4.7 Article

Using the RSM to evaluate the rheological behavior of SiO2 (60%)- MWCNT (40%)/SAE40 oil hybrid nanofluid and investigating the effect of different parameters on the viscosity

Related references

Note: Only part of the references are listed.
Review Food Science & Technology

Enhancement of bioavailability and bioactivity of diet-derived flavonoids by application of nanotechnology: a review

Hui Teng et al.

Summary: Flavonoids, a class of widely existing polyphenols in food and medicine, have various pharmacological effects such as anti-oxidative, anticancer, and anti-inflammatory effects. However, their low bioavailability limits their clinical application, which is related to their intestinal absorption and metabolism. This review aims to establish the structural requirements of flavonoids for notable anticancer, anti-inflammatory, and antioxidant effects, and discuss the use of nanotechnology for safe delivery of flavonoids in food matrices.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2023)

Article Thermodynamics

Heat transfer enhancement in oblique finned curved microchannel using hybrid nanofluid

R. Vinoth et al.

Summary: The experimental study analyzed the heat transfer characteristics of an oblique finned curved microchannel heat sink with different working fluids. The results showed that the curved microchannel heat sink had higher heat transfer rate, PEC and pressure drop compared to the straight channel heat sink. When using a hybrid nanofluid, the heat transfer rate of the curved microchannel heat sink was also higher.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Article Multidisciplinary Sciences

Simultaneous effects of MWCNT and SiO2 on the rheological behavior of cooling oil and sensitivity analysis

Mousa Rejvani et al.

Summary: The rheological behavior of a new generation of lubricants, consisting of SiO2 nanoparticles and MWCNT dispersed in 10W40 engine oil, has been investigated. The nano-lubricant exhibits Bingham pseudo-plasticity below 55 degrees C and changes to Bingham dilatancy at 55 degrees C. Compared to the base lubricant, the nano-lubricant shows a 32% increase in viscosity. A new correlation with high precision and a sensitivity analysis on the effect of volume fraction and temperature on viscosity have been presented.

HELIYON (2023)

Article Thermodynamics

Intensification of thermal efficiency of a cross-flow heat exchanger under turbulent flow conditions using CuFe2O4/water nanofluid

D. Kalantari et al.

Summary: In this study, the effect of CuFe2O4/water nanofluid on heat transfer rate in a cross-flow type heat exchanger under turbulent flow conditions was investigated. The results showed a significant improvement in heat transfer rate compared to distilled water when using a volume percentage of 0.1% of nanoparticles.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Review Thermodynamics

Study on heat transfer performance of immersion system based on SiC/white mineral oil composite nanofluids

Qingyi Luo et al.

Summary: With the rapid growth of the global digital economy, the number and scale of data centers are expanding, leading to a significant increase in energy consumption. Immersion cooling, which uses a low thermal conductivity working medium, is a promising solution for managing high heat flux density servers in data centers. This study explores the heat transfer performance of SiC/white mineral oil-based nanofluids as a new coolant and oil as a traditional coolant under different heat loads. The results show that the new coolant can significantly improve heat transfer efficiency and reduce high-temperature areas, making it a reliable and promising option for submerged cooling systems.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Article Thermodynamics

Experimental and numerical investigation on heat transfer and pressure drop of SiO2 and Al2O3 oil-based nanofluid characteristics through the different helical tubes under constant heat fluxes

Seyedmahmood Kia et al.

Summary: In this study, the heat transfer and pressure drop properties of Al2O3 and SiO2/Base oil nanofluid flow in a helical tube were investigated numerically and experimentally. The impact of various parameters, including flow Reynolds number, fluid temperature, nanoparticles, and weight concentrations, on the heat transfer factor and pressure drop was analyzed. The results showed that nanofluid enhanced the heat transfer factor and pressure drop compared to the base fluid. The Al2O3 nanofluid exhibited higher heat transfer coefficient than the SiO2 nanofluid. The maximum heat transfer rate was achieved with 0.5% mass concentrations of Al2O3 and SiO2 nanofluids. The helical tube geometry improved heat transfer by 19.5%, and reducing helical pitch and pitch circle diameter further enhanced the heat transfer.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Article Chemistry, Multidisciplinary

Experimental study and development of mathematical model using surface response method to predict the rheological performance of CeO2-CuO/10W40 hybrid nanolubricant

Mojtaba Sepehrnia et al.

