Related references
Note: Only part of the references are listed.Hydrothermal aging mechanisms and service life prediction of twisted bamboo fiber wound composites
Jiangjing Shi et al.
MATERIALS & DESIGN (2023)
Life-cycle and environmental impact assessments on processing of plant fibres and its bio-composites: A critical review
M. Ramesh et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
Dual cantilever creep and recovery behavior of sisal/hemp fibre reinforced hybrid biocomposites: Effects of layering sequence, accelerated weathering and temperature
K. Senthilkumar et al.
JOURNAL OF INDUSTRIAL TEXTILES (2022)
A Competitive Study of the Static and Fatigue Performance of Flax, Glass, and Flax/Glass Hybrid Composites on the Structural Example of a Light Railway Axle Tie
Nina Graupner et al.
FRONTIERS IN MATERIALS (2022)
Advances in Natural-Fiber-Reinforced Composites: A Topical Review
H. Prajapati et al.
MECHANICS OF COMPOSITE MATERIALS (2022)
Surface treatment to improve water repellence and compatibility of natural fiber with polymer matrix: Recent advancement
Mohammed Mohammed et al.
POLYMER TESTING (2022)
Fatigue and impact strengths of kenaf fibre reinforced polypropylene composites: effects of fibre treatments
Oscar Asumani et al.
ADVANCED COMPOSITE MATERIALS (2021)
Enhancement of Static and Fatigue Strength of Short Sisal Fiber Biocomposites by Low Fraction Nanotubes
A. Pantano et al.
APPLIED COMPOSITE MATERIALS (2021)
Damping behavior of plant fiber composites: A review
Taiqu Liu et al.
COMPOSITE STRUCTURES (2021)
Influence of the stress level and hygrothermal conditions on the creep/recovery behaviour of high-grade flax and hemp fibre reinforced GreenPoxy matrix composites
Benjamin Sala et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites
Ng Lin Feng et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2020)
Improvement of the fatigue behaviour of cellulose/polyolefin composites using photo-chemical fibre surface modification bio-inspired by natural role models
Joerg Muessig et al.
CELLULOSE (2020)
Current status of carbon fibre and carbon fibre composites recycling
Jin Zhang et al.
COMPOSITES PART B-ENGINEERING (2020)
High performances of plant fiber reinforced composites-A new insight from hierarchical microstructures
Zhongsen Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Quantitative investigations on multi-layer interface debonding behaviors for sisal fiber reinforced composites using acoustic emission and finite element method
Qian Li et al.
COMPOSITES PART B-ENGINEERING (2020)
A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: fibre recovery, properties and life-cycle analysis
Sankar Karuppannan Gopalraj et al.
SN APPLIED SCIENCES (2020)
Tensile creep behaviour of unidirectional flax fibre reinforced bio-based epoxy composites
Yunlong Jia et al.
COMPOSITES COMMUNICATIONS (2020)
Effect of Moisture in Flax Fibres on the Quality of their Composites
Abdul Moudood et al.
JOURNAL OF NATURAL FIBERS (2019)
The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites
Jyun-Kai Huang et al.
COMPOSITES PART B-ENGINEERING (2019)
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Dipen Kumar Rajak et al.
POLYMERS (2019)
Flax fiber and its composites: An overview of water and moisture absorption impact on their performance
Abdul Moudood et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Multiscale Control of Nanocellulose Assembly: Transferring Remarkable Nanoscale Fibril Mechanics to Macroscale Fibers
Nitesh Mittal et al.
ACS NANO (2018)
Fatigue of flax-epoxy and other plant fibre composites: Critical review and analysis
Zia Mahboob et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Coating applications to natural fiber composites to improve their physical, surface and water absorption characters
Zengshe Liu et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Towards the design of high-performance plant fibre composites
Alain Bourmaud et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Processing bulk natural wood into a high-performance structural material
Jianwei Song et al.
NATURE (2018)
Green Composites: A Review
Sharath H. S. Shekar et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Review of the Applications of Biocomposites in the Automotive Industry
Obed Akampumuza et al.
POLYMER COMPOSITES (2017)
Mechanical and Moisture Absorption Characterization of PLA Composites Reinforced with Nano-coated Flax Fibers
Marie Bayart et al.
FIBERS AND POLYMERS (2017)
Interdependence of moisture, mechanical properties, and hydrophobic treatment of jute fibre-reinforced composite materials
Muhammad Haris Ameer et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Bio-based coatings for reducing water sorption in natural fibre reinforced composites
T. H. Mokhothu et al.
SCIENTIFIC REPORTS (2017)
Cellulose long fibers fabricated from cellulose nanofibers and its strong and tough characteristics
Abdullahil Kafy et al.
