☆ 4.7 Review

A Brief Review on Selected Applications of Hybrid Materials Based on Functionalized Cage-like Silsesquioxanes

POLYMERS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Inorganic & Nuclear

Synthesis, Crystal Structures, and Optical and Magnetic Properties of Samarium, Terbium, and Erbium Coordination Entities Containing Mono-Substituted Imine Silsesquioxane Ligands

Patrycja Wytrych et al.

Summary: This paper reports on the study of imine derivatives as ligands for samarium, terbium, and erbium cations in coordination chemistry. The efficient synthesis, crystal structures, and magnetic and optical properties of these complexes are discussed. The compounds exhibit similar crystal structures and lattice parameters, and all compounds have an octahedrally coordinated metal atom. The absorption spectra show that regardless of the lanthanide involved, their energy band gap equals 2.7 eV. Luminescence is observed for the analogues containing Tb3+ and Sm3+ ions in the visible and infrared spectral range, while no emission is observed for the compound with Er3+ ion. Magnetic measurements reveal that the magnetic properties of the compounds are influenced by the crystal field effect and the nature of the cations.

INORGANIC CHEMISTRY (2023)

Add to Collection

Review Engineering, Biomedical

Injectable bone cements: What benefits the combination of calcium phosphates and bioactive glasses could bring?

Oznur Demir-Oguz et al.

Summary: Calcium phosphate bone cements (CPCs) have valuable properties such as bioactivity, osteoconductivity, injectability, and moldability, but their low mechanical performance limits their clinical application. Adding bioactive glasses (BGs) as a secondary powder phase can improve the injectable properties of CPCs and enhance the degradation rate, in vitro osteogenic differentiation, cell response, and tissue-material interaction.

BIOACTIVE MATERIALS (2023)

Add to Collection

Article Materials Science, Biomaterials

Novel hybrid composites based on double-decker silsesquioxanes functionalized by methacrylate derivatives and polyvinyl alcohol as potential materials utilized in biomedical applications

Anna Wladyczyn et al.

Summary: In this study, a novel method for preparing double-decker silsesquioxane-based biomaterials was reported. The improved structural and chemical stability of the materials enhanced their mechanical properties, cell adhesion, and migration abilities, fulfilling the requirements for potential applications in regenerative medicine.

BIOMATERIALS ADVANCES (2023)

Add to Collection

Article Materials Science, Multidisciplinary

4D Biofabrication of T-Shaped Vascular Bifurcation

Waseem Kitana et al.

Summary: This study reports a 4D biofabrication-based concept for the fabrication of a T-shaped vascular bifurcation using 3D printed shape-changing layers. The tubular structures with various diameters were formed by controlling the parameters precisely. The fabricated T-junction showed minimal leakages and supported excellent cell growth. This approach has the potential to fabricate fully automatic self-actuated vascular bifurcations.

ADVANCED MATERIALS TECHNOLOGIES (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Corner-opening and corner-capping of mono-substituted T8 POSS: product distribution and isomerization

Liang Jin et al.

Summary: In the corner-opening and corner-capping reactions of monosubstituted T-8 POSS, the yield of monosubstituted T-8 POSS is much higher than the ortho- and meta-isomers of disubstituted T-8 POSS, and the para-isomer is negligible.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Multidisciplinary

3D-printed porous PEEK scaffold combined with CSMA/POSS bioactive surface: A strategy for enhancing osseointegration of PEEK implants

Zhewen Liu et al.

Summary: By integrating the modified CSMA/POSS bioactive microporous surface with PEEK scaffolds, enhanced protein adsorption and bone formation can be achieved, showing promising potential for improving osseointegration.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Sol-gel bioactive glass containing biomaterials for restorative dentistry: A review

Hazel O. Simila et al.

