4.5 Article

Sustainable and Practical Superhydrophobic Surfaces via Mechanochemical Grafting

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Self-Healing of Biocompatible Superhydrophobic Coatings: The Interplay of the Size and Loading of Particles

Nusret Celik et al.

Summary: A fluorine-free and biocompatible superhydrophobic coating, composed of silica nanoparticles and carnauba wax, has been developed for thermal healing after abrasion. The rapid self-healing ability of the coating is attributed to the low melting point of carnauba wax and its migration to the surface of hydrophilic silica nanoparticles. The coating not only exhibits fast self-healing, increased water repellency, and thermal stability after healing, but also shows high levels of biocompatibility.

LANGMUIR (2023)

Article Engineering, Environmental

Antifouling superhydrophobic surfaces with bactericidal and SERS activity

Furkan Sahin et al.

Summary: The multifunctional superhydrophobic surface exhibits unique SERS activity and antimicrobial properties, allowing for liquid repellency, adulterant detection, and reduced bacterial adhesion. Additionally, the surface shows anti-fouling behavior against liquid food and excellent resistance to sticky foods.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Food Science & Technology

Superhydrophobic coatings for food packaging applications: A review

Mahmut Ruzi et al.

Summary: Food waste is a pressing issue in our society, and superhydrophobic coatings offer a promising solution to reduce it. These advanced packaging techniques can prevent food contamination, minimize residual food, and enhance consumer experience.

FOOD PACKAGING AND SHELF LIFE (2022)

Article Chemistry, Multidisciplinary

3D Printing of Superhydrophobic Objects with Bulk Nanostructure

Zheqin Dong et al.

Summary: The rapid development of 3D printing technologies requires new materials with novel properties, such as superhydrophobic materials. A new method for 3D printing superhydrophobic macroscopic objects with bulk nanostructures has been developed, utilizing a specific ink composed of hydrophobic monomers and porogen solvents. Experimental results show that these 3D-printed objects can maintain their superhydrophobicity even after wear damage.

ADVANCED MATERIALS (2021)

Article Nanoscience & Nanotechnology

Solvent-Free Fabrication of Robust Superhydrophobic Powder Coatings

Jinbao Huang et al.

Summary: A novel solvent-free, chemical modification-free, and mechanically, chemically, and UV robust superhydrophobic powder coating has been developed with the capability to adjust hydrophobicity. The coating exhibits remarkable mechanical stability, resistance to chemical corrosion and UV irradiation, as well as anti-abrasion and self-cleaning properties, making it promising for outdoor applications. This study contributes to the environmentally friendly preparation of robust superhydrophobic surfaces.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

Durable superhydrophobic PVDF/FEVE/GO@TiO2 composite coating with excellent anti-scaling and UV resistance properties

Zhanjian Liu et al.

Summary: A robust superhydrophobic PVDF/FEVE/GO@TiO2 composite coating with high water contact angle and low sliding angle was successfully fabricated, showing excellent mechanical durability and chemical stability. The coating can maintain stability under strong acidic and alkaline conditions and inhibit the formation of CaCO3 scale.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Analytical

Simple-to-Operate Approach for Single Cell Analysis Using a Hydrophobic Surface and Nanosized Droplets

Meysam Rezaei et al.

Summary: As microfluidics-based technologies for single-cell analysis advance, a low-cost and reproducible method for rare single-cell analysis has become increasingly important. This method allows for rapid and efficient on-chip single-cell lysis and genetic material collection, enabling precise isolation of single cancer cells with high purity for subsequent RNA analysis. This highly controlled isolation method opens new avenues for studying subcellular functional mechanisms and identifying rare cells with potential functional or pathogenic consequences.

ANALYTICAL CHEMISTRY (2021)

Article Chemistry, Physical

The Mechanism of Surface-Radical Generation and Amorphization of Crystalline Quartz Sand upon Mechanochemical Grinding

Kapish Gobindlal et al.

Summary: Structural and morphological changes during mechanochemical grinding of quartz sand were characterized using various analytical techniques. Surface area increased rapidly during the initial 60 minutes of grinding but did not lead to formation of mechanoradicals. Instead, a significant increase in species levels was observed after an initial lag phase. Analysis over 600 minutes revealed matrix amorphization.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Engineering, Environmental

Hot spot generation, reactivity, and decay in mechanochemical reactors

Andrew W. Tricker et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Nanoscience & Nanotechnology

Corrosion of One-Step Superhydrophobic Stainless-Steel Thermal Spray Coatings

Samantha Michelle Gateman et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Elastic Superhydrophobic and Photocatalytic Active Films Used as Blood Repellent Dressing

Jie Liu et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

When and how self-cleaning of superhydrophobic surfaces works

Florian Geyer et al.

SCIENCE ADVANCES (2020)

Article Nanoscience & Nanotechnology

One-Step Eco-Friendly Superhydrophobic Coating Method Using Polydimethylsiloxane and Ammonium Bicarbonate

Seongmin Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Multidisciplinary Sciences

Design of robust superhydrophobic surfaces

Dehui Wang et al.

NATURE (2020)

Article Chemistry, Multidisciplinary

Superhydrophobic Modification on Starch Film Using PDMS and Ball-Milled MMT Coating

Ying Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Engineering, Manufacturing

Fabrication of superhydrophobic 3D objects by Digital Light Processing

Gurpreet Kaur et al.

ADDITIVE MANUFACTURING (2020)

Article Chemistry, Multidisciplinary

Degradable dual superlyophobic lignocellulosic fibers for high-efficiency oil/water separation

Lei Kang et al.

