4.6 Article

A Numerical Study of Crack Mixed Mode Model in Concrete Material Subjected to Cyclic Loading

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Modeling Cyclic Crack Propagation in Concrete Using the Scaled Boundary Finite Element Method Coupled with the Cumulative Damage-Plasticity Constitutive Law

Omar Alrayes et al.

Summary: The paper presents a numerical modeling approach using a scaled boundary finite element model (SBFEM) to simulate crack growth, with a focus on the stress field under monotonic and cyclic loading conditions. A new constitutive law is applied to describe the cohesive response, allowing for the modeling of crack propagation and damage accumulation. The method is validated through the analysis of single-edge-notched concrete beam subjected to three-point bending under different loading conditions, with good agreement between simulation results and experimental measurements.

MATERIALS (2023)

Article Engineering, Multidisciplinary

Coupled sliding-decohesion-compression model for a consistent description of monotonic and fatigue behavior of material interfaces

Rostislav Chudoba et al.

Summary: This study proposes a thermodynamically consistent model for computational components, which captures the 3D kinematics of interfaces under different loading histories. The model introduces novel forms of potentials for free energy, threshold function, and dissipation, and incorporates features such as damage development, general time integration, and coupling between normal and tangential damage evolution.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

Article Construction & Building Technology

Corrosion effects on the capacity and ductility of concrete half-joint bridges

Marco Martino Rosso et al.

Summary: Monitoring and evaluating the deterioration of structures, particularly bridges and overpasses, is a significant challenge. This study examines the impact of corrosion on the capacity and ductility of two case studies involving half-joints, showing different behavior between the two cases.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Fracture mechanics based interpretation of the load sequence effect in the flexural fatigue behavior of concrete using digital image correlation

Abedulgader Baktheer et al.

Summary: This paper presents experimental investigations on concrete behavior under monotonic, cyclic, and fatigue loading, with a particular focus on the influence of loading sequence on fatigue life. The study evaluates various response characteristics of fatigue behavior and analyzes the main dissipative mechanisms governing the flexural behavior of concrete under repeated loading. Additionally, the effect of loading sequence is studied in detail using a 3D digital image correlation (DIC) system, providing a theoretical interpretation considering fatigue crack propagation aspects and stress redistribution around the crack tip.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Mechanical

Microplane fatigue model MS1 for plain concrete under compression with damage evolution driven by cumulative inelastic shear strain

Abedulgader Baktheer et al.

Summary: The study introduces a new mathematical modeling approach for concrete fatigue behavior under compressive loading, aiming to capture the tri-axial stress redistribution and fatigue damage mechanisms at subcritical load levels. Through experimental validation, the model demonstrates high consistency and accuracy in simulating the response of concrete under various loading scenarios.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Article Chemistry, Physical

Mode II Behavior of High-Strength Concrete under Monotonic, Cyclic and Fatigue Loading

Henrik Becks et al.

Summary: Designing economically efficient and safe concrete structures under high-cycle fatigue loading is challenging due to the complex nature of fatigue damage phenomenology of concrete. Shear sliding is a key factor governing fatigue damage evolution in concrete at subcritical load levels. The fatigue behavior of high-strength concrete under mode II loading was investigated using punch through shear tests, revealing that shear stress range has a greater impact on fatigue life than compressive stress in the ligament.

MATERIALS (2021)

Article Construction & Building Technology

High-cycle fatigue of bond in reinforced high-strength concrete under push-in loading characterized using the modified beam-end test

Abedulgader Baktheer et al.

Summary: This paper presents combined experimental-numerical investigations of the bond behavior between high-strength concrete and steel reinforcement under various loading scenarios. Different bond lengths, concrete strengths, and bar diameters were studied, leading to the observation of push-through and combined push-through-splitting failure modes. The results will contribute to further detailed theoretical research on the bond fatigue phenomenology governing the behavior of reinforced concrete structures.

CEMENT & CONCRETE COMPOSITES (2021)

Article Engineering, Multidisciplinary

A cohesive XFEM model for simulating fatigue crack growth under mixed-mode loading and overloading

R. Dekker et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2019)

Article Construction & Building Technology

Classification and evaluation of phenomenological numerical models for concrete fatigue behavior under compression

Abedulgader Baktheer et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Multidisciplinary

Automatic image-based stress analysis by the scaled boundary finite element method

Albert Saputra et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2017)

Article Materials Science, Multidisciplinary

Crack propagation modelling in concrete using the scaled boundary finite element method with hybrid polygon-quadtree meshes

E. T. Ooi et al.

INTERNATIONAL JOURNAL OF FRACTURE (2017)

Article Construction & Building Technology

Micro-scale continuous and discrete numerical models for nonlinear analysis of masonry shear walls

Massimo Petracca et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Materials Science, Multidisciplinary

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Xiangting Su et al.

ACTA MECHANICA SOLIDA SINICA (2013)

Article Engineering, Multidisciplinary

Analysis of quadruple corner-cut ridged square waveguide using a scaled boundary finite element method

Jun Liu et al.

APPLIED MATHEMATICAL MODELLING (2012)

Article Engineering, Multidisciplinary

Polygon scaled boundary finite elements for crack propagation modelling

Ean Tat Ooi et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2012)

Article Engineering, Geological

Modeling of dynamic cohesive fracture propagation in porous saturated media

A. R. Khoei et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2011)

Article Engineering, Mechanical

A fatigue degradation law for cohesive interface elements - Development and application to composite materials

Paul W. Harper et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

Article Engineering, Multidisciplinary

Modelling multiple cohesive crack propagation using a finite element-scaled boundary finite element coupled method

E. T. Ooi et al.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2009)

Article Engineering, Mechanical

Cohesive fracture simulation and failure modes of FRP-concrete bonded interfaces

Pizhong Qiao et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2008)

Article Mechanics

Crack opening conditions at 'corner nodes' in FE analysis with cracking along mesh lines

Daniela Ciancio et al.

ENGINEERING FRACTURE MECHANICS (2007)

Article Mathematics, Interdisciplinary Applications

A meshfree method based on the local partition of unity for cohesive cracks

Timon Rabczuk et al.

COMPUTATIONAL MECHANICS (2007)

Article Engineering, Geological

Continuum damage mechanics for hysteresis and fatigue of quasi-brittle materials and structures

R. Desmorat et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2007)

Article Engineering, Multidisciplinary

Modelling of cohesive crack growth in concrete structures with the extended finite element method

Joerg F. Unger et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)

Article Engineering, Mechanical

An embedded cohesive crack model for finite element analysis of mixed mode fracture of concrete

J. M. Sancho et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2006)

Article Engineering, Mechanical

Damage model for fatigue loading of concrete

A Alliche

INTERNATIONAL JOURNAL OF FATIGUE (2004)

Article Mechanics

Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading

N Blanco et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)

Article Engineering, Multidisciplinary

Computational model for discrete crack growth in plain and reinforced concrete

MVKV Prasad et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2002)

Article Engineering, Multidisciplinary

Three-dimensional cohesive modeling of dynamic mixed-mode fracture

G Ruiz et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)

Article Mechanics

A cohesive zone model for fatigue crack growth in quasibrittle materials

B Yang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)

Article Engineering, Multidisciplinary

The scaled boundary finite-element method - a fundamental solution-less boundary-element method

JP Wolf et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2001)