Related references
Note: Only part of the references are listed.
Article
Energy & Fuels
Yulia F. Chirkova et al.
Summary: In recent years, interest in gas hydrates has grown due to their potential as an energy source and environmentally friendly alternative to storing and transporting natural gas. This study compared the effectiveness of sulfonated castor oil (SCO) and sodium dodecyl sulfate (SDS) as promoting reagents in the formation and decomposition of methane and methane-propane hydrates in a porous medium. The results showed that SCO significantly improved the water conversion rate in methane hydrates due to enhanced mass transfer in the presence of surfactants, while the effect on methane-propane hydrates was limited. Both SCO and SDS accelerated hydrate formation, but SCO required less supercooling. These findings suggest that SCO is comparable to SDS in promoting activity in porous media with varying water saturation.
Review
Polymer Science
Chowdhury Sakib-Uz-Zaman et al.
Summary: The conventional manufacturing methods for O&P devices have been practiced for a long time, but recently there has been exploration of advanced manufacturing techniques in this field. This paper provides a mini review on the use of polymer-based additive manufacturing for O&P devices, gathering insights from professionals in the industry. The study shows that AM techniques have lower manufacturing costs, improved efficiency in design and fabrication, and comparable functionality and patient satisfaction, but concerns remain about materials and structural strength.
Review
Polymer Science
Adriana Torres-Mansilla et al.
Summary: The physicochemical features of the avian eggshell membrane have a crucial role in calcium carbonate deposition and shell mineralization, resulting in a highly porous mineralized tissue with excellent mechanical properties and biological functions. The eggshell membrane can serve as a bi-dimensional scaffold for bone-regenerative materials. It is cost-effective and widely available as a waste byproduct, making it suitable for repurposing in bone bio-material manufacturing.
Article
Energy & Fuels
Ye Zhang et al.
Summary: Gas storage technologies are important for energy security and resilience. The use of clathrate hydrates, specifically Solidified Natural Gas (SNG), for natural gas storage is attractive due to its non-explosive nature and high volume density. Recent research has shown that the additive 1,3-dioxolane (DIOX) can improve the thermodynamic and kinetic performance of hydrate formation.
Article
Chemistry, Multidisciplinary
Wenfeng Hu et al.
Summary: This study elucidates the nucleation path of methane hydrate through molecular dynamics simulations. The results reveal that methane molecules aggregate in a three-body pattern, which is the key step in gas hydrate formation.
COMMUNICATIONS CHEMISTRY
(2022)
Article
Polymer Science
Semyon I. Koltsov et al.
Summary: In this paper, a modification of a commercially available printer was reported for the extrusion printing of hydrogels. The study demonstrated the possibility of high-precision printing of polymer hydrogels using plastic 3D printing on the modified printer. This method has potential applications in education and industry.
Article
Chemistry, Multidisciplinary
Yinghua Gong et al.
Summary: The growth and decomposition of methane hydrate in cellulose-based materials were studied. Cellulose microfibrils and their composite with polyacrylamide were found to be efficient carriers for methane hydrate formation and storage.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Review
Engineering, Chemical
Seyed Mohammad Montazeri et al.
Summary: Desalination processes are essential for addressing the energy-water-environment nexus and water scarcity globally. Hydrate based desalination (HBD) is an innovative method that can efficiently desalinate various salinity streams and recover clean water in the form of gas hydrates. HBD shows strong potential as an energy efficient and selective desalination method, contributing to the overall sustainability of the energy-water-environment nexus.
Article
Chemistry, Physical
Huiyong Liang et al.
Summary: This study used in situ high-resolution X-ray computed tomography measurements to explore the mechanisms of hydrate growth in the presence of surfactants. It was found that the presence of hydrate crystals triggered enhanced growth on the reactor wall. A time delay was observed before the bulk water reservoir transformed into hydrate. The lower interfacial tension between the hydrate surface and the solution facilitated its adsorption onto the reactor wall. These fundamental results are valuable for understanding the mechanism of hydrate growth in the presence of surfactants and its potential applications.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Energy & Fuels
Sadegh Karimpouli et al.
Summary: Digital Rock Physics has opened up a new avenue for more detailed inferences by exploring the microscale world of rocks. Recent advances in Machine Learning and Convolutional Neural Networks have improved the ability to generate high-resolution images from low-resolution counterparts. This study proposes a multiscale approach and introduces an efficient network, SRDUN, which performs accurately for small scale-differences but becomes more complex for high scale-differences. A multistep procedure is proposed to address this issue and is shown to produce more reliable results for computations of reservoir parameters. The direct approach performs better for morphometric properties, while the multistep procedure preserves pore size distribution better.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
(2022)
Article
Multidisciplinary Sciences
Judit Farrando-Perez et al.
