4.8 Article

Superior zero thermal expansion dual-phase alloy via boron-migration mediated solid-state reaction

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

A new strong pearlitic multi-principal element alloy to withstand wear at elevated temperatures

X. L. An et al.

Summary: The study focuses on revitalizing the pearlite structure in a newly developed multi-principal element alloy (MPEA) through a classic eutectoid reaction, resulting in a nanometre sized layered microstructure. This pearlitic structure significantly improves the strength, wear resistance, and high temperature stability of the alloy.

ACTA MATERIALIA (2022)

Article Materials Science, Multidisciplinary

Solving oxygen embrittlement of refractory high-entropy alloy via grain boundary engineering

Zhengqi Wang et al.

Summary: In this study, large plasticity and high strength were achieved in NbMoTaW RHEAs through grain boundary engineering and the addition of metalloid B or C. The room-temperature brittleness of as-cast NbMoTaW RHEA was found to be caused by grain boundary segregation of oxygen, which was alleviated by the added metalloids, leading to a change in fracture morphology.

MATERIALS TODAY (2022)

Article Multidisciplinary Sciences

Manufacture-friendly nanostructured metals stabilized by dual-phase honeycomb shell

Hai Wang et al.

Summary: Engineering applications of nanostructured metals are limited by their complex manufacturing technology and poor microstructural stability. Here the authors report a facile technology that enables a mass production of nanostructured Ti6Al4V5Cu alloys with high microstructural stability.

NATURE COMMUNICATIONS (2022)

Article Multidisciplinary Sciences

A sustainable ultra-high strength Fe18Mn3Ti maraging steel through controlled solute segregation and α-Mn nanoprecipitation

A. Kwiatkowski da Silva et al.

Summary: The authors propose a segregation-based strategy to produce a sustainable steel that achieves ultrahigh-strength without the use of critical elements. Their experimental results show that this steel outperforms most common commercial alloys.

NATURE COMMUNICATIONS (2022)

Article Materials Science, Multidisciplinary

Two-dimensional zero thermal expansion in low-cost MnxFe5-xSi3 alloys via integrating crystallographic texture and magneto-volume effect

Chengyi Yu et al.

Summary: In this work, a route to achieving two-dimensional zero thermal expansion (ZTE) behavior in volumetric positive thermal expansion alloys is reported. The ZTE behavior is strongly coupled with fiber crystallographic texture and magnetic moment at the crystallographic 6g site. This approach can be used to extend the scope of ZTE/NTE species in other magnetic or ferroelectric materials.

SCIENCE CHINA-MATERIALS (2022)

Article Chemistry, Multidisciplinary

A Seawater-Corrosion-Resistant and Isotropic Zero Thermal Expansion (Zr,Ta)(Fe,Co)2 Alloy

Wenjie Li et al.

Summary: A high-performance alloy, Zr0.8Ta0.2Fe1.7Co0.3, with isotropic zero thermal expansion (ZTE) behavior, high corrosion resistance, and excellent thermal and structural stability, is reported. The multiple stabilities are attributed to the alloy's cubic symmetry, controllable magnetic order, and the formation of a passive film with Ta and Zr chemical modifications. The alloy has the potential for robust applications in marine services and other fields.

ADVANCED MATERIALS (2022)

Article Multidisciplinary Sciences

A mechanically strong and ductile soft magnet with extremely low coercivity

Liuliu Han et al.

Summary: Soft magnetic materials are essential for electrical applications and sustainable energy supply, as they can respond to changes in applied magnetic field with low energy loss. However, designing soft magnetic alloys with both high strength and low coercivity is a fundamental challenge. In this study, a Fe-Co-Ni-Ta-Al multicomponent alloy was developed, which contained ferromagnetic matrix and paramagnetic coherent nanoparticles. These nanoparticles impede dislocation motion, enhancing the strength and ductility of the alloy, while maintaining its soft magnetic properties.

NATURE (2022)

Article Materials Science, Multidisciplinary

Tailoring thermal expansion of shape memory alloys through designed reorientation deformation

Qiao Li et al.

