Related references
Note: Only part of the references are listed.
Article
Physics, Applied
B. Shankar Goud et al.
Summary: This paper investigates the effects of velocity, temperature, and solutal slip on the mass and heat transfer characteristics of MHD mixed convection Casson fluid flow along an exponential permeable stretching surface. The governing equations, representing momentum, energy, and species concentration, are converted into ordinary differential equations using the similarity transformation. The ODEs are then numerically solved using the Keller-box method. The impacts of altered physical characteristics on flow quantities are explored through graphs and tables.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
(2023)
Article
Multidisciplinary Sciences
Navid Alipour et al.
Summary: To address the challenge of thermal performance and heat loss in energy conversion systems, this study simulated a trapezoidal cavity with a wavy top wall containing water/ethylene glycol GO-Al2O3 nanofluid using the Galerkin finite element method. The effects of physical parameters, such as porosity, thermal radiation, magnetic field angle, Rayleigh number, and Hartmann number, on thermal performance and fluid flow were investigated. The optimized values for these parameters were determined to be 1214.46, 2.86, 0.63, 0.24, and 59.35, respectively. By applying RSM and Taguchi integration, the highest average Nusselt number of 3.07 was achieved, indicating improved thermal performance.
SCIENTIFIC REPORTS
(2023)
Article
Engineering, Mechanical
S. P. Samrat et al.
Summary: This study investigates the heat transfer and flow behavior of magnetohydrodynamic dusty-nano- and dusty-hybrid nanoliquids caused by the stretched surface. It was found that dusty-hybrid nanoliquids show higher heat dispersion compared to dusty nanoliquids, and an increase in dust particle mass concentration leads to higher temperature and Nusselt number.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
(2022)
Article
Engineering, Mechanical
N. Sandeep et al.
Summary: This investigation discusses the novel significance of nonlinear thermal radiation effect on magnetohydrodynamic flow of Casson hybrid nanoliquid caused by a curved stretching sheet. Numerical calculations are performed to analyze the flow and thermal transport nature of three different hybrid nanoliquids in the presence of viscous dissipation, nonlinear radiation, and magnetic force.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
(2022)
Article
Engineering, Mechanical
N. Sandeep et al.
Summary: This paper investigates the significance of nanoparticle shape on magnetohydrodynamic stagnation-point flow of Carreau nanoliquid, showing that spherical nanoparticles have superior thermal transfer performance compared to cylindrical and laminar-shaped nanoparticles. The study also highlights the importance of needle thickness parameter in enhancing the thermal transport rate of the nanoliquid.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
(2022)
Article
Thermodynamics
Pankaj Mishra et al.
Summary: This study investigates the effect of various physical parameters on magnetohydrodynamic Williamson nanofluid boundary layer flow past a wedge through porous media. The results show that variables such as viscosity, Brownian motion, and thermophoresis have significant effects on the velocity, temperature, concentration, and transfer rates of heat and mass. The findings also reveal the importance of the Williamson parameter and variable viscosity coefficient in understanding the behavior of the flow.
Article
Engineering, Multidisciplinary
Shankar Goud Bejawada et al.
Summary: This study examines the two-dimensional radiating mixed convective flow of a nanofluid over an inclined wavy surface, taking into account the presence of a non-Darcy penetrable material. The wavy surface is transformed into a smooth surface using coordinate transformation, and the mathematical formulation is converted into a group of ordinary differential equations (ODEs) that are solved using the bvp4c coding in MATLAB. The comparison with previous studies demonstrates the consistency of the current results and the acceptance of the numerical bvp4c method. The influence of relevant factors on nondimensional fluid flow areas, heat, and mass transmission rates is investigated.
ALEXANDRIA ENGINEERING JOURNAL
(2022)
Article
Multidisciplinary Sciences
Shahin Akbari et al.
Summary: This study presents a comprehensive analytical technique for evaluating the non-Fourier thermal behavior of a 3-D hollow sphere subjected to arbitrarily-chosen space and time dependent boundary conditions. The transient hyperbolic thermal diffusion equation is solved using the Cattaneo-Vernotte model and separation of variables. The effects of different boundary conditions on temperature distribution are analyzed, revealing the characteristics of lag time and jump points in hyperbolic thermal propagation.
