☆ 4.7 Article

Experimental and numerical study on the mixed lubrication performances of a new bearing

TRIBOLOGY INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Experimental and numerical exploration on the nonlinear dynamic behaviors of a novel bearing lubricated by low viscosity lubricant

Zhongliang Xie et al.

Summary: The high temperature liquid Lead-Bismuth (PbBi) solution lubricated bearing plays a crucial role in the two-circuit main loop system of nuclear power stations. This study developed revised dynamic lubrication models considering cavitation effects and investigated the influences of clearances, rotating speeds, eccentricity ratios, and annular guiding grooves on the hydrodynamic characteristics. The results confirm the relationship between peak pressure, speeds, and eccentricity ratios, as well as the impact of clearances on maximum/minimum pressure. Theoretical analysis coincided with experimental data, verifying the rationality and correctness of the lubrication models.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Add to Collection

Article Engineering, Aerospace

Nonlinear characteristic investigation of magnetorheological damper-rotor system with local nonlinearity

Jun Wang et al.

Summary: Magnetorheological (MR) dampers have excellent performance in reducing rotor vibration, but their high nonlinearity can lead to nonsynchronous response, resulting in fatigue and instability of rotors. This study focuses on the nonlinear characteristics of MR dampers mounted on flexible rotors. A hybrid numerical method is proposed to solve the nonlinear motion equations of the MR damper-rotor system. Experimental studies are conducted to evaluate the effects of different system parameters on the nonlinear dynamic behaviors of the MR damper-rotor system. The results show that suitable excitation current and oil supply pressure can effectively alleviate the level of nonlinearity.

CHINESE JOURNAL OF AERONAUTICS (2023)

Add to Collection

Article Engineering, Mechanical

Theoretical and experimental study on the fluid-structure-acoustic coupling dynamics of a new water lubricated bearing

Zhongliang Xie et al.

Summary: This study presents a breakthrough in the performance of load increase, drag reduction, vibration decrease and noise containment through the design of a double-liner bearing structure. By constructing a fluid-structure-acoustic interaction hydrodynamic model and analyzing the lubrication performances considering cavitation effects and sound radiation, the study investigates the fluid-structure-acoustic characteristics and sound radiation laws with different material combinations, as well as the effects of operating conditions on deformation and stress. The results show a close relationship between acoustic performances and material combinations.

TRIBOLOGY INTERNATIONAL (2023)

Add to Collection

Article Engineering, Mechanical

The fluid-structure interaction lubrication performances of a novel bearing: Experimental and numerical study

Zhongliang Xie et al.

Summary: This paper proposes a novel double-liner bearing to overcome the disadvantages of traditional water-lubricated single-liner bearings, aiming for breakthroughs in high-load, low-resistance, vibration attenuation, and noise reduction performances. By establishing a fluid-structure interaction dynamic model of the sandwich liner bearing and considering turbulent effects, the influences of eccentricity ratios and liner thickness on lubrication performance are studied, revealing the evolution mechanisms of liner thickness on lubrication performances. The results demonstrate superior lubrication behaviors in the sandwich liner bearing. This study enriches the theoretical systems of lubrication and provides new ideas and approaches for bearing design and R&D, which is of significant importance.

TRIBOLOGY INTERNATIONAL (2023)

Add to Collection

Review Engineering, Mechanical

A state-of-art review on the water-lubricated bearing

Zhongliang Xie et al.

Summary: This paper provides a detailed summary of water-lubricated bearings in five typical aspects: lubrication regime, fluid-solid interaction (FSI), thermal effect, tribological behaviors, and vibration-noise performances. It extracts and acquires the influencing factors, judgement criteria, and lubrication mechanism of the lubrication regime. The methodology and parameters influencing temperature rise are summarized. The generation mechanism of tribological behaviors and vibration & noise is obtained. The paper systematically combs and summarizes the theories and methods of water-lubricated bearings, pointing out the existing problems and urgent technologies that need to be solved. The findings can serve as a distinct theoretical and methodological reference for further investigation on water-lubricated bearings.

TRIBOLOGY INTERNATIONAL (2023)

Add to Collection

Article Engineering, Marine

Modeling and calculation of acoustic radiation of underwater stiffened cylindrical shells treated with local damping

Ming-Song Zou et al.

