☆ 4.7 Article

Heat and mass transfer analysis for magnetized flow of ZnO-SAE50 nanolubricant with variable properties: an application of Cattaneo-Christov model

SCIENTIFIC REPORTS (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Applied

Magnetohydrodynamic squeezing Casson nanofluid flow between parallel convectively heated disks

J. C. Umavathi et al.

Summary: In this paper, the flow of Casson liquid between two heated disks is analyzed using the Buongiorno model. The impact of heat source/sink and activation energy on heat and mass transport is considered. The equations governing the flow are derived and solved numerically, and the effect of embedding different physical parameters on the flow is analyzed.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2023)

Add to Collection

Article Thermodynamics

The effects of nanoparticle aggregation and radiation on the flow of nanofluid between the gap of a disk and cone

Fuzhang Wang et al.

Summary: This article focuses on the heat transfer in three-dimensional coordinates using a cone-disk apparatus and a nanofluid. The study shows that the aggregation of nanoparticles has a positive impact on heat transfer, and increasing the radiation parameter further improves heat transfer efficiency.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Physics, Applied

Heat transfer analysis in three-dimensional unsteady magnetic fluid flow of water-based ternary hybrid nanofluid conveying three various shaped nanoparticles: A comparative study

R. Naveen Kumar et al.

Summary: This research focuses on the heat transport analysis of three-dimensional unsteady flow of non-Newtonian nanofluid. A comparison between water-based ternary hybrid nanofluid and ZnO-SAE50Nanolubricant is made using two different models. The results show that ZnO-SAE50Nanolubricant exhibits the highest heat transport when the radiation parameter increases.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2022)

Add to Collection

Article Physics, Multidisciplinary

Heat and mass transfer analysis of radiative fluid flow under the influence of uniform horizontal magnetic field and thermophoretic particle deposition

B. C. Prasannakumara et al.

Summary: This study examines the effect of thermophoretic particle deposition on liquid flow across a rotating disk using a horizontal magnetic field to regularize the flow field. The energy equation when exposed to thermal radiation is also investigated. Numerical solutions show that an increase in magnetic parameter decreases both axial and radial velocity profiles, while an increase in thermophoretic parameters and coefficient reduces mass transport.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Physics, Applied

Dynamics of nanoparticle diameter and interfacial layer on flow of non-Newtonian (Jeffrey) nanofluid over a convective curved stretching sheet

R. J. Punith Gowda et al.

Summary: This study examines the steady flow of a Jeffrey nanofluid stimulated by the linear stretching of a curved sheet, with graphene nanoparticles affecting heat transfer. Results show that parameters such as curvature, heat source, and convective parameters influence nanofluid velocity, heat transmission, and heat transport rate.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2022)

Add to Collection

Article Physics, Multidisciplinary

Bioconvection in radiative Glauert wall jet flow of nanofluid: a Buongiorno model

M. D. Alsulami et al.

Summary: This study investigates the laminar Glauert wall jet flow in the presence of bioconvection, slip and suction using the Buongiorno model. The results show that increasing values of Brownian motion, radiation, and thermophoresis parameters enhance the thermal profile, while increasing values of concentration difference and bioconvection Peclet numbers decay the microorganism profile. The rate of heat transfer decreases with increasing thermophoresis parameter and increases with higher radiation parameter.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Thermodynamics

Impact of exponential form of internal heat generation on water-based ternary hybrid nanofluid flow by capitalizing non-Fourier heat flux model

K. Sarada et al.

Summary: This article investigates the convective boundary layer flow of ternary hybrid nanofluid (water-based graphene-CNT-Silver) over a curved stretching sheet with activation energy, considering the non-Fourier heat flux model. The results reveal the influence of various parameters on thermal, concentration, and velocity profiles. The heat transport in ternary hybrid nanoliquid increases with higher thermophoresis and Brownian motion parameters, while the Biot number positively affects the thermal profile and the Schmidt number and Stefan blowing parameter values reduce mass transport.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Physics, Multidisciplinary

Slip flow of Casson-Maxwell nanofluid confined through stretchable disks

R. J. P. Gowda et al.

Summary: This study investigates the flow of incompressible electrically conducting Casson-Maxwell fluid confined between two uniformly stretchable disks, implementing the Buongiorno nanofluid model. The study examines the effects of physical parameters on velocity, thermal, and concentration fields through numerical solutions. The findings show that different parameters have varying degrees of influence on the flow characteristics, with the Maxwell liquid being more sensitive to Lorentz force compared to Casson liquid.

