4.7 Article

Structural characteristics and wear, oxidation, hot corrosion behaviors of HVOF sprayed Cr3C2-NiCr hardmetal coatings

Related references

Note: Only part of the references are listed.
Article Materials Science, Coatings & Films

Isothermal oxidation and hot corrosion behavior of HVOF sprayed 80Ni-20Cr coatings at 750?C

Gulfem Binal

Summary: In this study, NiCr thermal spray coatings were deposited onto stainless steel substrates, and their oxidation and corrosion behaviors at high temperatures were assessed. The coatings showed good resistance to isothermal oxidation and hot corrosion, forming a corrosion product of Ni3V2O8 after reacting with the vanadate-sodium sulfate melt.

SURFACE & COATINGS TECHNOLOGY (2023)

Article Chemistry, Physical

Hydrophobicity of Cr3C2-NiCr coating under mechanical abrasion and thermal annealing

Dongliang Jin et al.

Summary: The study demonstrates that the Cr3C2-NiCr coating prepared by HVOF exhibits excellent hydrophobicity and mechanical wear resistance, with further enhancement of non-wettability achieved through surface modification using epoxy resin. The results suggest that these hydrophobic cermet coatings may have practical applications in harsh working conditions.

APPLIED SURFACE SCIENCE (2022)

Article

Review on Tribological and Mechanical Behavior in HVOF Thermal-sprayed Composite Coatings

D. G. Pradeep et al.

Journal of Bio- and Tribo-Corrosion (2022)

Article Materials Science, Multidisciplinary

Electrochemical study on the hot corrosion behavior of Ni16Cr13Co4Mo alloy in molten NaCl-KCl and NaCl-KCl-Na2SO4

J. H. Wang et al.

Summary: The hot corrosion behavior of a novel Ni16Cr13Co4Mo alloy in molten NaCl-KCl and NaClKCl-Na2SO4 was investigated. The overall corrosion process was controlled by diffusion, and the presence of Na2SO4 promoted the hot corrosion. The composition and properties of the corrosion layer differed in different molten salt environments.

CORROSION SCIENCE (2022)

Article Materials Science, Coatings & Films

Investigation of oxidation and hot corrosion behavior of molybdenum coatings produced by high-velocity oxy-fuel coating method

Yasin Ozgurluk

Summary: The study investigates the behavior of Mo coating on a 316L stainless steel substrate against high-temperature oxidation and hot corrosion, using High-Velocity Oxy-Fuel technique. Analysis of samples before and after oxidation and corrosion tests provide valuable insights for the research.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Coatings & Films

Investigation of vermiculite infiltration effect on microstructural properties of thermal barrier coatings (TBCs) produced by electron beam physical vapor deposition method (EB-PVD)

Okan Odabas et al.

Summary: Thermal barrier coatings (TBCs) are protective coating systems that are used to improve the thermal insulation and functional performance of gas turbine engines and other aircraft components. This study successfully developed TBCs on Inconel 718 superalloy by applying metallic bond coatings and ceramic topcoats. The coatings exhibited excellent protection and desirable microstructural and mechanical properties.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Coatings & Films

Thermally sprayed coatings for protection of integrated sensor systems on tribological loaded surfaces

Annett Dorner-Reisel et al.

Summary: The integration of piezo-elements in WC-NiCr and Cr3C2-NiCr thermally sprayed coatings produced electric voltage curves that can indicate wear and friction conditions. WC-NiCr coatings showed slightly higher electrical energy outcome under dry sliding, while Cr3C2-NiCr coatings demonstrated better wear resistance at higher temperatures.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Investigating load-dependent wear behavior and degradation mechanisms in Cr3C2-NiCr coatings deposited by HVAF and HVOF

Satyapal Mahade et al.

Summary: Wear resistant coatings that comply with non-toxic environment goals are highly desirable. The suitability of Cr3C2-NiCr coatings for automotive brake disc application was examined through dry sliding wear tests using different deposition processes. HVAF coatings demonstrated better wear resistance under harsh test conditions, while HVOF coatings performed better under mild wear test conditions. Detailed post-wear analysis was performed to reveal the degradation mechanisms at different test conditions, providing new insights for depositing wear-resistant coatings.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Materials Science, Multidisciplinary

Hot corrosion behavior of HVOF-sprayed carbide based composite coatings for boiler steel in Na2SO4-60 % V2O5 environment at 900 °C under cyclic conditions

Gurmail Singh et al.

Summary: In this study, the hot corrosion behavior of HVOF sprayed coatings NiCrAlY-SiC and NiCrAlY-B4C on T22 steel was investigated in a molten-salt environment. It was found that NiCrAlY-SiC coatings exhibited better hot corrosion resistance compared to NiCrAlY-B4C coatings. Uncoated T22 steel suffered accelerated corrosion due to the formation of unstable phases.