Summary: Damping materials are widely used to reduce vibration and noise in ships and underwater vehicles. This paper introduces a method to calculate the vibration and acoustic radiation from locally damped cylindrical shells immersed in water. Two types of vibration and noise reduction measures are analyzed, providing reference for the development of damping technology in ships and underwater vehicles.

MARINE STRUCTURES (2023)

Add to Collection

Article Thermodynamics

Piezoelectric energy harvester for rolling bearings with capability of self-powered condition monitoring

Liufeng Zhang et al.

Summary: An energy harvester is proposed in this paper for scavenging rotational energy from rotating machines, which can not only power sensors but also detect bearing faults. The output performance of the energy harvester is evaluated through experiments, and the effects of rotating speed, rotor weight, shaft span, and matched resistances on its performance are comprehensively discussed.

ENERGY (2022)

Add to Collection

Article Engineering, Mechanical

Elastohydrodynamic behavior analysis on water-lubricated journal bearing: a study of acoustic and tribological performance based on CFD-FSI approach

Mohammad Tauviqirrahman et al.

Summary: This study investigates the tribological and acoustic behavior of water-lubricated journal bearing using a comprehensive simulation method. The results show that bearing deformation has a significant impact on tribological characteristics, while bearing noise is weakly sensitive to bearing material. Additionally, the study discusses the effect of operating conditions on acoustic and tribological performance.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

An investigation on the lubrication characteristics of floating ring bearing with consideration of multi-coupling factors

Zhongliang Xie et al.

Summary: The paper investigates the static and dynamic lubrication parameters of the floating ring bearing (FRB) by proposing modified lubrication models and utilizing multiscale methods to enhance calculation accuracy and efficiency. The study analyzes the influence of various factors on lubrication performances and concludes that the clearance ratio affects the inner oil film while the vertical load influences the bearing's lubrication performances. These conclusions are applicable to similar floating ring bearings.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Marine

BEM-FEM coupling for the hydroelastic analysis of propeller-shafting systems in non-uniform flows

Jiasheng Li et al.

Summary: Understanding the hydroelastic behavior of the fluid-propeller-shafting system is crucial for reducing vibration and noise in underwater vehicles. A method combining a three-dimensional panel method with a three-dimensional finite element method for analyzing the hydroelastic dynamics of fully coupled propeller and shafting systems in non-uniform flows has been developed. The study finds that designers need to consider the elastic coupling effect between the shaft and propeller, especially with high-skew propellers. Additionally, the uncoupled model underestimates fluid-induced damping.

OCEAN ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic performance of a novel integral magnetorheological damper-rotor system

Jun Wang et al.

Summary: Magnetorheological dampers (MRDs) are effective in vibration control in rotor systems, but they have limitations in dealing with nonlinear behaviors under large eccentricity and controlling the direction of damping force. To address these issues, this paper proposes an integral magnetorheological damper (IMRD) that allows adjustable magnitude and direction of oil film force. The IMRD model is implemented in a flexible rotor system, and the results show that IMRD can provide pure damping with adjustable stiffness and reduce nonlinearity compared to traditional MRDs.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Theoretical and experimental exploration into the fluid structure coupling dynamic behaviors towards water-lubricated bearing with axial asymmetric grooves

Zhongliang Xie et al.

Summary: This study investigates the fluid structure interaction (FSI) dynamic behaviors of water-lubricated bearings with axial asymmetric grooves. Revised FSI models considering cavitation and turbulent effects are proposed. The simulations are consistent with existing literature and experimental data, confirming the accuracy of the model. The effects of groove types and locations on dynamic behaviors are systematically explored, showing that the separation effects of the local asymmetric grooves coupled with the rotation effects enhance the hydrodynamic effects, leading to increased maximum pressure values and load carrying capacity (LCC).

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Nonlinear behaviors analysis of high-speed rotor system supported by aerostatic bearings

Jianbo Zhang et al.

Summary: In this paper, a dynamic model of the aerostatic bearing-rotor system is established to investigate the influences of rotational speed, unbalance, rotor mass, and supply pressure on the nonlinear behaviors of the system. The results demonstrate various nonlinear phenomena, including periodic and quasi-periodic motions. Additionally, it is found that proper adjustments of the unbalance, rotor mass, and supply pressure can control the nonlinear vibration and enhance system stability.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Mechanical

Effect of lubricant selection on the wear characteristics of spur gear under oil-air mixed lubrication

Jiang Zhao et al.

