Related references
Note: Only part of the references are listed.Effect of stress anisotropy on deformation and particle breakage of silica sand at high-pressure compression tests
Tao Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Single-particle crushing behaviour of carbonate sands studied by X-ray microtomography and a combined finite-discrete element method
Bo Zhou et al.
ACTA GEOTECHNICA (2022)
Transparent characterization and quantitative analysis of broken gangue's 3D fabric under the bearing compression
Junmeng Li et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)
Particle breakage and shape analysis of calcareous sand under consolidated-undrained triaxial shear
Jianhua Shen et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2022)
Particle breakage of granular soils: changing critical state line and constitutive modelling
Chen-Xi Tong et al.
ACTA GEOTECHNICA (2022)
Experimental study on the mechanical behaviors and particle breakage characteristics of calcareous sand from South China Sea under repeated one-dimensional impacts
Haoran OuYang et al.
ACTA GEOTECHNICA (2022)
Effect of the intermediate principal stress on the mechanical behaviour of breakable granular materials using realistic particle models
Chuanfeng Fang et al.
ACTA GEOTECHNICA (2022)
Evolution of particle morphology and mode of fracture during the oedometric compression of sand
Dawa Seo et al.
GEOTECHNIQUE (2021)
Effects of particle size distribution and lithology on the resistance to breakage of ballast materials
Andre Fardin Rosa et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
An investigation of the breakage behaviour of a pre-crushed carbonate sand under shear using X-ray micro-tomography
Zhuang Cheng et al.
ENGINEERING GEOLOGY (2021)
Effect of Grain Crushing on the Hydraulic Conductivity of Tailings Sand
Shubjot Singh et al.
JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2021)
The detailed particle breakage around the pile in coral sand
Yu Peng et al.
ACTA GEOTECHNICA (2021)
DEM study on the microscale and macroscale shear behaviours of granular materials with breakable and irregularly shaped particles
Chuanfeng Fang et al.
COMPUTERS AND GEOTECHNICS (2021)
Effect of particle characteristics on the evolution of particle size, particle morphology, and fabric of sands loaded under uniaxial compression
Eshan Ganju et al.
ACTA GEOTECHNICA (2021)
Investigation of particle breakage under one-dimensional compression of sand using X-ray microtomography
Budi Zhao et al.
CANADIAN GEOTECHNICAL JOURNAL (2020)
Evaluation of variability characteristics of mechanical parameters of artificially frozen clay in deep alluvium
Tao Wang et al.
COLD REGIONS SCIENCE AND TECHNOLOGY (2020)
Fractal breakage of porous carbonate sand particles: Microstructures and mechanisms
H. Y. Li et al.
POWDER TECHNOLOGY (2020)
Discrete element modeling of particle breakage considering different fragment replacement modes
Wei Zhou et al.
POWDER TECHNOLOGY (2020)
Effects of particle sizes on compressive deformation and particle breakage of gangue used for coal mine goaf backfill
Meng Li et al.
POWDER TECHNOLOGY (2020)
Adapting a breakage model to discrete elements using polyhedral particles
Luis Marcelo Tavares et al.
POWDER TECHNOLOGY (2020)
Particle breakage of uniformly graded carbonate sands in dry/wet condition subjected to compression/shear tests
Chen-Xi Tong et al.
ACTA GEOTECHNICA (2020)
Crushing and Flooding Effects on One-Dimensional Time-Dependent Behaviors of a Granular Soil
Wen-Bo Chen et al.
INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)
DEM exploration of the effect of particle shape on particle breakage in granular assemblies
Tao Zhang et al.
COMPUTERS AND GEOTECHNICS (2020)
X-ray micro-computed tomography (μ-CT) for 3D characterization of particle kinematics representing water-induced loess micro-fabric collapse
B. Yu et al.
ENGINEERING GEOLOGY (2020)
Degradation of railway ballast under impact loading considering the morphological properties of aggregate
Mehdi Koohmishi et al.
TRANSPORTATION GEOTECHNICS (2020)
A peridynamic investigation on crushing of sand particles
F. Zhu et al.
GEOTECHNIQUE (2019)
Effect of particle morphology and contacts on particle breakage in a granular assembly studied using X-ray tomography
Zeynep Karatza et al.
GRANULAR MATTER (2019)
Particle breakage and energy dissipation of carbonate sands under quasi-static and dynamic compression
Yang Xiao et al.
ACTA GEOTECHNICA (2019)
Exploring the effect of 3D grain shape on the packing and mechanical behaviour of sands
H. Yang et al.
GEOTECHNIQUE LETTERS (2019)
Fractal crushing of carbonate and quartz sands along the specimen height under impact loading
Yang Xiao et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Numerical modeling of pile penetration in silica sands considering the effect of grain breakage
Yin-Fu Jin et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2018)
Evolution of deformation and breakage in sand studied using X-ray tomography
Z. Karatza et al.
GEOTECHNIQUE (2018)
Post-breakage changes in particle properties using synchrotron tomography
Tabassom Afshar et al.
POWDER TECHNOLOGY (2018)
Particle shape factors and fractal dimension after large shear strains in carbonate sand
X. Zhang et al.
GEOTECHNIQUE LETTERS (2018)
Quantification of bulk form and angularity of particle with correlation of shear strength and packing density in sands
Hyoung Suk Suh et al.
