4.5 Article

High-speed growth of high-quality polycrystalline diamond films by MPCVD

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Diamond-germanium composite films grown by microwave plasma CVD

Victor Ralchenko et al.

Summary: We report on the growth of novel microcrystalline diamond-germanium composite films on Si substrates using microwave plasma assisted chemical vapor deposition. The structure of the films strongly depends on the deposition temperature, with competing Ge grains and diamond crystallites at lower temperatures, and enhanced diamond growth at higher temperatures. The composite shows optical transmission for wavelengths above 10 mm and exhibits bright optical emission of GeV color centers at 601 nm. The effective coefficient of thermal expansion can be tuned by adjusting the Ge volume fraction, facilitating integration with semiconductor wafers.

CARBON (2022)

Article Materials Science, Ceramics

Fracture mechanics of microcrystalline/nanocrystalline composited multilayer chemical vapor deposition self-standing diamond films

X. Song et al.

Summary: This study observed and compared the fracture behavior of different diamond films and investigated their fracture mechanics. The study found that factors such as diamond crystal structure, intrinsic stress, and surface roughness have an impact on the performance of diamond films.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Multidisciplinary

Nucleation growth mechanism of diamond on 4H-SiC substrate by microwave plasma chemical vapor deposition

Xiufei Hu et al.

Summary: In this study, diamond was deposited on mirror-like polished, grinded, and grooved 4H-SiC substrates using microwave plasma chemical vapor deposition. The effects of different growth time and concentrations of methane in hydrogen on the nucleation process and grain morphology were investigated. It was found that grinding the substrate significantly increased the nucleation density, and the concentration of methane played a crucial role in nucleation density, grain size, and facet development. The transformation from nucleation to continuous film was observed on the side wall of the grooved substrate.

MATERIALS TODAY COMMUNICATIONS (2022)

Article Chemistry, Physical

Growth of Nitrogen Incorporated Ultrananocrystalline Diamond Coating on Graphite by Hot Filament Chemical Vapor Deposition

Daniel Villarreal et al.

Summary: This article presents the results of experiments on growing Nitrogen incorporated ultrananocrystalline diamond (N-UNCD) films on commercial natural graphite (NG)/Cu anodes using a hot chemical vapor deposition (HFCVD) process. The experiments investigated the effects of pressure, filament-substrate distance, and temperature on the growth of N-UNCD films. The findings indicate that specific conditions, such as substrate distance of 3.0 cm and temperature of 575°C, are optimal for successful growth of N-UNCD films. Increasing the process pressure also facilitates the growth of N-UNCD films. The results have significant implications for the development of improved Li-ion batteries.

MATERIALS (2022)

Article Materials Science, Multidisciplinary

Mechanical properties evaluation of diamond films via nanoindentation

Jiaji Xiong et al.

Summary: Diamond film is an ideal coating material for difficult-to-machine materials due to its high hardness and wear resistance. However, accurately evaluating the mechanical properties of diamond films has been a challenge. This study evaluates the mechanical properties of diamond films using nanoindentation and proposes a stricter evaluation standard.

DIAMOND AND RELATED MATERIALS (2022)

Article Materials Science, Multidisciplinary

Synthesis and evaluation of high-performance diamond films with multilayer structure on printed circuit board drills

Chengchuan Wang et al.

Summary: This study focuses on high-performance diamond films to improve the working life of drilling tools and holes quality of products in PCB filled with a large amount of Alumina ceramics. Through erosion and drilling tests, it is found that the four-layer MNMNCD film has the best cutting performance in the new type of PCB drilling.

DIAMOND AND RELATED MATERIALS (2021)

Article Materials Science, Multidisciplinary

Heteroepitaxial growth of diamond films on Y3Al5O12 single crystals

Shulong Zhang et al.

