☆ 4.6 Review

Scheduling and Controlling Production in an Internet of Things Environment for Industry 4.0: An Analysis and Systematic Review of Scientific Metrological Data

SUSTAINABILITY (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Safety Poka Yoke in Zero-Defect Manufacturing Based on Digital Twins

Zhihan Lv et al.

Summary: This article aims to optimize the fault diagnosis effect of manufacturing equipment and explore the application of digital twins technology in intelligent manufacturing. By adopting equipment failures in Poka Yoke technology, a fault identification and chopping algorithm based on active learning-deep neural network (AL-DNN) and domain adversarial neural networks (DANN) is designed. Additionally, a digital twins workshop management and control system is designed for intelligent manufacturing management. Experimental exploration shows that the accuracy of the AL-DNN algorithm is as high as 99.248% and the DANN algorithm can realize fault identification and diagnosis under different working conditions, with an accuracy improvement of up to 20.256% compared to other deep learning algorithms.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2023)

Add to Collection

Article Automation & Control Systems

Task Co-Offloading for D2D-Assisted Mobile Edge Computing in Industrial Internet of Things

Xingxia Dai et al.

Summary: This article investigates the application of mobile edge computing and device-to-device offloading in the industrial Internet of Things, proposing a co-offloading framework and a learning-based algorithm to address challenges such as mobility, selfishness, and incomplete information.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2023)

Add to Collection

Article Computer Science, Artificial Intelligence

SePiCo: Semantic-Guided Pixel Contrast for Domain Adaptive Semantic Segmentation

Binhui Xie et al.

Summary: Domain adaptive semantic segmentation aims to achieve satisfactory predictions on an unlabeled target domain by utilizing a supervised model trained on a labeled source domain. We propose SePiCo, a novel one-stage adaptation framework that emphasizes the semantic concepts of individual pixels to improve self-training methods.

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Fast Terminal Sliding Mode Current Control With Adaptive Extended State Disturbance Observer for PMSM System

Wenjun Xu et al.

Summary: This article proposes a current decoupling control strategy by combining FTSMC and AESO. The voltage errors and external disturbances caused by d-q-axis current coupling and motor parameter variations are regarded as a lumped disturbance, facilitating the decoupling of d-q-axis currents. The FTSMC strategy is used to track the d-q-axis currents and improve the current dynamic performance, while the AESO method observes and compensates for the lumped disturbance.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2023)

Add to Collection

Article Computer Science, Artificial Intelligence

Variable surrogate model-based particle swarm optimization for high-dimensional expensive problems

Jie Tian et al.

Summary: Due to the curse of dimensionality, applying surrogate-assisted evaluation algorithms (SAEAs) to high-dimensional expensive problems remains challenging. This paper proposes a variable surrogate model-based particle swarm optimization (VSMPSO) and extends it to solve 200-dimensional problems. By constructing a single surrogate model through simple random sampling, different promising areas are explored in different iterations. The variable model management strategy is used to better utilize the current global model and accelerate the convergence rate of the optimizer. Comparisons with state-of-the-art algorithms demonstrate that VSMPSO achieves high-quality solutions and computational efficiency for high-dimensional problems.

COMPLEX & INTELLIGENT SYSTEMS (2023)

Add to Collection

Review Engineering, Mechanical

Lean, green, and smart manufacturing: An ingenious framework for enhancing the sustainability of operations management on the shop floor in industry 4.0

Varun Tripathi et al.

Summary: This study aims to develop a framework for improving operational excellence and sustainability in operations management on the shop floor in an industry 4.0 environment using lean, green, and smart manufacturing concepts. The framework significantly improved productivity, machinery utilization, production time, manufacturing defects, and production cost in the mining machinery manufacturing industry. The researchers believe that this model would benefit industry individuals in enhancing sustainability in operational excellence on the shop floor in an industry 4.0 environment.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2023)

Add to Collection

Article Energy & Fuels

An initialization-free distributed algorithm for dynamic economic dispatch problems in microgrid: Modeling, optimization and analysis

Yuzhu Duan et al.

Summary: This paper proposes a distributed optimization algorithm for a hybrid microgrid network to minimize the total generation cost in a dynamic economic dispatch problem. The algorithm considers the supply-demand balance, capacity, and ramp-rate constraints of the generation facilities, as well as the environmental impact of pollutant emissions. It transforms the multi-objective optimization problem into a single objective optimization problem and proposes a fully distributed algorithm that does not require initialization. The experimental results demonstrate the effectiveness of the algorithm in satisfying the constraints of the supply-demand and capacity inequalities.

SUSTAINABLE ENERGY GRIDS & NETWORKS (2023)

Add to Collection

Review Green & Sustainable Science & Technology

Automobile recycling for remanufacturing in China: A systematic review on recycling legislations, models and methods

Lei Wang et al.