INDIAN JOURNAL OF PHYSICS (2022)

Add to Collection

Article Physics, Multidisciplinary

Exploring the impact of magnetic dipole on the radiative nanofluid flow over a stretching sheet by means of KKL model

Manish Anand

Summary: This study focuses on the rheological properties of nanofluids using the Koo-Kleinstreuer-Li model. The numerical results show that increasing the radiation parameter improves the thermal profile, while increasing the Biot number enhances the thermal boundary layer region. Additionally, an increase in the space-dependent internal heat sink/source parameter deteriorates the rate of heat transfer.

PRAMANA-JOURNAL OF PHYSICS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Thermophoresis particle deposition analysis for nonlinear thermally developed flow of Magneto-Walter's B nanofluid with buoyancy forces

Yu-Ming Chu et al.

Summary: This study discusses the thermophoresis particle deposition effects of magneto-Walter's B nanofluid induced by a stretched surface under the action of pressure and buoyant forces, utilizing the Buongiorno nanofluid model. The analysis incorporates chemical reaction, Joule heating, and non-linear radiation relations, with the results showing that the heat thermal Biot number, thermophoretic constant, and viscoelastic parameter increase the nanofluid temperature and concentration while a decaying concentration profile is observed for the Schmidt number.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Multidisciplinary Sciences

Features of Cu and TiO2 in the flow of engine oil subject to thermal jump conditions

Sohail Ahmad et al.

Summary: The recent study examines the heat transfer properties in engine oil flow containing nanoparticles, using quasi-linearization numerical technique to solve complex coupled differential equations and obtain numerical solutions. The research finds that the flow and heat transfer of Cu-TiO2 in the flow are significantly affected by thermal jump conditions and porous media, resulting in a reduction of temperature and heat transport rate under preeminent parameters.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Thermodynamics

Solar radiation effects on MHD stagnation point flow and heat transfer of a nanofluid over a stretching sheet

S. E. Ghasemi et al.

Summary: This study investigates the influences of solar radiation on two-dimensional stagnation point flow of nanofluid over a stretching sheet, considering the effect of magnetic field and thermal radiation. Numerical results demonstrate the method's accuracy, convergence, and potential. It is found that temperature and thermal boundary layer thickness are increasing functions of Biot number, and that higher Brownian motion parameter values result in greater temperature values and thicker thermal boundary layer.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Thermal variable conductivity features in Buongiorno nanofluid model between parallel stretching disks: Improving energy system efficiency

A. Aldabesh et al.

Summary: This study analyzes the axisymmetric behavior of Casson nano-material between two stretchable disks using the Buongiorno nanofluid model. Similarity transformations are used to convert the governing equations into dimensionless form, and a homotopic procedure is suggested to determine the solution. The effects of various parameters on dimensionless velocity and temperature profiles are observed, with particular attention to the role of Brownian motion and thermophoresis diffusion parameters.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Variable thermal effects of viscosity and radiation of ferrofluid submerged in porous medium

Munazza Saeed et al.

Ain Shams Engineering Journal (2021)

Add to Collection

Article Thermodynamics

Inspection of convective heat transfer and KKL correlation for simulation of nanofluid flow over a curved stretching sheet

R. Naveen Kumar et al.

Summary: The study focuses on the flow of nanofluid over a curved stretching sheet, discussing heat and mass transfer, activation energy, and the use of CuO with waterbased nanofluid in the model. By utilizing the Koo-Kleinstreuer-Li (KKL) model, the viscosity and effective thermal conductivity of the fluid suspended by nanoparticles are examined. The results reveal the impact of non-dimensional parameters on thermal gradient and mass transfer in the nanofluid flow.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Magnetized flow of sutterby nanofluid through cattaneo-christov theory of heat diffusion and stefan blowing condition

R. J. Punith Gowda et al.

Summary: In this research, the Stefan blowing phenomenon in electrically conducting Sutterby material flow over a stretchable rotating disk is demonstrated. The CC model and Buongiorno model are adopted to analyze energy diffusion and evaluate the involvement of nanoparticles. The re-structured system of partial differential expressions is solved using RKF process to communicate the solution of velocity, thermal and solutal fields, with results showing the influence of Stefan blowing factor on velocity gradients and nanomaterial speed, as well as the impact of magnetic parameter values on liquid velocity and temperature.

APPLIED NANOSCIENCE (2021)

Add to Collection

Article Physics, Multidisciplinary

Aspects of Chemical Entropy Generation in Flow of Casson Nanofluid between Radiative Stretching Disks

Nargis Khan et al.

