☆ 4.8 Article

An insight into adiabatic efficiency hybrid modeling in Laser-Based Powder Bed Fusion of 316L stainless steel

NANO ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Difunctional NH 2-modified MOF supporting plentiful ion channels and stable LiF-rich SEI construction via organocatalysis for all-solid-state lithium metal batteries

Xuanyi Zhou et al.

Summary: In this study, Zeolitic Imidazolate Frameworks (ZIFs) modified by two different functional groups (-NH 2 and - CH 3 ) were used as the fillers of polyethylene oxide (PEO) composite solid electrolytes to explore the catalytic effect of groups on LiF generation. The PEO-ZIF-NH 2 with LiF-rich solid electrolyte interphase (SEI) exhibited enhanced cycling performance compared to PEO-ZIF-CH 3 . First-principles calculation revealed that ZIFs-NH 2 made the C-F bond in TFSI- longer, leading to easier breakage and promoted LiF formation. This simple design idea of using organic catalysis provides a new aspect for preparing high-performance lithium metal batteries.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Heterostructured Gel Polymer Electrolyte Enabling Long-Cycle Quasi-Solid-State Lithium Metal Batteries

Shaolun Cui et al.

Summary: Researchers developed a heterostructured gel polymer electrolyte to enhance lithium ion transport and stabilize the lithium metal electrode interface. This design led to improved cycle stability of the lithium metal electrode.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Engineering, Environmental

Poly(ionic liquid)-functionalized graphene oxide towards ambient temperature operation of all-solid-state PEO-based polymer electrolyte lithium metal batteries

Wei Bao et al.

Summary: To develop next generation all-solid-state lithium metal batteries, it is important to have polyethylene oxide (PEO)-based electrolyte with low crystallinity and high Li+ transport channels. This study proposes a new type of oxyethyl containing poly(ionic liquid) modified graphene oxide nanoparticles (ox-PIL@GO) for preparing PEO based organic-inorganic composite electrolyte membranes (CPEs). Experimental and simulation results show that ox-PIL@GO can enhance LiTFSI dissociation and inhibit TFSI- movement, resulting in improved lithium transference number and reduced crystallinity of PEO, leading to high ionic conductivity and cycling performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Enabling Stable Interphases via In Situ Two-Step Synthetic Bilayer Polymer Electrolyte for Solid-State Lithium Metal Batteries

Ying Liu et al.

Summary: This study presents a special double-layer polymer electrolyte design that addresses the interface issues in poly(ethylene oxide) (PEO)-based electrolytes. By connecting the two layers at a microscopic chemical level, the electrolyte achieves uniform ion flux and fast ion conduction. It demonstrates excellent cycling stability and high specific discharge capacity in high-energy-density lithium metal batteries.

INORGANICS (2022)

Add to Collection

Article Chemistry, Analytical

Thermoluminescence characteristics of lithium borosilicate glass doped with Sm2O3

A. Abdelmonem et al.

Summary: The study found that the lithium borosilicate glass composite doped with 0.05 mol% Sm2O3 exhibited the highest thermoluminescence response, with excellent dose-response and reproducibility. The composite showed a linear dose-response over a wide range of gamma doses, as well as moderate thermal fading and excellent reproducibility, making it promising for radiation detection applications.

LUMINESCENCE (2021)

Add to Collection

Article Chemistry, Applied

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Su Wang et al.

Summary: In this study, an easy-to-construct polymer/inorganic composite solid-state electrolyte (CSSE) was developed by integrating LLZO ceramics into PEO to inhibit the growth of Li dendrites and widen the electrochemical stability window. The designed PLL-CSSE showed outstanding cycling performance and high Coulombic efficiency in LiFePO4-Li cell, with a capacity retention of 82.4% after 200 cycles when combined with NCM622 cathode. The uniform dispersion of LLZO in PEO matrix was responsible for the improved electrochemical performance, indicating a promising pathway for the development of high energy density all-solid-state lithium batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Multidisciplinary Sciences

Unlocking solid-state conversion batteries reinforced by hierarchical microsphere stacked polymer electrolyte

Jiulin Hu et al.

Summary: The study introduces an all-solid-state Li-FeF3 conversion battery reinforced by hierarchical microsphere stacked polymer electrolyte for the first time. The utilization of a lightweight gC3N4 stuffed polyethylene oxide-based electrolyte enables improved conductivity and Li+ transference number, as well as enhanced stability and cycling performance of the battery. The results provide a promising solution for high energy and safe conversion-type Li metal batteries.

SCIENCE BULLETIN (2021)

Add to Collection

Article Chemistry, Physical

A novel nanocomposite electrolyte with ultrastable interface boosts long life solid-state lithium metal batteries

Wenjie Qu et al.

Summary: The novel ZrO2-based nanocomposite electrolyte significantly enhances the conductivity and transport of lithium ions in solid-state lithium metal batteries, leading to superior cycling performance and stability of the batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Chemistry Enables Stable Cycling of All-Solid-State Li Metal Batteries at High Current Densities

Biyi Xu et al.

Summary: The addition of Mg(ClO4)(2) into PEO-based composite electrolyte effectively regulates Li+ ion transport and enhances the Li+ ion mobility, leading to the formation of a conductive Li2MgCl4/LiF interfacial layer that homogenizes Li+ flux and increases the critical current density to a record 2 mA cm(-2). These findings highlight the importance of surface chemistry and interfacial engineering in designing high-current-density all-solid-state Li metal batteries.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Editorial Material Chemistry, Physical

Three-dimensional fiber network reinforced polymer electrolyte for dendrite-free all-solid-state lithium metal batteries

Zheng Zhang et al.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Cross-Linked Chains of Metal-Organic Framework Afford Continuous Ion Transport in Solid Batteries

Qinghan Zeng et al.

