☆ 4.7 Article

Failure behaviors of granitic rocks induced by point/local loads under biaxial compression stress state

ACTA GEOTECHNICA (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Geological

Fatigue Failure Characteristics of Sandstone Under Different Confining Pressures

Roohollah Shirani Faradonbeh et al.

Summary: In this study, the fatigue behavior of Gosford sandstone under different stress and confinement levels was comprehensively evaluated. The results showed that the fatigue threshold stress, post-peak instability, and strength weakening/hardening were significantly affected by the applied stress and confinement levels. Furthermore, an empirical model based on the classification and regression tree algorithm was proposed to estimate the peak strength variation of the sandstone.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

The Dynamic Mechanical Properties of a Hard Rock Under True Triaxial Damage-Controlled Dynamic Cyclic Loading with Different Loading Rates: A Case Study

Yongqiang Zhou et al.

Summary: A dynamic constitutive model for rock materials suitable for dynamic cyclic loading was established, and numerical tests were conducted on a hard rock under true triaxial dynamic cyclic loading with different loading rates to study the dynamic deformation and mechanical properties.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Experimental investigation and theoretical analysis of indentations on cuboid hard rock using a conical pick under uniaxial lateral stress

Shaofeng Wang et al.

Summary: This paper investigates the influence of stress conditions on hard rock cuttability and proposes a theoretical model to analyze the peak cutting force (PCF) and associated factors. Experimental results and regression analyses show that rock cuttability decreases and then increases with the increase of uniaxial lateral stresses. The theoretical model, based on elastic fracture mechanics theory, accurately predicts the PCF. Finally, rock fragmentation using conical picks is successfully applied in the field mining stope to improve ore-rock cuttability by inducing high geostresses.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2022)

Add to Collection

Article Engineering, Geological

Assessment of rockburst risk using multivariate adaptive regression splines and deep forest model

Deping Guo et al.

Summary: In this study, a multivariate adaptive regression splines (MARS) model and a novel deep forest algorithm were used to predict and classify rockburst intensity with 344 worldwide rockburst cases. The t-distributed stochastic neighbor embedding method (t-SNE) was utilized for visualization and dimensionality reduction, and the Gaussian mixture model was employed to determine rockburst intensity. The study showed that the proposed models have the capability to assess and forecast rockburst risk, with the most important features being sigma(theta) and sigma(c).

ACTA GEOTECHNICA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Energy Dissipation and Damage Evolution Characteristics of Shale under Triaxial Cyclic Loading and Unloading

Ziyun Li et al.

Summary: This study investigates the energy dissipation and damage evolution characteristics of shale under triaxial cyclic loading and unloading conditions. The results show that the peak strength and peak strain of shale increase with the increase in confining pressures, while the plastic strain of rock under cyclic loading increases rapidly first, then develops steadily, and finally increases sharply with the increase in axial strain. The energy dissipation ratio-strain curve presents a spoon-shaped evolution feature. Based on the evolution of dissipated energy, a theoretical equation of shale stress-strain evolution was established.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Quantitative Investigation of Tomographic Effects in Abnormal Regions of Complex Structures

Longjun Dong et al.

Summary: Detecting abnormal regions in complex structures in underground space engineering is a challenging task. By utilizing an improved 3D tomography method and combining passive acoustic emission acquisition with active ultrasonic measurements, it is possible to accurately and quantitatively identify and image abnormal regions, thereby improving detection reliability.

ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Empty region identification method and experimental verification for the two-dimensional complex structure

Longjun Dong et al.

Summary: Empty region detection is widely used in geotechnical engineering, and this paper proposes a new method using an improved search algorithm and matching method to identify empty regions. The effectiveness and reliability of the method are verified through experiments.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanical and Acoustic Emission (AE) Characteristics of Rocks under Biaxial Confinements

Kun Du et al.

Summary: This study investigates the mechanical characteristics and acoustic emission properties of granite, marble, and sandstone under biaxial compression tests. It shows that under biaxial confinement, the elastic moduli decrease, plasticity increases, and the biaxial compressive strength of rock initially increases then decreases with the increase of the intermediate principal stress. The study also found that the behavior of rocks under biaxial confinement is influenced by both the sigma(1) and sigma(2) stresses, and the failure modes of different rock types differ under such conditions.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Geological

Experimental Investigation of Cuttability Improvement for Hard Rock Fragmentation Using Conical Cutter

Shaofeng Wang et al.