Summary: Compared with recycling scrapped automobile materials, remanufacturing is a more beneficial circular economy model. However, China's scrapped automobiles remanufacturing industry is facing the challenge of low recycling rate. Through reviewing peer-reviewed papers, we identified the challenges and proposed a method system to promote recycling, including classification of recycling models and key methods. This work provides insights at both micro and macro levels for researchers to create an empirical study framework.

SUSTAINABLE PRODUCTION AND CONSUMPTION (2023)

Add to Collection

Article Computer Science, Hardware & Architecture

A Structural Evolution-Based Anomaly Detection Method for Generalized Evolving Social Networks

Huan Wang et al.

Summary: This study proposes a novel structural evolution-based anomaly detection method (SeaDM) for generalized evolving social networks with limited structural information. SeaDM combines an evolutional state construction algorithm and an optimized evolutional observation algorithm to evaluate state change and detect anomalies.

COMPUTER JOURNAL (2022)

Add to Collection

Article Mathematics

A Sustainable Methodology Using Lean and Smart Manufacturing for the Cleaner Production of Shop Floor Management in Industry 4.0

Varun Tripathi et al.

Summary: The present study aims to develop a methodology for cleaner production management using lean and smart manufacturing in Industry 4.0. The results of two case studies show that the developed methodology can achieve a sustainable production system and problem-solving, while enhancing productivity within limited constraints.

MATHEMATICS (2022)

Add to Collection

Review Computer Science, Information Systems

A review of green shop scheduling problem

Mei Li et al.

Summary: The manufacturing industry plays a crucial role in a country's productivity level and economic development, but it also brings about environmental pollution and resource scarcity. Therefore, researching Green Shop Scheduling Problems (GSSPs) has become an important topic, aiming to reduce resource consumption and environmental pollution while achieving economic benefits through behavior control. In the context of Industry 4.0, GSSPs require re-examination and study.

INFORMATION SCIENCES (2022)

Add to Collection

Article Engineering, Industrial

Deep reinforcement learning for dynamic scheduling of a flexible job shop

Renke Liu et al.

Summary: This research proposes a hierarchical and distributed architecture for solving the dynamic flexible job shop scheduling problem. It introduces specialized state and action representations and develops a surrogate reward-shaping technique to improve learning efficiency and scheduling effectiveness. A simulation study validates the performance advantages of the proposed approach.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Dynamic job shop scheduling based on deep reinforcement learning for multi-agent manufacturing systems

Yi Zhang et al.

Summary: This paper proposes a multi-agent manufacturing system based on deep reinforcement learning to address the production planning and control problems caused by personalized orders. The system, with the cooperation and competition among multiple equipment agents and the decision-making module of AI scheduler, efficiently performs task allocation and continuously improves decision-making performance through training and updating.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2022)

Add to Collection

Article Automation & Control Systems

Iterated Greedy Algorithms for Flow-Shop Scheduling Problems: A Tutorial

ZiYan Zhao et al.

Summary: Iterated greedy algorithm (IGA), developed in 2007, is widely used for flow-shop scheduling problems (FSPs) in production scheduling. Various FSPs have been solved using IGA-based methods, including basic IGA, variants, and hybrid algorithms. Over 100 articles related to IGA and FSPs have been published, highlighting the significance and potential of this algorithm in optimization.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

A Sustainable Productive Method for Enhancing Operational Excellence in Shop Floor Management for Industry 4.0 Using Hybrid Integration of Lean and Smart Manufacturing: An Ingenious Case Study

Varun Tripathi et al.

Summary: In industry 4.0, lean and smart manufacturing are implemented to improve shop floor management systems. Various approaches, such as value stream mapping, total productive maintenance, IoT, AI, machine learning, and fuzzy logic, are used. This research aims to develop an open innovation method to achieve sustainability in shop floor management systems in industry 4.0.

SUSTAINABILITY (2022)

Add to Collection

Article Engineering, Chemical

Recent Progression Developments on Process Optimization Approach for Inherent Issues in Production Shop Floor Management for Industry 4.0

Varun Tripathi et al.

Summary: In the current industrial revolution, operations management teams focus on implementing an efficient process optimization approach and suitable strategy to achieve operational excellence in the shop floor. This study investigates strategies used to address problems in shop floor management and suggests understanding operational conditions in the shop floor. The novelty lies in reporting an effective strategy for implementing a process optimization approach that eliminates shop floor management issues.

PROCESSES (2022)

Add to Collection

Article Robotics

Multi-Agent Reinforcement Learning for Real-Time Dynamic Production Scheduling in a Robot Assembly Cell

Dazzle Johnson et al.