Summary: This review examines the application of sol-gel synthesized bioactive glasses (BAGs) in restorative dentistry. The study finds that sol-gel derived BAGs are mainly used in the treatment of hypersensitive dentine and for pulp-dentine tissue engineering, showing potential for improving biological properties, antibacterial effects, hardness, acid buffering, and remineralization. However, the addition of BAGs may have detrimental effects on optical properties, highlighting the need for further research and improvement.

DENTAL MATERIALS (2022)

Add to Collection

Article Polymer Science

Physicomechanical and cellular behavior of 3D printed polycaprolactone/poly(lactic-co-glycolic acid) scaffold containing polyhedral oligomeric silsesquioxane and extracellular matrix nanoparticles for cartilage tissue engineering

Zahra Alidadi Shamsabadi et al.

Summary: This study designed a 3D scaffold using polycaprolactone (PCL)/poly(lactic-co-glycolic acid) (PLGA) biomaterial inks, with the addition of polyhedral oligomeric silsesquioxane (POSS) nanoparticles and cartilage derived extracellular matrix (ECM) particles. The results showed that the 3D printed scaffold containing PCL/PLGA/20%ECM/3%POSS had a higher compressive modulus, while the scaffold containing PCL/PLGA/5%POSS/20%ECM demonstrated high biocompatibility and cell viability.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Polyhedral Oligomeric Silsesquioxane as a Polarity Mediator and Reinforced Nanofiller for Fabricating Robust and Hierarchical Porous Film for Cell Bioengineering

Hong Chi et al.

Summary: This study introduces the design of a polymer film that provides a balanced combination of mechanical properties and specific surface areas, while sustaining cell functions. By incorporating a bi-functional glycidyl-propyl POSS (G-POSS) into the epoxy polymer backbone, the researchers were able to reinforce the mechanical performance and induce self-assembly into a three-dimensional connected porous structure. The results showed that the POSS hybrid polymer scaffold has the potential for applications in cell culture platforms and future tissue repair and regeneration.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanically Robust Hydrogels Facilitating Bone Regeneration through Epigenetic Modulation

Tingting Yu et al.

Summary: Development of artificial biomaterials that mimic the extracellular matrix of bone tissue is a promising strategy for bone regeneration. However, the current hydrogel substitutes have inhomogeneous networks and weak mechanics, which greatly hinder their clinical applications. In this study, a dual crosslinked gelling system with tunable architectures and mechanics was developed to promote osteogenic capacity. The hybrid hydrogel showed outstanding osteogenic potential both in vitro and in vivo, and a key epigenetic regulator of ten-eleven translocation 2 (Tet2) was discovered to play a significant role in promoting osteogenesis.

ADVANCED SCIENCE (2022)

Add to Collection

Article Materials Science, Biomaterials

3D bio-printing of photocrosslinked anatomically tooth-shaped scaffolds for alveolar ridge preservation after tooth extraction

Haihuan Gong et al.

Summary: In this study, a novel photocrosslinked composite ink was developed for fabricating 3D porous scaffolds for alveolar ridge preservation. The composite material exhibited sufficient mechanical strength, bioactivity, and osteoinductivity, and matched the morphological requirements of tooth extraction sockets. Experimental results confirmed that the composite material promoted cell proliferation and reduced alveolar bone resorption, indicating its potential as a scaffold for alveolar ridge preservation and bone grafts in the future.

JOURNAL OF MATERIALS CHEMISTRY B (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Borate Bioactive Glasses (BBG): Bone Regeneration, Wound Healing Applications, and Future Directions

Duygu Ege et al.

Summary: Since the early 2000s, borate bioactive glasses (BBGs) have been extensively studied for biomedical applications. Research indicates that BBGs often demonstrate superior bioactivity and bone healing capacity compared to silicate glasses. They are also suitable for drug delivery and wound healing, and can be enhanced with modifying ions. Recent research is focused on nerve, muscle, and cartilage regeneration applications. The physical and biological characteristics, applications, and future research directions of BBGs are analyzed in this review paper.

