☆ 4.7 Article

Superparamagnetic Multifunctionalized Chitosan Nanohybrids for Efficient Copper Adsorption: Comparative Performance, Stability, and Mechanism Insights

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Adsorption of copper and nickel by using sawdust chitosan nanocomposite beads - A kinetic and thermodynamic study

K. Kayalvizhi et al.

Summary: This study investigated the adsorption behavior of biomaterial activated Sawdust-Chitosan nanocomposite beads on Ni (II) and Cu (II) ions removal from aqueous solutions. The structural analysis and surface morphology were evaluated using PXRD, TEM, and EDAX techniques, while the functional groups behavior was discussed using FTIR technique. The adsorption properties were determined using isotherm models and the maximum adsorption capacity was inferred.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Synthesis of amino acid modified MIL-101 and efficient uranium adsorption from water

Gege Zhang et al.

Summary: Three novel uranium adsorbents were synthesized by modifying MIL-101 with three amino acids: glycine, histidine, and cysteine. Among them, the histidine modified MIL-101 showed the best uranium adsorption performance, including capacity, selectivity, and recyclability. The uranium (VI) removal rate of the histidine modified MIL-101 reached 74% in the presence of various ions, indicating excellent selectivity.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Removal of copper(II) from aqueous solution using zinc oxide nanoparticle impregnated mixed matrix hollow fiber membrane

Raka Mondal et al.

Summary: The zinc oxide nanoparticle incorporated hollow fiber mixed matrix membranes showed improved membrane characteristics and high adsorption capacity for copper(II) removal. Optimum separation performance was achieved with specific operating conditions, resulting in rejection of around 92% of copper(II) with successful in-situ chemical regeneration. The developed membrane demonstrates good potential for copper(II) removal from aqueous solution.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2022)

Add to Collection

Article Chemistry, Physical

Temperature-tuned fish-scale biochar with two-dimensional homogeneous porous structure: A promising uranium extractant

Dichen Xia et al.

Summary: This study demonstrates the efficient extraction of uranium (U(VI)) using a novel activated biochar (AB) prepared from fish scales. The ABs showed a high adsorption capacity for U(VI), with thermodynamic analysis indicating a spontaneous and endothermic process dominated by chemisorption. AB-750, with a larger specific surface area and higher surface roughness, exhibited better capture efficiency for U(VI). Desorption and reusability studies confirmed the potential long-term use of AB-750. Spectral analysis revealed that carboxyl/amino groups on AB-750 were the main functional groups for immobilizing U(VI).

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Selective lead (II) sorption using aminophosphonate-based sorbents: Effect of amine linker, characterization and sorption performance

Rana R. Neiber et al.

Summary: A one-pot synthesis procedure was designed to prepare two alpha-aminophosphonate-based sorbents. The sorbents were characterized and their sorption properties for Pb(II) were investigated. The mechanisms of metal binding and factors affecting sorption performance were explored.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanistic studies of uranyl interaction with functionalized mesoporous chitosan-superparamagnetic nanocomposites for selective sorption: Characterization and sorption performance

Ahmed A. Al-Ghamdi et al.

Summary: Two hybrid magnetic-chitosan nanocomposite core-shell materials were synthesized to enhance the sorption of uranyl ions. The nanocomposites exhibited superparamagnetism and large surface-to-volume ratio. The sorption process followed the Langmuir model and pseudo-second-order rate equation, and was spontaneous, exothermic, and regulated by entropy change. The sorption sites were N/O functional groups, and elution and regeneration were achieved with acidified urea solution. The sorbents showed high sorption capacity, selectivity, recyclability, and reusability in multicomponent systems.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Polymer Science

Mesoporous Magnetic Cysteine Functionalized Chitosan Nanocomposite for Selective Uranyl Ions Sorption: Experimental, Structural Characterization, and Mechanistic Studies

Ahmed A. Al-Ghamdi et al.