Summary: With the rapid shift towards mass personalisation in the industry, there is a clear need for a decentralised multi-agent system capable of dynamic flexible job shop scheduling (FJSP). Traditional scheduling methods cannot achieve satisfactory results and are limited to static environments. Recent Reinforcement Learning (RL) approaches for dynamic FJSP lack flexibility and autonomy. In this study, we propose a Multi-Agent Reinforcement Learning (MARL) system for scheduling assembly jobs in a robot assembly cell, which demonstrates improved performance compared to rule-based heuristic methods.

IEEE ROBOTICS AND AUTOMATION LETTERS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Technical Risk Assessment for the Safe Design of a Man-Rider Chair Lift System

Mohd Ahtesham Hussain Siddiqui et al.

Summary: Underground mining is a challenging field where miners have to walk to the working faces. To alleviate the strain stresses, a man-rider chair lift system has been developed. Through mathematical calculations and simulation analysis, we have proven the feasibility and safety of this system in both the installation and extension phases.

MACHINES (2022)

Add to Collection

Article Construction & Building Technology

The Identification, Development, and Evaluation of BIM-ARDM: A BIM-Based AR Defect Management System for Construction Inspections

Kieran W. May et al.

Summary: This article presents the findings from a three-stage research project on the development and evaluation of a defect management augmented reality prototype that incorporates building information modeling (BIM) technologies. The study involved a workshop with construction-industry representatives, the development of an on-site BIM-based AR defect management system, and a study comparing BIM-ARDM to the current paper-based approach. The findings revealed significant improvements in usability, workload, performance, completion time, defect identification, building element location, and task assistance with BIM-ARDM.

BUILDINGS (2022)

Add to Collection

Article Environmental Studies

How Industry 4.0 technologies and open innovation can improve green innovation performance?

Muhammad Faraz Mubarak et al.

Summary: Industry 4.0 technologies have a positive impact on open innovation, which in turn contributes to green innovation behavior. The study also found that Industry 4.0 technologies positively influence green innovation behavior, leading to improved green innovation performance.

MANAGEMENT OF ENVIRONMENTAL QUALITY (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Production scheduling for reconfigurable assembly systems: Mathematical modeling and algorithms

Bahman Naderi et al.

Summary: This study discusses the scheduling problem of a reconfigurable assembly system with changeable configurations and unique fittest configurations for different job sets. Mathematical modeling and artificial immune algorithms are proposed to solve small and large instances of the problem, respectively. Numerical experiments evaluate the model and performance of the algorithms.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Impact of Industry 4.0 Platform on the Formation of Construction 4.0 Concept: A Literature Review

Maria Kozlovska et al.

Summary: This article discusses the implementation of Industry 4.0 technologies in the construction industry and their impact on the formation of the Construction 4.0 concept. It found that Industry 4.0 has a significant impact on productivity growth in construction. The slow penetration of digital technologies in the construction industry highlights the need for further research on ethical issues and synergies between Construction 4.0 technologies.

SUSTAINABILITY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

An Agile System to Enhance Productivity through a Modified Value Stream Mapping Approach in Industry 4.0: A Novel Approach

Varun Tripathi et al.

Summary: The study aims to develop an agile system for sustaining productivity improvements in industry 4.0 through methods such as value stream mapping. The proposed methodology has been shown to encourage industry personnel during decision-making processes, resulting in enhanced production efficiency in industry 4.0.

SUSTAINABILITY (2021)

Add to Collection

Article Economics

Process innovation through industry 4.0 technologies, lean practices and green supply chains

Pietro De Giovanni et al.

Summary: The study shows that Lean practices facilitate supplier collaboration on environmental programs and positively impact environmental and operational performance. A process innovation strategy based on I4.0 technologies enhances the effect of Lean practices on operational performance, leading to higher economic outcomes. However, firms can achieve higher performance by either collaborating with suppliers on environmental programs or investing in I4.0 technologies, but not both simultaneously.

RESEARCH IN TRANSPORTATION ECONOMICS (2021)

Add to Collection

Proceedings Paper Engineering, Industrial

A Practical Deep Reinforcement Learning Approach to Semiconductor Equipment Scheduling

Changhee Lee et al.

Summary: Efficient operation of semiconductor equipment scheduling is crucial for maximizing profits. This paper proposes a new approach based on deep reinforcement learning, which has been proven feasible through experiments and shows that pre-trained models can enhance productivity in various production environments.

2021 22ND IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT) (2021)

Add to Collection

Article Management

SIMULATION-BASED OPTIMIZATION OF THE POLCA ORDERING SYSTEM

Natalia Cibele De Sousa Santos et al.

Summary: The study analyzes and compares the performance of the Paired-cell Overlapping Loops of Cards with Authorization (POLCA) system in a real automobile company case, finding that the optimized model significantly improves total output. However, trade-offs were identified, with an increase in intermediate stocks required to boost axle production.

