4.8 Article

Interfacial Issues and Modification of Solid Electrolyte Interphase for Li Metal Anode in Liquid and Solid Electrolytes

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Ultrathin and High-Modulus LiBO2 Layer Highly Elevates the Interfacial Dynamics and Stability of Lithium Anode under Wide Temperature Range

Song Li et al.

Summary: Constructing an ultrathin LiBO2 layer on Li anode can effectively suppress dendrite growth at subambient temperature and side reactions at high temperature in lithium metal batteries, leading to improved cycling life and performance of the batteries.

SMALL (2022)

Article Chemistry, Physical

Tuning Interface Lithiophobicity for Lithium Metal Solid-State Batteries

Xinzi He et al.

Summary: By doping strontium into lithium anodes, the challenges of Li dendrite and high interface resistance in solid-state lithium batteries have been overcome. The novel bifunctional lithiophilic/lithiophobic interlayer strategy provides a new pathway for high-performance garnet solid-state lithium batteries.

ACS ENERGY LETTERS (2022)

Article Chemistry, Physical

Modification of lithium electrodeposition behavior by variation of electrode distance

Oh B. Chae et al.

Summary: This study presents a new observation on the effect of electrode separation distance on lithium deposition behavior. The distance between the working electrode and counter electrode is found to influence the morphology of lithium deposition and inhibit dendrite formation.

JOURNAL OF POWER SOURCES (2022)

Article Electrochemistry

Modification of solid electrolyte interphase on deposited lithium metal by large separation between the electrodes in ether-based electrolytes

Oh B. Chae et al.

Summary: This study investigates the influence of electrode separation on lithium deposition behavior and reveals that different solid electrolyte interphase (SEI) compositions are generated under different electrode separations.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2022)

Review Chemistry, Physical

Anode-Free Solid-State Lithium Batteries: A Review

Wen-Ze Huang et al.

Summary: Anode-free solid-state lithium batteries are considered as a promising choice for next-generation energy storage systems due to their improved energy density, enhanced safety, and extended cycle life. However, the inefficiency of lithium plating and stripping, caused by the absence of excess lithium inventory, leads to rapid capacity degradation. This review elaborates on the difficulties and challenges faced by anode-free solid-state lithium batteries and proposes various strategies to optimize performance, aiming to improve the cycle life of lithium batteries.

ADVANCED ENERGY MATERIALS (2022)

Review Chemistry, Physical

Interfaces in all solid state Li-metal batteries: A review on instabilities, stabilization strategies, and scalability

Partha Paul et al.

Summary: With advances in technology, batteries equipped with a lithium anode are crucial for achieving high energy densities. The main challenge in developing all solid-state batteries lies in the highly reactive interfaces between the anode, cathode, and solid-state electrolyte. This comprehensive review focuses on stabilizing the electrode and solid-state electrolyte interfaces, bridging the gap between fundamental research and technological relevance.

ENERGY STORAGE MATERIALS (2022)

Article Multidisciplinary Sciences

Lithium hexamethyldisilazide as electrolyte additive for efficient cycling of high-voltage non-aqueous lithium metal batteries

Danfeng Zhang et al.

Summary: Adding lithium hexamethyldisilazide as an electrolyte additive improves the cycling stability of high-voltage lithium metal batteries by preventing cathode degradation and suppressing side reactions with the electrolyte solution.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Physical

Distance-Dependent Solid Electrolyte Interphase Control by Electrochemical Pretreatment

Oh B. Chae et al.

Summary: A new method has been investigated to control the morphology and chemical composition of solid electrolyte interphase (SEI) on the Si anode through electrochemical pretreatment by varying the distance between electrodes. The results show that the SEI's chemical composition and structure depend on the electrode distance during electrochemical pretreatment. When the electrode distance is large (>= 2 mm), a LiF-dominant surface film with dispersed LiF nano-particles is generated, improving the electrochemical performance of the Si anode.

ACS ENERGY LETTERS (2022)

Article Nanoscience & Nanotechnology

Effect of Highly Periodic Au Nanopatterns on Dendrite Suppression in Lithium Metal Batteries

Woo-Bin Jung et al.