Article
Mechanics
Shahin Faghiri et al.
Summary: This article investigates the Graetz-Nusselt problem for blood as a non-Newtonian fluid with power-law constitutive equation flowing inside an axisymmetric tube subjected to non-uniform surface heat flux. The flow field is determined by solving the continuity and momentum equations, and the energy equation is handled using the separation of variables method. Numerical calculations are performed using MATLAB built-in solver BVP4C, and an approximate analytic solution is obtained through an integral approach. The effects of controlling parameters on the thermal characteristics and structure of the non-Newtonian fluid flow are discussed. The results show that switching from constant to non-uniform wall heat flux significantly improves the accuracy of the simulation, and the maximum arterial wall temperature is found to be about 311.56 K under specific conditions.
THEORETICAL AND APPLIED MECHANICS LETTERS
(2022)
Article
Multidisciplinary Sciences
Y. Dharmendar Reddy et al.
Summary: This article discusses the thermal radiation impact of MHD boundary layer flow of Williamson nanofluid along a stretching surface with porous medium, taking into account velocity and thermal slips. The study provides insight into the heat and mass transport phenomena caused by thermophoresis and Brownian motion, and quantitatively and qualitatively assesses the effect of flow regulating factors on relevant profiles. The findings contribute to a better understanding of the heat transfer characteristics in nanofluid flow.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2022)
Article
Thermodynamics
Fazle Mabood et al.
Summary: This research focuses on the boundary layer analysis of two-dimensional unsteady hybrid nanofluid flow over a flat/slendering stretching surface incorporating thermal radiation and magnetohydrodynamic analysis. The study resolves the transformed nonlinear ordinary differential equations using the Runge-Kutta-Fehlberg technique, and discusses the influences of the flow regime on several thermofluidic parameters. The main finding is that increasing the magnetic field and nanoparticle volume fraction parameters decreases skin friction, while improvements in radiation and nanoparticle volume fraction lead to a significant increase in heat transfer rate.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
(2021)
Article
Thermodynamics
Sulochana Chalavadi et al.
Summary: This numerical investigation explores the boundary layer characteristics of MHD flow of hybrid nanoliquids with thermal radiation effects, revealing the enhanced thermal transport performance of a special variety of alloy hybrid nanoparticles. The study also shows that the thermal transport operation of the Casson fluid model outperforms the Carreau fluid model. Additionally, the thermal distributions of the Carreau fluid model are significantly influenced by the increase in volume fraction of hybrid particles compared to the Casson fluid model.
Article
Thermodynamics
Dharmendar Reddy Yanala et al.
Summary: The numerical approach was used to analyze the transient laminar slip flow over an infinite vertical plate with ramped and constant temperatures involving chemical reaction and thermal radiation. Slip conditions have broad applicability in industry and chemical engineering, with radiation having a noticeable impact on the flow, especially in constant conditions. The study showed that radiation and buoyancy effects accelerate flow near the plate, particularly when influenced by slip conditions.
Article
Thermodynamics
G. P. Ashwinkumar et al.
Summary: This paper examines the impact of nonlinear thermal radiation on 2-D magnetohydrodynamic flow of hybrid nanoliquid across two distinct geometries and discusses the resulting flow and thermal distributions. The results show that nonlinear thermal radiation enhances thermal distributions and decreases heat transfer rates, with differences observed between flow over a cone and flow over a plate. Additionally, the thermal transport rate is significantly higher for flow above a cone compared to flow over a plate.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Multidisciplinary Sciences
Hana Storkanova et al.
Summary: According to the study, plasma levels of Hsp90 are increased in patients with systemic sclerosis compared to healthy controls, and are associated with increased inflammatory activity, worsened lung function, and extent of skin involvement in patients with diffuse cutaneous systemic sclerosis. In patients with systemic sclerosis-associated interstitial lung disease treated with cyclophosphamide, baseline Hsp90 levels can predict changes in DLCO over 12 months of therapy.