INDEPENDENT JOURNAL OF MANAGEMENT & PRODUCTION (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Enhancing Whale Optimization Algorithm with Chaotic Theory for Permutation Flow Shop Scheduling Problem

Jiang Li et al.

Summary: In this study, the chaos whale algorithm (CWA) is proposed by optimizing the whale optimization algorithm (WOA) based on chaos theory. By combining with NEH and LRV rules to initialize the population, chaos theory is applied to improve the convergence speed and stability of the algorithm. Cross operator and reversal-insertion operator are utilized to enhance the search ability, leading to better performance in finding the minimum makespan through improved local search algorithm.

INTERNATIONAL JOURNAL OF COMPUTATIONAL INTELLIGENCE SYSTEMS (2021)

Add to Collection

Article Management

Integrating production scheduling, maintenance planning and energy controlling for the sustainable manufacturing systems under TOU tariff

Weiwei Cui et al.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY (2020)

Add to Collection

Article Engineering, Industrial

Applicability of Demand-Driven MRP in a complex manufacturing environment

Angela Patricia Velasco Acosta et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Visualization analysis of big data research based on Citespace

Weihong Wang et al.

SOFT COMPUTING (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Infinitely repeated game based real-time scheduling for low-carbon flexible job shop considering multi-time periods

Jin Wang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Environmental Sciences

The knowledge domain and emerging trends in phytoremediation: a scientometric analysis with CiteSpace

Yu Zhang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Multi-agent systems negotiation to deal with dynamic scheduling in disturbed industrial context

Tsegay Tesfay Mezgebe et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2020)

Add to Collection

Article Engineering, Industrial

A metric-based framework for sustainable production scheduling

Amin Abedini et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Industry 4.0, digitization, and opportunities for sustainability

Morteza Ghobakhloo

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

A hybrid multi-objective evolutionary algorithm to integrate optimization of the production scheduling and imperfect cutting tool maintenance considering total energy consumption

Youjun An et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

A novel multi-agent scheduling mechanism for adaptation of production plans in case of supply chain disruptions

Jing Tan et al.

AI COMMUNICATIONS (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Sustainability Outcomes of Green Processes in Relation to Industry 4.0 in Manufacturing: Systematic Review

Jaroslav Vrchota et al.

SUSTAINABILITY (2020)

Add to Collection

Article Automation & Control Systems

The integration of scheduling and control: Top-down vs. bottom-up

Adrian Caspari et al.

JOURNAL OF PROCESS CONTROL (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Machine learning for predictive scheduling and resource allocation in large scale manufacturing systems

Cristina Morariu et al.

COMPUTERS IN INDUSTRY (2020)

Add to Collection

Review Chemistry, Analytical

Advances in Sensor Technologies in the Era of Smart Factory and Industry 4.0 †

Tahera Kalsoom et al.

SENSORS (2020)

Add to Collection

Article Engineering, Industrial

Multi-agent system and reinforcement learning approach for distributed intelligence in a flexible smart manufacturing system

Yun Geon Kim et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An effective backtracking search algorithm for multi-objective flexible job shop scheduling considering new job arrivals and energy consumption

Rylan H. Caldeira et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Real-time production scheduling in the Industry-4.0 context: Addressing uncertainties in job arrivals and machine breakdowns

Mageed Ghaleb et al.

COMPUTERS & OPERATIONS RESEARCH (2020)

Add to Collection

Review Computer Science, Artificial Intelligence

Review of job shop scheduling research and its new perspectives under Industry 4.0

Jian Zhang et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2019)

Add to Collection

Article Computer Science, Information Systems

Improved hybrid immune clonal selection genetic algorithm and its application in hybrid shop scheduling

Gaoxiang Lou et al.

CLUSTER COMPUTING-THE JOURNAL OF NETWORKS SOFTWARE TOOLS AND APPLICATIONS (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

A Hybrid Genetic Programming Algorithm for Automated Design of Dispatching Rules

Su Nguyen et al.

EVOLUTIONARY COMPUTATION (2019)

Add to Collection

Review Construction & Building Technology

A scientometric analysis and critical review of construction related ontology research

Botao Zhong et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Review Construction & Building Technology

A scientometric analysis and critical review of computer vision applications for construction

Pablo Martinez et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Computer Science, Information Systems

A multi-agent architecture for scheduling in platform-based smart manufacturing systems

Yong-kui Liu et al.

FRONTIERS OF INFORMATION TECHNOLOGY & ELECTRONIC ENGINEERING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

BIM-based integrated delivery technologies for intelligent MEP management in the operation and maintenance phase

Zhen-Zhong Hu et al.

ADVANCES IN ENGINEERING SOFTWARE (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Toward Dynamic Resources Management for IoT-Based Manufacturing

Jiafu Wan et al.