Summary: This study demonstrates the rapid formation of hydrogen clathrates using specially designed activated carbon materials as nanoreactors. The confinement effects in the inner cavities of activated carbon promote the massive growth of hydrogen hydrates at moderate temperatures, using pure water, with extremely fast kinetics and much lower pressures than the bulk system.
NATURE COMMUNICATIONS
(2022)
Article
Chemistry, Multidisciplinary
Liang Yang et al.
Summary: This article studied the kinetics of methane hydrate formation in wet wood shavings and found that wet multi-stack shaving beds provided abundant channels and nucleation sites, which accelerated the formation and growth of hydrates.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Article
Polymer Science
Zhengkun Chen et al.
Summary: Fibrous biological tissues exhibit structural anisotropy due to fiber alignment, which affect cell proliferation, orientation, and mobility. In this study, a chemically crosslinked fibrous hydrogel was created by reacting aldehyde-modified cellulose nanofibers with gelatin. Structural anisotropy was induced by extruding the hydrogel precursor through different printheads, and the degree of anisotropy was controlled by ink composition and flow rate. The anisotropy of the hydrogel affected the orientation of dermal fibroblasts. This straightforward method for constructing fibrillar hydrogel scaffolds with structural anisotropy can be used to study the biological impact of tissue anisotropy.
Article
Engineering, Environmental
Anton N. Petukhov et al.
Summary: This study presents a comprehensive theoretical and experimental evaluation of the effect of distribution coefficients on the process of capturing carbon dioxide from flue gas through hydrate crystallization. The research investigates various modes of separation and demonstrates that using a two-stage hydrate membrane technology can significantly reduce the cost of capture and increase CO2 recovery.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2022)
Article
Chemistry, Multidisciplinary
Sofia M. Morozova et al.
Summary: This study explores functional nanocolloidal hydrogels formed by differently sized and charged latex nanoparticles, investigating their shear-thinning, self-healing properties, and the mechanical properties of the printed films. The nanoparticles are functionally achieved by covalently labeling them with different fluorescent dyes, allowing for a facile route for multicolor fluorescence patterns in 3D printing.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Energy & Fuels
Lev S. Podenko et al.
Summary: The study found that the new water-containing material PPVACG showed high rate and conversion ratio for gas hydrate formation, as well as increased stability and methane uptake capacity in repeated cycles compared to traditional systems.
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING
(2021)
Article
Biochemistry & Molecular Biology
Mengdi Pan et al.
Summary: This study investigates the formation process of mixed gas hydrates in Qilian Mountain permafrost. The results demonstrate the effects of gas flow on the composition of the resulting hydrate phase, with no coexisting hydrate phases formed despite significant changes in the gas composition.
Article
Chemistry, Multidisciplinary
Stian Almenningen et al.
Summary: This study investigated the growth pattern and rate of CH4 hydrate in sandstone pores using a high-pressure micromodel. CH4 hydrate predominantly formed and grew along the gas-water interface, with different growth rates identified in different directions. The results can be used as input for numerical models simulating pore-scale CH4 hydrate growth behavior.
CRYSTAL GROWTH & DESIGN
(2021)
Article
Thermodynamics
Xuan Kou et al.
Summary: The growth habits of natural gas hydrates are influenced by the gas occurrence pattern, with grain-attaching hydrates forming in the presence of free gas and dispersed and dendritic hydrates forming in the presence of dissolved gas. Changes in gas solubility and gas diffusion are crucial factors that affect the growth habits and morphology of gas hydrates.
Article
Energy & Fuels
Runcheng Zhang et al.
Summary: The efficiency of hydrate formation in wet porous media was improved by increasing the exposure of the activated carbon bed, leading to fast hydrate nucleation and large methane uptake. The relationship between fluid dynamics and mass transfer during hydrate formation process was fully demonstrated by the phenomenon of rapid hydrate nucleation and significant methane absorption.
Article
Chemistry, Physical
Shurraya Denning et al.
Summary: The synergistic effect of combining gas hydrates with the novel porous organic cage CC3 for methane storage was demonstrated using a high-pressure differential scanning calorimeter. The addition of CC3 significantly improved methane hydrate formation and increased methane storage capacity.CC3 displayed remarkable stability, recyclability, and enhanced performance in promoting methane hydrate formation to achieve a high capacity for methane storage.
JOURNAL OF PHYSICAL CHEMISTRY C
(2021)
Article
Biochemistry & Molecular Biology
Florian Filarsky et al.
Summary: This paper describes the development of a rapid gas hydrate production process, which uses coupled spraying with stirring for the fastest hydrate formation and highest gas uptakes. Extensive experimental series using different gas compositions were conducted, achieving high storage capacities, formation rates, and separation efficiencies.
