☆ 4.6 Article

Performance of Statistical and Intelligent Methods in Estimating Rock Compressive Strength

SUSTAINABILITY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Research on Fault Activation and Its Influencing Factors on the Barrier Effect of Rock Mass Movement Induced by Mining

Yanhui Guo et al.

Summary: The study uses the discrete element numerical simulation software 3DEC to analyze the driving forces and influencing factors of fault activation and its barrier effect on rock mass movement under the influence of mining. The results show that the distance between mining areas and faults, the buried depth of the upper boundary of the fault, the size of the mining area, and the thickness of the fault zone all have impacts on fault activation and its barrier effect.

APPLIED SCIENCES-BASEL (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Evolving support vector regression using Grey Wolf optimization; forecasting the geomechanical properties of rock

Chuanhua Xu et al.

Summary: This study presents an evolving support vector regression (SVR) model using Grey Wolf optimization (GWO) for predicting the shear strength (SS) and uniaxial compressive strength (UCS) of rocks. The experimental results show that the proposed SVR-GWO model outperforms other models in the prediction of these parameters.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Geochemistry & Geophysics

Estimation of dynamic properties of sandstones based on index properties using artificial neural network and multivariate linear regression methods

Sayed Mehdi Alizadeh et al.

Summary: The study focused on estimating the dynamic properties of sandstones, finding that mineralogy had a greater impact on mechanical properties than on dynamic properties, with quartz having the most significant effect on dynamic properties. Utilizing artificial neural network (ANN) and multivariate linear regression analysis (MVLRA) methods, the dynamic elastic modulus, compressional and shear wave velocities were accurately estimated, with ANN outperforming MVLRA in accuracy.

ACTA GEOPHYSICA (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A new hybrid grey wolf optimizer-feature weighted-multiple kernel-support vector regression technique to predict TBM performance

Haiqing Yang et al.

Summary: A new hybrid intelligence technique was introduced to predict the performance of the full-face tunnel boring machine (TBM). By measuring and considering the important parameters, a predictive model was established and evaluated. The results showed that the model had high accuracy in predicting the TBM performance.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Materials Science, Characterization & Testing

A Comparison Among Some Non-linear Prediction Tools on Indirect Determination of Uniaxial Compressive Strength and Modulus of Elasticity of Basalt

N. Yesiloglu-Gultekin et al.

Summary: Basalt is widely used in construction for its properties. This study aims to develop non-linear prediction models for uniaxial compressive strength (UCS) and elasticity modulus (E-i) by using simple and non-destructive test results. The performance of different algorithms were assessed and compared using various metrics. The results show that the ANFIS model performs slightly better in predicting UCS, while the ANN model is the most successful in predicting E-i. The models using porosity and sonic velocity as input parameters exhibit the highest correlation with observed data for predicting UCS, while the models with three inputs perform best for predicting E-i.

JOURNAL OF NONDESTRUCTIVE EVALUATION (2022)

Add to Collection

Article Engineering, Geological

Automated Recognition Model of Geomechanical Information Based on Operational Data of Tunneling Boring Machines

Haiqing Yang et al.

Summary: This study aims to establish an automatic prediction model for geological conditions based on the operational data of TBM. By using clustering analysis and classifier model selection, a geological prediction model was successfully constructed. Among the input parameters of the model, the total thrust force, penetration rate, and ratio of thrust to torque have the greatest influence on the prediction of ground conditions.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Prediction of flyrock throw distance in quarries by variable selection procedures and ANFIS modelling technique

Turker Hudaverdi

Summary: This study suggests using variable reduction procedures for predicting flyrock and develops two predictive models. The findings indicate that pre-statistical analysis can improve the performance of the predictive models.

ENVIRONMENTAL EARTH SCIENCES (2022)

Add to Collection

Article Engineering, Geological

Machine learning-assisted distinct element model calibration: ANFIS, SVM, GPR, and MARS approaches

Hadi Fathipour-Azar

Summary: This paper explores the use of ANFIS, SVM, GPR, and MARS methods for predicting the UCS of the Voronoi-based UDEC model based on microshear strength properties of contacts. The performance of the predictive models was evaluated using statistical functions, showing high performance indices for the models in making a rapid assessment of the calibration process.

ACTA GEOTECHNICA (2022)

Add to Collection

Article Construction & Building Technology

Optimization of random forest through the use of MVO, GWO and MFO in evaluating the stability of underground entry-type excavations

Jian Zhou et al.

Summary: This study investigates the application of hybrid models based on the random forest algorithm for stability evaluation in underground entry-type excavations. Three optimization strategies are employed to establish three hybrid models, and the classification ability of these models is validated using multiple measurement indexes.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2022)

Add to Collection

Article Acoustics

A Novel Reconstruction Method for Temperature Distribution Measurement Based on Ultrasonic Tomography

Bo Zhu et al.