Summary: Nuclear power facilities are expanding globally to meet the increasing demand for energy. As a result, uranium recovery from secondary resources is gaining attention for its environmental protection and nuclear fuel conservation benefits. In this study, a mesoporous biosorbent of a hybrid magnetic-chitosan nanocomposite functionalized with cysteine was successfully synthesized for enhanced sorption of uranyl ions. The synthesized nanocomposite exhibited superparamagnetic properties, a unipore mesoporous structure, and selective sorption of UO22+ ions.

POLYMERS (2022)

Add to Collection

Article Polymer Science

Removal and Mechanism of Cadmium, Lead and Copper in Water by Functional Modification of Silkworm Excrement Biochar

Pengyang Bian et al.

Summary: A new type of biochar (GBC) was prepared from silkworm excrement and modified with chitosan and pyromellitic dianhydride, showing improved removal efficiency for Pb, Cd, and Cu from aqueous solutions. The types of functional groups in the biochar were found to greatly influence the adsorption capacities. Furthermore, GBC displayed good renewable performance and high adsorption capacity for Cu in different water samples, indicating its great potential for Cu removal in wastewater.

POLYMERS (2022)

Add to Collection

Article Engineering, Environmental

MOFs meet wood: Reusable magnetic hydrophilic composites toward efficient water treatment with super-high dye adsorption capacity at high dye concentration

Xiaofan Ma et al.

Summary: In this study, a magnetic composite material, Co/C-1000, was prepared by in situ growth and carbonization on wood, which showed high reusability and adsorption capacity for dyes. The hierarchical porous wood structure and magnetic Co/C nanoparticles enabled rapid adsorption and efficient removal of dyes. The Co/C-1000 filter has the potential to be used in practical wastewater treatment as a replacement for commercial activated carbon.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Mechanistic study of Hg(II) interaction with three different α-aminophosphonate adsorbents: Insights from batch experiments and theoretical calculations

Safaa R. Fouda et al.

Summary: Efficient and potential chelating alpha-aminophosphonate based sorbents were synthesized and characterized in this study. The synthesized sorbents showed good adsorption capacity for Hg(II) in aqueous solution.

CHEMOSPHERE (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

One-pot solvothermal synthesis of Zr-based MOFs with enhanced adsorption capacity for Cu2+ ions removal

Tong Ling Tan et al.

Summary: In this study, the adsorption behavior of MOF-801 prepared by solvothermal method in the removal of copper ion from water was investigated. The results showed that MOF-801 had good adsorption capacity for Cu2+ and could be reused.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Functionalization of poly(glycidylmethacrylate) with iminodiacetate and imino phosphonate groups for enhanced sorption of neodymium-sorption performance and molecular modeling

Ahmed A. Galhoum et al.

Summary: Polyglycidyl methacrylate (PGMA) was functionalized to improve the sorption of Nd(III). The modified materials, A-PGMA and P-PGMA, exhibited higher sorption capacities compared to the pristine N-PGMA. The sorption isotherms were modeled using the Langmuir equation, and the sorption process was found to be endothermic, spontaneous, and governed by intraparticle diffusion. The sorbents showed high selectivity towards Nd(III) in pre-treated leachate of Egyptian monazite.

REACTIVE & FUNCTIONAL POLYMERS (2022)

Add to Collection

Article Engineering, Environmental

Study on adsorption mechanism of mercury on Ce-Cu modified iron-based biochar

Yongqiang Zhang et al.

Summary: Ce-Cu modified iron-based biochar was used to adsorb mercury, and the mercury adsorption capacity under different loadings was studied. The porous structure and surface element valence of the modified biochar were investigated, along with the reaction path and form of mercury on the biochar surface. The experimental results showed that the 4% Ce2% Cu-FeBC sample had the best mercury removal performance, and the adsorption performance remained the same even after multiple regenerations.

CHEMICAL ENGINEERING JOURNAL ADVANCES (2022)

Add to Collection

Article Materials Science, Paper & Wood

Biochar derived from non-customized matamba fruit shell as an adsorbent for wastewater treatment

Gotore Obey et al.