Article
Chemistry, Multidisciplinary
Zihua Shao et al.
Summary: Hydrate dissociation inhibition is crucial for drilling in hydrate-bearing sediments, and modified cellulose as an inhibitor showed increased dissociation time and enhanced adsorption capacity on methane hydrate surfaces. Molecular dynamics simulations revealed that the aminosilane chain acted as the adsorption group, leading to a smaller diffusion coefficient of the modified cellulose.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2021)
Article
Energy & Fuels
Thi Xiu Le et al.
Summary: This study used high-resolution optical microscopy and synchrotron X-ray computed tomography to observe methane hydrate growth in marine sandy sediments, revealing previously unidentified features such as hollow filaments and Haines jumps. These techniques allowed for detailed observations at spatial scales below the pore size and temporal scales below 1 s, providing valuable insights into the growth processes of methane hydrate.
Article
Chemistry, Multidisciplinary
Mehrdad Vasheghani Farahani et al.
Summary: This study investigates the evolution of gas hydrate-bearing permafrost sediments against environmental temperature change. Experimental results reveal the influence of complex pore-scale factors on elastic wave velocities and effective thermal conductivity (ETC). The research emphasizes the importance of distinguishing between ice and gas hydrates in frozen sediments for accurate quantification of natural gas hydrate as a sustainable energy resource.
Review
Chemistry, Multidisciplinary
Andrey Yu Manakov et al.
Summary: The review covers research and engineering works in the fields of physical chemistry of gas hydrates and gas hydrate technologies over the last 10715 years. It discusses hydrate structures, formation kinetics, phase diagrams, and methods for hydrate calculation. Technological applications, such as gas storage and transportation, are also explored.
RUSSIAN CHEMICAL REVIEWS
(2021)
Article
Chemistry, Physical
Mehrdad Vasheghani Farahani et al.
Summary: A study using magnetic resonance imaging was conducted to explore the kinetics and spatial characteristics of thermally induced methane hydrate formation in synthetic and natural sediment samples. The results showed that the first cycle of formation/dissociation had an impact on subsequent cycles, with differences observed in the behavior of natural and synthetic sediment samples during cyclic hydrate formation/dissociation.
SUSTAINABLE ENERGY & FUELS
(2021)
Article
Chemistry, Multidisciplinary
Yuri Em et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2020)
Article
Energy & Fuels
Linxian Gong et al.
Article
Nanoscience & Nanotechnology
Shurraya Denning et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Review
Chemistry, Multidisciplinary
Aliakbar Hassanpouryouzband et al.
CHEMICAL SOCIETY REVIEWS
(2020)
Article
Engineering, Chemical
Zheng Rong Chong et al.
Article
Engineering, Chemical
Florian Filarsky et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2019)
Article
Engineering, Chemical
Florian Filarsky et al.
CHEMIE INGENIEUR TECHNIK
(2019)
Review
Materials Science, Ceramics
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
(2019)
Article
Engineering, Chemical
Abhishek Nambiar et al.
Proceedings Paper
Energy & Fuels
Florian Filarsky et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS
(2019)
Article
Engineering, Environmental
Aliakbar Hassanpouryouzband et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY
(2018)
Article
Thermodynamics
Andrey S. Stoporev et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
(2018)
Review
Green & Sustainable Science & Technology
Chunfeng Song et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2018)
Article
Energy & Fuels
Zhen Pan et al.
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING
(2018)
Article
Thermodynamics
Tatiana P. Adamova et al.
THERMOCHIMICA ACTA
(2018)
Review
Engineering, Multidisciplinary
Qian Yan et al.
Article
Chemistry, Physical
Meng Xu et al.
EUROPEAN PHYSICAL JOURNAL E
(2018)
Review
Chemistry, Multidisciplinary
Andrey Yu. Manakov et al.
RUSSIAN CHEMICAL REVIEWS
(2017)
Review
Engineering, Multidisciplinary
Xin Wang et al.
COMPOSITES PART B-ENGINEERING
(2017)
Review
Energy & Fuels
Zheng Rong Chong et al.
Article
Chemistry, Multidisciplinary
Abhishek Nambiar et al.
CANADIAN JOURNAL OF CHEMISTRY
(2015)
Article
Chemistry, Multidisciplinary
Kazuki Imasato et al.
CRYSTAL GROWTH & DESIGN
(2015)
Article
Geochemistry & Geophysics
Yi Zhang et al.
GEOPHYSICAL JOURNAL INTERNATIONAL
(2014)
Article
Chemistry, Multidisciplinary
JD Lee et al.
CRYSTAL GROWTH & DESIGN
(2006)