Summary: This article proposes a novel two-step reconstruction method for precise temperature distribution measurement, which provides high-resolution images and maintains high accuracy. By utilizing equilibrium optimizer and Gaussian process regression techniques, it effectively improves the resolution of temperature distribution images and reduces reconstruction errors.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2022)

Add to Collection

Article Construction & Building Technology

Cross-correlation stacking-based microseismic source location using three metaheuristic optimization algorithms

Jian Zhou et al.

Summary: Microseismic location systems are known for their high-speed and high precision. However, the requirement of high precision can lead to slower calculation speed. This research focuses on using metaheuristic algorithms to improve the performance of cross-correlation stacking (CCS) for better location accuracy. The study shows that appropriate control parameters can greatly enhance the performance of metaheuristic algorithms, with moth flame optimization (MFO) being the most effective. CCS is found to be superior to traditional methods in terms of location efficiency, and its performance is influenced by the speed model and number of sensors.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2022)

Add to Collection

Article Thermodynamics

Wellbore cooling and heat energy utilization method for deep shale gas horizontal well drilling

Dong Xiao et al.

Summary: This study highlights the characteristics of deep shale gas drilling process and develops a transient model of wellbore temperature distribution. It emphasizes the effectiveness of insulated drill pipes in reducing wellbore temperature and establishes a system for wellbore cooling and heat energy utilization based on insulated drill pipes and organic Rankine cycle.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Data-Worth Analysis for Heterogeneous Subsurface Structure Identification With a Stochastic Deep Learning Framework

Chuanjun Zhan et al.

Summary: Reliable characterization of subsurface structures is crucial for earth sciences and related applications. Data assimilation-based identification frameworks, coupled with non-isothermal flow and transport simulations, can accurately estimate subsurface structures using available observations. Results show that including dynamic observations improves structure identification and reduces uncertainty. Furthermore, the deep learning-based framework outperforms stochastic methods in accurately identifying subsurface structures.

WATER RESOURCES RESEARCH (2022)

Add to Collection

Article Engineering, Geological

Numerical Investigation of Brittleness Effect on Strength and Microcracking Behavior of Crystalline Rock

Jun Peng et al.

Summary: This study investigates the influence of brittleness on the microcracking behavior of crystalline rock using numerical simulations. The results show that as the brittleness decreases, the failure mode of the rock changes from tension to shear, and the ratio of grain boundary cracks to shear cracks increases. The transition from tensile crack to shear crack is observed under both uniaxial compression and direct tension.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2022)

Add to Collection

Article

Computational intelligence approaches for estimating the unconfined compressive strength of rocks

Mosbeh R. Kaloop et al.

Arabian Journal of Geosciences (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Random forest rock type classification with integration of geochemical and photographic data

McLean Trott et al.

Summary: This study examines the impact of integrating distinct datasets with complementary characteristics using random forest algorithms to improve the classification of rock types. The results indicate that integrating photography-based and composition-based feature inputs can enhance the classification of lithology.

APPLIED COMPUTING AND GEOSCIENCES (2022)

Add to Collection

Article Engineering, Environmental

Assessment of water resources quality of a karstic aquifer in the Southwest of Iran

Zahra Shirnezhad et al.

Summary: This study investigated the pollution risks related to arsenic, fluorine, iron, physicochemical parameters, and various indices in the Bazoft dam site in west Iran. The water quality was found to be suitable for irrigation and drinking purposes.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Energy & Fuels

Artificial neural network (ANN) approach to predict unconfined compressive strength (UCS) of oil and gas well cement reinforced with nanoparticles

Phillip D. McElroy et al.

Summary: This study predicted the unconfined compressive strength (UCS) of oil well cement class H using artificial neural network (ANN) modeling, with cement samples embedded with pre-dispersed nanoparticles of nano-SiO2, nano-Al2O3, and nano-TiO2. Nano-SiO2 and nano-Al2O3 showed good dispersibility, while nano-TiO2 tended to agglomerate at high concentrations, negatively impacting the cement's UCS. The ANN model demonstrated superior statistical performance compared to multi-linear (MLR) and random forest (RF) regression algorithms, showing high predictive accuracy and potential to replace destructive UCS tests in the petroleum industry.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Experimental assessment and modeling of fracture and fatigue resistance of aged stone matrix asphalt (SMA) mixtures containing RAP materials and warm-mix additive using ANFIS method

Seyed Ataollah Saed et al.

