☆ 4.7 Article

Boron Adsorption Using NMDG-Modified Polypropylene Melt-Blown Fibers Induced by Ultraviolet Grafting

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Polyaniline-decorated Macadamia nutshell composite: an adsorbent for the removal of highly toxic Cr(VI) and efficient catalytic activity of the spent adsorbent for reuse

Opeoluwa Adeiga et al.

Summary: A novel polyaniline-decorated lignocellulose composite adsorbent, MNS-PANI, was prepared and showed high efficiency in the uptake of Cr(VI). The adsorption behavior of MNS-PANI was well-described by pseudo-second-order kinetics and Langmuir isotherm models, with endothermic and spontaneous uptake of Cr(VI). Moreover, the spent adsorbent exhibited efficient photocatalytic degradation of ciprofloxacin.

POLYMER BULLETIN (2023)

Add to Collection

Article Materials Science, Paper & Wood

Poly (methyl methacrylate) grafted wheat straw for economical and eco-friendly treatment of oily wastewater

Kavya Suresh et al.

Summary: This study enhanced the oil adsorption efficiency of agricultural waste biomass wheat straw (WS) by grafting biocompatible poly(methyl methacrylate) (PMMA), and developed a cost-effective and eco-friendly adsorbent for the treatment of oily wastewater.

CELLULOSE (2022)

Add to Collection

Article Engineering, Environmental

Optimizing interfacial polymerization with UV-introduced photo-fries rearrangement for enhancing RO membrane performance

Chong Wang et al.

Summary: A novel method involving UV irradiation was proposed in this study to improve the performance of polyamide thin film composite (PA-TFC) membrane, leading to enhanced water flux, selectivity, and anti-fouling performance. By adjusting material concentrations and reaction time, the method demonstrated the potential to further enhance membrane performance, indicating its potential for industrial applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Unveiling the nature of boric acid adsorption by metal-organic frameworks with hexanuclear clusters

Ben Wu et al.

Summary: With the rapid development of industries, there is a growing demand for boric acid, but the world is also facing the issue of boron-containing wastewater. Metal-organic frameworks (MOFs), known for their exceptional stability and large surface area, have been identified as effective adsorbents for boron. In this study, Zr-6/Hf-6-based NU-1008 and NU-903 were investigated for their ability to remove boron from water. The results showed that Hf-6-based MOFs had a higher capacity for boron adsorption compared to Zr-6-based MOFs, which can be attributed to the weaker electronegativity of hafnium. Single crystal X-ray diffraction revealed the precise binding sites of boron on the MOFs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Applied

Boron removal by glucamine-functionalized inverse vulcanized sulfur polymer

Amin Abbasi et al.

Summary: This study reports a novel sulfur-based boron selective adsorbent for boron removal, showing optimal adsorption capacity at pH 9. The regenerated adsorbent demonstrated good reusability after multiple cycles. Additionally, the study highlights the cost-effectiveness of utilizing elemental sulfur for efficient boron reduction in water.

REACTIVE & FUNCTIONAL POLYMERS (2022)

Add to Collection

Article Chemistry, Physical

Surface modification of polypropylene non-woven filter by O2 plasma/ acrylic acid enhancing Prussian blue immobilization for aqueous cesium adsorption

Narges Dehbashi Nia et al.

Summary: This study successfully modified a polypropylene non-woven filter with O-2 plasma treatment and acrylic acid to enhance cesium adsorption, achieving a promising means for advanced water treatment filters.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Highly Hydrophobic and Superhydrophobic Coatings Based on Linseed Oil and Copolymers of Glycidyl Methacrylate and (Fluoro)Alkyl Methacrylates for Wood Surfaces

O. Kolyaganova et al.

Summary: This paper discusses the formation of hydrophobic coatings on pinewood surface using linseed oil and copolymers of glycidyl methacrylate and (fluoro)alkyl methacrylates. It shows the potential to achieve a superhydrophobic state with contact angles as large as 154 degrees. The modified wood exhibits stable water-repellent properties, reducing moisture sorption and water absorption coefficient.

COLLOID JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis, characterization, and application of functionalized pillar[5]arene silica gel (Si-APTMS-pillar[5]arene) adsorbent for selectivity and effective removal of Cu(II) ion

Ali Bilgic et al.

Summary: This study introduces a new adsorbent, Si-APTMS-pillar[5]arene, which is a modified silica gel used as a solid support. It has a high efficiency in removing Cu(II) ions from water, with high selectivity and good reusability.

JOURNAL OF MATERIALS RESEARCH (2022)

Add to Collection

Article Food Science & Technology

Ultraviolet-cured p-phenylenediamine functionalized polypropylene film as a non-migratory antioxidant

Kambiz Sadeghi et al.

Summary: Ultraviolet induced modification is a simple technique to transform the inert materials into functional materials, which has great potential applications in packaging, cosmetic, and biomedical fields.

FOOD PACKAGING AND SHELF LIFE (2022)

Add to Collection

Article Construction & Building Technology

The surface modification of extruded polystyrene foams through UV curing and its stable adhesion to mortar

Wanfu Wang et al.