ENGINEERING GEOLOGY (2017)
Particle breakage and the critical state of sands
F. W. Yu
GEOTECHNIQUE (2017)
DEM modeling of shear bands in crushable and irregularly shaped granular materials
Wei Zhou et al.
GRANULAR MATTER (2017)
Multiple contact compression tests on sand particles
M. C. Todisco et al.
SOILS AND FOUNDATIONS (2017)
DEM modeling of shear bands in crushable and irregularly shaped granular materials
Wei Zhou et al.
GRANULAR MATTER (2017)
DEM study on the effect of particle breakage on the macro- and micro-behavior of rockfill sheared along different stress paths
Ming Xu et al.
COMPUTERS AND GEOTECHNICS (2017)
Undrained monotonic and cyclic shear response and particle crushing of silica sand at low and high pressures
Masayuki Hyodo et al.
CANADIAN GEOTECHNICAL JOURNAL (2017)
Stress-dilatancy of Zipingpu gravel in triaxial compression tests
JingMao Liu et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2016)
DEM Modeling of Particle Breakage in Silica Sands under One-Dimensional Compression
Danda Shi et al.
ACTA MECHANICA SOLIDA SINICA (2016)
Frac sand crushing characteristics and morphology changes under high compressive stress and implications for sand pack permeability
Wenbo Zheng et al.
CANADIAN GEOTECHNICAL JOURNAL (2016)
The fractal micro mechanics of normal compression
John P. de Bono et al.
COMPUTERS AND GEOTECHNICS (2016)
Particle breakage criteria in discrete-element modelling
J. de Bono et al.
GEOTECHNIQUE (2016)
DEM analysis of the size effects on the behavior of crushable granular materials
Wei Zhou et al.
GRANULAR MATTER (2016)
Approach to the Weibull modulus based on fractal fragmentation of particles
Yongfu Xu et al.
POWDER TECHNOLOGY (2016)
3D quantitative shape analysis on form, roundness, and compactness with μCT
Budi Zhao et al.
POWDER TECHNOLOGY (2016)
DEM analysis of the size effects on the behavior of crushable granular materials
Wei Zhou et al.
GRANULAR MATTER (2016)
Stress relaxation behavior in Virginia Beach sand
Poul V. Lade et al.
CANADIAN GEOTECHNICAL JOURNAL (2015)
An investigation of single sand particle fracture using X-ray micro-tomography
B. Zhao et al.
GEOTECHNIQUE (2015)
A fractal model of contact force distribution and the unified coordination distribution for crushable granular materials under confined compression
Y. Yang et al.
POWDER TECHNOLOGY (2015)
Compressibility dependence on grain size distribution and relative density in sands
Sun YiFei et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2015)
Strain localisation and grain breakage in sand under shearing at high mean stress: insights from in situ X-ray tomography
R. Alikarami et al.
ACTA GEOTECHNICA (2015)
3D evolution of sand fracture under 1D compression
M. B. Cil et al.
GEOTECHNIQUE (2014)
An elastoplastic constitutive model for rockfills incorporating energy dissipation of nonlinear friction and particle breakage
Mengcheng Liu et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2014)
On the micro mechanics of one-dimensional normal compression
G. R. McDowell et al.
GEOTECHNIQUE (2013)
Breakage and ultimate states for a carbonate sand
G. Miao et al.
GEOTECHNIQUE (2013)
The inter-particle coefficient of friction at the contacts of Leighton Buzzard sand quartz minerals
Kostas Senetakis et al.
SOILS AND FOUNDATIONS (2013)
Mapping deeply-buried geothermal faults using microtremor array analysis
Peifen Xu et al.
GEOPHYSICAL JOURNAL INTERNATIONAL (2012)
Three dimensional fabric evolution of sheared sand
Alsidqi Hasan et al.
GRANULAR MATTER (2012)
Non-invasive characterization of particle morphology of natural sands
J. Fonseca et al.
SOILS AND FOUNDATIONS (2012)
Displacement in sand under triaxial compression by tracking soil particles on X-ray CT data
Yoichi Watanabe et al.
SOILS AND FOUNDATIONS (2012)
On the compression behaviour of reconstituted soils
B. Shipton et al.
SOILS AND FOUNDATIONS (2012)
Changes to particle characteristics associated with the compression of sands
F. N. Altuhafi et al.
GEOTECHNIQUE (2011)
THE INFLUENCE OF PARTICLE BREAKAGE ON THE LOCATION OF THE CRITICAL STATE LINE OF SANDS
V. Bandini et al.
SOILS AND FOUNDATIONS (2011)
Multiscale Force Networks in Highly Polydisperse Granular Media
C. Voivret et al.
PHYSICAL REVIEW LETTERS (2009)
Particle breakage during shearing of a carbonate sand
MR Coop et al.
GEOTECHNIQUE (2004)
One-dimensional compression behaviour of uniformly graded sand related to single particle crushing strength
Y Nakata et al.
SOILS AND FOUNDATIONS (2001)
Microscopic particle crushing of sand subjected to high pressure one-dimensional compression
Y Nakata et al.
SOILS AND FOUNDATIONS (2001)
An elastoplastic model for granular materials taking into account grain breakage
A Daouadji et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2001)