Summary: The study introduced a new strategy of using nanopatterned gold seed on a copper current collector for uniform lithium deposition, resulting in enhanced battery performance. Ex situ scanning electron microscopy images confirmed the effect of gold nanopatterns on lithium nucleation and growth.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

Stabilization effect of solid-electrolyte interphase by electrolyte engineering for advanced Li-ion batteries

His Muhammad Bintang et al.

Summary: The use of a Sn anode paired with a novel electrolyte composed of eutectic succinonitrile (SN) combined with fluoroethylene carbonate (FEC) has been demonstrated to improve the stability of the solid electrolyte interphase (SEI) and buffer large volume changes, leading to superior cycle performance of the Sn anode compared to conventional electrolytes. The synergistic effects of the novel electrolyte components result in a mechanically rigid SEI mainly composed of favorable inorganics, demonstrating potential for enhanced electrochemical performance of Sn anodes and other alloying-based anode materials.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Electrochemistry

A comparative study of increased lithium storage with low resistance at structural defects in amorphous titanium dioxide electrode

Oh B. Chae et al.

Summary: The study demonstrates that using amorphous titanium oxide can overcome the limitations of crystalline titanium oxide in terms of lithium storage capacity and diffusion resistance. The amorphous titanium oxide provides additional lithium storage sites and open lithium diffusion paths, leading to better performance compared to the crystalline form.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Multidisciplinary

Lithium Metal Electrode with Increased Air Stability and Robust Solid Electrolyte Interphase Realized by Silane Coupling Agent Modification

Yanyan Wang et al.

Summary: This study utilizes a silane coupling agent to improve the solid electrolyte interphase (SEI) layer of Li metal electrodes, enhancing their electrochemical performance and oxidation resistance. The silane coupling agent can bridge Li metal and the SEI layer through chemical bonding and physical intertwining effects, leading to excellent electrode performance.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Dual-salt-additive electrolyte enables high-voltage lithium metal full batteries capable of fast-charging ability

Xinyang Wang et al.

Summary: The study introduces an advanced carbonate-based electrolyte with dual-salt additives to improve the stability of lithium metal and Ni-rich cathode under high voltage or fast charge operations. The dual-salt additives establish robust and highly conductive solid electrolyte interphases, reducing electrode overpotential and enhancing capacity retention of the battery.

NANO ENERGY (2021)

Article Chemistry, Physical

Lithium Cyano Tris(2,2,2-trifluoroethyl) Borate as a Multifunctional Electrolyte Additive for High-Performance Lithium Metal Batteries

Oh B. Chae et al.

Summary: The newly synthesized LCTFEB as an electrolyte additive improves the performance of lithium metal batteries, showing significant enhancement in electrochemical performance of NCM523/Li cells and symmetric Li/Li cells upon its incorporation into the electrolyte. Multiple characterizations on lithium metal morphology and SEI suggest the formation of a thin LiF-rich SEI with low concentrations of B and N compounds, leading to improved electrochemical performance through the preferential reductive decomposition of LCTFEB.

ACS ENERGY LETTERS (2021)

Article Energy & Fuels

Pressure-tailored lithium deposition and dissolution in lithium metal batteries

Chengcheng Fang et al.

Summary: This study presents a high-density Li deposition technique achieved by controlling uniaxial stack pressure to improve the performance of lithium metal batteries, along with proposing a Li morphology testing protocol to maintain the ideal Li deposition morphology. The critical role of stack pressure on Li nucleation, growth, and dissolution processes is elucidated, highlighting the importance of precise control of Li deposition and dissolution.

NATURE ENERGY (2021)

Review Chemistry, Physical

Dendrites in Solid-State Batteries: Ion Transport Behavior, Advanced Characterization, and Interface Regulation

Zhenjiang Yu et al.

Summary: Solid-state electrolytes (SSEs) are gaining interest for high-energy Li-metal batteries, but safety concerns remain due to dendrite growth. Interfaces with solid lithium are crucial for determining battery performance, but direct characterization is challenging. Recent research focuses on understanding dendrite growth and providing solutions for functional interfaces to suppress dendrites.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

A Review of Existing and Emerging Methods for Lithium Detection and Characterization in Li-Ion and Li-Metal Batteries

Partha P. Paul et al.