ACS APPLIED BIO MATERIALS (2022)

Add to Collection

Article Materials Science, Biomaterials

Functionalized gelatin/strontium hydrogel bearing endothelial progenitor cells for accelerating angiogenesis in wound tissue regeneration

Yixiong Chen et al.

Summary: A therapeutic angiogenesis complex using a mixture of dopamine-modified polyhedral oligomeric silsesquioxane (Dopa-POSS), strontium ions (Sr2+ ions) photocrosslinked gelatin methacryloyl (GelMA) hydrogel and endothelial progenitor cells (EPCs) has been developed for full-thickness burn wound healing. The complex effectively enhances the mechanical strength of the hydrogel, promotes EPC proliferation and angiogenesis-related protein expression, and accelerates new blood vessel development, collagen deposition, and re-epithelialization.

BIOMATERIALS ADVANCES (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Hydroxyalkyl-substituted double-decker silsesquioxanes: effective separation of cis and trans isomers

Anna Wladyczyn et al.

Summary: In this study, the preparation, isolation, and characterization of a family of double-decker silsesquioxane architectures were reported. A method to obtain pure cis and trans isomers of double-decker silsesquioxanes was described, which may lead to the preparation of new materials and polymers with well-defined properties.

INORGANIC CHEMISTRY FRONTIERS (2022)

Add to Collection

Review Engineering, Biomedical

Polyaniline based polymers in tissue engineering applications: a review

Ranjana Rai et al.

Summary: This article introduces electrically conducting polymer scaffolds for tissue engineering, focusing on the advantages and applications of PANi materials. Research shows that PANi-based scaffolds have biocompatibility, conductivity, positive cellular response, and antibacterial effects.

PROGRESS IN BIOMEDICAL ENGINEERING (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Polyhedral Oligomeric Silsesquioxanes (POSS)-based Hybrid Materials: Molecular Design, Solution Self-Assembly and Biomedical Applications

Linfeng Fan et al.

Summary: POSS-based hybrid materials, with their unique structures and multifunctionality, have great potential in various fields. Recent advances in molecular design and self-assembly have provided opportunities for improving material performance and diversifying applications.

CHINESE JOURNAL OF CHEMISTRY (2021)

Add to Collection

Review Polymer Science

POSS hybrid hydrogels: A brief review of synthesis, properties and applications

Siju Liu et al.

Summary: POSS hybrid hydrogels possess excellent properties and broad application prospects in various biomedical fields. Ideal hybrid hydrogels can be obtained by introducing POSS nanoparticles into hydrogels through simple methods.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing thermal and mechanical properties of gelatin-based nanocomposite with aqueous dispersible multiple epoxy polyhedral oligomeric silsesquioxanes

Junchao Wang et al.

Summary: In this study, a water-dispersive POSS containing multiple epoxy groups was synthesized and used to prepare gelatin/POSS nanocomposites, resulting in improved thermal and mechanical properties. The cross-linking reaction between the epoxy groups in P-G-POSS and the amino groups in gelatin macromolecules played a crucial role in enhancing the properties of the composites. This research could facilitate the application of POSS in bone tissue regeneration and leather cleaner production.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Biomaterials

A novel magnesium ion-incorporating dual-crosslinked hydrogel to improve bone scaffold-mediated osteogenesis and angiogenesis

Xintao Zhang et al.

Summary: A novel hydrogel incorporating magnesium ions was developed to promote cell adhesion, spreading, proliferation, osteogenic differentiation of BMSCs, and angiogenesis, showing potential for repairing bone defects by facilitating cell adhesion, osteogenesis, and vascularization.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A Novel Dual-Crosslinked Functional Hydrogel Activated by POSS for Accelerating Wound Healing

Cheng Yang et al.

Summary: A novel nanocomposite hydrogel is designed in this study, which possesses high toughness, strength, good tissue adhesiveness, and promotes cell attachment and proliferation. It acts as a controlled release carrier of silver ions for antibacterial activity and has the ability to promote skin regeneration.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Add to Collection

Article Polymer Science

Self-Assembly of Poly(Janus particle)s into Unimolecular and Oligomeric Spherical Micelles

Zhan Li et al.