Summary: This study reveals the surface morphology, elemental composition, and kinetic mechanism characteristics of Matamba shell. The biochar derived from Matamba shell demonstrates excellent adsorption performance for removing organic and inorganic contaminants from the water environment.

JOURNAL OF BIORESOURCES AND BIOPRODUCTS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Active Carbon/PAN composite adsorbent for uranium removal: Modeling adsorption isotherm data, thermodynamic and kinetic studies

Ceren Kutahyali Aslani et al.

Summary: This study aimed to produce a high-capacity and stable adsorbent for separating uranium ions from the nuclear fuel cycle at different pHs and concentrations. The AC/PAN composite adsorbent showed promising results in uranium sorption, with the adsorption mechanism following pseudo-second-order kinetics. Thermodynamic analysis revealed that the adsorption system was exothermic, spontaneous, and favorable.

APPLIED RADIATION AND ISOTOPES (2021)

Add to Collection

Article Chemistry, Physical

Functionalized aminophosphonate chitosan-magnetic nanocomposites for Cd(II) removal from aqueous solutions: Performance and mechanisms of sorption

Asmaa S. Morshedy et al.

Summary: Functionalized magnetic chitosan nanocomposites synthesized by grafting alpha-amino-phosphonate functions show excellent Cd(II) removal performance with maximum sorption capacities of 118.1 mg g(-1) and 193.5 mg g(-1) for Me-MCS and Ph-MCS, respectively. The materials exhibit exothermic cadmium sorption, fast uptake, and can be efficiently desorbed for recycling applications. In multi-component solutions, selectivity differences are observed, correlated with the reactive groups and properties of heavy metal ions.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Environmental Sciences

Kinetics, isotherm and chemical speciation analysis of Hg(II) adsorption over oxygen-containing MXene adsorbent

Xiaolan Hu et al.

Summary: The study found that the two-dimensional MXene showed good adsorption performance for heavy metal mercury ions in wastewater treatment, especially under low pH conditions. It also maintained a high adsorption capacity at high temperatures and different pH values.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Physical

Recovery of iron from direct reduction iron sludge and biosynthesis of magnetite nanoparticles using green tea extract

Meysam Shahrashoub et al.

Summary: This study successfully synthesized Magnetite NanoParticles (MNP) using a green technique, showing comparable physical and chemical properties with traditionally synthesized samples.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetically separable and recyclable Fe3O4@PDA covalent grafted by l-cysteine core-shell nanoparticles toward efficient removal of Pb2+

Weisen Yang et al.

Summary: Fe3O4@PDA-g-L-Cys core-shell composites were successfully fabricated for removing Pb2+ from an aqueous solution, and the factors affecting the adsorption properties were systematically evaluated. The thermodynamics constants indicated that the process of Pb2+ removal by Fe3O4@PDA-g-L-Cys were endothermic and spontaneous.

VACUUM (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Recovery of Heavy Metal Ions Using Magnetic Glycine-Modified Chitosan-Application to Aqueous Solutions and Tailing Leachate

Asmaa Benettayeb et al.

Summary: The development of new sorbents for the removal of metal from contaminated water bodies and the recovery of metal from industrial effluents is driven by the need for environmental improvement and resource valorization. Functionalization of biopolymers, especially incorporating magnetic micro-particles, is a promising strategy for improving sorption performance.\TestCase shows magnetic glycine-grafted chitosan (G@MChs) has a promising performance in the treatment of complex metal-bearing solutions.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Review Materials Science, Paper & Wood

Synthesis and Application of Granular Activated Carbon from Biomass Waste Materials for Water Treatment: A Review

Joseph Jjagwe et al.

Summary: There is a growing global demand for activated carbon in water treatment, however, commercial activated carbon is expensive and non-renewable, leading to a search for alternative renewable materials. Biomass waste shows promise as a source for activated carbon production, but faces challenges such as low strength and poor attrition resistance.

