Sonochemical advanced oxidation process for the degradation of furosemide in water: Effects of sonication?s conditions and scavengers

The intensive consumption of pharmaceuticals and drugs in the last decades has led to their increased con-centrations in wastewaters from industrial sources. The present paper deals, for the first time, with the sono-chemical degradation and mineralization of furosemide (FSM) in water. FSM is a potent loop diuretic used to treat fluid build-up due to heart failure, liver scarring, or kidney disease. The influence of several operating parameters such as acoustic intensity, ultrasonic frequency, initial FSM concentration, solution's pH, nature of the dissolved gas (Ar, air and N2) and radical scavengers (2-propanol and tert-butanol) on the oxidation of FSM was assessed. The obtained results showed that the degradation rate of the drug increased significantly with the increase of the acoustic intensity in the range of 0.83 to 4.3 W cm-2 and decreased with the augmentation of the frequency in the range of 585-1140 kHz. It was also found that the initial rate of the sonolytic degradation of FSM increased with the increase of its initial concentration (2, 5, 10, 15 and 20 mg/L). The most significant degradation was achieved in acidic conditions at pH 2, while in terms of saturating gas, the rate of FSM degradation decreased in the order of Ar > air > N2. The FSM degradation experiments with radical scavengers showed that the diuretic molecule degraded mainly at the interfacial region of the bubble by hydroxyl radical attack. Additionally, in terms of acoustic conditions, the sono-degradation of 30.24 mu mol L-1 of FSM solution demonstrate an optimal performance at 585 kHz and 4.3 W/cm2, the results indicated that even if the ultrasonic action eliminated the total concentration of FSM within 60 min, a low degree of mineralization was obtained due to the by-products formed during the sono-oxidation process. The ultrasonic process transforms FSM into biodegradable and environmentally friendly organic by-products that could be treated in a subsequent biological treatment. Besides, the efficiency of the sonolytic degradation of FSM in real environmental matrices such as natural mineral water and seawater was demonstrated. Consequently, the sonochemical advanced oxidation process represent a very interesting technique for the treatment of water contaminated with FSM.

Automated summary

The intensive use of pharmaceuticals and drugs has resulted in increased concentrations of these substances in industrial wastewater. This study examined the degradation and mineralization of furosemide (FSM) in water using sonochemical processes. The results showed that the degradation rate of FSM increased with higher acoustic intensity and lower ultrasonic frequency. The initial concentration of FSM also influenced the degradation rate. These findings suggest that sonochemical advanced oxidation processes can be an effective technique for treating water contaminated with FSM.