Summary: This review discusses various approaches used to detect and characterize the formation of Li in batteries, each technique has its unique advantages and limitations towards solving part of the puzzle of battery degradation. Multimodal characterization holds promise for addressing concerns in the implementation of the next generation of batteries in the transportation sector.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Extraordinary dendrite-free Li deposition on highly uniform facet wrinkled Cu substrates in carbonate electrolytes

Ju Ye Kim et al.

Summary: The study demonstrates that using a novel Cu anode structure with sharp wrinkles and a [100] crystal facet in a carbonate-based electrolyte can achieve dendrite-free lithium deposition, leading to enhanced longterm cyclability of lithium metal batteries.

NANO ENERGY (2021)

Review Energy & Fuels

Current Trends in Nanoscale Interfacial Electrode Engineering for Sulfide-Based All-Solid-State Li-Ion Batteries

Mukarram Ali et al.

Summary: The all-solid-state Li-ion batteries (ASSLBs) have attracted attention for energy storage technologies in the past two decades. The sulfide-based solid electrolytes (SSEs) are considered the most promising electrolytes for practical ASSLBs due to their high ionic conductivity and potential for high energy density cells. However, SSEs face challenges such as low electrochemical stability and dendritic growth. This review focuses on nanoscale interfacial engineering for oxide-based cathode materials and Li-metal anodes, discussing recent advancements in complex interfacial coatings and lithiophilic seeding.

ENERGY TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Smart Construction of an Intimate Lithium | Garnet Interface for All-Solid-State Batteries by Tuning the Tension of Molten Lithium

Mingjie Du et al.

Summary: Garnet electrolytes show great promise in all-solid-state lithium batteries, but poor contact with Li-metal anodes remains a major challenge.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Stable Interface Chemistry and Multiple Ion Transport of Composite Electrolyte Contribute to Ultra-long Cycling Solid-State LiNi0.8Co0.1Mn0.1O2/Lithium Metal Batteries

Ke Yang et al.

Summary: The ceramic-polymer-liquid composite electrolyte enables solid-state NCM811/Li batteries to cycle 1500 times, exhibiting superior performance at a wide temperature range.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Chemistry, Physical

Energy Storage Materials for Solid-State Batteries: Design by Mechanochemistry

Roman Schlem et al.

Summary: This review discusses the physical and mechanochemical processes that influence the processing of solid-state batteries, with a focus on the influence of milling and dispersing procedures on the ionic transport properties. By combining theoretical backgrounds with a wide range of examples, a better understanding of critical parameters related to mechanical milling of solid electrolytes and solid-state battery components is provided.

ADVANCED ENERGY MATERIALS (2021)

Editorial Material Energy & Fuels

Li4Ti5O12 spinel anodes

Michael M. Thackeray et al.

Summary: Li4Ti5O12 spinel was originally studied as a cathode material for rechargeable lithium batteries, but later found success as an anode in the lithium-ion battery industry, offering safe, high-power cells with lower energy density compared to those with graphite/carbon anodes.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

An inorganic-rich SEI induced by LiNO3 additive for a stable lithium metal anode in carbonate electrolyte

Dongdong Liu et al.

Summary: The dissolution of LiNO3 in carbonate electrolytes can be enhanced by introducing pyridine as a new carrier solvent, which leads to improved reversibility of the Li metal anode due to the preferential reduction of LiNO3 and the formation of an inorganic-rich solid electrolyte interface (SEI).

CHEMICAL COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Strategies towards enabling lithium metal in batteries: interphases and electrodes

Birger Horstmann et al.