CORROSION SCIENCE (2021)

Article Materials Science, Coatings & Films

Tribocorrosion behavior of boronized Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high entropy alloy

Ali Gunen

Summary: Boride layers were successfully grown on the Co1.19Cr1.86Fe1.30Mn1.39Ni1.05Al0.17B0.04 high-entropy alloy at different temperatures using nanosized boronizing powders. The boronized alloys exhibited improved friction and wear resistance compared to the untreated alloy, with enhanced properties attributed to the formation of complex metal boride layers on the surface.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Properties and High Temperature Dry Sliding Wear Behavior of Boronized Inconel 718

Ali Gunen

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Article Materials Science, Ceramics

High velocity oxygen fuel sprayed Cr3C2-NiCr coatings against Na2SO4 hot corrosion at different temperatures

Mengchuan Shi et al.

CERAMICS INTERNATIONAL (2020)

Review Materials Science, Coatings & Films

A Comprehensive Review of Corrosion Resistance of Thermally-Sprayed and Thermally-Diffused Protective Coatings on Steel Structures

Sahar A. Galedari et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Crack Propagation and Effect of Mixed Oxides on TGO Growth in Thick La-Gd-YSZ Thermal Barrier Coating

Savisha Mahalingam et al.

COATINGS (2019)

Article Materials Science, Multidisciplinary

Hot corrosion studies of HVOF sprayed carbide and metallic powder coatings on alloy 80A at 900 °C

V Sreenivasulu et al.

MATERIALS RESEARCH EXPRESS (2019)

Article Engineering, Mechanical

Hot Corrosion Studies of Plasma-Sprayed Chromium Oxide Coatings on Boiler Tube Steel at 850 °C in Simulated Boiler Environment

Gurjot Singh et al.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING (2018)

Article Materials Science, Coatings & Films

Effect of temperature and ceramic bonding on BC oxidation behavior in plasma-sprayed thermal barrier coatings

Kaveh Torkashvand et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Materials Science, Coatings & Films

Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition

Leo Janka et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Oxidation Behavior of NiCr/YSZ Thermal Barrier Coatings (TBCs)

Kadir Mert Doleker et al.

OPEN CHEMISTRY (2018)

Article Materials Science, Coatings & Films

Effect of Particle Morphology on Cold Spray Deposition of Chromium Carbide-Nickel Chromium Cermet Powders

Ruben Fernandez et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

Article Materials Science, Coatings & Films

Isothermal oxidation behavior of HVAF-sprayed Ni and NiCr coatings in H2-H2O environment

E. Sadeghimeresht et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Coatings & Films

Isothermal oxidation behavior and kinetics of thermal barrier coatings produced by cold gas dynamic spray technique

Abdullah Cahit Karaoglanli et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Engineering, Mechanical

Comparative wear study of plasma sprayed TiO2 and Al2O3-TiO2 on mild steels

M. J. Ghazali et al.

TRIBOLOGY INTERNATIONAL (2016)

Article Materials Science, Multidisciplinary

A comparative study of plasma sprayed TiB2-NiCr and Cr3C2-NiCr composite coatings

Haibo Wang et al.

MATERIALS LETTERS (2015)

Article Materials Science, Coatings & Films

Evaluation of Ceria-Added Cr3C2-25(NiCr) Coating on Three Superalloys under Simulated Incinerator Environment

Deepa Mudgal et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)

Article Materials Science, Multidisciplinary

High temperature erosion-oxidation of Cr3C2-NiCr thermal spray coatings under simulated turbine conditions

S. Matthews et al.

CORROSION SCIENCE (2013)

Article Materials Science, Multidisciplinary

High-Temperature Behavior of a High-Velocity Oxy-Fuel Sprayed Cr3C2-NiCr Coating

Manpreet Kaur et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Article Materials Science, Coatings & Films

The effects of post-treatment on the hot corrosion behavior of the HVOF-sprayed Cr3C2-NiCr coating

Sukhpal Singh Chatha et al.

SURFACE & COATINGS TECHNOLOGY (2012)

Article Materials Science, Coatings & Films

High-Temperature Corrosion Studies of HVOF-Sprayed Cr3C2-NiCr Coating on SAE-347H Boiler Steel

Manpreet Kaur et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)

Article Materials Science, Coatings & Films

Characterizations and hot corrosion resistance of Cr3C2-NiCr coating on Ni-base superalloys in an aggressive environment

T. S. Sidhu et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2006)

Review Materials Science, Multidisciplinary

Studies on the properties of high-velocity oxy-fuel thermal spray coatings for higher temperature applications

T. S. Sidhu et al.

MATERIALS SCIENCE (2005)

Article Materials Science, Coatings & Films

Independent control of HVOF particle velocity and temperature

TC Hanson et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2002)