JOURNAL OF BIORESOURCES AND BIOPRODUCTS (2021)

Add to Collection

Review Environmental Sciences

Critical Review of Exposure and Effects: Implications for Setting Regulatory Health Criteria for Ingested Copper

Alicia A. Taylor et al.

ENVIRONMENTAL MANAGEMENT (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Salicylaldehyde derivative of nano-chitosan as an efficient adsorbent for lead(II), copper(II), and cadmium(II) ions

Muhammad Saad Hussain et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Review Engineering, Environmental

Guidelines for the use and interpretation of adsorption isotherm models: A review

Mohammad A. Al-Ghouti et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Environmental Sciences

A new route for manufacturing poly(aminophosphonic)-functionalized poly(glycidyl methacrylate)-magnetic nanocomposite - Application to uranium sorption from ore leachate

Ahmed A. Galhoum et al.

ENVIRONMENTAL POLLUTION (2020)

Add to Collection

Article Biochemistry & Molecular Biology

N-Aminorhodanine modified chitosan hydrogel for antibacterial and copper ions removal from aqueous solutions

T. A. Zidan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Role of silica mid-layer in thermal and chemical stability of hierarchical Fe3O4-SiO2-TiO2 nanoparticles for improvement of lead adsorption: Kinetics, thermodynamic and deep XPS investigation

Naeemeh Esfandiari et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Enhanced and selective adsorption of Copper ions from acidic conditions by diethylenetriaminepentaacetic acid-chitosan sewage sludge composite

Atif Saleem et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Multifunctional eco-friendly sorbent based on marine brown algae and bivalve shells for subsequent uptake of Congo red dye and copper(II) ions

A. M. Elgarahy et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Advantages and disadvantages of techniques used for wastewater treatment

Gregorio Crini et al.

ENVIRONMENTAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Environmental Sciences

Amino-Fe3O4-functionalized graphene oxide as a novel adsorbent of Methylene Blue: kinetics, equilibrium, and recyclability aspects

Tiago Jose Marques Fraga et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Introduction of amino groups into polyphosphazene framework supported on CNT and coated Fe3O4 nanoparticles for enhanced selective U(VI) adsorption

Yan Liu et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Review Biochemistry & Molecular Biology

Chitosan-Based (Nano)Materials for Novel Biomedical Applications

Gregor Kravanja et al.

MOLECULES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of Fe3O4 nanoparticles coated by extracted shrimp peels chitosan as sustainable adsorbents for removal of chromium contaminates from wastewater: The design of experiment

Seied Mandi Pourmortazavi et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Environmental Sciences

Meso/micropore-controlled hierarchical porous carbon derived from activated biochar as a high-performance adsorbent for copper removal

Dinh Viet Cuong et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Chemistry, Physical

A critical review of the estimation of the thermodynamic parameters on adsorption equilibria. Wrong use of equilibrium constant in the Van't Hoof equation for calculation of thermodynamic parameters of adsorption

Eder C. Lima et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Engineering, Environmental

Use of SBA-15 ordered nano mesoporous silica for removal of copper(II) from aqueous media: Studies on equilibrium, isotherm, kinetics and thermodynamics

Qing-Zhou Zhai

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Environmental

Synthesis of α-aminophosphonate functionalized chitosan sorbents: Effect of methyl vs phenyl group on uranium sorption

Enas A. Imam et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Environmental

Preparation of MgAl-EDTA-LDH based electrospun nanofiber membrane and its adsorption properties of copper(II) from wastewater

Hong Chen et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Factorial experimental design for the optimization of highly selective adsorption removal of lead and copper ions using metal organic framework MOF-2 (Cd)

Abdol Mohammad Ghaedi et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Chemical modifications of chitosan nano-based magnetic particles for enhanced uranyl sorption

Ahmed A. Galhoum et al.

HYDROMETALLURGY (2017)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Fe-Doped Ni2P Nanosheet Array for High-Efficiency Electrochemical Water Oxidation

Jianmei Wang et al.

