☆ 4.5 Article

Advances in Designing 3D-Printed Systems for CO2 Reduction

ADVANCED MATERIALS INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

3D-printed NiFe-layered double hydroxide pyramid electrodes for enhanced electrocatalytic oxygen evolution reaction

Jinhyuck Ahn et al.

Summary: This study presents an effective strategy for the fabrication of highly active three-dimensional (3D)-printed NiFe-layered double hydroxide (LDH) pyramid electrode for oxygen evolution reaction (OER). The 3D-printed NiFe-LDH pyramid electrode shows improved OER activity and durability compared to traditional electrodes.

SCIENTIFIC REPORTS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Direct ink writing of 2D material-based supercapacitors

Xiaocong Tian

Summary: This review systematically presents the recent progress in direct ink writing (DIW) of two-dimensional (2D) materials for supercapacitor applications. The basic DIW processes, key scientific/technical points, and corresponding strategies are highlighted, along with discussions on ink fabrication and optimization based on 2D materials.

2D MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

Add to Collection

Review Engineering, Environmental

Recent advances in 3D printing for catalytic applications

Jie Zhu et al.

Summary: Three-dimensional (3D) printing is revolutionizing the design and manufacturing of 3D objects by transforming digital models into solid models. In the field of catalysis, 3D printing technology offers new possibilities and is widely applied in related catalytic reactions and processes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Photo-Responsive Doped 3D-Printed Copper Electrodes for Water Splitting: Refractory One-Pot Doping Dramatically Enhances the Performance

Christian Iffelsberger et al.

Summary: The researchers successfully doped FDM-printed copper electrodes with metal oxide crystals, resulting in significantly enhanced photoelectrochemical properties. They also used scanning photoelectrochemical microscopy to analyze the spatial activity of electrochemical and photoelectrochemical reactions.

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-field driven hybrid catalysts for CO2 reduction: Progress, mechanism and perspective

Yushuai Xu et al.

Summary: Light, heat, and electricity are the main energy sources driving chemical reactions. However, there are significant challenges in terms of energy cost and production efficiency when reducing CO2. Hybrid catalysts driven by multiple physical fields have been developed to transform CO2 into valuable chemicals and achieve net reduction. This study clarifies the correlations among different tuning fields and classifies them into photo-, thermal-, or electric-dominant catalysis.

MATERIALS TODAY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

2D MoS2/carbon/polylactic acid filament for 3D printing: Photo and electrochemical energy conversion and storage

Kalyan Ghosh et al.

Summary: This study successfully fabricated an electrocatalytically active filament using fused deposition modeling (FDM) 3D printing technology, and optimized its composition to achieve a filament with good flexibility and conductivity. The functionality of the printed electrodes was demonstrated in energy conversion and storage applications.

APPLIED MATERIALS TODAY (2022)

Add to Collection

Article Chemistry, Analytical

Using multi-material fused deposition modeling (FDM) for one-step 3D printing of microfluidic capillary electrophoresis with integrated electrodes for capacitively coupled contactless conductivity detection

Reverson Fernandes Quero et al.

Summary: In this study, the FDM 3D printing method was utilized for the first time to fabricate a microchip capillary electrophoresis (MCE) with integrated electrodes for capacitively coupled contactless conductivity detection. By optimizing the printing parameters, a device with optimized electrode distance and excitation signal frequency was successfully fabricated, achieving efficient separation and detection of a mixture.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Functional metal-based 3D-printed electronics engineering: Tunability and bio-recognition

Jose Munoz et al.

Summary: This study presents a straightforward and cost-effective method for manufacturing functional metal-based 3D-printed electronics by replacing copper-based 3D-printed electrodes with noble metal electrodes through galvanic exchange. The method has been successfully applied to two bio-electroanalytical approaches, achieving enhanced performances compared to the original material.

APPLIED MATERIALS TODAY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Tailoring 3D-Printed Electrodes for Enhanced Water Splitting

Raul A. Marquez et al.