Summary: Despite the approaching performance limits of lithium-ion intercalation batteries, research is intensifying on next-generation battery technologies, with a focus on the use of lithium metal anode. However, the poor morphological stability and Coulombic efficiency of the lithium metal anode in liquid electrolytes present challenges for reversible cycling. Experimental and theoretical insights are being used to explore pathways for stable cycling of two-dimensional lithium metal and improvements in understanding lithium metal nucleation and deposition on the nanoscale. Recent advances in electrolytes and SEI design show potential for stable cycling and mitigation of morphological instabilities.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Graphitic Carbon Nitride (g-C3N4): An Interface Enabler for Solid-State Lithium Metal Batteries

Ying Huang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Enabling High-Voltage Lithium Metal Batteries by Manipulating Solvation Structure in Ester Electrolyte

Yulin Jie et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Multidisciplinary Sciences

The intrinsic behavior of lithium fluoride in solid electrolyte interphases on lithium

Mingfu He et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Article Chemistry, Multidisciplinary

In Situ Construction of An Ultra-Stable Conductive Composite Interface for High-Voltage All-Solid-State Lithium Metal Batteries

Kai Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Multidisciplinary

Structure-Controlled Li Metal Electrodes for Post-Li-Ion Batteries: Recent Progress and Perspectives

Dahee Jin et al.

ADVANCED MATERIALS INTERFACES (2020)

Review Nanoscience & Nanotechnology

From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries

Darren H. S. Tan et al.

NATURE NANOTECHNOLOGY (2020)

Article Nanoscience & Nanotechnology

LiFSI and LiDFBOP Dual-Salt Electrolyte Reinforces the Solid Electrolyte Interphase on a Lithium Metal Anode

Si Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Physical

Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte

Pengbo Zhai et al.

ADVANCED ENERGY MATERIALS (2020)

Article Physics, Multidisciplinary

Electroconvection in a Viscoelastic Electrolyte

Gaojin Li et al.

PHYSICAL REVIEW LETTERS (2019)

Article Chemistry, Multidisciplinary

Temperature-dependent Nucleation and Growth of Dendrite-Free Lithium Metal Anodes

Kang Yan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Editorial Material Multidisciplinary Sciences

How lithium dendrites form in liquid batteries

Jie Xiao

SCIENCE (2019)

Article Chemistry, Multidisciplinary

Lithium-Graphite Paste: An Interface Compatible Anode for Solid-State Batteries

Jian Duan et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Acid induced conversion towards a robust and lithiophilic interface for Li-Li7La3Zr2O12 solid-state batteries

Yadong Ruan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Physical

Generation and Evolution of the Solid Electrolyte Interphase of Lithium-Ion Batteries

Satu Kristiina Heiskanen et al.

JOULE (2019)

Review Materials Science, Multidisciplinary

Artificial Interphases for Highly Stable Lithium Metal Anode

Rui Xu et al.

MATTER (2019)

Article Chemistry, Multidisciplinary

Electrochemomechanics of lithium dendrite growth

Aniruddha Jana et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

One-pot solution coating of high quality LiF layer to stabilize Li metal anode

Jialiang Lang et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Interfacial Chemistry in Solid-State Batteries: Formation of Interphase and Its Consequences

Shaofei Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries

Chengwei Wang et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Highly Stable Lithium Metal Batteries Enabled by Regulating the Solvation of Lithium Ions in Nonaqueous Electrolytes

Xue-Qiang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes

Nian-Wu Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

Effect of electrolyte on the nanostructure of the solid electrolyte interphase (SEI) and performance of lithium metal anodes

Sunhyung Jurng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries

Bingbin Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Suppressing Li Dendrite Formation in Li2S-P2S5 Solid Electrolyte by LiI Incorporation

Fudong Han et al.

ADVANCED ENERGY MATERIALS (2018)

Article Energy & Fuels

Stable cycling of high-voltage lithium metal batteries in ether electrolytes

Shuhong Jiao et al.

NATURE ENERGY (2018)

Article Chemistry, Multidisciplinary

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Xiulin Fan et al.

Article Multidisciplinary Sciences

Stabilizing electrochemical interfaces in viscoelastic liquid electrolytes

Shuya Wei et al.

SCIENCE ADVANCES (2018)

Article Chemistry, Multidisciplinary

Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries

Chong Yan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Nanoscience & Nanotechnology

Grain Boundary Softening: A Potential Mechanism for Lithium Metal Penetration through Stiff Solid Electrolytes

Seungho Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Review Chemistry, Multidisciplinary

Before Li Ion Batteries

Martin Winter et al.

CHEMICAL REVIEWS (2018)

Article Multidisciplinary Sciences

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Xiulin Fan et al.

