Related references
Note: Only part of the references are listed.Experimental and numerical studies on influence of impact damage and simple bolt repair on compressive failure of composite laminates
Dongfeng Cao et al.
COMPOSITE STRUCTURES (2021)
Mechanical Properties of Thin-Ply Composites Based on Acoustic Emission Technology
Kaidong Zheng et al.
MATERIALS (2021)
Experimental and numerical studies of the open-hole compressive strength of thin-ply CFRP laminates
Kota Takamoto et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
A combined experimental and computational analysis of failure mechanisms in open-hole cross-ply laminates under flexural loading
Qingping Sun et al.
COMPOSITES PART B-ENGINEERING (2021)
Damage progression and failure of single-lap thin-ply laminated composite bolted joints under quasi-static loading
Yuejie Cao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
In-situ imaging of inter- and intra-laminar damage in open-hole tension tests of carbon fibre-reinforced composites
Fatih E. Oz et al.
COMPOSITE STRUCTURES (2020)
Effect of eccentric loading on the stability and load -carrying capacity of thin walled composite profiles with top -hat section
P. Rozylo et al.
COMPOSITE STRUCTURES (2020)
A virtual testing based search for optimum compression after impact strength in thin laminates using ply-thickness hybridization and unsymmetrical designs
A. Sasikumar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Stability and load-carrying capacity of short open-section composite columns under eccentric compression loading
H. Debski et al.
COMPOSITE STRUCTURES (2020)
Prediction of in situ strengths in composites: Some considerations
G. Catalanotti
COMPOSITE STRUCTURES (2019)
Mitigating the weak impact response of thin-ply based thin laminates through an unsymmetrical laminate design incorporating intermediate grade plies
A. Sasikumar et al.
COMPOSITE STRUCTURES (2019)
Transverse cracking in the bulk and at the free edge of thin-ply composites: Experiments and multiscale modelling
S. Kohler et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Effect of ply thickness and ply level hybridization on the compression after impact strength of thin laminates
A. Sasikumar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Experimental and three-dimensional numerical investigation of matrix cracking and delamination interaction with edge effect of curved composite laminates
Dongfeng Cao et al.
COMPOSITE STRUCTURES (2019)
Effect of Drilling-Induced Delamination on Buckling Behavior of Open Hole Composite Laminate Specimens Under Compressive Loading
Q. F. Duan et al.
STRENGTH OF MATERIALS (2019)
Effect of through thickness separation of fiber orientation on low velocity impact response of thin composite laminates
Ankush P. Sharma et al.
HELIYON (2019)
Computational investigation of both intra-laminar matrix cracking and inter-laminar delamination of curved composite components with cohesive elements
Dongfeng Cao et al.
COMPOSITE STRUCTURES (2018)
A strategy to improve the structural performance of non-crimp fabric thin-ply laminates
A. Arteiro et al.
COMPOSITE STRUCTURES (2018)
Low velocity impact and compression after impact simulation of thin ply laminates
A. Soto et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites
Gergely Czel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A 3D tomographic investigation to elucidate the low-velocity impact resistance, tolerance and damage sequence of thin non-crimp fabric laminates: effect of ply-thickness
S. M. Garcia-Rodriguez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Effects of stacking sequence and rotation angle of patch on low velocity impact performance of scarf repaired laminates
Xiaoquan Cheng et al.
COMPOSITES PART B-ENGINEERING (2018)
Progressive damage modeling and interface delamination of cross-ply laminates subjected to low-velocity impact
Sanan H. Khan et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2018)
Identification of failure modes of composite thin-ply laminates containing circular hole under tension by acoustic emission signals
Chunfang Huang et al.
COMPOSITE STRUCTURES (2018)
Tensile failure analysis and residual strength prediction of CFRP laminates with open hole
Mengli Xiao et al.
COMPOSITES PART B-ENGINEERING (2017)
Finite element modeling of damage development in cross-ply composite laminates subjected to low velocity impact
Chao Zhang et al.
COMPOSITE STRUCTURES (2017)
Selective ply-level hybridisation for improved notched response of composite laminates
C. Furtado et al.
COMPOSITE STRUCTURES (2016)
Using thin-plies to improve the damage resistance and tolerance of aeronautical CFRP composites
T. A. Sebaey et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Analytical modeling for stress distribution around interference fit holes on pinned composite plates under tensile load
Tao Wu et al.
COMPOSITES PART B-ENGINEERING (2016)
Local buckling and post-buckling of composite channel-section beams - Numerical and experimental investigations
Tomasz Kubiak et al.
COMPOSITES PART B-ENGINEERING (2016)
Thin ply composites: Experimental characterization and modeling of size-effects
R. Amacher et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Investigation on delamination morphology during drilling composite laminates
Haijin Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
A non-linear damage evolution model for mode II fatigue delamination onset and growth
G. Allegri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Material and structural response of polymer-matrix fibre-reinforced composites
S. T. Pinho et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Damage characterization in thin-ply composite laminates under out-of-plane transverse loadings
Tomohiro Yokozeki et al.
COMPOSITE STRUCTURES (2010)
Analysis of stress distribution around pin loaded holes in orthotropic plates
O. Aluko et al.
COMPOSITE STRUCTURES (2008)
Numerical prediction of delamination onset in carbon/epoxy composites drilling
L. M. P. Durao et al.
ENGINEERING FRACTURE MECHANICS (2008)
Experimental studies of thin-ply laminated composites
Sangwook Sihn et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
A damage model for the simulation of delamination in advanced composites under variable-mode loading
A. Turon et al.
MECHANICS OF MATERIALS (2006)
Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development
ST Pinho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Physically based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking. Part II: FE implementation
ST Pinho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear
PP Camanho et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)