☆ 4.2 Article

Unsteady temperature distribution in a cylinder made of functionally graded materials under circumferentially-varying convective heat transfer boundary conditions

ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Article Mathematics, Applied

Analytical solution for temperature distribution in functionally graded cylindrical shells under convective cooling

Amin Emamian et al.

Summary: An analytical solution is obtained for the temperature distribution in a cylindrical shell made of functionally graded material, with particular emphasis on the dominant role of convective cooling. The obtained solution is validated using numerical data and tested for practical problems with different boundary conditions. Parametric studies reveal that boundary conditions play a dominant role in the cooling rate, while the material constant has no significant effect on the temperature distribution. This study can contribute to the improvement of design and production processes for cylindrical shells made of functionally graded material.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2023)

Add to Collection

Article Mechanics

Effect of phase lags of moisture-heat flow on the hygrothermoelastic field of hollow cylinders with convective surfaces

Yi Peng et al.

Summary: In this article, a hygrothermal coupling model is established for convective surfaces, taking into account the Dufour effect and Soret effect. The model is based on the phase delay of heat and moisture fluxes, and the effects of different relaxation times and moist-heat coupling on the temperature, moisture, and stress are analyzed. The results show that the temperature and moisture distributions, as well as the hygrothermal stress fields, exhibit different behaviors depending on the coefficient of the Robin condition.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2023)

Add to Collection

Article Mathematics, Applied

Size-dependent nonlinear vibration analysis of cracked graphene-platelets-reinforced-composites (GPLRC) plate under parametric excitation

Saeedeh Qaderi et al.

Summary: This study investigates the response of size-dependent randomly distributed graphene-platelet-reinforced composite (GPLRC) plates under periodic parametric excitation. The results show that dispersing graphene platelets as reinforcement material in the plate layer can improve the structural behavior and decrease the amplitude response of the system with the presence of a crack, compared to a similar system without reinforcement and crack.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2023)

Add to Collection

Article Thermodynamics

Performance analysis and optimization of combined heat and power system based on PEM fuel cell and ? type Stirling engine

Mahmood Mehregan et al.

Summary: A new combined heat and power (CHP) system is proposed, which combines a proton exchange membrane (PEM) fuel cell and a beta type Stirling engine. Two thermodynamic models are used to analyze the performance of the system and its impact on energy, environment, and economic factors. The optimization results show that the recommended engine speed, fuel cell temperature, and current density are 3000 rpm, 94.5 degrees C, and 0.67 A cm-2, respectively. Additionally, if the goal is to maximize CHP efficiency and reduce CO2 emissions, starting the system with slightly lower engine speed, lower temperature, and higher current density is recommended.

ENERGY CONVERSION AND MANAGEMENT (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Vibration analysis of polymer composite plates reinforced with graphene platelets resting on two-parameter viscoelastic foundation

Saeedeh Qaderi et al.

Summary: In this paper, the vibration behavior of a composite plate reinforced with graphene platelets on a viscoelastic foundation in a thermal environment is examined using a higher-order shear deformation theory. The material properties of the composite plate reinforced with graphene platelets are determined using the Halpin-Tsai model. The Euler-Lagrange equations of the composite plate are obtained using Hamilton's principle and Navier's method is used to analyze and solve the problem. The effects of various parameters on the vibrational reaction of the structure, such as geometry, graphene platelet weight fraction, temperature changes, and viscoelastic foundation, are analyzed.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Thermodynamics

Numerical simulation of the electroosmotic flow of the Carreau-Yasuda model in the rectangular microchannel

Saeed Ghorbani et al.

Summary: This paper investigates the numerical simulation of electroosmotic flow of the Carreau-Yasuda model in a rectangular microchannel. The study explores the effects of various parameters on the velocity field and temperature distribution, showing that increasing parameters such as the Weissenberg number, electrokinetic diameter, and exponential power reduces the maximum velocity field in the microchannel. This study is reported for the first time and contributes to the understanding of non-Newtonian fluid behavior in microchannels.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Add to Collection

Article Mechanics

Drops with circular stagnation lines: combined effects of viscoelastic and inertial forces on drop shape

A. Emamian et al.

Summary: The research investigates the motion and deformation of viscoelastic drops in a low inertia regime. It confirms the reliability of the analytical solution through experiments and identifies the appearance of elongational dominated flows and additional circular stagnation lines with increasing drop size.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2022)

Add to Collection

Article Thermodynamics

Thermal rectification mechanism of composite cylinders with temperature and stress-dependent interface thermal resistance

Jianning Zhao et al.

Summary: This paper investigates the thermoelastic coupling response of a cylindrical thermal rectifier and analyzes the effects of initial interface gap, boundary conditions, geometry parameters, and material pairs on the thermal rectification ratio using numerical methods. The results show that the equivalent thermal conductance is the key factor for optimizing the thermal rectification ratio, and adjusting the initial interface gap can switch the status of the interface gap and achieve the maximum thermal rectification ratio.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Two-dimensional temperature distribution in FGM sectors with the power-law variation in radial and circumferential directions

Amin Amiri Delouei et al.