Summary: The study investigated the effects of incorporating reclaimed asphalt pavement (RAP) materials into hot mix asphalt (HMA) and warm mix asphalt (WMA) stone matrix asphalt (SMA) mixtures on fatigue life and fracture resistance. Results showed that the addition of RAP materials to HMA mixtures decreased fatigue life and fracture resistance, with improved fracture resistance observed at intermediate temperatures. Adding WMA additives to SMA mixtures containing RAP materials enhanced fracture resistance but reduced fatigue lives compared to HMA mixtures. The ANFIS model was able to accurately estimate fracture and fatigue parameters.

MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Modeling uniaxial compressive strength of some rocks from turkey using soft computing techniques

Enes Gul et al.

Summary: The study focuses on estimating the UCS of rocks using machine learning methods, with the MLPNN model outperforming other models in terms of RMSE, MAE, VAF, and R-2.

MEASUREMENT (2021)

Add to Collection

Article Engineering, Civil

Dynamic prediction models of rock quality designation in tunneling projects

Arsalan Mahmoodzadeh et al.

Summary: Machine learning is employed to enhance the prediction accuracy of the RQD parameter in tunnel engineering, utilizing various ML methods and updating techniques. The GPR model demonstrated high accuracy and consistency with actual results during the pre-update and update phases in the Hamru road tunnel in Iran.

TRANSPORTATION GEOTECHNICS (2021)

Add to Collection

Article Energy & Fuels

Rock Strength Prediction in Real-Time While Drilling Employing Random Forest and Functional Network Techniques

Hany Gamal et al.

Summary: This study utilized artificial intelligence to predict rock strength in real-time, with a PCA-based random forest model outperforming a functional network model in terms of accuracy. The developed models provide an accurate estimation of UCS from drilling data, improving efficiency and well stability.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Geochemistry & Geophysics

Prediction of blast-induced ground vibration using GPR and blast-design parameters optimization based on novel grey-wolf optimization algorithm

A. Lawal et al.

Summary: Blasting is a crucial part of mining operations, but it can have negative environmental impacts such as BIGV. This study proposed using GPR for predicting BIGV and GWO algorithm for optimizing blast-design parameters. The GPR model showed high accuracy compared to other models, with R-2 of approximately 1 and VAF of about 100%. The GWO revealed that reducing the number of holes and charge per delay could significantly reduce PPV. The proposed models are effective for predicting PPV and optimizing blast-design parameters.

ACTA GEOPHYSICA (2021)

Add to Collection

Article Environmental Sciences

Evaluation of engineering characteristics and estimation of static properties of clay-bearing rocks

Ahmad Rastegarnia et al.

Summary: The study examined the static and dynamic properties of rocks at the Godarkhosh dam site in western Iran, proposing relationships to estimate mechanical properties using various methods. Clay rocks were found to have low swelling potential, while marls had higher mechanical and dynamic properties compared to shales. Artificial neural networks showed higher accuracy in estimating elasticity modulus and compressive strength.

ENVIRONMENTAL EARTH SCIENCES (2021)

Add to Collection

Article Engineering, Geological

Effect of Water Content on Argillization of Mudstone During the Tunnelling process

Bolong Liu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Add to Collection

Article Green & Sustainable Science & Technology

A Sensitivity and Robustness Analysis of GPR and ANN for High-Performance Concrete Compressive Strength Prediction Using a Monte Carlo Simulation

Dong Van Dao et al.

SUSTAINABILITY (2020)

Add to Collection

Article Multidisciplinary Sciences

Gaussian Process Regression Technique to Estimate the Pile Bearing Capacity

Ehsan Momeni et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Mechanical and Physical Based Artificial Neural Network Models for the Prediction of the Unconfined Compressive Strength of Rock

Wasim S. Barham et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Evaluation of empirical estimation of uniaxial compressive strength of rock using measurements from index and physical tests

Adeyemi Emman Aladejare

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Prediction of mechanical and physical properties of some sedimentary rocks from ultrasonic velocities

Osman Uyanik et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)

Add to Collection

Article Engineering, Geological

Assessing the uniaxial compressive strength of extremely hard cryptocrystalline flint

M. M. Aliyu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Article Engineering, Geological

Assessment of the engineering geological characteristics of the Bazoft dam site, SW Iran

Ahmad Rastegarnia et al.

QUARTERLY JOURNAL OF ENGINEERING GEOLOGY AND HYDROGEOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Support vector regression approach with different kernel functions for predicting blast-induced ground vibration: a case study in an open-pit coal mine of Vietnam

Hoang Nguyen

SN APPLIED SCIENCES (2019)

Add to Collection

Article Engineering, Geological

Correlation of Geo-Mechanics Parameters with Uniaxial Compressive Strength and P-Wave Velocity on Dolomitic Limestone Using a Statistical Method

Lei Wen et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Developing GPR model for forecasting the rock fragmentation in surface mines

Wei Gao et al.