Summary: This study investigates the impact of electrode and surface design on the performance of water electrolysis by modifying extrinsic electrode properties and studying bubble release effects. Robust and cost-effective electrodes are fabricated through 3D printing and metal deposition. The results demonstrate that modifying electrode geometry, size, and electrolyte flow rate can decrease overpotential and result in different bubble diameters and lifetimes. The suitability and stability of ordered, Ni-coated 3D porous structures are also confirmed. Additionally, this study demonstrates the effectiveness of 3D-printed electrodes for testing electrocatalytic materials while extrinsic properties are controlled.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Chemical

Electrical swing adsorption on 3D-printed activated carbon monoliths for CO2 capture from biogas

Brieuc Verougstraete et al.

Summary: This study demonstrates the use of an electrically conductive activated carbon monolith for biogas upgrading. The results show that increasing the voltage, using a higher purge flow rate for a shorter time, and adding a rinse step can improve the purity and regeneration efficiency.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Grafting of Pd on Covalently and Noncovalently Modified N-Doped Graphene for Electrocatalysis

Kandambath Padinjareveetil Akshay Kumar et al.

Summary: In this study, a new electrocatalyst was designed by immobilizing palladium nanoparticles on nitrogen-doped reduced graphene oxide to enhance the catalytic activity for hydrogen evolution reaction (HER). The results showed that the covalently modified nitrogen-doped carbon with anchored palladium exhibited better electrocatalytic performance.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions

Swetha Chandrasekaran et al.

ACS MATERIALS AU (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Sustainable and safer nanoclay composites for multifaceted applications

Vinod V. T. Padil et al.

Summary: Nanoclays, a type of layered nanomaterial, have gained importance due to their abundance, low cost, and diverse properties. Adding an appropriate amount of clay to polymer composites can improve their crucial properties and extend their applications. This review outlines the applications and future possibilities of nanoclays in various fields.

GREEN CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Nanocarbon Frameworks for Li-Ion Battery Cathodes

Wanli Gao et al.

Summary: A novel surface engineering method is proposed in this study to enhance the electrochemical activity of 3D-printed carbon materials by incorporating conductive poly(ortho-phenylenediamine) (PoPD). Experimental results demonstrate that this method can fabricate battery cathode materials with excellent discharge performance and cycling stability.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printable Fluoropolymer Gas Diffusion Layers for CO2 Electroreduction

Joshua Wicks et al.

Summary: The rational design of gas diffusion electrode assemblies is crucial for selective and high-rate CO2 conversion to value-added multicarbon products. The study found that the microporosity and structure of gas diffusion layers can significantly affect the product distributions of catalysts operating at high current densities, with surface morphology design leading to a 100x increase in the C2H4:CO ratio and a pyramidal macrostructure causing a 1.8x increase in the C2H4 partial current density. These findings suggest new routes for improving CO2 reduction GDEs as a platform for 3D catalyst design.

ADVANCED MATERIALS (2021)

Add to Collection

Article Electrochemistry

Dip-coating of MXene and transition metal dichalcogenides on 3D-printed nanocarbon electrodes for the hydrogen evolution reaction

K. P. Akshay Kumar et al.

Summary: This study demonstrates a simple and cost-effective method to improve the catalytic properties of 3D-printed nanocarbon electrodes for energy conversion applications by using a dip-coating technique with catalytically active materials.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon-Supported Single Metal Site Catalysts for Electrochemical CO2 Reduction to CO and Beyond

Yuanzhi Zhu et al.

Summary: This passage describes the application of carbon-supported single-atom catalysts in the electrochemical CO2 reduction reaction, and summarizes research progress on synthesis methods, intrinsic activity differences of metal centers, and strategies for enhancing activity.

SMALL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

3D-printing of adsorbents for increased productivity in carbon capture applications (3D-CAPS)

S. N. Sluijter et al.

Summary: The 3D-CAPS project focuses on increasing the productivity of CO2 capture technologies through 3D-printing, aiming to reduce the size of adsorbers and associated costs. The project involves research on improving adsorption capacity, reducing pressure drop, and enhancing mass transfer as key elements of productivity improvement.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2021)

Add to Collection

Article Electrochemistry

Electrocatalytic activity of layered MAX phases for the hydrogen evolution reaction

K. P. Akshay Kumar et al.

Summary: The study investigates the electrocatalytic activity of MAX phases as catalysts for the hydrogen evolution reaction (HER), finding that double transition-metal MAX carbides exhibit better catalytic performance than single transition-metal MAX carbides.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printing to Mitigate COVID-19 Pandemic

Kandambath Padinjareveetil Akshay Kumar et al.