Summary: Considering tooth surface micro-morphology, a coupling analysis model for wear characteristics of involute gear under mixed lubrication was established. The mixture of squalane base oil and polyisoprene showed higher film thickness and lower coefficient of friction compared to polyalphaolefin oil and mineral oil. Increasing lubricant viscosity was found to reduce direct rough contact area and load ratios, thereby reducing wear.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Mechanical

Water-lubricated stern tube bearing - experimental and theoretical investigations of thermal effects

M. Wodtke et al.

Summary: The research focuses on thermal phenomena related to the operation of a water-lubricated stern tube bearing with axial grooves. Experimental tests showed that the intensity of forced axial flow significantly affects the bush temperature. Numerical simulations revealed that restricted axial flow leads to backflow of water through the grooves, resulting in a higher backflow temperature than the supply temperature and an increase in bearing bush temperature.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Engineering, Mechanical

Theoretical and experimental investigation on the influences of misalignment on the lubrication performances and lubrication regimes transition of water lubricated bearing

Zhongliang Xie et al.

Summary: This paper investigates the influences of misalignment on the lubrication performances of water lubricated bearing, proposing a modified lubrication model. Results show that misalignment increases maximum pressure and shear stress, decreases minimum film thickness, reduces certain lubrication regions, ultimately deteriorating lubrication performances on the interface.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing

Zhongliang Xie et al.

Summary: The paper investigates the micro asperity contact load ratios and lubrication states of water-lubricated bearings. New coupled models are proposed to consider the micro-scale effects of asperity contact. The study establishes the relevance of load ratio with transition of lubrication regimes under various structural parameters and operating conditions, revealing the mechanism of regimes transition at the micro level. Experimental measurements verify the correctness of the revised model.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Engineering, Mechanical

Theoretical and experimental research on the micro interface lubrication regime of water lubricated bearing

Zhongliang Xie et al.

Summary: This paper aims to reveal the micro interface lubrication regimes of water lubricated bearings through computational fluid dynamic analysis. The influences of operating conditions and dimensionless structural parameters on fluid features are explored, and experimental data verifies the correctness of the lubrication model. The research results lay a solid foundation for further optimal design of such bearings.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Effects of spherical-platform texture parameters on the tribological performance of water-lubricated bearings

Zhiwei Guo et al.

Summary: This study investigated the effects of different surface spherical-platform texture parameters on the tribological performance of water-lubricated bearings. It was found that spherical-platform textures had a positive impact on the bearing's tribological performance. Specimens with 1/2 spherical-platform texture showed the best ability to improve lubrication, enhancing the bearing's frictional properties.

WEAR (2021)

Add to Collection

Article Engineering, Mechanical

A mixed lubrication analysis of a thrust bearing with fractal rough surfaces

Xiaohan Zhang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)

Add to Collection

Article Nuclear Science & Technology

Dynamic characteristics analysis of the hydro-hybrid liquid Sodium lubricated bearing-rotor coupled system in the two-circuit main loop liquid sodium pump system

Zhongliang Xie et al.

ANNALS OF NUCLEAR ENERGY (2020)

Add to Collection

Article Engineering, Chemical

Investigation on the angular contact ball bearings under low speed and heavy load with coupled mixed lubrication and quasi-dynamic analysis

Jiqiang Wu et al.

LUBRICATION SCIENCE (2020)

Add to Collection

Article Engineering, Mechanical

Experimental research on the interface lubrication regimes transition of water lubricated bearing

Zhongliang Xie et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Thermal turbulent lubrication analysis of rough surface journal bearing with journal misalignment

Shaoyu Zhu et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Nuclear Science & Technology

Investigation on effects of Fluid-Structure-Interaction (FSI) on the lubrication performances of water lubricated bearing in primary circuit loop system of nuclear power plant

Zhongliang Xie et al.