ENGINEERING WITH COMPUTERS (2018)

Add to Collection

Article Engineering, Geological

Model test on the entrainment phenomenon and energy conversion mechanism of flow-like landslides

H. Q. Yang et al.

ENGINEERING GEOLOGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Determination of strength and modulus of elasticity of heterogenous sedimentary rocks: An ANFIS predictive technique

Ravi Kumar Umrao et al.

MEASUREMENT (2018)

Add to Collection

Article Engineering, Multidisciplinary

Estimation of punch strength index and static properties of sedimentary rocks using neural networks in south west of Iran

Ahmad Rastegarnia et al.

MEASUREMENT (2018)

Add to Collection

Article Construction & Building Technology

Effects of joints on the cutting behavior of disc cutter running on the jointed rock mass

H. Q. Yang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

Variable selection and prediction of uniaxial compressive strength and modulus of elasticity by random forest

S. S. Matin et al.

APPLIED SOFT COMPUTING (2018)

Add to Collection

Article Engineering, Geological

Correlation Between Physiomechanical Parameters and Geotechnical Evaluations of Some Sandstones Along the Calabar/Odukpani-Ikom-Ogoja Highway Transect, Southeastern Nigeria

Aniekan Edet

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Prediction of Engineering Properties of Basalt Rock in Jordan Using Ultrasonic Pulse Velocity Test

Hussein Aldeeky et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Environmental

Some carbonate rock texture effects on mechanical behavior, based on Koohrang tunnel data, Iran

Rassoul Ajalloeian et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2017)

Add to Collection

Article Engineering, Geological

Application of statistical methods for predicting uniaxial compressive strength of limestone rocks using nondestructive tests

Abdolazim Azimian

ACTA GEOTECHNICA (2017)

Add to Collection

Article Engineering, Multidisciplinary

Prediction of geomechanical parameters using soft computing and multiple regression approach

Rajesh Singh et al.

MEASUREMENT (2017)

Add to Collection

Article Engineering, Geological

Investigation into engineering parameters of marls from Seydoon dam in Iran

Sohrab Salehin

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Prediction of uniaxial compressive strength of intact rocks using ultrasonic pulse velocity and rebound-hammer number

Levent Selcuk et al.

QUARTERLY JOURNAL OF ENGINEERING GEOLOGY AND HYDROGEOLOGY (2016)

Add to Collection

Article Engineering, Multidisciplinary

Prediction of compressive strength and elastic modulus of carbonate rocks

N. Madhubabu et al.

MEASUREMENT (2016)

Add to Collection

Article Environmental Sciences

Comparative evaluation of artificial intelligence models for prediction of uniaxial compressive strength of travertine rocks, Case study: Azarshahr area, NW Iran

Rahim Barzegar et al.

MODELING EARTH SYSTEMS AND ENVIRONMENT (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Predictive lithological mapping of Canada's North using Random Forest classification applied to geophysical and geochemical data

J. R. Harris et al.

COMPUTERS & GEOSCIENCES (2015)

Add to Collection

Article Engineering, Environmental

Prediction of the unconfined compressive strength of soft rocks: a PSO-based ANN approach

Edy Tonnizam Mohamad et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)

Add to Collection

Article Engineering, Civil

Opposition-based firefly algorithm for earth slope stability evaluation

Mohammad Khajehzadeh et al.

CHINA OCEAN ENGINEERING (2014)

Add to Collection

Article Engineering, Geological

Analysis of the excavation damaged zone around a tunnel accounting for geostress and unloading

H. Q. Yang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

Add to Collection

Article Geosciences, Multidisciplinary

Application of support vector machines and relevance vector machines in predicting uniaxial compressive strength of volcanic rocks

Nurcihan Ceryan

JOURNAL OF AFRICAN EARTH SCIENCES (2014)

Add to Collection

Article Engineering, Geological

Prediction of uniaxial compressive strength of granitic rocks by various nonlinear tools and comparison of their performances

N. Yesiloglu-Gultekin et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Support vector regression to predict porosity and permeability: Effect of sample size

A. F. Al-Anazi et al.

COMPUTERS & GEOSCIENCES (2012)

Add to Collection

Article Engineering, Geological

Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks

S. Yagiz et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2012)

Add to Collection

Article Geochemistry & Geophysics

Physical and Mechanical Properties of Serpentinized Ultrabasic Rocks in NW Turkey

C. Kurtulus et al.

PURE AND APPLIED GEOPHYSICS (2012)

Add to Collection

Article Engineering, Environmental

Determination of mechanical properties of rocks using simple methods

A. Kilic et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2008)

Add to Collection

Article Engineering, Geological

Evaluation of simple methods for assessing the uniaxial compressive strength of rock

S Kahraman

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.