☆ 4.7 Article

Predictive models for material properties of cold-formed conventional steels in the corner region

THIN-WALLED STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Mechanical behaviors and constitutive model of structural steel influenced by strain aging

Yiting Yang et al.

Summary: The effects of static strain aging on Q355B and Q460C low-alloy structural steel specimens were investigated, and more test data were obtained. Pre-strain had a greater effect than aging time, and a possible correlation was inferred between macro-mechanical properties and changes in microstructure. The constitutive models were updated based on the test data, and a revised version was established.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Structural behaviour of Q355 and Q460 press-braked rectangular hollow section stub columns

Haixin Liu et al.

Summary: Inspired by modular integrated construction, this paper presents a comprehensive investigation into press-braked rectangular hollow sections (RHSs). Material tests, residual stress measurements, stub column tests, and numerical studies were conducted to study various characteristics of press-braked RHSs. The study found that the strength enhancement of corner materials due to cold-working can be accurately captured by a predictive model, and a simplified residual stress pattern is proposed. Modified design approaches were also proposed to achieve more accurate and safe prediction of compressive resistance for press-braked RHSs.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2022)

Add to Collection

Article Nanoscience & Nanotechnology

In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel

Simon Vitzthum et al.

Summary: This study successfully separates the diffraction profiles of martensite and ferrite in dual-phase steels through microscopic in-situ analysis and evaluation methods. The origin of the elastic-plastic behavior of dual-phase steels is analyzed in relation to lattice strains and interphase stresses, and correlated with macro stress-strain relationship and thermoelastic effect. This provides a deeper understanding of the strain-dependent elastic-plastic behavior of dual-phase steels and has great potential to improve springback prediction.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Civil

Buckling behavior of closed built-up cold-formed steel columns under compression

Helder D. Craveiro et al.

Summary: This paper presents detailed experimental, numerical and analytical research on closed built-up cold-formed steel columns with different cross-section shapes. The study investigates the interaction between different components and the influence of connector spacing on load-bearing capacity. The suitability of design codes and reliability analysis are also evaluated.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Effect of manufacturing process on microstructures and mechanical properties, and design of cold-formed G450 steel channels

Cao Hung Pham et al.

Summary: This paper presents an experimental study on the effect of cold-forming process on the microstructure and mechanical properties of high strength G450 steel material, specifically focusing on flat and corner regions of C-shaped cold-formed channel sections. The study reveals that the design codes provide conservative predictions of the yield strengths at corner regions compared to experimental results, especially in thin sections. Therefore, a suggested modification of the design equations in the current specification is proposed to better predict the yield strengths at corner regions of high strength G450 steel cold-formed channels.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Tests of cold-formed steel built-up open section members under eccentric compressive load

Qiu-Yun Li et al.

Summary: An experimental study was conducted on cold-formed steel built-up open section members under eccentric compressive load. It was found that the existing design rules generally underestimate the strengths of these steel members through the axial load-moment interactive formulae specified in the current standards.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Stub column behaviour of heat-treated and galvanized RHS manufactured by different methods

Kamran Tayyebi et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Review Engineering, Manufacturing

Effect of constitutive model on springback prediction of MP980 and AA6022-T4

Jianping Lin et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)

Add to Collection

Article Engineering, Civil

Experimental assessment of the cyclic behaviour of concrete-filled steel tubular beam-columns with octagonal sections

Junbo Chen et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Cross-sectional capacity of octagonal tubular steel stub columns under uniaxial compression

Jiong-Yi Zhu et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Experimental assessment of the flexural behaviour of concrete-filled steel tubular beams with octagonal sections

Junbo Chen et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Experimental investigation of local-flexural interactive buckling of cold-formed steel channel columns

Jun Ye et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Engineering, Mechanical

Constitutive modeling for path-dependent behavior and its influence on twist springback

Juan Liao et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Construction & Building Technology

Testing and Analysis of Composite Cold-Formed Steel and Wood-Based Flooring Systems

Pinelopi Kyvelou et al.

JOURNAL OF STRUCTURAL ENGINEERING (2017)

Add to Collection

Article Engineering, Civil

Experimental investigation and a novel direct strength method for cold-formed built-up I-section columns

Yan Lu et al.

THIN-WALLED STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Testing and Analysis of Composite Cold-Formed Steel and Wood-Based Flooring Systems

Pinelopi Kyvelou et al.

JOURNAL OF STRUCTURAL ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Direct-formed and continuous-formed rectangular hollow sections - Comparison of static properties

Min Sun et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)

Add to Collection

Article Construction & Building Technology

Strength enhancements in cold-formed structural sections - Part I: Material testing

S. Afshan et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

Add to Collection

Article Construction & Building Technology

Strength enhancements in cold-formed structural sections - Part II: Predictive models

B. Rossi et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

Add to Collection

Article Engineering, Civil

Stability investigation of local buckling behavior of tubular polygon columns under concentric compression

Ahmed Godat et al.

THIN-WALLED STRUCTURES (2012)

Add to Collection

Article Engineering, Civil

Comparative experimental study of hot-rolled and cold-formed rectangular hollow sections

L. Gardner et al.

THIN-WALLED STRUCTURES (2010)

Add to Collection

Article Construction & Building Technology

Strength enhancements induced during cold forming of stainless steel sections

Rachel B. Cruise et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2008)

Add to Collection

Article Construction & Building Technology

Experimental study on compressive strengths of thick-walled cold-formed sections

Yao-Jie Guo et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2007)

Add to Collection

Article Construction & Building Technology

Strength enhancement of the corner regions of stainless steel cross-sections

M Ashraf et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2005)

Add to Collection

Article Construction & Building Technology

Tests and design of fixed-ended cold-formed steel plain angle columns

B Young

JOURNAL OF STRUCTURAL ENGINEERING (2004)

Add to Collection

Article Construction & Building Technology

Bending tests to determine slenderness limits for cold-formed circular hollow sections

M Elchalakani et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.