GREEN CHEMISTRY (2020)

Article Chemistry, Physical

A facile method for fabricating robust cellulose nanocrystal/SiO2 superhydrophobic coatings

Jingda Huang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Chemistry, Physical

Anisotropic Hydrolysis Susceptibility in Deformed Polydimethylsiloxanes

Matthew P. Kroonblawd et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2019)

Article Polymer Science

The morphological changes upon cryomilling of cellulose and concurrent generation of mechanoradicals

Ozge Lacin et al.

POLYMER DEGRADATION AND STABILITY (2019)

Article Chemistry, Multidisciplinary

Fabrication of Impact-Resistant and Wear-Recoverable Superhydrophobic Surfaces

Chao-Hua Xue et al.

ACS OMEGA (2019)

Review Environmental Sciences

A review of the pathways of human exposure to poly- and perfluoroalkyl substances (PFASs) and present understanding of health effects

Elsie M. Sunderland et al.

JOURNAL OF EXPOSURE SCIENCE AND ENVIRONMENTAL EPIDEMIOLOGY (2019)

Article Nanoscience & Nanotechnology

Environmentally Benign Production of Stretchable and Robust Superhydrophobic Silicone Monoliths

Alexander Davis et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Ceramics

Study of short range structure of amorphous Silica from PDF using Ag radiation in laboratory XRD system, RAMAN and NEXAFS

Ripan K. Biswas et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Article Chemistry, Physical

Ball Milling of Silica-Based Pyroclastic Scoriae: Measurement of Mechanochemical Reactivity by Radical Scavenging

Ombretta Cocco et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Article Chemistry, Multidisciplinary

Mechanochemistry: A Force of Synthesis

Jean-Louis Do et al.

ACS CENTRAL SCIENCE (2017)

Article Nanoscience & Nanotechnology

Facile Design and Fabrication of Superwetting Surfaces with Excellent Wear-Resistance

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Stable Hydrophobic Metal-Oxide Photocatalysts via Grafting Polydimethylsiloxane Brush

Sanghyuk Wooh et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

Robust Superhydrophobic Foam: A Graphdiyne-Based Hierarchical Architecture for Oil/Water Separation

Xin Gao et al.

ADVANCED MATERIALS (2016)

Article Nanoscience & Nanotechnology

Durable Superhydrophobic Surfaces via Spontaneous Wrinkling of Teflon AF

Liam R. J. Scarratt et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Nanoscience & Nanotechnology

Ultra-Durable and Transparent Self-Cleaning Surfaces by Large-Scale Self-Assembly of Hierarchical Interpenetrated Polymer Networks

William S. Y. Wong et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Robust Anti-Icing Performance of a Flexible Superhydrophobic Surface

Lei Wang et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Thermal Processing of Silicones for Green, Scalable, and Healable Superhydrophobic Coatings

Xinchun Tian et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

CHEM21 selection guide of classical- and less classical-solvents

Denis Prat et al.

GREEN CHEMISTRY (2016)

Article Nanoscience & Nanotechnology

Mechanically Robust Superhydrophobic Steel Surface with Anti-Icing, UV-Durability, and Corrosion Resistance Properties

Nan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Nanoscience & Nanotechnology

Robust Superhydrophobic Graphene-Based Composite Coatings with Self-Cleaning and Corrosion Barrier Properties

Md J. Nine et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Review Chemistry, Multidisciplinary

Mechanical milling as a technology to produce structural and functional bio-nanocomposites

Giuliana Gorrasi et al.

GREEN CHEMISTRY (2015)

Article Materials Science, Multidisciplinary

Water jet resistant superhydrophobic carbonaceous films by flame synthesis and tribocharging

Ilker S. Bayer et al.

MATERIALS TODAY COMMUNICATIONS (2015)

Article Chemistry, Multidisciplinary

Mechanoradicals Created in Polymeric Sponges Drive Reactions in Aqueous Media

H. Tarik Baytekin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Article Chemistry, Physical

Study of PDMS conformation in PDMS-based hybrid materials prepared by gamma irradiation

J. J. H. Lancastre et al.

RADIATION PHYSICS AND CHEMISTRY (2012)

Article Multidisciplinary Sciences

Hygro-responsive membranes for effective oil-water separation

Arun K. Kota et al.

NATURE COMMUNICATIONS (2012)

Article Chemistry, Physical

Mechanochemically conjugated PMHS/nano-SiO2 hybrid and subsequent optimum grafting density study

Jinbin Lin et al.

APPLIED SURFACE SCIENCE (2011)

Article Chemistry, Multidisciplinary

Rediscovering Silicones: Unreactive Silicones React with Inorganic Surfaces

Joseph W. Krumpfer et al.

LANGMUIR (2011)

Review Materials Science, Multidisciplinary

Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction

Bharat Bhushan et al.

PROGRESS IN MATERIALS SCIENCE (2011)

Article Chemistry, Multidisciplinary

Wetting 101°

Lichao Gao et al.

LANGMUIR (2009)

Article Chemistry, Multidisciplinary

Mechanochemical synthesis of blue luminescent alkyl/alkenyl-passivated silicon nanoparticles

Andrew S. Heintz et al.

ADVANCED MATERIALS (2007)

Review Chemistry, Multidisciplinary

Mechanochemistry: The mechanical activation of covalent bonds

MK Beyer et al.

CHEMICAL REVIEWS (2005)

Article Chemistry, Multidisciplinary

Stable superhydrophobic coatings from polyelectrolyte multilayers

L Zhai et al.

NANO LETTERS (2004)

Article Chemistry, Physical

Superhydrophobic states

A Lafuma et al.

NATURE MATERIALS (2003)

Article Chemistry, Multidisciplinary

OH surface density of SiO2 and TiO2 by thermogravimetric analysis

R Mueller et al.

LANGMUIR (2003)