☆ 4.6 Article

Chitosan as a Polyfunctional Crosslinker for a Renewable-Based Resorcinol Diglycidyl Ether

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Biochemistry & Molecular Biology

Biodegradable chitosan-graphene oxide as an affective green filler for improving of properties in epoxy nanocomposites

Mehdi Sharif et al.

Summary: In this study, the effect of biodegradable Chitosan-encapsulated Graphene Oxide (CGO) on the morphology and properties of epoxy composites was investigated. Various analytical techniques were used to examine the microstructure and properties of chitosan-GO and composites. Results showed that the distribution of fillers in the epoxy matrix was influenced by the CGO composition and its content. The strength of epoxy/CGOs composites was mainly affected by the loading level of CGO and the ratio of chitosan to GO, with nanocomposites containing CGO exhibiting a significant increase in elastic modulus and Tg of the composite.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Article Engineering, Environmental

Bio-Based Epoxy Resins of Epoxidized Soybean oil Cured with Salicylic acid Loaded with Chitosan: Evaluation of Physical-Chemical Properties

N. C. Nepomuceno et al.

Summary: In this study, compounds based on epoxidized soybean oil (ESO) were developed using salicylic acid (SAL) and 1, 3, and 5 wt% of chitosan (CHT). The chemical structures and curing mechanisms were evaluated using Fourier transformed infrared spectroscopy (FTIR). Thermal curing in the absence of catalyst was observed using differential scanning calorimetry (DSC). The obtained bio-resins exhibited high reactivity and reactions enthalpy at low CHT content (1% and 3%), and were characterized by their water uptake, swelling ratio, crosslink density, and thermal stability, indicating their potential applications in curatives or composite materials.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2023)

Add to Collection

Article Multidisciplinary Sciences

Collagen-chitosan-hydroxyapatite composite scaffolds for bone repair in ovariectomized rats

Erivelto Luis Chacon et al.

Summary: Lesions with bone loss may require autologous grafts or biomaterials for bone neoformation support. In this study, collagen/chitosan/hydroxyapatite scaffolds were used to investigate the osteoregenerative capacity in rats with hormone deficiency caused by ovariectomy. The results showed that the scaffolds stimulated bone growth, but the abnormal conditions of bone fragility caused by gonadal hormone deficiency may have delayed the bone repair process.

SCIENTIFIC REPORTS (2023)

Add to Collection

Review Biotechnology & Applied Microbiology

Metal ions and nanometallic materials in antitumor immunity: Function, application, and perspective

Feiyang Shen et al.

Summary: Even slight changes in the concentrations of metal ions can have amplified effects on signaling cascades that regulate tumor microenvironment and immune status, ultimately influencing the network of antitumor immunity. Metal ions are widely used in antitumor therapy as immune modulators due to their influence on cancer cell fate and participation in innate and adaptive immunity. Nanomedicine, with its precise delivery and responsive release capabilities, provides an ideal platform for the application of metal ions in cancer treatment, overcoming the disadvantages of low target selectivity and systemic toxicity.

JOURNAL OF NANOBIOTECHNOLOGY (2023)

Add to Collection

Article Chemistry, Applied

Eco-design and tunable structure-properties of chitosan-epoxy-glycerol-silicate biohybrids using integrated crosslinking

S. Shetranjiwalla et al.

Summary: Tunable structure-properties were achieved for chitosan-epoxy-glycerol-silicate (CHTGP) biohybrids via integrated amine-epoxy and waterborne sol-gel crosslinking reactions. The impact of crosslinking density on the structural morphology, thermal, mechanical, moisture-retention and antimicrobial properties of the biohybrids were characterized. The integrated biohybrids (CHTGP) exhibited improved thermal and mechanical stability and antibacterial activity.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Chemistry, Applied

Progress and prospects of polysaccharide-based nanocarriers for oral delivery of proteins/peptides

Haoyang Yuan et al.

Summary: The oral route is the most preferred route for drug delivery, and delivery systems using polysaccharides as materials show promise in overcoming the barriers of oral delivery. Polysaccharides can interact with proteins and facilitate the loading and release of proteins in the aqueous phase. They also provide functional properties such as mucoadhesiveness, pH-responsiveness, and prevention of enzymatic degradation. This review provides an overview of different types of polysaccharide-based nanocarriers, strategies to improve the bioavailability of orally administered proteins/peptides, and current restrictions and future trends of polysaccharide-based nanocarriers for oral delivery.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Chemistry, Applied

Preparation of biochar@chitosan-polyethyleneimine for the efficient removal of uranium from water environment

Yong Zhang et al.