Summary: Researchers reported the construction of amphiphiles using shape-persistent Janus particles and their unique self-assembly behavior to form unimolecular and oligomeric micellar nanostructures in solutions. This study provides a model system for generating unconventional micelle structures through solution self-assembly with low degrees of polymerization.

ACS MACRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Possible coordination modes of copper(II) atom in model silsesquioxanes complexes at various pH conditions: DFT study

Mariusz Michalczyk et al.

Summary: The study investigates the coordination modes of copper(II) cation in the POSS-1 ligand neighborhood using DFT calculations, and suggests that ethanol solvent molecules play an active role in the coordination to the metallic center in acidic environment.

CHEMICAL PHYSICS LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Revealing the Dynamic Behaviors of Tetrahydrofuran for Tailoring the Active Species of Ziegler-Natta Catalysts

Peng Liang et al.

Summary: This study demonstrates the assembly of porous microspheres from rhombic MgCl2 nanocrystals with laterals by utilizing POSS molecules, which can then be used for ethylene polymerization after TiCl4 immobilization. Experimental evidence shows the direct impact of THF adsorption on the structure and performance of the active sites formed on MgCl2 surfaces.

ACS CATALYSIS (2021)

Add to Collection

Article Materials Science, Biomaterials

Construction of biomimetic artificial intervertebral disc scaffold via 3D printing and electrospinning

Meiling Zhu et al.

Summary: A biomimetic artificial IVD scaffold was constructed using a combination of 3D printing and electrospinning techniques, mimicking the structure and mechanical properties of natural IVD. The scaffold, with materials simulating annulus fibrosus and nucleus pulposus structures, provides good mechanical support for tissue repair and regeneration.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Mono-substituted cage-like silsesquioxanes bound by trifunctional acyl chloride as a multi-donor N,O-type ligand in copper(ii) coordination chemistry: synthesis and structural properties

Kamila Piec et al.

Summary: This paper reports on the synthesis and structural properties of a novel POSS-based ligand created by two mono-substituted cubic silsesquioxanes bound by trifunctional aromatic acyl chloride, which may act as a multi-donor N,O-type ligand in copper(ii) coordination chemistry. Coordination entities were confirmed through solution absorption spectra with different Cu2+ salts, showing characteristic d-d transition bands. Coordination modes varied with pH, suggesting oxygen donors at acidic pH levels and nitrogen donors at higher pH values.

NEW JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Polyhedral Oligomeric Silsesquioxane-Incorporated Gelatin Hydrogel Promotes Angiogenesis during Vascularized Bone Regeneration

Mingjiao Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Multidisciplinary

A novel mineralized high strength hydrogel for enhancing cell adhesion and promoting skull bone regeneration in situ

Xintao Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Revisiting the identity of delta-MgCl2: Part I. Structural disorder studied by synchrotron X-ray total scattering

Toru Wada et al.

JOURNAL OF CATALYSIS (2020)

Add to Collection

Article Chemistry, Physical

Revisiting the identity of δ-MgCl2: Part II. Morphology and exposed surfaces studied by vibrational spectroscopies and DFT calculation

Alessandro Piovano et al.

JOURNAL OF CATALYSIS (2020)

Add to Collection

Article Chemistry, Physical

Disclosing the Interaction between Carbon Monoxide and Alkylated Ti3+ Species: a Direct Insight into Ziegler-Natta Catalysis

Alessandro Piovano et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Article Polymer Science

Ultrasmall Nanoparticle ROS Scavengers Based on Polyhedral Oligomeric Silsesquioxanes

Zhan Li et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2020)

Add to Collection

Review Materials Science, Biomaterials

Bioactive Glasses: A Promising Therapeutic on Release Strategy for Enhancing Wound Healing

Tina Mehrabi et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Mono-substituted amine-oligosilsesquioxanes as functional tools in Pd(II) coordination chemistry: synthesis and properties

Kamila Piec et al.