ANNALS OF NUCLEAR ENERGY (2020)

Add to Collection

Article Engineering, Mechanical

Circumferential film thickness measurement in journal bearings via the ultrasonic technique

S. Beamish et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Engineering, Mechanical

Friction-induced vibration and noise of marine stern tube bearings considering perturbations of the stochastic rough surface

Chang-Gang Lin et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Engineering, Mechanical

Investigations of the static and dynamic characteristics of water-lubricated hydrodynamic journal bearing considering turbulent, thermohydrodynamic and misaligned effects

Huihui Feng et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Engineering, Mechanical

Thermo-Elasto-Hydrodynamic analysis and optimization of rubber-supported water-lubricated thrust bearings with polymer coated pads

Xingxin Liang et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Engineering, Mechanical

An experimental framework for determining wear in porous journal bearings operated in the mixed lubrication regime

S. J. Eder et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

An investigation into the transient behavior of journal bearing with surface texture based on fluid-structure interaction approach

Qiyin Lin et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

A two-way FSI analysis of multiphase flow in hydrodynamic journal bearing with cavitation

D. Y. Dhande et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)

Add to Collection

Article Engineering, Manufacturing

Tribological effects of a rough surface bearing using an average flow analysis with a contact model of asperities

Miru Kim et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)

Add to Collection

Article Engineering, Mechanical

Multibody dynamics of pivot slipper pad thrust bearing in axial piston machines incorporating thermal elastohydrodynamics and mixed lubrication model

Sohil Hashemi et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

Simulation of journal bearing friction in severe mixed lubrication - Validation and effect of surface smoothing due to running-in

D. E. Sander et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

A velocity-slip model for analysis of the fluid film in the cavitation region of a journal bearing

Feng Cheng et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

On the effect of surface roughness in point-contact EHL: Formulas for film thickness and asperity load

M. Masjedi et al.

TRIBOLOGY INTERNATIONAL (2015)

Add to Collection

Article Engineering, Mechanical

Mixed-lubrication analysis of marine stern tube bearing considering bending deformation of stern shaft and cavitation

Tao He et al.

TRIBOLOGY INTERNATIONAL (2014)

Add to Collection

Article Engineering, Mechanical

Study of contact of rough surfaces: Modeling and experiment

Stanislaw Kucharski et al.

WEAR (2014)

Add to Collection

Article Engineering, Mechanical

Effect of Roughness Orientation on the Elastohydrodynamic Lubrication Film Thickness

Dong Zhu et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2013)

Add to Collection

Article Engineering, Mechanical

Analysis on the lubrication performances of journal bearing system using computational fluid dynamics and fluid-structure interaction considering thermal influence and cavitation

Qiyin Lin et al.

TRIBOLOGY INTERNATIONAL (2013)

Add to Collection

Article Engineering, Mechanical

Non-conventional inverse-Stribeck-curve behaviour and other characteristics of DLC coatings in all lubrication regimes

M. Kalin et al.

WEAR (2013)

Add to Collection

Article Engineering, Mechanical

Multi-scale friction modelling for rough contacts under sliding conditions

D. K. Karupannasamy et al.

WEAR (2013)

Add to Collection

Article Engineering, Mechanical

On the λ ratio range of mixed lubrication

Dong Zhu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2012)

Add to Collection

Article Engineering, Mechanical

Refined simulation of friction power loss in crank shaft slider bearings considering wear in the mixed lubrication regime

C. Priestner et al.

TRIBOLOGY INTERNATIONAL (2012)

Add to Collection

Article Engineering, Mechanical

Asperity micro-contact models as applied to the deformation of rough line contact

Ali Beheshti et al.

TRIBOLOGY INTERNATIONAL (2012)

Add to Collection

Article Engineering, Mechanical

Theoretical Modeling for Microgrooved Journal Bearings Under Mixed Lubrication

Katsuhiro Ashihara et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Engineering, Mechanical

On the influence of surface roughness on real area of contact in normal, dry, friction free, rough contact by using a neural network

M. P. Rapetto et al.

WEAR (2009)

Add to Collection

Article Engineering, Mechanical

The Stribeck curve and lubrication design for non-fully wetted surfaces

M. Kalin et al.

WEAR (2009)

Add to Collection

Article Engineering, Mechanical

Influence of Mixed-Lubrication and Rough Elastic-Plastic Contact on the Performance of Small Fluid Film Bearings

Mihai B. Dobrica et al.

TRIBOLOGY TRANSACTIONS (2008)

Add to Collection

Article Engineering, Mechanical

Mixed elastohydrodynamic lubrication in a partial journal bearing-comparison between deterministic and Stochastic models

Mihai B. Dobrica et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2006)

Add to Collection

Article Engineering, Mechanical

The investigation of contact ratio in mixed lubrication

JB Luo et al.

TRIBOLOGY INTERNATIONAL (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.