☆ 4.5 Article

Implementing the Analytical Reachable Body Workspace for Calculating the Obstacle-Crossing Ability of a Hexapod Robot

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2023)

Related references

Note: Only part of the references are listed.

Article Robotics

Cat-Like Jumping and Landing of Legged Robots in Low Gravity Using Deep Reinforcement Learning

Nikita Rudin et al.

Summary: This article demonstrates the application of learned policies to solve legged locomotion control tasks, using deep reinforcement learning to train a neural network to control a jumping quadruped robot in both simulated and real-world low-gravity environments. The study shows successful generalization and deployment of trained policies for repetitive controlled jumping and landing with natural agility.

IEEE TRANSACTIONS ON ROBOTICS (2022)

Add to Collection

Article Engineering, Mechanical

Real-time gait planning method for six-legged robots to optimize the performances of terrain adaptability and walking speed

Zhijun Chen et al.

Summary: This study proposes a novel gait planning method for six-legged robots to optimize both terrain adaptability and walking speed. Experimental results show significant improvements in key performance indicators, indicating the feasibility of the method in real-time control systems.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Robotics

Design and Control of a Novel Leg-Arm Multiplexing Mobile Operational Hexapod Robot

Teng Chen et al.

Summary: This letter proposes a novel legged robot named SDUHex, with 6 limbs and 20 proprioceptive motors. The limbs located in the middle of the robot can function as manipulators or locomotors. The design of the multi-mode robot is presented, along with the analysis of the kinematics and dynamics of the robot leg. A hierarchical optimized whole body controller, called VM-WBC, is proposed to unify foot locomotion and arm operation. Additionally, a terrain adaptation strategy is introduced to enhance the robot's ability to pass through non-flat terrains. A series of experiments are conducted to validate the robot and control method, demonstrating its robust locomotion and multiplexing function of the limbs.

IEEE ROBOTICS AND AUTOMATION LETTERS (2022)

Add to Collection

Article Engineering, Mechanical

Multi-mode unified modeling and operation capability synergistic evaluation for the reconfigurable legged mobile lander

Youcheng Han et al.

Summary: This paper presents the reconfigurable legged mobile lander (ReLML) with three operation modes to provide strong survivability to hostile extraterrestrial landforms. The system has a complete reconfigurable mechanism and can intelligently adapt to different landforms for stable landing and roving detection. The study introduces a multi-mode unified modeling approach, evaluates the operation capability, and proposes new concepts of autonomous soft-landing and propulsive-landing to expand the detection range.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Robotics

Contact Sequence Planning for Hexapod Robots in Sparse Foothold Environment Based on Monte-Carlo Tree

Peng Xu et al.

Summary: This letter proposes a novel coordinative planning method for hexapod robots, treating gait and foothold planning as a sequence optimization problem. By considering the environment's harshness as the leg's fault and using the Monte Carlo tree search algorithm, the method effectively improves the passability of the hexapod robot in challenging terrains with sparse footholds.

IEEE ROBOTICS AND AUTOMATION LETTERS (2022)

Add to Collection

Article Engineering, Mechanical

Mechanism design and workspace analysis of a hexapod robot

Huayang Li et al.

Summary: This paper proposes a novel hexapod robot with good stability and flexibility, capable of adapting to various complex terrains. The mechanical topology and leg mechanism of the robot are determined by considering multiple factors comprehensively. The correctness and feasibility of the theoretical analysis are verified through simulations and field experiments.

MECHANISM AND MACHINE THEORY (2022)

Add to Collection

Article Engineering, Mechanical

Dimensional Synthesis of the reconfigurable legged mobile lander with multi-mode and complex mechanism topology

Youcheng Han et al.

Summary: This study presents a systematic optimum dimension design strategy named MMSO, which simplifies the optimization of ReLML's complex mechanism topology. Four optimization models are established to meet the demands of landing and walking modes, resulting in the identification of global optimum dimensions for ReLML.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Staircase-climbing capability-based dimension design of a hexapod robot

Huayang Li et al.

Summary: This study investigates the dimension design of a hexapod robot based on staircase-climbing, analyzing the impact of leg and body dimensions on climbing capability, as well as solving interference issues between leg mechanisms and staircases.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a novel octopod platform with a reconfigurable trunk

Jianxu Wu et al.

Summary: A novel octopod platform with dual degree-of-freedom and reconfigurable trunk is proposed in this study to enhance the terrain mobility of the close-chain leg mechanism. The platform's walking strategy is adjusted through spatial close-chain trunk mechanism, and various locomotion modes are analyzed and optimized to improve obstacle-climbing capability. The study provides a new reference for the development of close-chain legged platforms.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Type synthesis of a class of novel 3-DOF single-loop parallel leg mechanisms for walking robots

Luquan Li et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Engineering, Mechanical

Novel method for preventing shin-collisions in six-legged robots by utilising a robot-terrain interference model

Liheng Mao et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Robotics

Learning quadrupedal locomotion over challenging terrain

Joonho Lee et al.