NEW JOURNAL OF CHEMISTRY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Integrated POSS-dendrimer nanohybrid materials: current status and future perspective

Zhan Li et al.

NANOSCALE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Thermal conductivity of 2D nano-structured boron nitride (BN) and its composites with polymers

Valentina Guerra et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Construction of novel silicon-phosphorus linear polymers with DDSQ and DOPO derivatives for effective flame retardancy of PC/ABS

Wenpeng Song et al.

FIRE AND MATERIALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Protective polymeric films for industrial substrates: A critical review on past and recent applications with conducting polymers and polymer composites/nanocomposites

Saviour A. Umoren et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding

Hooman Abbasi et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Polymer Science

Morphology, dynamics, and order development in a thermoplastic polyurethane with melt blended POSS

Ewa Szefer et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2019)

Add to Collection

Article Polymer Science

Entanglement Formation Mechanism in the POSS Modified Heterogeneous Ziegler-Natta Catalysts

Yuming Chen et al.

MACROMOLECULES (2019)

Add to Collection

Article Materials Science, Biomaterials

Fabrication, multi-scale characterization and in-vitro evaluation of porous hybrid bioactive glass polymer-coated scaffolds for bone tissue engineering

Adrian Chlanda et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

MethacrylPhenyl POSS modified UV-curing materials for three-dimensional printing

Zhou Jiang et al.

SN APPLIED SCIENCES (2019)

Add to Collection

Article Materials Science, Biomaterials

In situ bone regeneration enabled by a biodegradable hybrid double-network hydrogel

Yuanhao Zhang et al.

BIOMATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Novel phosphorus-nitrogen-silicon copolymers with double-decker silsesquioxane in the main chain and their flame retardancy application in PC/ABS

Zhang Wang et al.

FIRE AND MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Facile high-temperature synthesis of weakly entangled polyethylene using a highly activated Ziegler-Natta catalyst

Wei Li et al.

JOURNAL OF CATALYSIS (2018)

Add to Collection

Article Chemistry, Physical

Spectroscopic Evidences for TiCl4/Donor Complexes on the Surface of MgCl2-Supported Ziegler-Natta Catalysts

Alessandro Piovano et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Review Materials Science, Biomaterials

Selected developments and medical applications of organic-inorganic hybrid biomaterials based on functionalized spherosilicates

Lukasz John

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Polymer/SiO2 nanocomposites: Production and applications

Shadpour Mallakpour et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Polyurethane nanocomposite based gas barrier films, membranes and coatings: A review on synthesis, characterization and potential applications

Mangala Joshi et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Genesis of MgCl2-based Ziegler-Natta Catalysts as Probed with Operando Spectroscopy

Alessandro Piovano et al.

CHEMPHYSCHEM (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of novel phosphorus-nitrogen-silicone grafted graphene oxide and its synergistic effect on intumescent flame-retardant polypropylene composites

Gaowei Yuan et al.

RSC ADVANCES (2018)

Add to Collection

Article Materials Science, Biomaterials

Designing of macroporous magnetic bioscaffold based on functionalized methacrylate network covered by hydroxyapatites and doped with nano-MgFe2O4 for potential cancer hyperthermia therapy

Lukasz John et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Bio-based flame retardants: When nature meets fire protection

Lucie Costes et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2017)

Add to Collection

Article Chemistry, Physical

Demystifying Ziegler-Natta Catalysts: The Origin of Stereoselectivity

Antonio Vittoria et al.

