Related references
Note: Only part of the references are listed.
Article
Engineering, Environmental
Junzhen Guo et al.
Summary: In this study, an amphiphilic Mo/HNT/S nanoreactor was developed by immobilizing MoOx on the internal surface of halloysite nanotubes (HNT) and modifying the external surface with organosilanes. The catalyst exhibited high activity for oxidative desulfurization and showed improved stability over multiple cycles. The amphiphilic nature of the nanoreactor allowed for enhanced dispersion in the oil phase and formation of a concentrated microenvironment for the reactants and reactive oxygen species. This catalytic system eliminates the need for solvent extraction in the desulfurization process, making it a promising candidate for large-scale industrial applications.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Energy & Fuels
Junhui Hao et al.
Summary: The study investigated the distribution of various types of sulfur in Buton oil sand bitumen, identifying different types of sulfur-containing compounds through selective oxidation and extraction methods. The results showed that sulfide sulfur, thiophenic sulfur, and sulfoxide/sulfone sulfur were the main sulfur components in OSB, with different enrichment patterns in saturates, aromatics, resins, and asphaltenes. The research also conducted thermal cracking experiments on OSB, assessing the composition and classes of sulfur-containing compounds in the produced oil sand oil under different conditions. The findings indicated that the composition and distribution of sulfur-containing compounds in the oil sand oil varied with temperature and heat carriers, providing valuable insights into the thermal cracking behavior of SCCs in OSB.
Article
Engineering, Environmental
Jiacheng Xu et al.
Summary: Prepared PdO/SiO2@graphene oxide (GO) hybrid aerogels showed better adsorption performance for thiophenics compared to PdO/SiO2, attributed to the incorporation of GO increasing specific surface area and Pd incorporation rate, with Pd2+ ions and GO acting as important adsorption centers. The adsorption process was spontaneous and exothermic, following the second-order kinetic model dominated by chemical interaction.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Article
Engineering, Chemical
Fan Yang et al.
Summary: LiX@ZIF-8 is a core-shell nanomaterial with high CO2 adsorption capacity, suitable for CO2 capture in highly humid flue gas. This study investigates the CO2/N-2 separation performance and adsorption kinetics, and proposes a model to predict the adsorption behavior of LiX@ZIF-8.
Article
Engineering, Chemical
Omid Amiri et al.
Summary: Mechanical energy is a renewable natural energy that can be harnessed using piezoelectric materials. Piezocatalysis offers a promising solution to water pollution. This research focused on the synthesis and properties of PbTiO3 (PTO) piezocatalyst, showing the significant influence of synthesis parameters and operation conditions on its activity. The degradation reaction was found to be completed within the first hour, achieving a high degradation efficiency of Acid Red 141 (AR141) under controlled conditions.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Green & Sustainable Science & Technology
C. M. Becker et al.
Summary: This paper conducts a systematic review of recent studies on desulfurization technologies, extracting information from 51 articles to identify trends, potentials, and limitations of each technique. The study reveals that experiments with lower hydrogen sulfide concentrations result in higher efficiencies, with over 80% of the articles reporting H2S removal efficiencies exceeding 80%. Promising desulfurization methods highlighted include a trickling filter system, biodesulfurization and bioscrubbing processes, a photocatalytic desulfurizer, and micro-aeration tests.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2022)
Review
Energy & Fuels
Hyeonseo Joo et al.
Summary: With the growing concern about the safety of workplaces and living spaces, the development of fast and accurate real-time safety monitoring systems has become essential. Self-powered gas sensors that do not require an additional power source are gaining attention as they can be used anytime, anywhere with a wireless sensor system.
Review
Energy & Fuels
Abdurrashid Haruna et al.
Summary: Fuel oil consumption has increased due to rapid population growth, but its pollution issues have become a major threat to the petrochemical industry. Developed nations have imposed restrictions on sulfur in fuel oil to mitigate the environmental and health concerns. This review discusses various desulfurization technologies and highlights the importance of developing green fuel oil.
Article
Engineering, Environmental
Shengqin Guan et al.
Summary: A study on deep eutectic solvents (DESs) based on cyclodextrins (CDs) as extractants and catalysts for extraction combined with oxidative desulfurization (EODS) of fuel oil was conducted. The DESs showed high catalytic activity and resulted in a sulfur removal rate of 99.6% under optimal conditions. Peroxy-compounds were identified as the predominant active species, and the DESs based on CDs decreased the reaction barrier in the EODS process by 81%. The structural deformation of DBT was confirmed through observing the vibration of the interaction between DES and DBT.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Wei Jiang et al.
