithium-Sulfur Batteries: Challenges and Perspectives

Saneyuki Ohno et al.

Summary: Solid-state lithium-sulfur batteries offer high energy density and safety benefits by using sulfur as conversion-type material, but challenges include overcoming contact losses caused by volume changes of active materials and complexities in composite materials.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Improving high rate cycling limitations of thick sintered battery electrodes by mitigating molecular transport limitations through modifying electrode microstructure and electrolyte conductivity

Ziyang Nie et al.

Summary: Thicker electrodes can increase energy density, but molecular transport limits the rate of charge/discharge; mitigating transport limitations by increasing electrolyte conductivity and aligning the pores in the electrode microstructure.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tellurium: A High-Volumetric-Capacity Potassium-Ion Battery Electrode Material

Shuai Dong et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Strategies toward High-Loading Lithium-Sulfur Battery

Yin Hu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

A Multidimensional Operando Study Showing the Importance of the Electrode Macrostructure in Lithium Sulfur Batteries

Charl J. Jafta et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Metal-Tellurium Batteries: A Rising Energy Storage System

Ze Chen et al.

SMALL STRUCTURES (2020)

Add to Collection

Article Chemistry, Physical

Probing lithiation and delithiation of thick sintered lithium-ion battery electrodes with neutron imaging

Ziyang Nie et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Thick Electrode Batteries: Principles, Opportunities, and Challenges

Yudi Kuang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Physics, Multidisciplinary

Prediction of 2D Li2X (X=Se, Te) monolayer semiconductors by first principles calculations

Mosayeb Naseri et al.

PHYSICS LETTERS A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Single-particle measurements of electrochemical kinetics in NMC and NCA cathodes for Li-ion batteries

Ping-Chun Tsai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Electrochemistry

Sintered electrode full cells for high energy density lithium-ion batteries

J. Pierce Robinson et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Tellurium-tin based electrodes enabling liquid metal batteries for high specific energy storage applications

Haomiao Li et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Electrochemical deintercalation kinetics of 0.5Li2MnO3•0.5LiNi1/3Mn1/3Co1/3O2 studied by EIS and PITT

Meng Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Multidisciplinary Sciences

Transformation of bulk alloys to oxide nanowires

Danni Lei et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Hierarchical Reduced Graphene Oxide/Tellurium Nanowires: A High-Performance Freestanding Cathode for Li-Te Batteries

Jiarui He et al.

ACS NANO (2016)

Add to Collection

Article Electrochemistry

A lithium-tellurium rechargeable battery with exceptional cycling stability

Toshinari Koketsu et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2016)

Add to Collection

Review Energy & Fuels

Promises and challenges of nanomaterials for lithium-based rechargeable batteries

Yongming Sun et al.

NATURE ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Te/C nanocomposites for Li-Te Secondary Batteries

Jeong-Uk Seo et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Chemistry, Physical

Lithium-tellurium batteries based on tellurium/porous carbon composite

Ying Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Physical

Influence of particle sizes and morphologies on the electrochemical performances of spinel LiMn2O4 cathode materials

Liang Xiao et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Comparison of electrochemical performances of olivine NaFePO4 in sodium-ion batteries and olivine LiFePO4 in lithium-ion batteries

Yujie Zhu et al.

NANOSCALE (2013)

Add to Collection

Article Electrochemistry

Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS

Kun Tang et al.

ELECTROCHIMICA ACTA (2011)

Add to Collection

Article Physics, Applied

FIRST-PRINCIPLES STUDY OF ELECTRONIC STRUCTURE AND GROUND-STATE PROPERTIES OF ALKALI-METAL SELENIDES AND TELLURIDES (M2A) [M: Li, Na, K; A: Se, Te]

R. D. Eithiraj et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2009)

Add to Collection

Article Chemistry, Analytical

Theory of the electrochemical impedance of anomalous diffusion

J Bisquert et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.