SCIENCE ROBOTICS (2020)

Add to Collection

Article Chemistry, Analytical

Structural Design and Crawling Pattern Generator of a Planar Quadruped Robot for High-Payload Locomotion

Ru Kang et al.

SENSORS (2020)

Add to Collection

Article Robotics

Multi-expert learning of adaptive legged locomotion

Chuanyu Yang et al.

SCIENCE ROBOTICS (2020)

Add to Collection

Article Engineering, Mechanical

Development and Analysis of a Closed-Chain Wheel-Leg Mobile Platform

Chaoran Wei et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2020)

Add to Collection

Article Computer Science, Information Systems

Minimizing the Energy Consumption for a Hexapod Robot Based on Optimal Force Distribution

Guanyu Wang et al.

IEEE ACCESS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Improving Kinematic Flexibility and Walking Performance of a Six-legged Robot by Rationally Designing Leg Morphology

Jie Chen et al.

JOURNAL OF BIONIC ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Characterization, validation, and stability analysis of maximized reachable workspace of radially symmetric hexapod machines

H. Rastgar et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Mechanical

Design and Analysis of a Sixteen-Legged Vehicle With Reconfigurable Close-Chain Leg Mechanisms

Jianxu Wu et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Engineering, Mechanical

Stability Margin of a Metamorphic Quadruped Robot With a Twisting Trunk

Chunsong Zhang et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Robotics

Design, development, and control of a tough electrohydraulic hexapod robot for subsea operations

I. Davliakos et al.

ADVANCED ROBOTICS (2018)

Add to Collection

Article Engineering, Mechanical

Kinematic analysis and multi-objective optimization of a 3-UPR parallel mechanism for a robotic leg

Matteo Russo et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Mechanical

Type synthesis of a 3-mixed-DOF protectable leg mechanism of a firefighting multi-legged robot based on GF set theory

Jinzhu Zhang et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Trot Gait with Twisting Trunk of a Metamorphic Quadruped Robot

Chunsong Zhang et al.

JOURNAL OF BIONIC ENGINEERING (2018)

Add to Collection

Article Robotics

Advances in real-world applications for legged robots

C. Dario Bellicoso et al.

JOURNAL OF FIELD ROBOTICS (2018)

Add to Collection

Article Robotics

Motion planning and implementation for the self-recovery of an overturned multi-legged robot

Saijin Peng et al.

ROBOTICA (2017)

Add to Collection

Article Automation & Control Systems

Design of the Hydraulically Actuated, Torque-Controlled Quadruped Robot HyQ2Max

Claudio Semini et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2017)

Add to Collection

Article Engineering, Industrial

Mechanism design of a biomimetic quadruped robot

Zhao Tang et al.

INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION (2017)

Add to Collection

Article Engineering, Multidisciplinary

A Parallel Actuated Pantograph Leg for High-speed Locomotion

Wei Guo et al.

JOURNAL OF BIONIC ENGINEERING (2017)

Add to Collection

Article Robotics

Design Principles for a Family of Direct-Drive Legged Robots

Gavin Kenneally et al.

IEEE ROBOTICS AND AUTOMATION LETTERS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Type Synthesis for Bionic Quadruped Walking Robots

Jun He et al.

JOURNAL OF BIONIC ENGINEERING (2015)

Add to Collection

Article Engineering, Mechanical

Comprehensive closed-form solution for the reachable workspace of 2-RPR planar parallel mechanisms

Mahdi Agheli et al.

MECHANISM AND MACHINE THEORY (2014)

Add to Collection

Article Robotics

Fault tolerance criteria and walking capability analysis of a novel parallel-parallel hexapod break walking robot

Yang Pan et al.

ROBOTICA (2014)

Add to Collection

Article Computer Science, Artificial Intelligence

Body Workspace of Quadruped Walking Robot and its Applicability in Legged Locomotion

Vo-Gia Loc et al.

JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (2012)

Add to Collection

Article Automation & Control Systems

Improving traversability of quadruped walking robots using body movement in 3D rough terrains

Vo-Gia Loc et al.

ROBOTICS AND AUTONOMOUS SYSTEMS (2011)

Add to Collection

Article Robotics

Analysis of typical locomotion of a symmetric hexapod robot

Z. -Y. Wang et al.

ROBOTICA (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.