IEEE COMMUNICATIONS MAGAZINE (2018)

Add to Collection

Proceedings Paper Computer Science, Information Systems

A Visualized Analysis of Game-Based Learning Research from 2013 to 2017

Xinrong Tao et al.

2018 INTERNATIONAL JOINT CONFERENCE ON INFORMATION, MEDIA AND ENGINEERING (ICIME) (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

A smart elevator scheduler that considers dynamic changes of energy cost and user traffic

Sungyong Ahn et al.

INTEGRATED COMPUTER-AIDED ENGINEERING (2017)

Add to Collection

Article Physics, Applied

Multi-objective flexible job shop scheduling problem using variable neighborhood evolutionary algorithm

Chun Wang et al.

MODERN PHYSICS LETTERS B (2017)

Add to Collection

Review Engineering, Multidisciplinary

Intelligent Manufacturing in the Context of Industry 4.0: A Review

Ray Y. Zhong et al.

ENGINEERING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An energy-efficient multi-objective optimization for flexible job-shop scheduling problem

Hadi Mokhtari et al.

COMPUTERS & CHEMICAL ENGINEERING (2017)

Add to Collection

Article Automation & Control Systems

Visualization of RFID-enabled shopfloor logistics Big Data in Cloud Manufacturing

Ray Y. Zhong et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Computer Science, Artificial Intelligence

Fast simulated annealing hybridized with quenching for solving job shop scheduling problem

Kashif Akram et al.

APPLIED SOFT COMPUTING (2016)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Systematic literature review of decision support models for energy efficient production planning

Konstantin Biel et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2016)

Add to Collection

Article Management

Green scheduling of a two-machine flowshop: Trade-off between makespan and energy consumption

S. Afshin Mansouri et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2016)

Add to Collection

Article Management

Energy-efficient scheduling in manufacturing companies: A review and research framework

Christian Gahm et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Solving the energy-efficient job shop scheduling problem: a multi-objective genetic algorithm with enhanced local search for minimizing the total weighted tardiness and total energy consumption

Rui Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Green & Sustainable Science & Technology

A generic method for energy-efficient and energy-cost-effective production at the unit process level

Xu Gong et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Review Computer Science, Interdisciplinary Applications

A review of emerging trends in global PPP research: analysis and visualization

Jinbo Song et al.

SCIENTOMETRICS (2016)

Add to Collection

Article Engineering, Industrial

PERIOD BATCH CONTROL - A PRODUCTION PLANNING SYSTEM APPLIED TO VIRTUAL MANUFACTURING CELLS

Z. Tesic et al.

INTERNATIONAL JOURNAL OF SIMULATION MODELLING (2016)

Add to Collection

Article Computer Science, Artificial Intelligence

Shop-floor resource virtualization layer with private cloud support

Octavian Morariu et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2016)

Add to Collection

Proceedings Paper Construction & Building Technology

A BIM-based dynamic model for site material supply

Qunzhou Yu et al.

5TH CREATIVE CONSTRUCTION CONFERENCE (CCC 2016) (2016)

Add to Collection

Article Construction & Building Technology

Patterns and trends in Building Information Modeling (BIM) research: A Latent Semantic Analysis

Mehmet Yalcinkaya et al.

AUTOMATION IN CONSTRUCTION (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Integrated planning and scheduling under production uncertainties: Bi-level model formulation and hybrid solution method

Yunfei Chu et al.

COMPUTERS & CHEMICAL ENGINEERING (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Petri net based decision system modeling in real-time scheduling and control of flexible automotive manufacturing systems

Ozkan Basak et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A dispatching rule-based genetic algorithm for multi-objective job shop scheduling using fuzzy satisfaction levels

Jing Huang et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An Ant Colony Algorithm (ACA) for solving the new integrated model of job shop scheduling and conflict-free routing of AGVs

Mohammad Saidi-Mehrabad et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2015)

Add to Collection

Article Automation & Control Systems

Reactive control of overall power consumption in flexible manufacturing systems scheduling: A Potential Fields model

C. Pach et al.

CONTROL ENGINEERING PRACTICE (2015)

Add to Collection

Article Engineering, Industrial

Bottom-up approach based on Internet of Things for order fulfillment in a collaborative warehousing environment

Paul J. Reaidy et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2015)

Add to Collection

Article Engineering, Industrial

Energy-aware manufacturing operations

Vittaldas V. Prabhu et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2015)

Add to Collection

Article Green & Sustainable Science & Technology

An energy-responsive optimization method for machine tool selection and operation sequence in flexible machining job shops

Yan He et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Engineering, Industrial

Sustainability in manufacturing operations scheduling: A state of the art review

Adriana Giret et al.