ACS CATALYSIS (2017)

Add to Collection

Review Chemistry, Organic

Self-Assembling Polyhedral Silsesquioxanes - Structure and Properties

Anna Kowalewska

CURRENT ORGANIC CHEMISTRY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

High-Performance Nano-Photoinitiators with Improved Safety for 3D Printing

Yanyang Han et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Composites

Fabrication of fullerene-decorated graphene oxide and its influence on flame retardancy of high density polyethylene

Zhenghong Guo et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Multifunctional imine-POSS as uncommon 3D nanobuilding blocks for supramolecular hybrid materials: synthesis, structural characterization, and properties

Mateusz Janeta et al.

DALTON TRANSACTIONS (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Unexpected Reactions between Ziegler-Natta Catalyst Components and Structural Characterization of Resulting Intermediates

Piotr Sobota et al.

INORGANIC CHEMISTRY (2016)

Add to Collection

Article Materials Science, Biomaterials

Strontium-doped organic-inorganic hybrids towards three-dimensional scaffolds for osteogenic cells

Lukasz John et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and microstructural properties of the scaffold based on a 3-(trimethoxysilyl)propyl methacrylate-POSS hybrid towards potential tissue engineering applications

L. John et al.

RSC ADVANCES (2016)

Add to Collection

Article Engineering, Biomedical

Reprint of: Review of bioactive glass: From Hench to hybrids

Julian R. Jones

Acta Biomaterialia (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Probing the Coordinative Unsaturation and Local Environment of Ti3+ Sites in an Activated High-Yield Ziegler-Natta Catalyst

Elena Morra et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Polymer Science

Synthesis and properties of poly(aryl ether sulfone)s incorporating cage and linear organosiloxane in the backbones

Jiuduo Xu et al.

POLYMER (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of a silica nanospheres/graphene oxide hybrid and its application in phenolic foams with improved mechanical strengths, friability and flame retardancy

Xiaoyan Li et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of incorporation of POSS compounds and phosphorous hardeners on thermal and fire resistance of nanofilled aeronautic resins

M. Raimondo et al.

RSC ADVANCES (2015)

Add to Collection

Article Engineering, Biomedical

Cotton-wool-like bioactive glasses for bone regeneration

G. Poologasundarampillai et al.

ACTA BIOMATERIALIA (2014)

Add to Collection

Review Chemistry, Physical

Olefin Polymerization with Supported Catalysts as an Exercise in Nanotechnology

Markus Klapper et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Engineering, Chemical

Synthesis of A Novel Phosphorus-Nitrogen-Silicon Polymeric Flame Retardant and Its Application in Poly(lactic acid)

Fenghui Liao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Add to Collection

Article Polymer Science

Polycarbonate nanocomposite with improved fire behavior, physical and psychophysical transparency

H. Vahabi et al.

EUROPEAN POLYMER JOURNAL (2013)

Add to Collection

Article Polymer Science

Organic-inorganic copolymers with double-decker silsesquioxane in the main chains by polymerization via click chemistry

Kun Wei et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Largely enhanced thermal and mechanical properties of polymer nanocomposites via incorporating C60@ graphene nanocarbon hybrid

Ping'an Song et al.

NANOTECHNOLOGY (2013)

Add to Collection

Article Polymer Science

Organic-inorganic polyurethanes with 3,13-dihydroxypropyloctaphenyl double-decker silsesquioxane chain extender

Kun Wei et al.

POLYMER CHEMISTRY (2013)

Add to Collection

Article Polymer Science

Flame retardant mechanisms of phosphorus-containing polyhedral oligomeric silsesquioxane (DOPO-POSS) in polycarbonate composites

Wenchao Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Polymer Science

Synergistic Effect of POSS on Mechanical Properties, Flammability, and Thermal Degradation of Intumescent Flame Retardant Polylactide Composites

Xin Wang et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2012)

Add to Collection

Article Chemistry, Physical

Simultaneous reduction and surface functionalization of graphene oxide with POSS for reducing fire hazards in epoxy composites

Xin Wang et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection

Article Polymer Science

Development of fire resistant PET fibrous structures based on phosphinate-POSS blends

Nizar Didane et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Article Polymer Science