SCIENTIFIC REPORTS
(2021)
Article
H. Talebi Rostami et al.
International Journal of Ambient Energy
(2021)
Article
Multidisciplinary Sciences
Seemab Bashir et al.
Summary: The study analyzes the effects of modified Fourier and Fick's theories on Carreau-Yasuda nanofluid flow over a stretched surface. Results show an increase in nanoparticle concentration with increasing chemical reaction, as well as an increase in efficiency of Brownian motion and thermophoresis parameter. Additionally, an opposite behavior of velocity profile and skin friction coefficient is observed with increasing stretching ratio parameter.
SCIENTIFIC REPORTS
(2021)
Article
Engineering, Mechanical
Muhammad Bilal et al.
Summary: This article focuses on assessing the Darcy-Forchheimer flow of magnetohydrodynamic Williamson nanofluid with entropy optimization. The impacts on fluid flow via a stratified plate are analyzed, considering factors like viscous dissipation, chemical reaction, and Joule heating. The study provides valuable insights through curves, tables, and graphical outcomes, emphasizing the physical importance of the research.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
(2021)
Article
Multidisciplinary Sciences
Naila Shaheen et al.
Summary: This study analyzes the effects of variable characteristics on a three-dimensional dusty Casson nanofluid flow past a deformable bidirectional surface combined with chemical reaction and Arrhenius activation energy. Numerical analysis shows a decrease in velocity field for fluid-particle suspension, an increase in concentration field, and an increase in heat and mass flux with parameters such as porosity and Hartmann number escalating.
SCIENTIFIC REPORTS
(2021)
Article
Thermodynamics
G. P. Ashwinkumar
Summary: This study presents an analytical investigation of unsteady magnetohydrodynamic flow of Al50Cu50/Ag-water nanofluid over an elongated surface with thermal radiation and thermal diffusion effects. The results indicate that the thermal transport performance of Al50Cu50-water nanofluid is relatively high compared to Ag-water nanofluid, and thermal radiation and chemical reaction parameters tend to enhance the mass transfer rate.
Article
Computer Science, Information Systems
Hammad Alotaibi et al.
Summary: This paper investigates the impact of heat absorption and suction on magnetohydrodynamic boundary-layer flow of Casson nanofluid on a nonlinear stretching surface. Numerical computations using Maple 15 software show the influence of control parameters on nanoparticle concentration profiles, temperature, and flow velocity. The results are in excellent agreement with previous studies, indicating an enhancement in heat and mass transfer rates with increasing power-index and suction parameters, while being reduced with higher Casson and heat absorption parameters.
CMC-COMPUTERS MATERIALS & CONTINUA
(2021)
Article
Multidisciplinary Sciences
Iskander Tlili et al.
SCIENTIFIC REPORTS
(2020)
Article
Multidisciplinary Sciences
Iskander Tlili et al.
SCIENTIFIC REPORTS
(2020)
Article
Energy & Fuels
F. Mabood et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY
(2020)
Review
Nanoscience & Nanotechnology
Mojgan Sheikhpour et al.
NANOTECHNOLOGY SCIENCE AND APPLICATIONS
(2020)
Article
Mathematics, Applied
Sabir Ali Shehzad et al.
APPLIED MATHEMATICS AND COMPUTATION
(2014)
Article
Thermodynamics
Asterios Parrtokratoras
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
(2014)
Article
Engineering, Chemical
Ammar Mushtaq et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
(2014)
Article
Nanoscience & Nanotechnology
Mania Goyal et al.
APPLIED NANOSCIENCE
(2014)
Article
Nanoscience & Nanotechnology
S. Nadeem et al.
APPLIED NANOSCIENCE
(2014)
Article
Physics, Multidisciplinary
Asterios Pantokratoras et al.
Article
Physics, Multidisciplinary
T. G. Motsumi et al.
Review
Green & Sustainable Science & Technology
R. Saidur et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2011)
Review
Thermodynamics
Kaufui V. Wong et al.
ADVANCES IN MECHANICAL ENGINEERING
(2010)
Article
Mathematics, Applied
Abdul Aziz
COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION
(2009)
Article
Thermodynamics
J Buongiorno
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
(2006)
