Vital Conditions to Remove Pollutants from Synthetic Wastewater Using Malaysian Ganoderma lucidum

Mycoremediation, a fungal-based technology, has seen tremendous growth as an effective alternative to treat industrial wastewater due to its ability to oxidise pollutant loadings. Considering the non-toxic properties and high potential degradation performance of Ganoderma lucidum, this research aims to study the performance of a Malaysian G. lucidum strain, the effect of agitation speed, and different carbon-to-nitrogen (C/N) ratio concentrations of synthetic wastewater in degrading chemical oxygen demand (COD) and ammonia. Different agitation speeds (25 rpm, 50 rpm and 100 rpm) and C/N ratios (C10N1, C13.3N1 and C16.7N1) were chosen as parameters to be analysed in this study. The best degradation of COD and ammonia with a percentage removal in the range of 95% to 100% within 30 h of treatment. ANOVA analysis was done using the response surface methodology to verify the obtained results, and it was found that mycoremediation using 100 rpm agitation provided the best results, removing more than 95% of COD and ammonia from synthetic wastewater. The microscopic analysis also showed that the structure of G. lucidum changed after wastewater treatment. This result proved that the Malaysian G. lucidum strain has a good potential in treating synthetic domestic wastewater, especially with high organic content, as a naturally sustainable bioremediation system.

Automated summary

This research examines the performance of a Malaysian Ganoderma lucidum strain in degrading chemical oxygen demand (COD) and ammonia in synthetic wastewater, as well as the effect of agitation speed and carbon-to-nitrogen (C/N) ratio. The study finds that at an agitation speed of 100 rpm, COD and ammonia can be removed by 95% to 100% within 30 hours. Microscopic analysis confirms structural changes in G. lucidum after wastewater treatment, suggesting its potential in treating synthetic domestic wastewater with high organic content.