A comparative study of POSS as synergists with zinc phosphinates for PET fire retardancy

Nizar Didane et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Article Polymer Science

Reaction to fire of an intumescent epoxy resin: Protection mechanisms and synergy

Caroline Gerard et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Article Polymer Science

Synthesis of Phosphorus-Containing Polyhedral Oligomeric Silsesquioxanes via Hydrolytic Condensation of a Modified Silane

Wenchao Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Add to Collection

Article Chemistry, Physical

Polypropylene nanocomposites based on C60-decorated carbon nanotubes: thermal properties, flammability, and mechanical properties

Pingan Song et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Article Chemistry, Physical

Growth and fire protection behavior of POSS-based multilayer thin films

Yu-Chin Li et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Article Chemistry, Physical

Organic-inorganic poly(hydroxyether of bisphenol A) copolymers with double-decker silsesquioxane in the main chains

Lei Wang et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Article Polymer Science

Novel flame retardancy effects of DOPO-POSS on epoxy resins

Wenchao Zhang et al.

POLYMER DEGRADATION AND STABILITY (2011)

Add to Collection

Article Polymer Science

Synergistic and antagonistic effects in flame retardancy of an intumescent epoxy resin

Caroline Gerard et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes

David B. Cordes et al.

CHEMICAL REVIEWS (2010)

Add to Collection

Article Polymer Science

Thermal Degradation Behaviors of Epoxy Resin/POSS Hybrids and Phosphorus-Silicon Synergism of Flame Retardancy

Xin Wang et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)

Add to Collection

Article Polymer Science

Mechanical and thermal properties and flame retardancy of phosphorus-containing polyhedral oligomeric silsesquioxane (DOPO-POSS)/polycarbonate composites

Wenchao Zhang et al.

POLYMER DEGRADATION AND STABILITY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic effects of polyhedral oligomeric silsesquioxane (POSS) and oligomeric bisphenyl A bis(diphenyl phosphate) (BDP) on thermal and flame retardant properties of polycarbonate

Qingliang He et al.

JOURNAL OF MATERIALS SCIENCE (2009)

Add to Collection

Article Polymer Science

Influence of POSS structure on the fire retardant properties of epoxy hybrid networks

Elsa Franchini et al.

POLYMER DEGRADATION AND STABILITY (2009)

Add to Collection

Article Polymer Science

Synthesis and characterization of organosoluble aromatic polyimides containing POSS in main chain derived from double-decker-shaped silsesquioxane

Shouming Wu et al.

MACROMOLECULES (2008)

Add to Collection

Article Polymer Science

The use of POSS as synergist in intumescent recycled poly(ethylene terephthalate)

A. Vannier et al.

POLYMER DEGRADATION AND STABILITY (2008)

Add to Collection

Article Polymer Science

Key elements in the structure and function relationship of the MgCl2/TiCl4/Lewis base Ziegler-Natta catalytic system

Andrea Correa et al.

MACROMOLECULES (2007)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Titanium-manganese compound with a chiral Mn3Ti center

Lucjan B. Jerzykiewicz et al.

INORGANIC CHEMISTRY (2007)

Add to Collection

Article Polymer Science

Metal functionalized POSS as fire retardants in polypropylene

Alberto Fina et al.

POLYMER DEGRADATION AND STABILITY (2006)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Structural characterization of a methylaluminoxane (MAO)-magnesium dichloride cluster:: Model of MAO grafted onto a MgCl2 support

L John et al.

INORGANIC CHEMISTRY (2005)

Add to Collection

Article Polymer Science

Fire retardancy of vinyl ester nanocomposites: Synergy with phosphorus-based fire retardants

G Chigwada et al.

POLYMER DEGRADATION AND STABILITY (2005)

Add to Collection

Article Chemistry, Physical

The mechanical strength of a covalent bond calculated by density functional theory

MK Beyer

JOURNAL OF CHEMICAL PHYSICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.