Summary: This study presents a steady-state analytical solution for two-dimensional heat conduction in cylindrical segments made of functionally graded materials, utilizing Fourier transform and separation of variables. Sturm-Liouville theory is employed to find adequate Fourier transformations, with continuous variations considered based on power-law functions and non-homogeneous boundary conditions applied. The mathematical robustness and generality of the solution, along with its verification through an illustrative example, are highlighted as primary advantages not often seen in prior literature.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Engineering, Mechanical

Transient response of the hygro-thermo-elastic field in hollow cylinders under heat-moisture shock via hyperbolic non-Fourier heat conduction and non-Fick diffusion

Y. Peng et al.

Summary: A hyperbolic diffusion law is proposed in this paper to study the transient response of the hygro-thermo-elastic field in infinitely long hollow cylinders subjected to sudden heat and moisture shock. The thermal and moisture relaxation time effect between temperature and moisture is significant for composites, and a finite hygrothermal wave speed is achieved.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Thermodynamics

Unsteady ultra-lean combustion of methane and biogas in a porous burner - An experimental study

Rabeeah Habib et al.

Summary: The study investigates the response of ultra-lean flames stabilized in a porous burner to fluctuations imposed on the fuel flow rate, showing that the flame oscillations qualitatively follow the temporal variation in fuel flow but with higher amplitudes for methane compared to biogas. Exposure of the burner to fuel fluctuations for a long time leads to flame destabilization, while stable combustion can be achieved for methane mixtures within certain amplitude ranges. The study also highlights the significant effects of unsteady heat transfer in porous media on flame position fluctuations.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Review Thermodynamics

A Comprehensive Review on Multi-Dimensional Heat Conduction of Multi-Layer and Composite Structures: Analytical Solutions

Amin Amiri Delouei et al.

Summary: This study reviews and classifies existing analytical solutions for heat conduction in multi-layer and composite materials, discussing the complexity of solutions based on different geometries and types of structures. Additionally, it summarizes the critical parameters in the research and provides guidance on future research directions.

JOURNAL OF THERMAL SCIENCE (2021)

Add to Collection

Article Thermodynamics

Temperature distribution in a multi-layer cylinder with circumferentially-varying convective heat transfer boundary conditions

Long Zhou et al.

Summary: Theoretical modeling of thermal conduction in a multilayer cylinder with circumferentially-varying convective heat transfer coefficient on the cylinder surface has been presented in this paper. Results have been shown to be in good agreement with numerical simulations and closed-form solutions for special cases. The impact of various problem parameters on the temperature distribution has been analyzed.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Engineering, Multidisciplinary

A new mathematical technique for analysis of internal viscoplastic flows through rectangular ducts

M. Norouzi et al.

Summary: A semianalytical technique for solving the flow of Bingham yield-stress materials inside rectangular ducts is proposed in this paper, using squircle mapping and the Ritz method for solving nonlinear equations accurately. The method can capture the positions of both the plug and dead regions, and a genetic algorithm approach is implemented for finding optimized solutions. The results are benchmarked against numerical works and the critical Bingham number for different aspect ratios is reported, with an alternative elliptical mapping approach proposed for cases with sufficiently small Bingham numbers.

JOURNAL OF ENGINEERING MATHEMATICS (2021)

Add to Collection

Article Thermodynamics

Asymmetric Conduction in an Infinite Functionally Graded Cylinder: Two-Dimensional Exact Analytical Solution Under General Boundary Conditions

Amin Amiri Delouei et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Thermodynamics

Two-dimensional analytical solution for temperature distribution in FG hollow spheres: General thermal boundary conditions

Amin Amiri Delouei et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Mathematics, Applied

New analytical method based on dynamic response of planar mechanical elastic systems

Maria Luminita Scutaru et al.

BOUNDARY VALUE PROBLEMS (2020)

Add to Collection

Article Mechanics

An analytical and experimental study on dynamics of a circulating Boger drop translating through Newtonian fluids at inertia regime

M. Norouzi et al.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2019)

Add to Collection

Article Physics, Multidisciplinary

Dynamic analysis of multi-layered composite beams reinforced with graphene platelets resting on two-parameter viscoelastic foundation

Saeedeh Qaderi et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2019)

Add to Collection

Article Thermodynamics

A closed-form solution for axisymmetric conduction in a finite functionally graded cylinder

A. Amiri Delouei et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

On 2D asymmetric heat conduction in functionally graded cylindrical segments: A general exact solution

A. Amiri Delouei et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Mathematics, Applied

Hygrothermoelastic response of a hollow cylinder based on a coupled time-fractional heat and moisture transfer model

Xue-Yang Zhang et al.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2019)

Add to Collection

Article Mechanics

Exact analytical solution for steady-state heat transfer in functionally graded sandwich slabs with convective-radiative boundary conditions

Xiaohong Wang et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Thermodynamics

EXPLORATION OF CONVECTIVE HEAT TRANSFER AND FLOW CHARACTERISTICS SYNTHESIS BY Cu-Ag/WATER HYBRID-NANOFLUIDS

Mohsan Hassan et al.