JOURNAL OF MANUFACTURING SYSTEMS (2015)

Add to Collection

Article Management

Integrated production planning and scheduling for a mixed batch job-shop based on alternant iterative genetic algorithm

Hong-Sen Yan et al.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY (2015)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Visualizing the structure and the evolving of digital medicine: a scientometrics review

Yuqing Fang

SCIENTOMETRICS (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Visualizing the intellectual structure and evolution of innovation systems research: a bibliometric analysis

Zhigao Liu et al.

SCIENTOMETRICS (2015)

Add to Collection

Article Engineering, Chemical

Moving horizon approach of integrating scheduling and control for sequential batch processes

Yunfei Chu et al.

AICHE JOURNAL (2014)

Add to Collection

Article Construction & Building Technology

A BIM-based construction quality management model and its applications

LiJuan Chen et al.

AUTOMATION IN CONSTRUCTION (2014)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Integrated production scheduling and process control: A systematic review

Michael Baldea et al.

COMPUTERS & CHEMICAL ENGINEERING (2014)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Integrated scheduling of production and rail transportation

M. Hajiaghaei-Keshteli et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

Integrated scheduling of renewable generation and electric vehicles parking lot in a smart microgrid

Masoud Honarmand et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection

Article Engineering, Chemical

Extended Discrete-Time Resource Task Network Formulation for the Reactive Scheduling of a Mixed Batch/Continuous Process

Yisu Nie et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Add to Collection

Article Automation & Control Systems

Optimization of POLCA-controlled production systems with a simulation-driven genetic algorithm

M. Braglia et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Automation & Control Systems

A clustering-based modified variable neighborhood search algorithm for a dynamic job shop scheduling problem

Mohammad Amin Adibi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Automation & Control Systems

A general analysis and control framework for process systems with inventory recycling

M. Baldea et al.

INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL (2014)

Add to Collection

Article Green & Sustainable Science & Technology

An investigation into minimising total energy consumption and total weighted tardiness in job shops

Ying Liu et al.

JOURNAL OF CLEANER PRODUCTION (2014)

Add to Collection

Article Green & Sustainable Science & Technology

Optimizing the production scheduling of a single machine to minimize total energy consumption costs

Fadi Shrouf et al.

JOURNAL OF CLEANER PRODUCTION (2014)

Add to Collection

Article Management

An effective iterated greedy algorithm for the mixed no-idle permutation flowshop scheduling problem

Quan-Ke Pan et al.

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE (2014)

Add to Collection

Article Computer Science, Artificial Intelligence

Optimization of job shop scheduling problems using modified clonal selection algorithm

Yilmaz Atay et al.

TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES (2014)

Add to Collection

Article Operations Research & Management Science

Flow shop scheduling with peak power consumption constraints

Kan Fang et al.

ANNALS OF OPERATIONS RESEARCH (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A variable iterated greedy algorithm with differential evolution for the no-idle permutation flowshop scheduling problem

M. Fatih Tasgetiren et al.

COMPUTERS & OPERATIONS RESEARCH (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A Ranking Chaos Algorithm for dual scheduling of cloud service and computing resource in private cloud

Yuanjun Laili et al.

COMPUTERS IN INDUSTRY (2013)

Add to Collection

Article Automation & Control Systems

Benchmarking flexible job-shop scheduling and control systems

Damien Trentesaux et al.

CONTROL ENGINEERING PRACTICE (2013)

Add to Collection

Review Automation & Control Systems

Literature review regarding Ant Colony Optimization applied to scheduling problems: Guidelines for implementation and directions for future research

R. F. Tavares Neto et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2013)

Add to Collection

Article Automation & Control Systems

Hybrid discrete particle swarm optimization for multi-objective flexible job-shop scheduling problem

Xinyu Shao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Industrial

Hybrid flow shop scheduling considering machine electricity consumption cost

Hao Luo et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2013)

Add to Collection

Article Engineering, Industrial

A neural network decision-making model for job-shop scheduling

Davood Golmohammadi

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Energy-efficient scheduling for a flexible flow shop using an improved genetic-simulated annealing algorithm

Min Dai et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2013)

Add to Collection

Article Automation & Control Systems

Nonlinear model predictive control of energy-integrated process systems

Michael Baldea et al.

SYSTEMS & CONTROL LETTERS (2013)

Add to Collection

Article Engineering, Industrial

Towards energy and resource efficient manufacturing: A processes and systems approach

Joost R. Duflou et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Industrial

Augmented reality applications in design and manufacturing

A. Y. C. Nee et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Engineering, Industrial

Energy-aware scheduling for improving manufacturing process sustainability: A mathematical model for flexible flow shops

A. A. G. Bruzzone et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A hybrid discrete differential evolution algorithm for the no-idle permutation flow shop scheduling problem with makespan criterion

Guanlong Deng et al.