Summary: This study experimentally assesses the rheological behavior of CeO2-CuO/10W40 hybrid nanolubricant under various volume fractions, temperatures, and shear rates. The viscosity measurements show that both the 10W40 engine oil and hybrid nanolubricant exhibit non-Newtonian behavior. The experimental results also demonstrate that viscosity decreases with increasing shear rate at T = 45 degrees C and VF = 1.25%.

ARABIAN JOURNAL OF CHEMISTRY (2023)

Article Thermodynamics

Heat transfer and flow characteristic of a flat confined loop thermosyphon with ternary hybrid nanofluids for electronic devices cooling

Xianling Wang et al.

Summary: The purpose of this study was to investigate the feasibility of using ternary hybrid nanofluids in heat pipes and their effect on the operation performance of flat confined loop thermosiphon (FCLTS). Al2O3:Cu:TiO2 ternary hybrid nanofluids with different mixing ratios and concentrations were prepared. The synergistic effect of thermal conductivity enhancement was analyzed and the optimal mixing ratio of 4:2:4 was obtained. The thermal performance of an FCLTS with Al2O3:Cu:TiO2 nanofluids was investigated, revealing the improved wettability of the upper surface and the optimal conditions for enhanced heat transfer.

APPLIED THERMAL ENGINEERING (2023)

Editorial Material Energy & Fuels

Advances in the Development of New Heat Transfer Fluids Based on Nanofluids

Gianpiero Colangelo et al.

ENERGIES (2023)

Article Nanoscience & Nanotechnology

The Experimental Investigation of Heat Transfer Properties and Pressure Drop of a Corrugated Plate Heat Exchanger Using a Chemically Synthesised Zinc Oxide/Alkaline Water Nano Fluid

M. Anish et al.

Summary: An experiment was conducted to investigate the effects of chemically synthesized Zinc Oxide-Alkaline/water nanofluid on the pressure drop and heat convection properties of a corrugated plate heat exchanger. The results showed that increasing the weight concentration of nanofluid improved the heat transfer performance.

JOURNAL OF NANOFLUIDS (2023)

Article Thermodynamics

Experimental study on the influence of bionic channel structure and nanofluids on power generation characteristics of waste heat utilisation equipment

Jianglin Tu et al.

Summary: A bionics-based cogeneration system was designed in this study to improve waste heat utilization, with experimental results showing that using CuO-H2O nanofluids can increase the temperature at the hot end of a thermoelectric plate. The highest thermoelectric conversion efficiency was achieved with bionic structures featuring an angular frequency of 30 rad/s, an amplitude of 3 mm, and a phase shift of 180 degrees, providing guidance for the design and operation of waste heat utilization equipment.

APPLIED THERMAL ENGINEERING (2022)

Article Thermodynamics

A well-trained artificial neural network (ANN) using the trainlm algorithm for predicting the rheological behavior of water - Ethylene glycol/WO3 - MWCNTs nanofluid

Guangli Fan et al.

Summary: This study analyzed the influence of volume fraction of nanoparticle and temperatures on the dynamic viscosity of water-ethylene glycol/WO3-MWCNTs hybrid nanofluid, and used an Artificial Neural Network (ANN) for prediction. The results showed that temperature had an inverse effect on dynamic viscosity, with a more noticeable effect at higher volume fractions.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Automation & Control Systems

The effect of different parameters on ability of the proposed correlations for the rheological behavior of SiO2-MWCNT (90:10)/SAE40 oil-based hybrid nano-lubricant and presenting five new correlations

Mohammad Hemmat Esfe et al.

Summary: The rheological behavior and viscosity of SiO2-MWCNT/SAE40 oil-based hybrid nano-lubricant were investigated, and new correlation relationships were presented to predict viscosity.