Summary: A chitosan-based composite with rich active sites was synthesized by combining biochar, chitosan, and polyethyleneimine. The composite showed excellent adsorption performance for uranium(VI), with a high adsorption efficiency and capacity. It also demonstrated effectiveness in various water environments and met the permissible limits for uranium(VI) removal. Overall, this novel chitosan-based composite has great potential for remediating uranium(VI) contaminated wastewater.

CARBOHYDRATE POLYMERS (2023)

Add to Collection

Article Polymer Science

A new-type terephthalonitrile derivative flame retardant of bi-DOPO compound with hydroxyl and amino groups on epoxy resin

Yong Guo et al.

Summary: A new-type flame retardant DEZ was synthesized and used to prepare flame retardant epoxy resin composites. The addition of DEZ significantly improved the mechanical and flame retardant properties of the composites.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Chemistry, Applied

Synthesis, characterization, and biological evaluation of novel selenium-containing chitosan derivatives

Wanwen Chen et al.

Summary: This study introduces selenodiacetic acid to synthesize O-selenodiacetyl chitosan and chitosan-ammonium selenodiacetate, which show higher antioxidant activity and anticancer effect compared to chitosan.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Chitosan-based materials: Preparation, modification and application

Jianlong Wang et al.

Summary: Chitosan is a natural biopolymer with a modifiable structure and abundant functional groups, making it suitable for various applications. This review analyzes and summarizes recent advances in chitosan-based materials, particularly focusing on the modification of chitosan by physical, chemical, and biological methods. The review provides plentiful information on the preparation, characterization, and application of chitosan-based materials, including various preparation and modification methods for improving chitosan performances.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Polymer Science

Epoxy resin modified with chitosan derivatives and DOPO: Improved flame retardancy, mechanical properties and transparency

Chenyu Zhou et al.

Summary: In this study, a fast char-forming flame retardant was synthesized and added into epoxy resin to improve its flame retardant efficiency while maintaining its good properties. The modified epoxy resin showed significantly improved flame retardancy and maintained comparable mechanical properties with pure epoxy resin. The convenient preparation method and small addition amount of the flame retardant provide a promising solution for industrial applications.

POLYMER DEGRADATION AND STABILITY (2022)

Add to Collection

Article Environmental Sciences

Recent Advances in Bio-Based Additive Flame Retardants for Thermosetting Resins

Adriana Dowbysz et al.

Summary: This study summarizes recent progress on bio-based flame retardants for thermosetting resins, focusing on their thermal degradation, limiting oxygen index, and fire behavior, and finds that the mode of action is mostly based on the forming of the char layer.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

Add to Collection

Review Polymer Science

Chitosan as a Tool for Sustainable Development: A Mini Review

Soundouss Maliki et al.

Summary: New developments require innovative ecofriendly materials with biocompatibility, biodegradability, and versatility. Chitosan, the second most abundant material in the world, has unique properties that can be used for various purposes, promoting the design and development of sustainable materials. For example, it can be used as an alternative for food packaging or in sustainable agriculture. Chitosan can also reduce pollution in other industrial processes. This review highlights important advances in the sustainable use of chitosan for promoting circular economy.

POLYMERS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

High content chitosan-based materials with high performance properties

Iolanda Fustes-Damoc et al.

Summary: Chitosan can react with trisaromatic tris-epoxy monomer to produce thermoset materials with outstanding properties. By mixing chitosan in its solid form, the need for solvents and additional processing steps is eliminated.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Chemistry, Physical

Chitosan functionalized hexagonal boron nitride nanomaterial to enhance the anticorrosive performance of epoxy resin

Haidong Chen et al.

Summary: In this study, a simple method was used to load KH550 modified CS on the surface of HBN modified with PDA, resulting in the preparation of HP-CS material, which was added into epoxy resin to fabricate a high-efficiency anti-corrosion coating. The test results showed that HP-CS/EP coating exhibited good corrosion resistance with a high impedance modulus.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Food Science & Technology

Effects of molecular weight of chitosan in a blend with polycaprolactone and grapefruit seed extract for active packaging and biodegradation

Berlinda Kwee Hong Lim et al.