INORGANIC CHEMISTRY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Copper removal from industrial wastewater: A comprehensive review

Sajeda A. Al-Saydeh et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)

Add to Collection

Article Chemistry, Physical

Cellulose and chitosan derivatives for enhanced sorption of erbium(III)

Mahmoud O. Abd El-Magied et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)

Add to Collection

Review Chemistry, Physical

Removal of heavy metal ions using chitosan and modified chitosan: A review

Lei Zhang et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Thermodynamics

Investigation of magnetite nanoparticles stability in air by thermal analysis and FTIR spectroscopy

Marcela Stoia et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Dy(III) recovery from dilute solutions using magnetic-chitosan nano-based particles grafted with amino acids

Ahmed A. Galhoum et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Cysteine-Functionalized Chitosan Magnetic Nano-Based Particles for the Recovery of Light and Heavy Rare Earth Metals: Uptake Kinetics and Sorption Isotherms

Ahmed A. Galhoum et al.

NANOMATERIALS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Facile Fabrication of Magnetic Chitosan Beads of Fast Kinetics and High Capacity for Copper Removal

Wei Jiang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Engineering, Environmental

Copper removal using bio-inspired polydopamine coated natural zeolites

Yang Yu et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Add to Collection

Review Engineering, Environmental

Relevance of isotherm models in biosorption of pollutants by agricultural byproducts

S. Rangabhashiyam et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2014)

Add to Collection

Article Biochemistry & Molecular Biology

Synthesis, Surface Modification and Characterisation of Biocompatible Magnetic Iron Oxide Nanoparticles for Biomedical Applications

Mahnaz Mahdavi et al.

MOLECULES (2013)

Add to Collection

Article Engineering, Environmental

Preparation and characterization of nano-magnetic cellulose with fast kinetic properties towards the adsorption of some metal ions

A. M. Donia et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Add to Collection

Article Engineering, Environmental

Removal of uranium(VI) from aqueous solutions by magnetic Schiff base: Kinetic and thermodynamic investigation

Xiaofei Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Add to Collection

Article Chemistry, Physical

Copper, mercury and chromium adsorption on natural and crosslinked chitosan films: An XPS investigation of mechanism

Rodrigo S. Vieira et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

One-step fabrication of magnetic gamma-Fe2O3/polyrhodanine nanoparticles using in situ chemical oxidation polymerization and their antibacterial properties

Hyeyoung Kong et al.

CHEMICAL COMMUNICATIONS (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrated metal ions in aqueous solution: How regular are their structures?

Ingmar Persson

PURE AND APPLIED CHEMISTRY (2010)

Add to Collection

Article Environmental Sciences

Correlating metal ionic characteristics with blosorption capacity using QSAR model

Chen Can et al.

CHEMOSPHERE (2007)

Add to Collection

Article Chemistry, Applied

Preparation and characterization of melamine-formaldehyde-DTPA chelating resin and its use as an adsorbent for heavy metals removal from wastewater

Ahmad Baraka et al.

REACTIVE & FUNCTIONAL POLYMERS (2007)

Add to Collection

Article Chemistry, Applied

Adsorption kinetics and mechanism of cationic methyl violet and methylene blue dyes onto sepiolite

Mehmet Dogan et al.

DYES AND PIGMENTS (2007)

Add to Collection

Article Biochemistry & Molecular Biology

Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy

SY Oh et al.

CARBOHYDRATE RESEARCH (2005)

Add to Collection

Review Polymer Science

Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment

G Crini

PROGRESS IN POLYMER SCIENCE (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and characterization of (3-aminopropyl) triethoxysilane-coated magnetite nanoparticles

M Yamaura et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2004)

Add to Collection

Article Chemistry, Physical

Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds

AP Grosvenor et al.

SURFACE AND INTERFACE ANALYSIS (2004)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation and antibacterial activity of chitosan nanoparticles

LF Qi et al.

CARBOHYDRATE RESEARCH (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.