Summary: During the recent COVID-19 pandemic, 3D-printing technology played a crucial role in providing various medical supplies, including personal protection equipment and ventilators, to help protect lives. The use of 3D-printing in emergencies offers significant advantages over traditional methods and opens up enormous possibilities for future development. Collaboration between individuals, entrepreneurs, academics, and companies in forming a global network for delivering 3D-printed medical/non-medical components highlights new and significant opportunities for the future.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

Shane Lawson et al.

Summary: Porous solids as adsorbents and catalysts are essential in industrial processes, and structuring them is crucial for scaling up. Additive manufacturing, such as 3D printing, is a valuable tool for shaping porous materials and fabricating scalable configurations, addressing issues with traditional setups.

CHEMICAL REVIEWS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Electrochemical Reduction of CO2 to CO over Transition Metal/N-Doped Carbon Catalysts: The Active Sites and Reaction Mechanism

Shuyu Liang et al.

Summary: Electrochemical CO2 reduction to CO using transition metal/N-doped carbon catalysts, especially Ni and Fe-N-C, shows great potential for large-scale production. The regulation of active sites in the catalysts can adjust the electrocatalytic performance for CO2 reduction.

ADVANCED SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing

Edurne Redondo et al.

Summary: 3D printing of metallic electrodes offers advantages such as robustness and electrocatalytic surfaces at a low cost. The physical and electrochemical properties of 3D printed copper electrodes were characterized using various techniques, and their electrochemical performance for non-enzymatic sensing of glucose was evaluated, demonstrating wide applicability.

APPLIED MATERIALS TODAY (2021)

Add to Collection

Article Electrochemistry

Electrochemical Reduction of Carbon Dioxide on 3D Printed Electrodes

Eva Vaneckova et al.

Summary: This study utilized 3D printing to manufacture catalysts for the electrochemical reduction of CO2 with promising results. Functionalized carbon nanotube-based electrodes printed by fused deposition modeling demonstrated performance characteristics approaching those of planar interfaces. The activity of the catalysts was inspected by monitoring the concentration of formate ions in the saturated CO2 solution, showing comparable efficiency to conventionally prepared micro-structured copper catalysts.

CHEMELECTROCHEM (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchically Porous CuAg via 3D Printing/Dealloying for Tunable CO2 Reduction to Syngas

Wen-Yuan Yan et al.

Summary: In this study, a three-dimensional hierarchical porous CuAg catalyst was developed using metal 3D printing and dealloying techniques, which achieved tunable H-2/CO ratio for simultaneous CO and H-2 generation with significantly enhanced syngas production rate and electrochemical stability. The hierarchical porous structure of the catalyst played a key role in improving gas bubble growth, stabilizing active layers, and enabling efficient mass transfer, offering a new approach for the development of hierarchically porous catalysts for CO2 reduction.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Versatile Design of Functional Organic-Inorganic 3D-Printed (Opto)Electronic Interfaces with Custom Catalytic Activity

Jose Munoz et al.

Summary: The paper presents a simple, universal, and robust method to tailor the capabilities of 3D-printed nanocomposite carbon/polymer electrode surfaces by using functional inorganic nanoparticles, thus enhancing the electrochemical performance of 3D-printed electronic interfaces in various areas.

SMALL (2021)

Add to Collection

Article Multidisciplinary Sciences

Stable, active CO2 reduction to formate via redox-modulated stabilization of active sites

Le Li et al.

Summary: Alloying p-block elements with different electronegativities can modulate the redox potential of active sites in CO2 electrochemical reduction, leading to enhanced formic acid production and stability. Experimental findings demonstrate that stabilized Sn-Bi/SnO2 surfaces exhibit excellent Faradaic efficiency and overpotential.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Atomic layer deposition of electrocatalytic layer of MoS2 onto metal-based 3D-printed electrode toward tailoring hydrogen evolution efficiency

Veronika Urbanova et al.