Summary: The cuttability of rocks is influenced by stress conditions and preexisting flaws, with cuttability increasing with stress in one direction decreasing under biaxial confining stresses, while showing a decreasing trend followed by an initial increase under uniaxial confining stresses. Prefractures and boreholes can further improve rock cuttability, providing useful insights for non-explosive mechanized mining in hard rock environments.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Analyses and predictions of rock cuttabilities under different confining stresses and rock properties based on rock indentation tests by conical pick

Shao-feng Wang et al.

Summary: The study investigated the relationship between rock cuttability and confining stress conditions, as well as rock strength, using various models. Results showed that the cuttability of rock varied with confining stress and was negatively correlated with rock strength parameters.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Add to Collection

Article Engineering, Mechanical

Computed tomography analysis on cyclic fatigue and damage properties of rock salt under gas pressure

Huihua Peng et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Engineering, Geological

Failure properties of cubic granite, marble, and sandstone specimens under true triaxial stress

Kun Du et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Engineering, Geological

Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests

Kun Du et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Experimental investigations on mechanical performance of rocks under fatigue loads and biaxial confinements

Kun Du et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Non-explosive mining and waste utilization for achieving green mining in underground hard rock mine in China

Shao-feng Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Add to Collection

Article Engineering, Geological

Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock

Shaofeng Wang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Article Engineering, Geological

Experimental and numerical investigation on the tensile fatigue properties of rocks using the cyclic flattened Brazilian disc method

Yi Liu et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Experimental investigation of hard rock fragmentation using a conical pick on true triaxial test apparatus

Shaofeng Wang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Automated valve fault detection based on acoustic emission parameters and support vector machine

Salah M. Ali et al.

ALEXANDRIA ENGINEERING JOURNAL (2018)

Add to Collection

Article Instruments & Instrumentation

Cyclic flattened Brazilian disc tests for measuring the tensile fatigue properties of brittle rocks

Yi Liu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2017)

Add to Collection

Article Engineering, Geological

Detection of Cracking Levels in Brittle Rocks by Parametric Analysis of the Acoustic Emission Signals

Zabihallah Moradian et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Add to Collection

Article Engineering, Geological

Experimental Study of Slabbing and Rockburst Induced by True-Triaxial Unloading and Local Dynamic Disturbance

Kun Du et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Add to Collection

Article Engineering, Geological

Effects of cyclic loading on the mechanical properties of a granite

A. Momeni et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Add to Collection

Article Construction & Building Technology

Investigation of different fracture modes in cement-based materials by acoustic emission

D. G. Aggelis et al.

CEMENT AND CONCRETE RESEARCH (2013)

Add to Collection

Article Engineering, Geological

Experimental investigation of the mechanical properties of rock salt under triaxial cyclic loading

Lin-jian Ma et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Effect of plate wave dispersion on the acoustic emission parameters in metals

D. G. Aggelis et al.

COMPUTERS & STRUCTURES (2012)

Add to Collection

Article Mechanics

Classification of cracking mode in concrete by acoustic emission parameters

Dimitrios G. Aggelis

MECHANICS RESEARCH COMMUNICATIONS (2011)

Add to Collection

Article Construction & Building Technology

Crack classification in concrete based on acoustic emission

Kentaro Ohno et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Add to Collection

Article Construction & Building Technology

Acoustic emission behavior of steel fibre reinforced concrete under bending

D. Soulioti et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Engineering, Geological

Fatigue and dynamic energy behaviour of rock subjected to cyclical loading

Manoj N. Bagde et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

Add to Collection

Article Engineering, Geological

Waveform effect on fatigue properties of intact sandstone in uniaxial cyclical loading

MN Bagde et al.

ROCK MECHANICS AND ROCK ENGINEERING (2005)

Add to Collection

Article Engineering, Geological

Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading

MN Bagde et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.