ISA TRANSACTIONS (2022)

Article Energy & Fuels

Laboratory study and field application of amphiphilic molybdenum disulfide nanosheets for enhanced oil recovery

Ming Qu et al.

Summary: Spherical nanoparticles have been widely studied for enhanced oil recovery, but there is a lack of research on nanosheets. In this study, amphiphilic molybdenum disulfide nanosheets were synthesized and shown to have significant effects on solid surface wettability and emulsion stability at ultra-low concentrations.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Nanofluidics for sub-single cellular studies: Nascent progress, critical technologies, and future perspectives

Jinbin Yang et al.

Summary: The burgeoning trend in cell studies is to investigate sub-single cellular matters in order to gain deeper insights into fundamental cell biology. Nanofluidics, with its capability to handle ultra-small samples and manipulate subcellular matters at a high throughput, holds great potential for sub-single cellular studies.

CHINESE CHEMICAL LETTERS (2022)

Article Engineering, Mechanical

Heat Transfer Performance and Structural Optimization of a Novel Micro-channel Heat Sink

Jianhua Xiang et al.

Summary: In this study, a thermal resistance theoretical model of a micro-channel heat sink was established and the heat transfer performance of the fabricated micro-channel heat sink was tested. The results showed that the micro-channel heat sink had superior heat dissipation performance compared to conventional heat sinks. Orthogonal optimization of the micro-channel structures further improved the heat dissipation performance.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2022)

Article Engineering, Chemical

Numerical study of free surface axisymmetric jet impinging on a heated flat surface utilizing high concentration SiO2 nanofluid

Wael M. El-Maghlany et al.

Summary: A comprehensive numerical study was conducted to investigate the heat transfer and fluid flow characteristics between a vertical free surface jet and a horizontal heated plate. The results showed that the utilization of SiO2 nanoparticles can significantly improve the average Nusselt number, while the nozzle to plate aspect ratio has a minor influence.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Article Green & Sustainable Science & Technology

The stability, optical behavior optimization of Ag@SiO2 nanofluids and their application in spectral splitting photovoltaic/thermal receivers

Ju Huang et al.

Summary: In this study, a nanofluid filter based on propylene glycol and Ag@SiO2 nanoparticles was fabricated for photovoltaic/thermal systems. The stability and optical characteristics of the filter were assessed, and the optimized nanofluid parameters were determined for efficient filtering of Si and GaAs solar cells. The results showed that the nanofluid filter retained its optical properties under various conditions. The combination of the optimized nanofluids with Si cells achieved a higher value of merit function compared to literature values.

RENEWABLE ENERGY (2022)

Article Energy & Fuels

Thermal performance and behavior analysis of SiO2, Al2O3 and MgO based nano-enhanced phase-changing materials, latent heat thermal energy storage system

Santosh Kumar Singh et al.

Summary: This study investigates the effects of nanodoping on the thermal performance and overall behavior of PCM-based LHTES systems. The results show that the inclusion of nanoparticles significantly enhances the charging and discharging rates, but also decreases the thermal energy storage capacity. SiO2 doped PCM samples exhibit better thermal response and are suitable for commercial applications.

JOURNAL OF ENERGY STORAGE (2022)

Article Thermodynamics

Thermo-hydraulic performance improvement with nanofluids of a fish-gill-inspired plate heat exchanger

Merve Goltas et al.

Summary: This study improves the thermo-hydraulic performance of plate heat exchangers (PHEs) by designing fish gill grooves on the plate surface. The use of nano-fluids enhances heat transfer and reduces pressure drop.

ENERGY (2022)

Article Engineering, Multidisciplinary

Numerical study on performance of double-fluid parabolic trough solar collector occupied with hybrid non-Newtonian nanofluids: Investigation of effects of helical absorber tube using deep learning

Jawed Mustafa et al.

Summary: The influences of a helical absorber tube on the thermal performances of a double-fluid parabolic trough solar collector occupied by non-Newtonian nanofluid are investigated numerically. The results show that the volume fraction and nanoparticle diameter of the nanofluid have significant effects on the efficiency of the collector, and an artificial neural network can accurately predict the efficiency.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2022)

Article Thermodynamics

An experimental study on the performance of water-based CuO nanofluids in a plate heat exchanger

Burhan Cuhadaroglu et al.