Summary: Molybdenum disulfide, a representative material of transition metal dichalcogenides, is considered an attractive electrocatalyst for sustainable energy conversion and storage applications due to its highly structure-dependent properties. This study utilized atomic layer deposition to deposit MoS2 onto 3D-printed metallic electrodes for hydrogen evolution reaction, showing that the number of pulses in the ALD process significantly impacts the performance by altering the thickness and roughness of MoS2 films. This deposition technique has the potential to prepare well-defined materials suitable for energy conversion applications.

APPLIED MATERIALS TODAY (2021)

Add to Collection

Review Chemistry, Physical

Progress and Challenges of Carbon Dioxide Reduction Reaction on Transition Metal Based Electrocatalysts

Denis Johnson et al.

Summary: This review presents the latest research progress in utilizing non-precious transition metal catalysts for CO2 reduction reaction (CO2RR), focusing on design, synthesis, characterization, and mechanisms, with a particular emphasis on advanced catalysts design incorporating 2D transition metal carbide and nitride materials, as well as state-of-the-art in situ/operando spectroelectrochemical techniques. The review also highlights the remaining grand challenges in the field and provides outlooks for future research and opportunities.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Electrocatalytic Reactions for Converting CO2 to Value-Added Products

Yueli Quan et al.

Summary: This article discusses the recent progress in converting CO2 into valuable chemical products, focusing on direct electrochemical CO2 reduction reactions and coupled reactions. Despite challenges in CO2RR, there are vast potential prospects for further development in this field.

SMALL SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

An overview of flow cell architecture design and optimization for electrochemical CO2 reduction

Dui Ma et al.

Summary: Converting CO2 into value-added fuels or chemical feedstocks through electrochemical reduction is a promising way to reduce atmospheric carbon dioxide levels and alleviate global warming. While there has been intensive research on developing new electrocatalysts, less attention has been paid to the engineering design of low-cost and large-scale CO2 reduction electrolyzer architectures.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Graphene Materials from the Reduction of CO2

Zhuxing Sun et al.

Summary: The continuous growth of carbon dioxide in the atmosphere threatens the global environment by contributing to the greenhouse effect. Converting CO2 into value-added chemicals is a challenge, but using alkali metal-based exothermic reactions may offer cost-effective solutions for efficient CO2 utilization and 3D graphene production. This approach allows for the production of diverse 3D graphene materials with desirable properties for energy-related and environmental applications by manipulating the reactions between CO2 and alkali metals.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrocatalytic CO2 reduction on earth abundant 2D Mo2C and Ti3C2 MXenes

Nuwan H. Attanayake et al.

Summary: Mo2C and Ti3C2 MXenes show high efficiency as electrocatalysts for the CO2 reduction reaction, with Mo2C exhibiting a faradaic efficiency of 90% and Ti3C2 exhibiting a faradaic efficiency of 65%. The use of an ionic liquid electrolyte suppresses the competing hydrogen evolution reaction, allowing for improved CO2 reduction efficiency.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Physical

Electrochemical reduction of carbon dioxide (CO2): bismuth-based electrocatalysts

Yayu Guan et al.

Summary: This review comprehensively examines the recent development of bismuth-based ERCO2 catalysts, focusing on catalyst material design, synthesis, reaction mechanisms, and performance validation/optimization. Various influencing factors on the catalytic performance are discussed and analyzed, and the main technical challenges and future research directions for Bi-based electrocatalysts are proposed.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Multidisciplinary

3D Printing for Electrochemical Energy Applications

Michelle P. Browne et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Multidisciplinary Sciences

Hierarchically porous Au nanostructures with interconnected channels for efficient mass transport in electrocatalytic CO2 reduction

Gayea Hyun et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Add to Collection

Article Chemistry, Analytical

3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids

Rafael M. Cardoso et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Add to Collection

Review Chemistry, Physical

Mechanistic Understanding of CO2 Reduction Reaction (CO2RR) Toward Multicarbon Products by Heterogeneous Copper-Based Catalysts

Tanya K. Todorova et al.