Summary: Continuous ion-conductive paths were constructed by cross-linked MOF chains, leading to improved performance of solid-state batteries with more than 100% enhanced specific capacity and stable cycling performance. This work provides a splendid strategy for developing high-performance solid electrolytes with porous ion conductors.

ACS ENERGY LETTERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress of asymmetric solid-state electrolytes for lithium/sodium-metal batteries

Bowen Jiang et al.

Summary: The development of solid-state alkali-metal batteries is hindered by solid-state electrolytes, but recent advancements in asymmetric solid-state electrolytes (ASEs) with multi-layered structures have successfully addressed this issue, achieving superior performance in lithium/sodium-metal batteries.

ENERGYCHEM (2021)

Add to Collection

Article Chemistry, Physical

A 3D fiber skeleton reinforced PEO-based polymer electrolyte for high rate and ultra-long cycle all-solid-state batteries

Zhangqin Shi et al.

Summary: In this study, loofah sponge anion exchange fiber (LS-AEF) was used as a modifier for PEO-based solid polymer electrolytes, leading to enhanced battery performance and exceptional cycle stability. The introduction of LS-AEF improved the dissociation of LiTFSI and boosted the ion migration number, resulting in high capacity retention rates even after 1000 cycles. This research demonstrates the potential for biomass materials to be utilized in polymer reinforcement for next-generation lithium batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Composite Polymer Electrolyte Incorporating Metal-Organic Framework Nanosheets with Improved Electrochemical Stability for All-Solid-State Li Metal Batteries

Qingyue Han et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Electrochemistry

Metal Organic Framework Nanorod Doped Solid Polymer Electrolyte with Decreased Crystallinity for High-Performance All-Solid-State Lithium Batteries

Zheng Zhang et al.

CHEMELECTROCHEM (2020)

Add to Collection

Article Chemistry, Physical

Exploring porous (zeolitic imidazolate frame work-8) ZIF-8 as an efficient filler for high-performance poly(ethyleneoxide)-based solid polymer electrolytes

Zhiwen Lei et al.

NANO RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of a novel metal-organic nanocomposite film (MONF) with superior corrosion protection performance based on the biomimetic polydopamine (PDA)-based molecules and Sm2O3 particles on the steel surface

Farshad Bahremand et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Multidisciplinary Sciences

Immunizing lithium metal anodes against dendrite growth using protein molecules to achieve high energy batteries

Tianyi Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing a Lithium Metal Battery by an In Situ Li2S-modified Interfacial Layer via Amorphous-Sulfide Composite Solid Electrolyte

Chen Lai et al.

NANO LETTERS (2020)

Add to Collection

Article Chemistry, Physical

g-C3N4 nanosheets enhanced solid polymer electrolytes with excellent electrochemical performance, mechanical properties, and thermal stability

Zongjie Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Mg2B2O5 Nanowire Enabled Multifunctional Solid-State Electrolytes with High Ionic Conductivity, Excellent Mechanical Properties, and Flame-Retardant Performance

Ouwei Sheng et al.

NANO LETTERS (2018)

Add to Collection

Article Polymer Science

Seaweed Biomass-Derived Flame-Retardant Gel Electrolyte Membrane for Safe Solid-State Supercapacitors

Tingting Ye et al.

MACROMOLECULES (2018)

Add to Collection

Article Multidisciplinary Sciences

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Xiulin Fan et al.

SCIENCE ADVANCES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks as Platforms for Catalytic Applications

Long Jiao et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Recent advances in solid polymer electrolytes for lithium batteries

Qingqing Zhang et al.

NANO RESEARCH (2017)

Add to Collection

Article Multidisciplinary Sciences

An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes

Chen-Zi Zhao et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Improved lithium-ion and electrically conductive sulfur cathode for all-solid-state lithium-sulfur batteries

Cheng Zhang et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Solid polymer electrolyte based on ionic bond or covalent bond functionalized silica nanoparticles

Ji Hu et al.

RSC ADVANCES (2017)

Add to Collection

Article Energy & Fuels

Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires

Wei Liu et al.

NATURE ENERGY (2017)

Add to Collection

Article Electrochemistry

Polycarbonates as alternative electrolyte host materials for solid-state sodium batteries

Jonas Mindemark et al.

ELECTROCHEMISTRY COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene oxide)

Dingchang Lin et al.

NANO LETTERS (2016)

Add to Collection

Review Chemistry, Physical

A review of lithium deposition in lithium-ion and lithium metal secondary batteries

Zhe Li et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Zr- and Hf-Based Metal-Organic Frameworks: Tracking Down the Polymorphism

Volodymyr Bon et al.

CRYSTAL GROWTH & DESIGN (2013)

Add to Collection

Article Chemistry, Physical

Enhanced electrochemical performance of poly(ethylene oxide) based composite polymer electrolyte by incorporation of nano-sized metal-organic framework

Changfu Yuan et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Bendable Inorganic Thin-Film Battery for Fully Flexible Electronic Systems

Min Koo et al.

NANO LETTERS (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Luminescent multifunctional lanthanides-based metal-organic frameworks

Joao Rocha et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.