Summary: By using single-atom chromium catalysts on multiwalled carbon nanotubes, efficient oxidative desulfurization reactions have been achieved, with promising catalytic performance and cycling stability, providing a potential catalyst for sulfur removal in practical fuels.
Article
Nanoscience & Nanotechnology
Suvankar Deka et al.
Summary: This study reports the photocatalytic, piezocatalytic, and piezo-photocatalytic responses of bismuth vanadate nanorods under ultrasonic frequency and visible light excitation. The piezo-photocatalytic method efficiently degrades dyes and inactivates bacteria.
ACS APPLIED NANO MATERIALS
(2022)
Article
Chemistry, Physical
Xiaoyu Zhou et al.
Summary: The high efficiency of Ag2O/Na-CN composite photocatalyst in PODS was investigated, with Na doping increasing carrier concentration and lifetime, facilitating the generation of radical species and separation of charge carriers, making the oxidation process smoother.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2022)
Article
Energy & Fuels
Xin An et al.
Summary: A hollow mesoporous silica nanosphere supported cobalt molybdate catalyst was prepared using a dissolution-regrowth strategy, which exhibited outstanding desulfurization efficiency in oxidative desulfurization and could be reused.
Article
Engineering, Chemical
Savana J. Ismael et al.
Summary: This paper focuses on the synthesis and characterization of La1-xMn1-yO3 nanostructures as an efficient piezo catalyst for treating pharmaceutical waste. The performance of the catalyst in degrading various drugs was evaluated, and the effects of different parameters on degradation efficiency were investigated. The results showed that the prepared catalysts could degrade the drugs waste by over 90%.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Multidisciplinary Sciences
Karukh A. Babakr et al.
Summary: Mechanical energy harvesting using piezoelectric materials for catalysis reactions shows great potential for environmental remediation. In this study, SbSI/Sb2S3 nanocomposites were synthesized as a catalyst and ZrO2 balls were used as an alternative mechanical force to ultrasonic vibration. The effects of different mechanical forces, the number of ZrO2 balls, and reaction temperature on the degradation efficiency were investigated. The use of ZrO2 balls resulted in a 47% enhancement in degradation efficiency compared to ultrasonic vibration at 30 +/- 5 degrees C.
SCIENTIFIC REPORTS
(2022)
Article
Chemistry, Physical
Yingying Wen et al.
Summary: This study investigates the effect of hydrodynamic factors on the performance of water-driven piezo-enhanced photocatalysis. The results reveal that velocity and the porous structure of the substrate significantly impact the piezo-photocatalytic process, enhancing the catalytic performance. The findings provide a feasible method for in-situ purification of pollutants in urban sewerage and drainage.
Article
Engineering, Chemical
Savana J. Ismael et al.
Summary: This paper investigates the synthesis and characterization of La1_ xMn1_yO3 nanostructures as a piezo catalyst for the treatment of medical waste. The catalysts were analyzed using various techniques and the effects of catalyst dosage, drug concentration, pH, and ultrasonic power on degradation efficiency were studied.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Biotechnology & Applied Microbiology
Asmaa S. Morshedy et al.
Summary: The study utilized a well-prepared imprinted nanocomposite polymer as a highly photo-active material for oxidative desulfurization process, achieving a high efficiency of dibenzothiophene degradation. By adjusting experimental parameters such as radiation source, catalyst dosage, reaction time, and addition of oxidizing agents, sulfur compounds can be rapidly removed at room temperature. The material exhibited not only efficient desulfurization under optimal conditions, but also excellent recyclability for multiple uses.
ENVIRONMENTAL TECHNOLOGY & INNOVATION
(2021)
Review
Chemistry, Multidisciplinary
Xiaoyu Zhou et al.
Summary: Fuel oil is a crucial strategic resource used in industrial applications, but the sulfur-containing compounds in it pose environmental and health risks. Photocatalytic desulfurization has emerged as a promising solution for deep desulfurization with its advantages of milder operating conditions, lower energy consumption, and higher efficiency.
Review
Green & Sustainable Science & Technology
Iqrash Sha et al.
Summary: The production of greener refinery products is crucial for maintaining a healthy environment globally. The challenges in amputating refractory organosulfur compounds have led to the development of deep oxidative desulfurization technology using molecular oxygen as an alternative oxidant. However, activating molecular oxygen under mild circumstances remains a challenge, despite recent advances in efficient materials for deep aerobic desulfurization.
JOURNAL OF CLEANER PRODUCTION
(2021)
Article
Energy & Fuels
Wei Jiang et al.