ENTROPY (2020)

Add to Collection

Article Multidisciplinary Sciences

Novel Physical Insights into the Thermodynamic Irreversibilities Within Dissipative EMHD Fluid Flows Past over a Moving Horizontal Riga Plate in the Coexistence of Wall Suction and Joule Heating Effects: A Comprehensive Numerical Investigation

Abderrahim Wakif et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Physics, Multidisciplinary

Galerkin Finite Element Study on the Effects of Variable Thermal Conductivity and Variable Mass Diffusion Conductance on Heat and Mass Transfer

Imran Haider Qureshi et al.

COMMUNICATIONS IN THEORETICAL PHYSICS (2018)

Add to Collection

Article Physics, Condensed Matter

Entropy generation minimization (EGM) of nanofluid flow by a thin moving needle with nonlinear thermal radiation

M. Waleed Ahmed Khan et al.

PHYSICA B-CONDENSED MATTER (2018)

Add to Collection

Article Thermodynamics

Impact of radiation in a stagnation point flow of Walters' B fluid towards a Riga plate

Anum Shafiq et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Combined impact of viscosity variation and Lorentz force on slip flow of radiative nanofluid towards a vertical stretching surface with convective heat and mass transfer

Z. Iqbal et al.

ALEXANDRIA ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

An experimental evaluation of the effect of ZnO nanoparticles on the rheological behavior of engine oil

Kamran Sepyani et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Engineering, Mechanical

An electro-magneto-hydrodynamic flow Maxwell nanoliquid past a Riga plate: a numerical study

G. K. Ramesh et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A framework for nonlinear thermal radiation and homogeneous-heterogeneous reactions flow based on silver-water and copper-water nanoparticles: A numerical model for probable error

Sumaira Qayyum et al.

RESULTS IN PHYSICS (2017)

Add to Collection

Article Thermodynamics

Cattaneo-Christov heat flux model for heat transfer of Marangoni boundary layer flow in a copper-water nanofluid

Xiaoqin Xu et al.

HEAT TRANSFER-ASIAN RESEARCH (2017)

Add to Collection

Article Mathematics

MHD flow and heat transfer characteristics of Williamson nanofluid over a stretching sheet with variable thickness and variable thermal conductivity

Srinivas C. Reddy et al.

TRANSACTIONS OF A RAZMADZE MATHEMATICAL INSTITUTE (2017)

Add to Collection

Article Physics, Multidisciplinary

Effects of Variable Thermal Conductivity and Non-linear Thermal Radiation Past an Eyring Powell Nanofluid Flow with Chemical Reaction

M. Ramzan et al.

COMMUNICATIONS IN THEORETICAL PHYSICS (2017)

Add to Collection

Review Thermodynamics

Recent progress on hybrid nanofluids in heat transfer applications: A comprehensive review

Nor Azwadi Che Sidik et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Flow of nanofluid past a Riga plate

Adeel Ahmad et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Thermophoresis particle deposition and internal heat generation on MHD flow of an Oldroyd-B nanofluid between radiative stretching disks

N. Khan et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Chemistry, Physical

Cattaneo-Christov heat flux model for flow of variable thermal conductivity generalized Burgers fluid

M. Waqas et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Engineering, Chemical

Heat transfer and flow analysis of nanofluid flow induced by a stretching sheet in the presence of an external magnetic field

O. Pourmehran et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)

Add to Collection

Article Engineering, Mechanical

Roles of nanoparticles in oil lubrication

Wei Dai et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Nanoscience & Nanotechnology

MHD effects and heat transfer for the UCM fluid along with Joule heating and thermal radiation using Cattaneo-Christov heat flux model

S. Shah et al.

AIP ADVANCES (2016)

Add to Collection

Article Physics, Multidisciplinary

Numerical solutions of Magnetohydrodynamic boundary layer flow of tangent hyperbolic fluid towards a stretching sheet

N. S. Akbar et al.

INDIAN JOURNAL OF PHYSICS (2013)

Add to Collection

Article Engineering, Chemical

Heat transfer in a fluid through a porous medium over a permeable stretching surface with thermal radiation and variable thermal conductivity

Rafael Cortell

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2012)

Add to Collection

Article Engineering, Chemical

Boundary layer flow and heat transfer over a stretching sheet with Newtonian heating

M. Z. Salleh et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2010)

Add to Collection

Article Mechanics

On frame indifferent formulation of the Maxwell-Cattaneo model of finite-speed heat conduction

C. I. Christov

MECHANICS RESEARCH COMMUNICATIONS (2009)

Add to Collection

Article Computer Science, Software Engineering

A BVP solver based on residual control and the MATLAB PSE

J Kierzenka et al.

ACM TRANSACTIONS ON MATHEMATICAL SOFTWARE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.