HEAT TRANSFER RESEARCH (2018)

Add to Collection

Article Mechanics

Unsteady flow over a decelerating rotating sphere

M. Turkyilmazoglu

PHYSICS OF FLUIDS (2018)

Add to Collection

Article Thermodynamics

Closed-form analytical solutions of transient heat conduction in hollow composite cylinders with any number of layers

Bingen Yang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Transient thermal analysis in 2D orthotropic FG hollow cylinder with heat source

K. Daneshjou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Exact Analytical Solution for Unsteady Heat Conduction in Fiber-Reinforced Spherical Composites Under the General Boundary Conditions

A. Amiri Delouei et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2015)

Add to Collection

Article Thermodynamics

Temperature distribution and classical entropy generation analyses in an asymmetric cooling composite hollow cylinder with temperature-dependent thermal conductivity and internal heat generation

Mohsen Torabi et al.

ENERGY (2014)

Add to Collection

Article Thermodynamics

Analytical solution to heat conduction in finite hollow composite cylinders with a general boundary condition

Min Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

An effective approach for transient thermal analysis in a functionally graded hollow cylinder

H. M. Wang

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

A general analytical solution for heat conduction in cylindrical multilayer composite laminates

M. H. Kayhani et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

Add to Collection

Article Thermodynamics

NONHOMOGENEOUS HEAT CONDUCTION PROBLEM AND ITS THERMAL DEFLECTION DUE TO INTERNAL HEAT GENERATION IN A THIN HOLLOW CIRCULAR DISK

Kishor R. Gaikwad et al.

JOURNAL OF THERMAL STRESSES (2012)

Add to Collection

Article Nuclear Science & Technology

Finite integral transform method to solve asymmetric heat conduction in a multilayer annulus with time-dependent boundary conditions

Suneet Singh et al.

NUCLEAR ENGINEERING AND DESIGN (2011)

Add to Collection

Article Mathematics, Applied

Optimal Design in Conductivity Under Locally Constrained Heat Flux

Jose Carlos Bellido et al.

ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS (2010)

Add to Collection

Article Mechanics

Thermal stress in rotating functionally graded hollow circular disks

Xu-Long Peng et al.

COMPOSITE STRUCTURES (2010)

Add to Collection

Article Engineering, Multidisciplinary

Thermoelastic analysis of a cylindrical vessel of functionally graded materials

X. L. Peng et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2010)

Add to Collection

Article Thermodynamics

TRANSIENT RESPONSE OF TEMPERATURE AND THERMAL STRESSES IN A FUNCTIONALLY GRADED HOLLOW CYLINDER

Xu-Long Peng et al.

JOURNAL OF THERMAL STRESSES (2010)

Add to Collection

Article Thermodynamics

Exact solution of conductive heat transfer in cylindrical composite laminate

M. H. Kayhani et al.

HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Transient heat conduction in functionally graded thick hollow cylinders by analytical method

S. M. Hosseini et al.

HEAT AND MASS TRANSFER (2007)

Add to Collection

Article Thermodynamics

Orthotropic thermal conductivity effect on cylindrical pin fin heat transfer

Raj Bahadur et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Add to Collection

Article Mechanics

Series solutions of unsteady three-dimensional MHD flow and heat transfer in the boundary layer over an impulsively stretching plate

Hang Xu et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2007)

Add to Collection

Article Mathematics, Applied

Optimal design in two-dimensional conductivity for a general cost depending on the field

Pablo Pedregal

ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS (2006)

Add to Collection

Article Thermodynamics

Transient analytical solution to heat conduction in multi-dimensional composite cylinder slab

X Lu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Thermodynamics

Transient analytical solution to heat conduction in composite circular cylinder

X Lu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Physics, Multidisciplinary

An efficient analytical solution to transient heat conduction in a one-dimensional hollow composite cylinder

X Lu et al.

JOURNAL OF PHYSICS A-MATHEMATICAL AND GENERAL (2005)

Add to Collection

Article Mathematics, Applied

Numerical solutions for the hyperbolic heat conduction problems in a layered solid cylinder with radiation surface

KC Liu et al.

APPLIED MATHEMATICS AND COMPUTATION (2005)

Add to Collection

Article Thermodynamics

Analytical solution of transient heat conduction in a two-layer anisotropic cylindrical slab excited superficially by a short laser pulse

ND Milosevic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

Add to Collection

Article Thermodynamics

End effects of heat conduction in circular cylinders of functionally graded materials and laminated composites

JQ Tarn et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

Add to Collection

Article Mechanics

General solution for mechanical and thermal stresses in a functionally graded hollow cylinder due to nonaxisymmetric steady-state loads

M Jabbari et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2003)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads

A Jabbari et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.