Summary: The hydrophobic surface of extruded polystyrene foams (XPSF) was modified with UV curable adhesives containing epoxy acrylate resin, acrylic acid, and butyl acrylate (EAB) to enhance bonding strength (BS) with mortar. Further introduction of 3-aminopropyltriethoxysilane (APTES) into EAB formed water-resistant coatings, leading to optimized BS values in both dry and wet states. The bonding mechanism showed a chemical bond between the modified XPSF and mortar.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Polymer Science

UV Photoinitiated Temperature-Sensitive Modification of Polypropylene Grafted with Poly(N-isopropylacrylamide)

X. C. Zheng et al.

Summary: Poly(N-isopropylacrylamide) was grafted onto the surface of polypropylene using a two-step surface photo-grafting method. The graft-copolymer showed temperature sensitivity and hydrophilic/hydrophobic properties. The grafting rate could be controlled by adjusting the initiator concentration, monomer concentration, photoreduction time, and light exposure time.

POLYMER SCIENCE SERIES B (2022)

Add to Collection

Article Environmental Sciences

Anaerobic fermentation treatment improved Cd2+ adsorption of different feedstocks based hydrochars

Haibin Fu et al.

Summary: Hydrothermal carbonization technology and anaerobic fermentation technology have gained attention in recent years for their ability to improve surface properties and enhance adsorption capacity of carbon materials. Through experiments on wheat straw and poplar sawdust hydrochars, it was found that anaerobic fermentation significantly improved the adsorption capacity, with a more pronounced effect on wheat straw hydrochar.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Physical

Surface modification of Polypropylene Nonwoven by plasma and 13-Cyclodextrin: Optimization and cationic dye removal studies

Aminoddin Haji et al.

Summary: Polypropylene nonwoven fabric was modified by grafting beta-cyclodextrin using a pad-dry-cure process with citric acid and sodium hypophosphite as crosslinking agent and catalyst. Plasma treatment was utilized to enhance wettability and loading of beta-cyclodextrin. Optimum conditions for achieving maximum weight gain and dye removal efficiency were determined by investigating various process variables. The adsorbent prepared showed best fit with Freundlich isotherm and Pseudo-second order kinetic models for the removal of Basic Blue 3 from aqueous media.

SURFACES AND INTERFACES (2021)

Add to Collection

Article Polymer Science

Removal of Mercury (II) from Aqueous Solution Using Silver Nanocomposite: Synthesis and Adsorption Mechanism

Manal F. Abou Taleb et al.

Summary: This study successfully utilized radiation synthesized nanocomposites to adsorb mercury from wastewater, with characterization techniques showing the best adsorption efficiency at a pH of 5. The pseudo-second order model provided the best fit for the adsorption kinetics, indicating spontaneous exothermic processes and a physisorption reaction.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Add to Collection

Article Chemistry, Analytical

Purification of thorium by precipitation

Guo-long Guo et al.

Summary: A precipitation method was used to produce high-purity thorium product from industrial grade Th(NO3)(4)•4H(2)O, with control over pH, hydrogen peroxide content, calcination temperature, and time. The resulting thorium product had a purity exceeding 99.8%.

JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY (2021)

Add to Collection

Article Engineering, Environmental

Quantitative analysis on the mechanism of Cd2+ removal by MgCl2-modified biochar in aqueous solutions

Guangcai Yin et al.

Summary: The modification of biochar with MgCl2 enhanced its specific surface area and pore volume, improving its adsorption capacity for Cd2+ removal from aqueous solutions. The main mechanisms of Cd2+ removal by MBC were Cd(OH)(2) precipitation, ion exchange, and Cd2+-pi interaction, with minor contributions from functional group complexation, electrostatic attraction, and physical adsorption.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

An updated review on boron removal from water through adsorption processes

Sneha Bhagyaraj et al.

Summary: This review discusses the importance of boron, its contamination sources, and recent advances in boron removal methods based on adsorption. The adsorbents for deboronation are classified based on functional groups, and the reaction mechanisms of each system are comprehensively addressed, along with a summary of progress in the field over the past 5 years. Techniques for characterizing deboronation studies, suggestions for future research and applications, and possible improvements to existing systems are also presented.

EMERGENT MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Glycidol-functionalized macroporous polymer for boron removal from aqueous solution

Qinglong Luo et al.

REACTIVE & FUNCTIONAL POLYMERS (2020)

Add to Collection

Article Environmental Sciences

Removal of boron from water by GO/ZIF-67 hybrid material adsorption

Guangzhuang Hu et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Chemistry, Applied

Plasma polymerization mediated construction of surface ion-imprinted polypropylene fibers for the selective adsorption of Cr(VI)

Zhengwei Luo et al.