Summary: This study experimentally analyzed the hydrodynamic and thermal performance of a plate heat exchanger using CuO nanofluid in a modeled heating system, finding that nanofluids can effectively improve heat conduction and heat exchanger effectiveness. A new correlation equation for CuO nanofluid's thermal performance was proposed, considering volume fraction as well as Reynolds and Prandtl numbers.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Chemistry, Multidisciplinary

Carbonyl sulfide gas detection by pure, Zn- and Cd-decorated AlP nano-sheet

Ngakan Ketut Acwin Dwijendra et al.

Summary: Density functional theory was used to investigate the effect of decorating Zn and Cd transition metals on an AlP nano-sheet's capability in detecting the gas COS. It was found that decorating Cd significantly increased the sensitivity of the AlP nano-sheet to COS, compared to decorating Zn.

MONATSHEFTE FUR CHEMIE (2022)

Proceedings Paper Materials Science, Multidisciplinary

The effect of nanoparticles composition ratio on dynamic viscosity of Al2O3-TiO2-SiO2 nanofluids

Anwar Ilmar Ramadhan et al.

Summary: In recent research, the focus has been on improving the thermo-physical properties of single-component nanofluids, but now there is a development of hybrid nanofluids to enhance heat transfer. This study investigated the dynamic viscosity of Al2O3-TiO2-SiO2 nanoparticles in different composition ratios and found that the mixing ratio of CR 3 (20:64:16) had the lowest relative viscosity. The three distinct nanoparticles in the mixing ratio were identified as the control and performance factors in this study.

MATERIALS TODAY-PROCEEDINGS (2022)

Article Thermodynamics

Thermo-hydraulic performance of nanofluids in a bionic heat sink

Jinghua Tang et al.

Summary: The study focuses on the development of a bionic surface based on the wing structure of the dragon louse for thermal management in electronic components, as well as the behavior of Fe3O4-water nanofluids under magnetic field. Various factors affecting heat transfer, such as nanofluid concentration, Reynolds number, magnetic field angle, and intensity, were considered. Results show that the bionic surface has a significant drag reduction effect and the magnetic field has a notable influence on CPU cooling.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Natural convective heat transfer investigation of nanofluids affected by electrical field with periodically changed direction

Yanjun Chen et al.

Summary: The study focuses on the resuspension and natural convective heat transfer of nanofluids under the influence of an electrical field with periodically changed direction. Results show that nanoparticles can be stably resuspended by the periodically changing electrical field, leading to significantly enhanced heat transfer performance compared to the pure base fluid. This enhancement is influenced by factors such as voltage, concentration, and direction switching time. The proposed heat transfer prediction model for nanofluids under these conditions shows acceptable reliability.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Engineering, Chemical

Numerical simulation of flow and heat transfer characteristics of nanofluids in built-in porous twisted tape tube

Yuxing Wang et al.

Summary: The study showed that triangular tubes have better heat transfer efficiency compared to round tubes, and the use of porous twisted tape and nanofluids can significantly improve system economy and heat transfer ability, but it also comes with disordered flow and increased entropy within the tubes.

POWDER TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Combination of RSM and NSGA-II algorithm for optimization and prediction of thermal conductivity and viscosity of bioglycol/water mixture containing SiO2 nanoparticles

Yan Cao et al.

Summary: The study showed that adding silicon dioxide nanoparticles to bioglycol/water mixture can enhance thermal conductivity but also increase fluid viscosity. By optimizing to maximize thermal conductivity and minimize viscosity, the optimal temperature was found to be 80 degrees Celsius.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Physical

An experimental determination and accurate prediction of dynamic viscosity of MWCNT(%40)-SiO2 (%60)/5W50 nano-lubricant

Mohammad Hemmat Esfe et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Article Chemistry, Physical

A study on rheological characteristics of hybrid nano-lubricants containing MWCNT-TiO2 nanoparticles

Mohammad Hemmat Esfe et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)