Summary: In this study, a hollow silica confined defective molybdenum oxide catalyst was successfully prepared, demonstrating higher activity and desulfurization efficiency compared to a solid silica-supported catalyst. Oxygen defects were found to play a positive role in promoting oxidation reactions, and the catalyst exhibited good stability and selectivity, making it a promising candidate for industrial applications.
Article
Materials Science, Ceramics
Zhaowei Liu et al.
Summary: In this study, thorn-like BaTiO3-TiO2 composite nanofibers were successfully prepared, exhibiting excellent photocatalytic performance and recyclability, sensitive to water flow and capable of effectively utilizing tiny water vibration energy. The scavenger study indicated that superoxide radicals and hydroxyl radicals were the main factors to improve the photodegradation activity.
CERAMICS INTERNATIONAL
(2021)
Article
Chemistry, Physical
Jimin Gu et al.
Summary: In this study, a piezo-transmittance based strain sensor using auxetic-patterned elastomer was developed to overcome limitations of traditional sensors, achieving high uniformity and customizable response.
Article
Engineering, Environmental
Peng Zhang et al.
Summary: Adsorption desulfurization using metal-organic frameworks such as UiO-66 has shown promising results in the removal of thiophenic compounds from fuels. A novel hierarchical-pore UiO-66 with increased specific surface area and porosity was developed for enhanced adsorption of larger adsorbates. The Ag+-exchanged hierarchical-pore UiO-66 exhibited high adsorption capacity for thiophene and benzothiophene, as well as the ability to maintain adsorptive performance in the presence of toluene, with good regeneration potential.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Iqrash Shafiq et al.
Summary: Oxidative desulfurization (ODS) is an effective method for removing organosulfur compounds at mild conditions without the need for costly hydrogen. In this study, a pure LaVO4 photocatalyst was prepared and found to exhibit excellent visible-light-driven deep oxidative desulfurization performance. The photocatalyst showed great potential for desulfurization of various petroleum refinery diesel pool fractions, with a possible mechanism proposed and recyclability discussed.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
(2021)
Article
Materials Science, Multidisciplinary
Hina Sugimoto et al.
Summary: A scaffold with high antimicrobial properties was successfully fabricated using (Ba, Ca)(Ti, Zr)O3 (BCTZ) and coated with 13-93 bioactive glass. The polarized surface of the BCTZ scaffold showed a good antibacterial response, resulting in a significant reduction in the survival rate of Escherichia coli bacteria. Overall, this approach can improve biocompatibility, prevent ion leaching, and provide good antibacterial characteristics to the scaffolds.
Article
Engineering, Chemical
Juncong Zou et al.
Summary: The developed catalyst Mo/KIT-6-Ti shows excellent oxidative desulfurization performance, achieving efficient conversion of sulfides without the need for organic solvents, demonstrating great potential for practical fuel applications.
SEPARATION AND PURIFICATION TECHNOLOGY
(2021)
Review
Chemistry, Physical
Xian Bin Lim et al.
Summary: The increase in pollution due to fossil fuel consumption has led to an environmental crisis, prompting the need to reduce sulfur oxide emissions. As the world moves towards green chemistry, the importance of fuel desulfurization driven by clean technology is emphasized. Among various techniques, oxidative desulfurization (ODS) is highlighted for its mild reaction conditions and effective desulfurization performance in producing sulfur-free fuels.
NANOSCALE HORIZONS
(2021)
Article
Engineering, Chemical
Hanlu Wang et al.
FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING
(2020)
Article
Chemistry, Multidisciplinary
Jing He et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2020)
Article
Engineering, Environmental
Wei Jiang et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Engineering, Environmental
Omid Amiri et al.
JOURNAL OF HAZARDOUS MATERIALS
(2020)
Article
Materials Science, Ceramics
Zhenhai Ning et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
(2020)
Article
Energy & Fuels
Hui Wang et al.
Review
Biotechnology & Applied Microbiology
Shuiquan Chen et al.
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY
(2018)
Article
Environmental Studies
Margarita M. Balmaceda
ENERGY RESEARCH & SOCIAL SCIENCE
(2018)
Article
Chemistry, Multidisciplinary
Hongying Lue et al.
CHEMICAL COMMUNICATIONS
(2015)
Review
Chemistry, Multidisciplinary
Prashant S. Kulkarni et al.
Article
Materials Science, Ceramics
Hwi-Yeol Park et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
(2010)
Article
Physics, Applied
CW Ahn et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS
(2005)
Article
Multidisciplinary Sciences
J Chow et al.