Summary: A new thermal management method for solid-state lasers has been developed by depositing diamond films on YAG crystals, which requires sufficient pretreatment and appropriate deposition parameters. This technique effectively improves the thermal conductivity of materials without significantly affecting their optical properties, providing a new option for thermal management of solid-state lasers.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Materials Science, Multidisciplinary

Coupling effects of methane concentration and nitrogen addition level on morphologies and properties of MPCVD diamond films on WC-Co substrates

Xin Song et al.

Summary: This study demonstrates the coupling effects of methane/hydrogen ratio and nitrogen flow rate on the morphologies, mechanical properties, and tribology behaviors of diamond films. Increasing nitrogen flow rate at lower methane ratios changes the diamond film orientation, while further increases in methane and nitrogen lead to the formation of nanocrystalline diamond.

DIAMOND AND RELATED MATERIALS (2021)

Review Chemistry, Multidisciplinary

Ultrathin Diamond Nanofilms-Development, Challenges, and Applications

Stephan Handschuh-Wang et al.

Summary: Diamond is widely used in various fields due to its favorable properties, and the development of conductive diamond coatings has driven progress in thin film technology. Thin diamond coatings, with their high optical transparency, semi-conductivity, and mechanical robustness, have promising applications in solar cells and optical devices.

SMALL (2021)

Article Materials Science, Coatings & Films

Synthesis of diamond films on W mono-blocks by MWCVD for modification of fusion materials

Chuanwen Geng et al.

Summary: The study demonstrates the simultaneous deposition of diamond films on two W mono-blocks using the MWCVD method, with excellent adhesion achieved through substrate pretreatment with WC particles. The deposited films exhibit pure diamond phase based on Raman and XRD spectra, providing an improvement in properties for plasma facing materials under specific conditions.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Coatings & Films

Growth rate and surface free energy of diamond films using different gas-sources

S. Tian et al.

SURFACE ENGINEERING (2020)

Article Materials Science, Coatings & Films

(100) oriented diamond film prepared on amorphous carbon buffer layer containing nano-crystalline diamond grains

Yunxiang Lu et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Engineering, Manufacturing

High-Temperature Thermal Conductivity and Thermal Cycling Behavior of Cu-B/Diamond Composites

Guang-Zhu Bai et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Deposition of large area uniform diamond films by microwave plasma CVD

J. Weng et al.

VACUUM (2018)

Article Materials Science, Multidisciplinary

Monitoring texture formation during diamond growth by specular and diffuse reflectance interferometry

Colin Delfaure et al.

DIAMOND AND RELATED MATERIALS (2016)

Article Materials Science, Multidisciplinary

Comparisons of HFCVD diamond nucleation and growth using different carbon sources

Xinchang Wang et al.

DIAMOND AND RELATED MATERIALS (2015)

Article Materials Science, Multidisciplinary

Electrical activity of (100) n-type diamond with full donor site incorporation of phosphorus

Marie-Amandine Pinault-Thaury et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2015)

Article Materials Science, Multidisciplinary

Diamond electron emission

I-Nan Lin et al.

MRS BULLETIN (2014)

Article Materials Science, Multidisciplinary

Growth of in situ multilayer diamond films by varying substrate-filament distance in hot-filament chemical vapor deposition

Mubarak Ali et al.

JOURNAL OF MATERIALS RESEARCH (2012)

Article Materials Science, Multidisciplinary

Effects of N-2 addition on nanocrystalline diamond films by HFCVD in Ar/CH4 gas mixture

Sobia Allah Rakha et al.

CURRENT APPLIED PHYSICS (2010)

Article Materials Science, Multidisciplinary

High quality, large surface area, homoepitaxial MPACVD diamond growth

F. Silva et al.

DIAMOND AND RELATED MATERIALS (2009)

Article Materials Science, Multidisciplinary

Diamond films with preferred <110> texture by hot filament CVD at low pressure

Shumin Yang et al.

DIAMOND AND RELATED MATERIALS (2008)

Article Materials Science, Multidisciplinary

High rate growth and electrical/optical properties of high-quality homoepitaxial diamond(100) films

T Teraji et al.

DIAMOND AND RELATED MATERIALS (2005)