Summary: This study explores the manipulation of macroscopic linear thermal expansion in shape memory alloys through microstructure engineering. Through a combination of modeling and experimentation, the research focuses on designing and tuning the coefficient of thermal expansion of polycrystalline martensitic SMAs based on reorientation deformation. The results show intrinsic lattice-level thermal expansion properties in martensite polycrystals, with the overall linear CTE being influenced by both intrinsic lattice properties and extrinsic reorientation-deformation textures. Additionally, ultralow in-plane CTE values were achieved through designed cross-rolling on martensitic NiTi sheets, demonstrating potential applications in various industries.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

In-plane low thermal expansion of NiTi via controlled cross rolling

Qiao Li et al.

Summary: Controlled cross rolling (CroR) can achieve in-plane low coefficients of thermal expansion (CTEs) of polycrystalline NiTi sheets, significantly reducing CTEs close to zero over a wide temperature range. The physical mechanism behind the in-plane low TE is explored through in situ neutron diffraction and a theoretical model, offering a new pathway for obtaining shape memory alloys (SMAs) with low thermal expansion properties.

ACTA MATERIALIA (2021)

Article Chemistry, Physical

Large negative thermal expansion promoted by microstructure in hexagonal Fe1-xCoxS

X. L. Wang et al.

Summary: This study reports the negative thermal expansion behavior in hexagonal Fe1-xCoxS alloys and suggests that the NTE of alloys with anisotropic lattice thermal expansion can be effectively adjusted by controlling the microstructure.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Multidisciplinary

A Distinct Spin Structure and Giant Baromagnetic Effect in MnNiGe Compounds with Fe-Doping

Feiran Shen et al.

Summary: The spin structure of a magnetic system is influenced by various exchange couplings, with pressure-driven changes in interatomic distance leading to the evolution of a new spin structure CyS-AFM(b). Under pressure higher than 4 kbar, abnormal changes in Mn(Fe)-Mn(Fe) distances can transform CyS-AFM(b) into a conical spiral ferromagnetic configuration.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Materials Science, Multidisciplinary

Design of negative/nearly zero thermal expansion behavior over a wide temperature range by multi-phase composite

Xiuliang Yuan et al.

Summary: Some magnetic metallic compounds exhibit negative thermal expansion (NTE) or nearly zero thermal expansion (NZTE) behaviors, but the limited temperature range poses a challenge for applications. A new method of designing NTE/NZTE multi-phase composite materials has been proposed to broaden the temperature range, showing promise for various applications.

MATERIALS & DESIGN (2021)

Article Nanoscience & Nanotechnology

ZrW2O8/ZrO2 Composites with Low/Near-Zero Coefficients of Thermal Expansion Fabricated at Ultralow Temperature: An Integration of Hydrothermal Assembly and a Cold Sintering Process

Cheng Yang et al.

Summary: This study successfully solves the bottleneck issues of ZrW2O8/ZrO2 composites by integrating hydrothermal assembly with a cold sintering process, and develops a promising prospect for the fabrication of a broader range of metastable functional materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Physics, Multidisciplinary

Ultrawide Temperature Range Super-Invar Behavior of R2(Fe,Co)17 Materials (R = Rare Earth)

Yili Cao et al.

Summary: By adjusting the Fe-Co content, researchers have optimized the thermal expansion behavior in a family of R-2(Fe, Co)(17) materials, achieving a record-wide SIV range with good cyclic stability. This breakthrough paves the way for exploiting thermal-expansion-control engineering and related functional materials.

PHYSICAL REVIEW LETTERS (2021)

Article Multidisciplinary Sciences

Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys

Peijian Shi et al.

Summary: The study demonstrates a directionally solidified eutectic high-entropy alloy with a hierarchically organized herringbone structure that reconciles crack tolerance and high elongation. The self-buffering herringbone material achieves an ultrahigh uniform tensile elongation while maintaining strength.

SCIENCE (2021)

Article Multidisciplinary Sciences

Gradient cell-structured high-entropy alloy with exceptional strength and ductility

Qingsong Pan et al.

Summary: By introducing gradient nanoscaled dislocation cell structures in stable single-phase HEAs, enhanced strength can be achieved without apparent loss of ductility. The gradient structure induces the formation of high-density tiny stacking faults and twins, contributing to improved plasticity, increased strength, and work hardening.