SCIENCE ADVANCES (2018)

Article Electrochemistry

Effect of Initial State of Lithium on the Propensity for Dendrite Formation: A Theoretical Study

Pallab Barai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Physical

Decomposition Reactions of Anode Solid Electrolyte Interphase (SEI) Components with LiPF6

Bharathy S. Parimalam et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Multidisciplinary Sciences

Strong texturing of lithium metal in batteries

Feifei Shi et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Article Chemistry, Multidisciplinary

Transient Behavior of the Metal Interface in Lithium Metal-Garnet Batteries

Kun (Kelvin) Fu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

Crystal Orientation Dependence of Precipitate Structure of Electrodeposited Li Metal on Cu Current Collectors

Kohei Ishikawa et al.

CRYSTAL GROWTH & DESIGN (2017)

Article Chemistry, Multidisciplinary

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Chemistry, Multidisciplinary

An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes

Nian-Wu Li et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Physical

Interface Stability in Solid-State Batteries

William D. Richards et al.

CHEMISTRY OF MATERIALS (2016)

Article Chemistry, Multidisciplinary

A Review of Solid Electrolyte Interphases on Lithium Metal Anode

Xin-Bing Cheng et al.

ADVANCED SCIENCE (2016)

Article Chemistry, Physical

A new finding on the role of LiNO3 in lithium-sulfur battery

Sheng S. Zhang

JOURNAL OF POWER SOURCES (2016)

Article Chemistry, Multidisciplinary

Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte

Wei Luo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Physical

High-Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating

Guangyuan Zheng et al.

ACS ENERGY LETTERS (2016)

Review Chemistry, Physical

A review of lithium and non-lithium based solid state batteries

Joo Gon Kim et al.

JOURNAL OF POWER SOURCES (2015)

Article Electrochemistry

The Effect of Interactions and Reduction Products of LiNO3, the Anti-Shuttle Agent, in Li-S Battery Systems

Ariel Rosenman et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode

Georg Bieker et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Article Multidisciplinary Sciences

High rate and stable cycling of lithium metal anode

Jiangfeng Qian et al.

NATURE COMMUNICATIONS (2015)

Article Multidisciplinary Sciences

The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth

Weiyang Li et al.

NATURE COMMUNICATIONS (2015)

Article Electrochemistry

Effect of Electrolyte Additives on Non-Nano-Si Negative Electrodes Prepared with Polyimide Binder

Satoshi Uchida et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Review Chemistry, Multidisciplinary

Lithium metal anodes for rechargeable batteries

Wu Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Lithium Ion Battery Graphite Solid Electrolyte Interphase Revealed by Microscopy and Spectroscopy

Mengyun Nie et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Article Chemistry, Multidisciplinary

Li10SnP2S12: An Affordable Lithium Superionic Conductor

Philipp Bron et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Electrochemistry

Performance Improvement of Nano-Sized Zinc Oxide Electrode by Embedding in Carbon Matrix for Lithium-Ion Batteries

Oh B. Chae et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Electrochemistry

Effects of Carbonate Solvents and Lithium Salts on Morphology and Coulombic Efficiency of Lithium Electrode

Fei Ding et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Chemistry, Physical

Cubic phases of garnet-type Li7La3Zr2O12: the role of hydration

G. Larraz et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Article Electrochemistry

Lithium transport within the solid electrolyte interphase

Peng Lu et al.

ELECTROCHEMISTRY COMMUNICATIONS (2011)

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

Article Chemistry, Physical

Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere

Hiromasa Muramatsu et al.

SOLID STATE IONICS (2011)

Article Thermodynamics

Thermodynamic of LiF dissolution in alkylcarbonates and some of their mixtures with water

Jennifer Jones et al.

FLUID PHASE EQUILIBRIA (2009)

Article Chemistry, Physical

Chemical bonding and lithium ion conductions in Li3N

Y. Kowada et al.

SOLID STATE IONICS (2009)

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Article Electrochemistry

The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Electrochemistry

Surface characterization of emulsified lithium powder electrode

ST Hong et al.

ELECTROCHIMICA ACTA (2004)

Article Electrochemistry

Failure modes of silicon powder negative electrode in lithium secondary batteries

JH Ryu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2004)