SCIENTIFIC REPORTS (2017)
A micromechanical model of interfacial debonding and elementary fiber pull-out for sisal fiber-reinforced composites
Qian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Nanoscale evaluation of multi-layer interfacial mechanical properties of sisal fiber reinforced composites by nanoindentation technique
Qian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Hygroscopic expansion: A key point to describe natural fibre/polymer matrix interface bond strength
Antoine le Duigou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Super-Strong, Super-Stiff Macrofibers with Aligned, Long Bacterial Cellulose Nanofibers
Sha Wang et al.
ADVANCED MATERIALS (2017)
Macrofibers with High Mechanical Performance Based on Aligned Bacterial Cellulose Nanofibers
Jingjing Yao et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Interface and bonding mechanisms of plant fibre composites: An overview
Yonghui Zhou et al.
COMPOSITES PART B-ENGINEERING (2016)
Hygrothermal effects on fatigue behavior of quasi-isotropic flax/epoxy composites using principal component analysis
Fabrice Kossi Sodoke et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Hydrothermal ageing mechanisms of unidirectional flax fabric reinforced epoxy composites
Yan Li et al.
POLYMER DEGRADATION AND STABILITY (2016)
Plant Fibre: Molecular Structure and Biomechanical Properties, of a Complex Living Material, Influencing Its Deconstruction towards a Biobased Composite
Mathias Sorieul et al.
MATERIALS (2016)
Review on hygroscopic aging of cellulose fibres and their biocomposites
Thabang H. Mokhothu et al.
CARBOHYDRATE POLYMERS (2015)
Comparative evaluation of fiber treatments on the creep behavior of jute/green epoxy composites
Jiri Militky et al.
COMPOSITES PART B-ENGINEERING (2015)
Tension-tension fatigue behaviour of woven flax/epoxy composites
Soroush Asgarinia et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Effect of Chemical Treatment of Flax Fiber and Resin Manipulation on Service Life of Their Composites Using Time-Temperature Superposition
Ali Amiri et al.
POLYMERS (2015)
An evaluation of the effects of moisture content on the modulus of elasticity of a unidirectional flax fiber composite
Benjamin Masseteau et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Flax fibre and its composites - A review
Libo Yan et al.
COMPOSITES PART B-ENGINEERING (2014)
Fatigue of natural fiber thermoplastic composites
Ahmed Fotouh et al.
COMPOSITES PART B-ENGINEERING (2014)
Effects of humidity conditions at fabrication on the interfacial shear strength of flax/unsaturated polyester composites
Daohong Zhang et al.
COMPOSITES PART B-ENGINEERING (2014)
Tension-tension fatigue behaviour of woven hemp fibre reinforced epoxy composite: A multi-instrumented damage analysis
Davi S. de Vasconcellos et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Properties evolution of flax/epoxy composites under fatigue loading
Shaoxiong Liang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Energy intensity and environmental analysis of mechanical recycling of carbon fibre composite
Jack Howarth et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Hydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments
Karl M. O. Hakansson et al.
NATURE COMMUNICATIONS (2014)
Can flax replace E-glass in structural composites? A small wind turbine blade case study
Darshil U. Shah et al.
COMPOSITES PART B-ENGINEERING (2013)
Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams
Darshil U. Shah et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
A review on the degradability of polymeric composites based on natural fibres
Z. N. Azwa et al.
MATERIALS & DESIGN (2013)
Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites
C. Baley et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Critical review of recent publications on use of natural composites in infrastructure
David B. Dittenber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites
S. Liang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
A study on moisture absorption and swelling in bio-based jute-epoxy composites
Reza Masoodi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Fatigue Behavior of Kenaf Fibre Reinforced Epoxy Composites
Abdul Hakim Abdullah et al.
ENGINEERING JOURNAL-THAILAND (2012)
Cellulose nanomaterials review: structure, properties and nanocomposites
Robert J. Moon et al.
CHEMICAL SOCIETY REVIEWS (2011)
Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax-fibres and glass-fibres
M. Assarar et al.
MATERIALS & DESIGN (2011)
Life cycle energy analysis of fiber-reinforced composites
Young S. Song et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties
K. Charlet et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Wood-plastic composites as promising green-composites for automotive industries!
Alireza Ashori
BIORESOURCE TECHNOLOGY (2008)
Fatigue of sisal fibre reinforced composites: Constant-life diagrams and hysteresis loop capture
Arnold N. Towo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites
H. N. Dhakal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
Edwin Bodros et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Creep and dynamic mechanical behavior of PP-jute composites: Effect of the interfacial adhesion
Betiana A. Acha et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Exploring the micromechanical design of plant cell walls
Ingo Burgert
AMERICAN JOURNAL OF BOTANY (2006)
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
C Baley
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Effects of environmental conditions on mechanical and physical properties of flax fibers
A Stamboulis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Share Paper