ACS CATALYSIS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Stability and Degradation Mechanisms of Copper-Based Catalysts for Electrochemical CO2 Reduction

Stefan Popovic et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Methanol steam reforming microreactor with novel 3D-Printed porous stainless steel support as catalyst support

Tianqing Zheng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Modulating the MoS2 Edge Structures by Doping Transition Metals for Electrocatalytic CO2 Reduction

Xinnan Mao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Review Energy & Fuels

CO2 Methanation on Hydrotalcite-Derived Catalysts and Structured Reactors: A Review

Huong Lan Huynh et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Electrochemistry

3D-printed electrodes for the detection of mycotoxins in food

Muhammad Zafir Mohamad Nasir et al.

ELECTROCHEMISTRY COMMUNICATIONS (2020)

Add to Collection

Review Electrochemistry

Accounts in 3D-Printed Electrochemical Sensors: Towards Monitoring of Environmental Pollutants

Jose Munoz et al.

CHEMELECTROCHEM (2020)

Add to Collection

Review Chemistry, Analytical

3D-printed biosensors for electrochemical and optical applications

Jose Munoz et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Interactions between Transition-Metal Surfaces and MoS2 Monolayers: Implications for Hydrogen Evolution and CO2 Reduction Reactions

Avdhoot Datar et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Multidisciplinary Sciences

Metal 3D printing technology for functional integration of catalytic system

Qinhong Wei et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Catalyst coating of 3D printed structures via electrochemical deposition: Case of the transition metal chalcogenide MoSx for hydrogen evolution reaction

Christian Iffelsberger et al.

APPLIED MATERIALS TODAY (2020)

Add to Collection

Editorial Material Multidisciplinary Sciences

A few basic concepts in electrochemical carbon dioxide reduction

Karen Chan

NATURE COMMUNICATIONS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Catalytic conversion of CO2 to chemicals and fuels: the collective thermocatalytic/photocatalytic/electrocatalytic approach with graphitic carbon nitride

Subhajyoti Samanta et al.

MATERIALS ADVANCES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on New 3-D Printed Materials' Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture

Ahmad Soliman et al.

NANOMATERIALS (2020)

Add to Collection

Article Electrochemistry

Metal-plated 3D-printed electrode for electrochemical detection of carbohydrates

K. P. Akshay Kumar et al.

ELECTROCHEMISTRY COMMUNICATIONS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Functional inks and extrusion-based 3D printing of 2D materials: a review of current research and applications

Kamrul Hassan et al.

NANOSCALE (2020)

Add to Collection

Review Chemistry, Physical

Advances and challenges in electrochemical CO2 reduction processes: an engineering and design perspective looking beyond new catalyst materials

Sahil Garg et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Bifunctional nickel and copper electrocatalysts for CO2 reduction and the oxygen evolution reaction

Hanqing Pan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Direct ink writing advances in multi-material structures for a sustainable future

Victoria G. Rocha et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

Graphene-based catalysts for electrochemical carbon dioxide reduction

Amirhossein Hasani et al.

CARBON ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A highly efficient diatomic nickel electrocatalyst for CO2reduction

Meng-Jiao Sun et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Review Chemistry, Physical

An overview of Cu-based heterogeneous electrocatalysts for CO2 reduction

Jian Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Analytical

Comparison of activation processes for 3D printed PLA-graphene electrodes: electrochemical properties and application for sensing of dopamine

Cristiane Kalinke et al.

ANALYST (2020)

Add to Collection

Article Chemistry, Physical

Inherent impurities in 3D-printed electrodes are responsible for catalysis towards water splitting

Michelle P. Browne et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

3D-Printed electrodes for membraneless water electrolysis

Justin C. Bui et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Two-dimensional materials and metal-organic frameworks for the CO2 reduction reaction

Mahider Asmare Tekalgne et al.

MATERIALS TODAY ADVANCES (2020)

Add to Collection

Review Engineering, Biomedical

Photo-curing 3D printing technique and its challenges

Haoyuan Quan et al.

BIOACTIVE MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Electrocatalytic CO2 Reduction to Fuels: Progress and Opportunities

Joaquin Resasco et al.