REACTIVE & FUNCTIONAL POLYMERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Surface modification of polypropylene with porous polyacrylamide/polydopamine composite coating

Jidong Dai et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Engineering, Chemical

A novel chitosan based adsorbent for boron separation

Qiang Wu et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Extremely Effective Boron Removal from Water by Stable Metal Organic Framework ZIF-67

Jingli Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Effect of Temperature on the Kinetics of the Sorption of Strontium Cations by a Sorbent Based on Titanium Phosphate

M. Maslova et al.

RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Solid phase epitaxial thickening of boron and phosphorus doped polycrystalline silicon thin films formed by aluminium induced crystallization technique on glass substrate

O. Tuzun Ozmen et al.

THIN SOLID FILMS (2019)

Add to Collection

Article Plant Sciences

Altered plant organogenesis under boron deficiency is associated with changes in high-mannose N-glycan profile that also occur in animals

Maria Reguera et al.

JOURNAL OF PLANT PHYSIOLOGY (2019)

Add to Collection

Article Chemistry, Physical

EPDM Rubber with hexagonal Boron Nitride: A Thermal Neutron Shielding Composite

A. Gungor et al.

RADIATION PHYSICS AND CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Functionalized Porous Aromatic Frameworks as High-Performance Adsorbents for the Rapid Removal of Boric Acid from Water

Jovan Kamcev et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Preparation of durable flame retardant PAN fabrics based on amidoximation and phosphorylation

Yue Zhang et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Polymer Science

Zirconium-chitosan hydrogel beads for removal of boron from aqueous solutions

Joanna Kluczka et al.

POLYMER (2018)

Add to Collection

Review Biochemistry & Molecular Biology

The vital roles of boron in animal health and production: A comprehensive review

Sameh A. Abdelnour et al.

JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Extraction of boron from salt lake brine using 2-ethylhexanol

Ran Zhang et al.

HYDROMETALLURGY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Boronate affinity materials for separation and molecular recognition: structure, properties and applications

Daojin Li et al.

CHEMICAL SOCIETY REVIEWS (2015)

Add to Collection

Article Engineering, Chemical

Boron removal using chelating resins with pyrocatechol functional groups

Boyang Wang et al.

DESALINATION (2014)

Add to Collection

Article Materials Science, Textiles

Surface Modification of Microporous Polypropylene Membrane by UV-initiated Grafting with Poly(Ethylene Glycol) Diacrylate

Mark Andrew Chan et al.

FIBERS AND POLYMERS (2014)

Add to Collection

Article Engineering, Chemical

Fabrication of Multiwalled Carbon Nanotube/Polypropylene Conductive Fibrous Membranes by Melt Electrospinning

Li Cao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Add to Collection

Article Engineering, Chemical

Boron removal in new generation reverse osmosis (RO) membranes using two-pass RO without pH adjustment

Ali Farhat et al.

DESALINATION (2013)

Add to Collection

Article Engineering, Chemical

Surface mechanism of the boron adsorption on alumina in aqueous solutions

Antri Demetriou et al.

DESALINATION AND WATER TREATMENT (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of Reduced Graphene Oxide/Poly(acrylamide) Nanocomposite and Its Adsorption of Pb(II) and Methylene Blue

Yongfang Yang et al.

LANGMUIR (2013)

Add to Collection

Article Materials Science, Textiles

Polypropylene fibers modified by polyvinyl alcohol and montmorillonite

Zuzana Strecka et al.

JOURNAL OF THE TEXTILE INSTITUTE (2010)

Add to Collection

Article Polymer Science

Improving the flame retardancy of PET fabric by photo-induced grafting

Lihua Yu et al.

POLYMER DEGRADATION AND STABILITY (2010)

Add to Collection

Article Engineering, Environmental

Kinetics of zinc ions removal from effluents using ion exchange resin

Tsz-Him Shek et al.

CHEMICAL ENGINEERING JOURNAL (2009)

Add to Collection

Article Engineering, Environmental

Radiation-induced grafting of glycidyl methacrylate onto cotton fabric waste and its modification for anchoring hazardous wastes from their solutions

Hesham H. Sokker et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Add to Collection

Article Engineering, Chemical

Enhancing antifouling property of polysulfone ultrafiltration membrane by grafting zwitterionic copolymer via UV-initiated polymerization

Haijun Yu et al.

JOURNAL OF MEMBRANE SCIENCE (2009)

Add to Collection

Review Polymer Science

Photo-irradiation for preparation, modification and stimulation of polymeric membranes

Dongming He et al.

PROGRESS IN POLYMER SCIENCE (2009)

Add to Collection

Article Engineering, Chemical

Polypropylene-based membrane adsorbers via photo-initiated graft copolymerization: Optimizing separation performance by preparation conditions

Abdul Halim Mohd Yusof et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

Add to Collection

Article Polymer Science

Polypropylene fibers containing dispersed clays having improved fire performance. Part II: characterization of fibers and fabrics from PP-nanoclay blends

Gillian Smart et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2008)

Add to Collection

Article Materials Science, Composites

Improving the antistatic ability of polypropylene fibers by inner antistatic agent filled with carbon nanotubes

CS Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation of nanocomposite fibers for permanent antibacterial effect

SY Yeo et al.

JOURNAL OF MATERIALS SCIENCE (2003)

Add to Collection

Article Materials Science, Textiles

Modification and properties of polypropylene fibers using aluminosiloxane

CS Yoon et al.

FIBERS AND POLYMERS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.