Summary: Packaging films were developed by blending polycaprolactone (PCL) with chitosan as carrier for grapefruit seed extract (GSE). The use of lower molecular weight (MW) chitosan accelerated the release of GSE, improving plasticization, hydrophilicity, and inhibition of the growth of Escherichia coli. Biodegradation of the films in soil compost showed that films with lower MW chitosan exhibited faster rates of degradation, while the decline in molecular weight was similar among all blended films. The formulation of PCL/GSE using lower MW chitosan shows promise in enhancing biodegradation and antimicrobial efficacy of packaging films.

FOOD PACKAGING AND SHELF LIFE (2022)

Add to Collection

Review Polymer Science

Chitosan: A Sustainable Material for Multifarious Applications

Abdul Zubar Hameed et al.

Summary: Chitosan, derived from marine crustacean waste, is gaining importance in various applications due to its versatile features and capabilities. It possesses antibacterial, biocompatible, and biodegradable properties, making it suitable for pharmaceutical, water filtration, agriculture, and cosmetic industries.

POLYMERS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Di-cationic epoxy resin one-step crosslinked chitosan/cellulose hydrogel for efficient dye and oily wastewater remediation

Daikun Li et al.

Summary: In this study, a novel di-cationic epoxy resin cross-linker was successfully synthesized to obtain chitosan/cellulose hydrogels. The hydrogels exhibited a microporous structure with a large number of quaternary ammonium groups, and showed high adsorption efficiency for Congo red in a wide pH range. Additionally, the hydrogel-coated fabric demonstrated good oil resistance and efficient separation of oil/water mixtures.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Review Biochemistry & Molecular Biology

Selected Applications of Chitosan Composites

Kunal Pal et al.

Summary: Chitosan is an emerging material with a focus on biomaterial, biomedical, cosmetic, and packaging applications. Research shows that the inherent antioxidant and antimicrobial properties of chitosan, along with its biodegradability and safety, make it favorable for developing biodegradable food packaging systems. Food researchers are utilizing the properties of chitosan to enhance packaging system properties through additives or blending with other polymers.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Fibrous chitosan cellulose composite as an efficient adsorbent for Co(II) removal

Shuting Zhuang et al.

Summary: In this study, fibrous chitosan/cellulose composite was prepared using the wet-spinning method to increase its specific surface area, thus enhancing the adsorption capacity towards Co(II). The as-prepared fibrous composite showed a homogeneous fiber structure and high specific surface area, leading to a significant improvement in Co(II) adsorption capacity. The adsorption kinetic behavior followed the pseudo second-order kinetic model, and the amino groups along with hydroxyl groups played a dominant role in Co(II) coordination and adsorptive removal.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Polymer Science

Advances in sustainable thermosetting resins: From renewable feedstock to high performance and recyclability

Jingkai Liu et al.

Summary: The development of sustainable thermosetting resins is a contemporary research objective, requiring renewable feedstocks, comprehensive properties, and recyclability. This systematic overview discusses recent advances in bio-based thermosetting resins, including the application of bio-based platform compounds, synthesis of typical bio-based thermosets, and strategies for recycling waste products.

PROGRESS IN POLYMER SCIENCE (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Biomimetic structure of chitosan reinforced epoxy natural rubber with self-healed, recyclable and antimicrobial ability

Yumin Wu et al.

Summary: This study developed a self-healed, recyclable, and antimicrobial elastomers material, which showed excellent mechanical properties and antibacterial effects through specific reaction combination.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Review Polymer Science

Antimicrobial Biodegradable Food Packaging Based on Chitosan and Metal/Metal-Oxide Bio-Nanocomposites: A Review

Amin Babaei-Ghazvini et al.

Summary: Biodegradable polymers, particularly chitosan-based packaging materials, have attracted attention due to their biodegradability, non-toxic nature, and antimicrobial properties.

POLYMERS (2021)

Add to Collection

Review Biochemistry & Molecular Biology

Chitosan as an environment friendly biomaterial - a review on recent modifications and applications

Prasanna S. Bakshi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Thermodynamics

Dual curing of an epoxy resin with dicarboxylic acids

J. M. Morancho et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Chemistry, Applied

Synthesis of chitosan-based flame retardant and its fire resistance in epoxy resin

Rui Chen et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Food Science & Technology

Recent advances on chitosan-based films for sustainable food packaging applications

Hossein Haghighi et al.