TRENDS IN CHEMISTRY (2020)

Add to Collection

Review Chemistry, Physical

Developments on carbon dioxide reduction: Their promise, achievements, and challenges

Samuel C. Perry et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene-based materials for electrochemical CO2 reduction

Tao Ma et al.

JOURNAL OF CO2 UTILIZATION (2019)

Add to Collection

Article Chemistry, Applied

Electrical conductive 3D-printed monolith adsorbent for CO2 capture

Maria Joao Regufe et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Chemistry from 3D printed objects

Matthew R. Hartings et al.

NATURE REVIEWS CHEMISTRY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Progress and Perspectives of Electrochemical CO2 Reduction on Copper in Aqueous Electrolyte

Stephanie Nitopi et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Physical

Unraveling Mechanistic Reaction Pathways of the Electrochemical CO2 Reduction on Fe-N-C Single-Site Catalysts

Wen Ju et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Engineering, Chemical

3D Printed Polymer Composites for CO2 Capture

Du Nguyen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Vesna Middelkoop et al.

JOURNAL OF CO2 UTILIZATION (2019)

Add to Collection

Article Engineering, Chemical

Nature inspired fractal tree-like photobioreactor via 3D printing for CO2 capture by microaglae

Luhaibo Zhao et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Scaling up of 3D printed and Ni/Al2O3 coated reactors for CO2 methanation

Simge Danaci et al.

REACTION CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

MoS2 versatile spray-coating of 3D electrodes for the hydrogen evolution reaction

Rui Gusmao et al.

NANOSCALE (2019)

Add to Collection

Review Chemistry, Physical

Supported Single Atoms as New Class of Catalysts for Electrochemical Reduction of Carbon Dioxide

Yi Cheng et al.

SMALL METHODS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Progress and Perspective of Electrocatalytic CO2 Reduction for Renewable Carbonaceous Fuels and Chemicals

Wenjun Zhang et al.

ADVANCED SCIENCE (2018)

Add to Collection

Article Chemistry, Analytical

3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis

C. Lorena Manzanares Palenzuela et al.

ANALYTICAL CHEMISTRY (2018)

Add to Collection

Article Energy & Fuels

Innovative 3D-manufacture of structured copper supports post-coated with catalytic material for CO2 methanation

Simge Danaci et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Add to Collection

Article Engineering, Environmental

Development of 3D-printed polymer-zeolite composite monoliths for gas separation

Harshul Thakkar et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Review Chemistry, Multidisciplinary

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

Cesar Parra-Cabrera et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Applied

3D-printed SAPO-34 monoliths for gas separation

Sarah Couck et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2018)

Add to Collection

Review Multidisciplinary Sciences

Net-zero emissions energy systems

Steven J. Davis et al.

SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

Digitization of multistep organic synthesis in reactionware for on-demand pharmaceuticals

Philip J. Kitson et al.

SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices

ChuanYi Foo et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Chemistry, Physical

Opportunities and Challenges in CO2 Reduction by Gold- and Silver-Based Electrocatalysts: From Bulk Metals to Nanoparticles and Atomically Precise Nanoclusters

Shuo Zhao et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Review Chemistry, Physical

Heteroatom-doped carbon materials and their composites as electrocatalysts for CO2 reduction

Huijuan Cui et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Multidisciplinary Sciences

Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing

Cheng Zhu et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printed Graphene Electrodes' Electrochemical Activation

Michelle P. Browne et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Multimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts

Adriano Ambrosi et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Engineering, Manufacturing

Thermal conductivity of sintered copper samples prepared using 3D printing-compatible polymer composite filaments

Navid Dehdari Ebrahimi et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Review Chemistry, Physical

Defect and Interface Engineering for Aqueous Electrocatalytic CO2 Reduction

Yifei Wang et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting

Adriano Ambrosi et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Review Thermodynamics

Continuous-flow electroreduction of carbon dioxide

B. Endrodi et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)

Add to Collection

Article Environmental Sciences

The role of CO2 capture and utilization in mitigating climate change

Niall Mac Dowell et al.

NATURE CLIMATE CHANGE (2017)

Add to Collection

Review Chemistry, Physical

CO2 reduction: the quest for electrocatalytic materials

Bahareh Khezri et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Fundamentals and Challenges of Electrochemical CO2 Reduction Using Two-Dimensional Materials

Zhenyu Sun et al.