COMPUTERS & OPERATIONS RESEARCH (2012)

Add to Collection

Article Automation & Control Systems

Real-Time Scheduling of Single-Arm Cluster Tools Subject to Residency Time Constraints and Bounded Activity Time Variation

Yan Qiao et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2012)

Add to Collection

Article Automation & Control Systems

Deadlock-Free Genetic Scheduling Algorithm for Automated Manufacturing Systems Based on Deadlock Control Policy

Ke Yi Xing et al.

IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART B-CYBERNETICS (2012)

Add to Collection

Article Engineering, Chemical

Integration of Scheduling and Control with Closed Loop Implementation

Jinjun Zhuge et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Add to Collection

Article Engineering, Industrial

A genetic algorithm approach for production scheduling with mould maintenance consideration

C. S. Wong et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2012)

Add to Collection

Article Green & Sustainable Science & Technology

A modeling method of task-oriented energy consumption for machining manufacturing system

Yan He et al.

JOURNAL OF CLEANER PRODUCTION (2012)

Add to Collection

Article Engineering, Industrial

Preventive maintenance optimization for a multi-component system under changing job shop schedule

Xiaojun Zhou et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2012)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Scheduling and control decision-making under an integrated information environment

Edrisi Munoz et al.

COMPUTERS & CHEMICAL ENGINEERING (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Restarted Iterated Pareto Greedy algorithm for multi-objective flowshop scheduling problems

Gerardo Minella et al.

COMPUTERS & OPERATIONS RESEARCH (2011)

Add to Collection

Article Engineering, Industrial

A Pareto approach to multi-objective flexible job-shop scheduling problem using particle swarm optimization and local search

Ghasem Moslehi et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2011)

Add to Collection

Article Engineering, Industrial

A new approach to scheduling in manufacturing for power consumption and carbon footprint reduction

Kan Fang et al.

JOURNAL OF MANUFACTURING SYSTEMS (2011)

Add to Collection

Article Operations Research & Management Science

A Combination of Lagrangian Relaxation and Column Generation for Order Batching in Steelmaking and Continuous-Casting Production

Lixin Tang et al.

NAVAL RESEARCH LOGISTICS (2011)

Add to Collection

Article Computer Science, Artificial Intelligence

Multiprocessor task scheduling in multistage hybrid flow-shops: A parallel greedy algorithm approach

Cengiz Kahraman et al.

APPLIED SOFT COMPUTING (2010)

Add to Collection

Article Computer Science, Artificial Intelligence

Flexible job-shop scheduling with parallel variable neighborhood search algorithm

M. Yazdani et al.

EXPERT SYSTEMS WITH APPLICATIONS (2010)

Add to Collection

Article Computer Science, Artificial Intelligence

A multi-objective ant colony system algorithm for flow shop scheduling problem

Betul Yagmahan et al.

EXPERT SYSTEMS WITH APPLICATIONS (2010)

Add to Collection

Article Engineering, Chemical

Resiliency Issues in Integration of Scheduling and Control

Kishalay Mitra et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Add to Collection

Article Engineering, Industrial

Simulation study of coordinating layout change and quality improvement for adapting job shop manufacturing to CONWIP control

Jing-Wen Li

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2010)

Add to Collection

Article Operations Research & Management Science

MANAGING A FLOW LINE WITH SINGLE-KANBAN, DUAL-KANBAN OR CONWIP

KUM KHIONG YANG

PRODUCTION AND OPERATIONS MANAGEMENT (2010)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A genetic algorithm and a simulated annealing algorithm combined with column generation technique for solving the problem of scheduling in the hybrid flowshop with additional resources

Ewa Figielska

COMPUTERS & INDUSTRIAL ENGINEERING (2009)

Add to Collection

Article Computer Science, Theory & Methods

A variable neighborhood search for job shop scheduling with set-up times to minimize makespan

V. Roshanaei et al.

FUTURE GENERATION COMPUTER SYSTEMS-THE INTERNATIONAL JOURNAL OF ESCIENCE (2009)

Add to Collection

Article Engineering, Industrial

Comparing TOC with MRP and JIT: a literature review

M. Gupta et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2009)

Add to Collection

Article Engineering, Industrial

An immune algorithm for scheduling a hybrid flow shop with sequence-dependent setup times and machines with random breakdowns

M. Zandieh et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2009)

Add to Collection

Article Engineering, Industrial

Planning and implementing POLCA: a card-based control system for high variety or custom engineered products

Ananth Krishnamurthy et al.

PRODUCTION PLANNING & CONTROL (2009)

Add to Collection

Article Engineering, Industrial

A lean production control system for high-variety/low-volume environments: a case study implementation

Jannes Slomp et al.

PRODUCTION PLANNING & CONTROL (2009)

Add to Collection

Review Medicine, General & Internal

Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement

David Moher et al.

