Investigations into the local buckling and post-buckling behaviour of fixed-ended hybrid I-section stub columns with slender web

It has been known that thin plate can carry loads considerably more than the buckling loads. This phenomenon is defined as the post-buckling behaviour, which is affected by material properties, geometric dimensions and boundary conditions of the plate. Hybrid I-section is a design concept where flanges are made of high strength steel and web is made of lower steel grade. In order to investigate the effect of slender web on the local buckling and post buckling of hybrid I-section under pure compression, experimental studies of twelve fixed-ended I-section stub columns with slender web were conducted. Tensile coupon tests and initial local geometric imperfection measurement were carried out before stub column tests. Experimental and theoretical methods for determining the critical local buckling load of plate elements were discussed, followed by a post-test finite element analysis to investigate the effects of stub column length and sectional steel combination on the buckling behaviour. Based on the experimental and numerical results, it was observed that for specimens which web plate failed by elastic local buckling, the ultimate test loads are affected by the web strength grade, indicating that the unbuckled portion of slender web plate still provides the post-buckling strength for I-section stub columns even after yielding. By comparing the existing design methods with the numerical ultimate loads, it was found that the Eurocode 3 gives the less scattered predictions than the North American code, Australian code and Chinese code, as well as the existing direct strength method and continuous strength method.

Automated summary

This article investigates the effect of a slender web on the local buckling and post-buckling behavior of hybrid I-sections under compression. Experimental and numerical analyses show that the unbuckled portion of the slender web plate provides post-buckling strength for the I-section stub columns. Comparing existing design methods, the Eurocode 3 provides more accurate predictions than the North American, Australian, and Chinese codes, as well as the existing direct strength and continuous strength methods.