CHEM (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Brass and Bronze as Effective CO2 Reduction Electrocatalysts

Jingfu He et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Understanding of Electrochemical Mechanisms for CO2 Capture and Conversion into Hydrocarbon Fuels in Transition-Metal Carbides (MXenes)

Neng Li et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Three-dimensional Printing for Catalytic Applications: Current Status and Perspectives

Xintong Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Polymers for 3D Printing and Customized Additive Manufacturing

Samuel Clark Ligon et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Formulation of Aminosilica Adsorbents into 3D-Printed Monoliths and Evaluation of Their CO2 Capture Performance

Harshul Thakkar et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Review Chemistry, Physical

Molecular catalysis of electrochemical reactions

Cyrille Costentin et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2017)

Add to Collection

Article Engineering, Environmental

CO2, CH4 and N2 separation with a 3DFD-printed ZSM-5 monolith

Sarah Couck et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Helical 3D-Printed Metal Electrodes as Custom-Shaped 3D Platform for Electrochemical Devices

Adriano Ambrosi et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in Inorganic Heterogeneous Electrocatalysts for Reduction of Carbon Dioxide

Dong Dong Zhu et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Applied

Efficient CO2 methanation over Ni/Al2O3 coated structured catalysts

Simge Danaci et al.

CATALYSIS TODAY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

3D-printing technologies for electrochemical applications

Adriano Ambrosi et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-free Nanoporous Carbon as a Catalyst for Electrochemical Reduction of CO2 to CO and CH4

Wanlu Li et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Engineering, Manufacturing

Fused deposition modelling with ABS-graphene nanocomposites

Sithiprumnea Dul et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical CO2 Reduction to Hydrocarbons on a Heterogeneous Molecular Cu Catalyst in Aqueous Solution

Zhe Weng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Biochemical Research Methods

3D printing of versatile reactionware for chemical synthesis

Philip J. Kitson et al.

NATURE PROTOCOLS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Highly efficient electrochemical reduction of CO2 to CH4 in an ionic liquid using a metal-organic framework cathode

Xinchen Kang et al.

CHEMICAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

A metal-free electrocatalyst for carbon dioxide reduction to multi-carbon hydrocarbons and oxygenates

Jingjie Wu et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Carbon nanotube containing Ag catalyst layers for efficient and selective reduction of carbon dioxide

Sichao Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Achieving Highly Efficient, Selective, and Stable CO2 Reduction on Nitrogen-Doped Carbon Nanotubes

Jingjie Wu et al.

ACS NANO (2015)

Add to Collection

Article Chemistry, Physical

Catalysts and Reaction Pathways for the Electrochemical Reduction of Carbon Dioxide

Ruud Kortlever et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Selective Heterogeneous CO2 Electroreduction to Methanol

Seoin Back et al.

ACS CATALYSIS (2015)

Add to Collection

Article Multidisciplinary Sciences

3D Printable Graphene Composite

Xiaojun Wei et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels

Jinli Qiao et al.

CHEMICAL SOCIETY REVIEWS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Electrocatalytic Conversion of Carbon Dioxide to Methane and Methanol on Transition Metal Surfaces

Kendra P. Kuhl et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Multidisciplinary Sciences

Robust carbon dioxide reduction on molybdenum disulphide edges

Mohammad Asadi et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing for CO2 capture and chemical engineering design

Jason E. Bara et al.

NANOMATERIALS AND ENERGY (2013)

Add to Collection

Article Multidisciplinary Sciences

Global warming preceded by increasing carbon dioxide concentrations during the last deglaciation

Jeremy D. Shakun et al.

NATURE (2012)

Add to Collection

Article Economics

Carbon capture and storage

Jon Gibbins et al.

ENERGY POLICY (2008)

Add to Collection

Review Chemistry, Analytical

A review of the aqueous electrochemical reduction of CO2 to hydrocarbons at copper

M. Gattrell et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2006)

Add to Collection

Review Materials Science, Multidisciplinary

Selective laser sintering: A qualitative and objective approach

S Kumar

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.