SCIENCE (2021)

Article Multidisciplinary Sciences

Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite

Chengyi Yu et al.

Summary: Zero thermal expansion (ZTE) alloys have unique dimensional stability but suffer from inherent brittleness and sensitivity to composition. In this study, a dual-phase alloy with axial zero expansion and promising mechanical properties was successfully produced using a one-step eutectic reaction approach.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

A dual-phase alloy with ultrahigh strength-ductility synergy over a wide temperature range

Raymond Kwesi Nutor et al.

Summary: High-entropy alloys (HEAs) offer promising property combinations and can maintain excellent strength-ductility synergy over a wide temperature range by utilizing multiple deformation mechanisms to enhance material performance.

SCIENCE ADVANCES (2021)

Article Multidisciplinary Sciences

Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels

Ran Ding et al.

SCIENCE ADVANCES (2020)

Article Materials Science, Multidisciplinary

High performance and low thermal expansion in Er-Fe-V-Mo dual-phase alloys

Kun Lin et al.

ACTA MATERIALIA (2020)

Article Chemistry, Inorganic & Nuclear

Controllable thermal expansion and magnetic structure in Er2(Fe,Co)14B intermetallic compounds

Yongqiang Qiao et al.

INORGANIC CHEMISTRY FRONTIERS (2019)

Article Chemistry, Multidisciplinary

Colossal Negative Thermal Expansion in Electron-Doped PbVO3 Perovskites

Hajime Yamamoto et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

Zero Thermal Expansion in Magnetic and Metallic Tb(Co,Fe)(2) Intermetallic Compounds

Yuzhu Song et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Materials Science, Multidisciplinary

Realization of zero thermal expansion in La(Fe, Si)(13)-based system with high mechanical stability

Jun Liu et al.

MATERIALS & DESIGN (2018)

Article Materials Science, Multidisciplinary

Good comprehensive performance of Laves phase Hf1-xTaxFe2 as negative thermal expansion materials

L. F. Li et al.

ACTA MATERIALIA (2018)

Article Chemistry, Multidisciplinary

Zero Thermal Expansion Achieved by an Electrolytic Hydriding Method in La(Fe, Si)13 Compounds

Shaopeng Li et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Multidisciplinary Sciences

Colossal negative thermal expansion in reduced layered ruthenate

Koshi Takenaka et al.

NATURE COMMUNICATIONS (2017)

Article Materials Science, Multidisciplinary

Tailored thermal expansion alloys

J. A. Monroe et al.

ACTA MATERIALIA (2016)

Article Chemistry, Multidisciplinary

Zero thermal expansion with high Curie temperature in Ho2Fe16Cr alloy

Shovan Dan et al.

RSC ADVANCES (2016)

Article Chemistry, Multidisciplinary

Giant Negative Thermal Expansion in Bonded MnCoGe-Based Compounds with Ni2In-Type Hexagonal Structure

Ying-Ying Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Multidisciplinary Sciences

Brittle intermetallic compound makes ultrastrong low-density steel with large ductility

Sang-Heon Kim et al.

NATURE (2015)

Article Chemistry, Multidisciplinary

Giant Negative Thermal Expansion in NaZn13-Type La(Fe, Si, Co)13 Compounds

Rongjin Huang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Chemistry, Multidisciplinary

Adjustable Zero Thermal Expansion in Antiperovskite Manganese Nitride

Xiaoyan Song et al.

ADVANCED MATERIALS (2011)

Article Multidisciplinary Sciences

Inverse barocaloric effect in the giant magnetocaloric La-Fe-Si-Co compound

Lluis Manosa et al.

NATURE COMMUNICATIONS (2011)

Article Multidisciplinary Sciences

Colossal negative thermal expansion in BiNiO3 induced by intermetallic charge transfer

Masaki Azuma et al.

NATURE COMMUNICATIONS (2011)

Article Multidisciplinary Sciences

Colossal positive and negative thermal expansion in the framework material Ag3[Co(CN)6]

Andrew L. Goodwin et al.

SCIENCE (2008)

Article Multidisciplinary Sciences

Zero thermal expansion in YbGaGe due to an electronic valence transition

JR Salvador et al.

NATURE (2003)