FOOD PACKAGING AND SHELF LIFE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Ultra-Tough, Strong, and Defect-Tolerant Elastomers with Self-Healing and Intelligent-Responsive Abilities

Yong Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Polymer Science

The Effect of PEGDE Concentration and Temperature on Physicochemical and Biological Properties of Chitosan

Martha Gabriela Chuc-Gamboa et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Applied

Preparation of polyethylene glycol diglycidyl ether (PEDGE) crosslinked chitosan/activated carbon composite film for Cd2+ removal

Rahmi et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Polymer Science

Amino acid-cured bio-based epoxy resins and their biocomposites with chitin- and chitosan-nanofibers

Mitsuhiro Shibata et al.

EUROPEAN POLYMER JOURNAL (2018)

Add to Collection

Article Polymer Science

Biomaterials Based on Electrospun Chitosan. Relation between Processing Conditions and Mechanical Properties

Christian Enrique Garcia Garcia et al.

POLYMERS (2018)

Add to Collection

Article Engineering, Chemical

Mechanism and Kinetics of Curing of Diglycidyl Ether of Bisphenol A (DGEBA) Resin by Chitosan

Praveen Kumar Balasubramani et al.

POLYMER ENGINEERING AND SCIENCE (2017)

Add to Collection

Review Environmental Sciences

Removal of various pollutants from water and wastewater by modified chitosan adsorbents

Jianlong Wang et al.

CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Polymer Science

Influence of chitosan and epoxy cross-linking on physical properties of binary blends

Saira Jabeen et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)

Add to Collection

Article Chemistry, Applied

Improvement of corrosion resistance, antimicrobial activity, mechanical and chemical properties of epoxy coating by loading chitosan as a natural renewable resource

M. Abd El-Fattah et al.

PROGRESS IN ORGANIC COATINGS (2016)

Add to Collection

Review Pharmacology & Pharmacy

Chitosan as a starting material for wound healing applications

V. Patrulea et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)

Add to Collection

Article Agricultural Engineering

Chitosan-based biosorbents: Modification and application for biosorption of heavy metals and radionuclides

Jianlong Wang et al.

BIORESOURCE TECHNOLOGY (2014)

Add to Collection

Article Polymer Science

Theoretical modeling of the effect of proton donors and regeneration reactions in the network build-up of epoxy thermosets using tertiary amines as initiators

Xavier Fernandez-Francos

EUROPEAN POLYMER JOURNAL (2014)

Add to Collection

Article Food Science & Technology

Influence of acetylation degree and molecular weight of homogeneous chitosans on antibacterial and antifungal activities

Islem Younes et al.

INTERNATIONAL JOURNAL OF FOOD MICROBIOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Chitosan: a highly efficient renewable and recoverable bio-polymer catalyst for the expeditious synthesis of α-amino nitriles and imines under mild conditions

Mohammad G. Dekamin et al.

GREEN CHEMISTRY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Properties and Morphological Characterization of PLA/Chitosan/Epoxidized Natural Rubber Composites

Zainoha Zakaria et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2013)

Add to Collection

Article Polymer Science

Synthesis and Properties of Biobased Epoxy Resins. Part 1. Glycidylation of Flavonoids by Epichlorohydrin

Helene Nouailhas et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)

Add to Collection

Review Polymer Science

Chitosan-A versatile semi-synthetic polymer in biomedical applications

M. Dash et al.

PROGRESS IN POLYMER SCIENCE (2011)

Add to Collection

Review Materials Science, Multidisciplinary

Properties and degradation of selected polysaccharides: hyaluronan and chitosan

M. Rinaudo

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Review Polymer Science

Chitin and chitosan: Properties and applications

Marguerite Rinaudo

PROGRESS IN POLYMER SCIENCE (2006)

Add to Collection

Article Engineering, Chemical

Homopolymerization of epoxy monomers initiated by 4-(dimethylamino)pyridine

IE Dell'Erba et al.

POLYMER ENGINEERING AND SCIENCE (2006)

Add to Collection

Article Polymer Science

A kinetic study of thermal degradations of chitosan/polycaprolactam blends

SK Liao et al.

MACROMOLECULAR RESEARCH (2004)

Add to Collection

Article Biochemistry & Molecular Biology

Controlled chemical modifications of chitosan.: Characterization and investigation of original properties

R Auzély et al.

MACROMOLECULAR BIOSCIENCE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.