PLOS MEDICINE (2009)

Add to Collection

Article Computer Science, Software Engineering

A Multi-swarm Approach to Multi-objective Flexible Job-shop Scheduling Problems

Hongbo Liu et al.

FUNDAMENTA INFORMATICAE (2009)

Add to Collection

Article Engineering, Industrial

Development of new features of ant colony optimization for flowshop scheduling

B. M. T. Lin et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2008)

Add to Collection

Article Computer Science, Information Systems

Multi-Objective Particle Swarm Optimization with time variant inertia and acceleration coefficients

Praveen Kumar Tripathi et al.

INFORMATION SCIENCES (2007)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A tabu search algorithm with a new neighborhood structure for the job shop scheduling problem

ChaoYong Zhang et al.

COMPUTERS & OPERATIONS RESEARCH (2007)

Add to Collection

Article Mathematics, Applied

An optimization algorithm based on chaotic behavior and fractal nature

Mohammad Saleh Tavazoei et al.

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2007)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An ant colony optimization for single-machine tardiness scheduling with sequence-dependent setups

Ching-Jong Liao et al.

COMPUTERS & OPERATIONS RESEARCH (2007)

Add to Collection

Article Automation & Control Systems

Feedback control for optimal process operation

Sebastian Engell

JOURNAL OF PROCESS CONTROL (2007)

Add to Collection

Review Automation & Control Systems

Literature review of JIT-KANBAN system

C. Sendil Kumar et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A new Lagrangian relaxation algorithm for hybrid flowshop scheduling to minimize total weighted completion time

LX Tang et al.

COMPUTERS & OPERATIONS RESEARCH (2006)

Add to Collection

Article Engineering, Industrial

Generic POLCA - A production and materials flow control mechanism for quick response manufacturing

Nuno Octavio Fernandes et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2006)

Add to Collection

Article Engineering, Chemical

Simultaneous cyclic scheduling and control of a multiproduct CSTR

Antonio Flores-Tlacuahuac et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)

Add to Collection

Article Automation & Control Systems

Pareto archived simulated annealing for job shop scheduling with multiple objectives

R. K. Suresh et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)

Add to Collection

Article Management

A hybrid genetic algorithm for the job shop scheduling problem

JF Gonçalves et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2005)

Add to Collection

Article Computer Science, Artificial Intelligence

A neural network model and algorithm for the hybrid flow shop scheduling problem in a dynamic environment

LX Tang et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2005)

Add to Collection

Article Engineering, Manufacturing

An advanced tabu search algorithm for the job shop problem

E Nowicki et al.

JOURNAL OF SCHEDULING (2005)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An effective hybrid optimization approach for multi-objective flexible job-shop scheduling problems

WJ Xia et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2005)

Add to Collection

Article Engineering, Industrial

Allocating work in process in a multiple-product CONWIP system with lost sales

SM Ryan et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2005)

Add to Collection

Review Management

Periodic review (s, S) inventory model with permissible delay in payments

BS Maddah et al.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY (2004)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Control structure design for complete chemical plants

S Skogestad

COMPUTERS & CHEMICAL ENGINEERING (2004)

Add to Collection

Article Engineering, Industrial

A periodic-review inventory system with supply interruptions

ZL Li et al.

PROBABILITY IN THE ENGINEERING AND INFORMATIONAL SCIENCES (2004)

Add to Collection

Article Automation & Control Systems

An immune algorithm approach to the scheduling of a flexible PCB flow shop

D Alisantoso et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)

Add to Collection

Article Computer Science, Artificial Intelligence

Neural networks in production scheduling: Intelligent solutions and future promises

K Metaxiotis et al.

APPLIED ARTIFICIAL INTELLIGENCE (2003)

Add to Collection

Article Engineering, Industrial

Period batch control: classic, not outdated

J Benders et al.

PRODUCTION PLANNING & CONTROL (2002)

Add to Collection

Article Computer Science, Artificial Intelligence

A knowledge-based approach to maintenance project planning

GP Moynihan et al.

EXPERT SYSTEMS (2002)

Add to Collection

Article Engineering, Industrial

Steel-making process scheduling using Lagrangian relaxation

LX Tang et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2002)

Add to Collection

Article Automation & Control Systems

Nonlinear dynamics and control of process systems with recycle

A Kumar et al.

JOURNAL OF PROCESS CONTROL (2002)

Add to Collection

Article Management

A periodic review inventory system with emergency replenishments

G Tagaras et al.

MANAGEMENT SCIENCE (2001)

Add to Collection

Article Engineering, Industrial

A multi-dimensional classification of production systems for the design and selection of production planning and control systems

BL MacCarthy et al.

PRODUCTION PLANNING & CONTROL (2000)

Add to Collection

Article Engineering, Industrial

OPT scheduling performances: a case study

F Croci et al.

PRODUCTION PLANNING & CONTROL (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.