4.7 Article

Scalable fabrication of superhydrophobic armor microstructure arrays with enhanced tribocorrosion performance via maskless electrochemical machining

Related references

Note: Only part of the references are listed.
Article Engineering, Manufacturing

Underwater gas self-transportation along femtosecond laser-written open superhydrophobic surface microchannels (<100 μm) for bubble/gas manipulation

Jiale Yong et al.

Summary: In this study, we report a method to achieve self-transportation of gas in water through laser-induced superhydrophobic microchannels. This technique has potential applications in manipulating gas at the microscopic level.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2022)

Article Engineering, Mechanical

Facile Design and Realization of Extremely Water-Repellent Surface by Mimicking the Greta oto's Wings

Sung Ho Lee et al.

Summary: This paper reports a functional surface inspired by the Greta oto wing (GWFS) and investigates its wettability properties through various experiments. Results show that GWFS exhibits superhydrophobic surface, low sliding angle, and non-wetting surface characteristics, and it also demonstrates efficient self-cleaning performance. Furthermore, an advanced quadcopter system using GWFS is proposed.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Article Engineering, Chemical

Three-dimensional biomimetic superhydrophobic nickel sponge without chemical modifications for efficient oil/water separation

Ru Song et al.

Summary: This study introduces the use of three-dimensional nickel sponges for oil-water separation, featuring superhydrophobic/superlipophilic properties and excellent adsorption capacity for various oils and organic solvents. The nickel sponges also exhibit UV resistance and corrosive aqueous solution ability.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Fabrication and droplet impact performance of superhydrophobic Ti6Al4V surface by laser induced plasma micro-machining

Zhen Zhang et al.

Summary: In this study, a laser-induced plasma micromachining technique was used to fabricate a super-hydrophobic surface with a micro-nano hierarchical structure on a titanium alloy. Experimental and simulation results showed that as the contact angle increases, the spreading diameter decreases and the rebound height increases.

APPLIED SURFACE SCIENCE (2022)

Review Chemistry, Multidisciplinary

Robust and durable liquid-repellent surfaces

Faze Chen et al.

Summary: Liquid-repellent surfaces have great potential applications but their poor robustness and durability hinder their real-world use. This review summarizes the recent progress made towards robust and durable liquid-repellent surfaces, including their design, fabrication, evaluation methods, and applications in various fields.

CHEMICAL SOCIETY REVIEWS (2022)

Article Engineering, Aerospace

Electrochemical machining on blisk channels with a variable feed rate mode

Jing Wang et al.

Summary: Electrochemical machining (ECM) method with variable feed rate is developed to improve the uniformity of allowance distribution in channel machining, reducing allowance differences effectively. Experimental results demonstrate the feasibility and efficiency of this method in blisk manufacturing.

CHINESE JOURNAL OF AERONAUTICS (2021)

Article Engineering, Mechanical

Ellipsoidal drop impact on a single-ridge superhydrophobic surface

Sungchan Yun

Summary: The study altered the residence time of water drops on a superhydrophobic surface, demonstrating that using ellipsoidal drops and asymmetric bouncing can reduce the residence time by approximately 55%, providing insights for the development of self-cleaning and anti-icing technologies.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Engineering, Industrial

Intentionally-induced dynamic gas film enhances the precision of electrochemical micromachining

Shunda Zhan et al.

Summary: A novel gas-assisted electrochemical micromachining (GA-ECM) method is proposed in this study to enhance ECM precision by utilizing a gas shielding tool electrode. The method is proven to effectively suppress stray machining and improve machining accuracy through simulations and experiments.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Large-area fabrication of superhydrophobic micro-conical pillar arrays on various metallic substrates

Weihao Pan et al.

Summary: A nanosecond laser ablation technology with versatility and high processing efficiency was developed to fabricate large-area superhydrophobic micro-conical pillar arrays, where the height and the pillar inclination angle can be easily controlled. The fabricated arrays not only show good mechanical robustness and chemical stability but also have potential application prospects in anti-icing.

NANOSCALE (2021)

Review Chemistry, Multidisciplinary

Robust superhydrophobicity: mechanisms and strategies

Wenluan Zhang et al.

Summary: Superhydrophobic surfaces with water repellence have great potential for diverse applications, but the vulnerability of surface textures limits their practical use. Significant progress has been made in elucidating wetting transitions, design strategies, and fabrication techniques for superhydrophobic surfaces in recent years.

CHEMICAL SOCIETY REVIEWS (2021)

Article Engineering, Mechanical

Dependence of wettability of microtextured wall on the heat and mass transfer: Simple estimates for convection and heat transfer

S. Y. Misyura

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Engineering, Manufacturing

Investigation into the blade-formation process in electrochemical trepanning of diffusers

Zhu Dong et al.

MACHINING SCIENCE AND TECHNOLOGY (2020)

Article Multidisciplinary Sciences

Design of robust superhydrophobic surfaces

Dehui Wang et al.

NATURE (2020)

Review Engineering, Manufacturing

Bioinspired micro/nanostructured surfaces prepared by femtosecond laser direct writing for multi-functional applications

Yiyuan Zhang et al.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)

Review Chemistry, Multidisciplinary

Flourishing Bioinspired Antifogging Materials with Superwettability: Progresses and Challenges

Zhiwu Han et al.

ADVANCED MATERIALS (2018)

Review Materials Science, Multidisciplinary

Modeling tribocorrosion of passive metals - A review

Shoufan Cao et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2018)

Review Materials Science, Coatings & Films

Application of superhydrophobic coatings as a corrosion barrier: A review

E. Vazirinasab et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Engineering, Mechanical

Tribocorrosion behaviour of Ti6A14V in artificial seawater at low contact pressures

Vladimir Pejakovic et al.

TRIBOLOGY INTERNATIONAL (2018)

Review Chemistry, Multidisciplinary

Control of ice nucleation: freezing and antifreeze strategies

Zhisen Zhang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Engineering, Mechanical

Fabrication of Superhydrophobic Micro Post Array on Aluminum Substrates Using Mask Electrochemical Machining

Jing Sun et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2018)

Review Nanoscience & Nanotechnology

Nanoengineered materials for liquid-vapour phase-change heat transfer

H. Jeremy Cho et al.

NATURE REVIEWS MATERIALS (2017)

Review Nanoscience & Nanotechnology

Nature-inspired superwettability systems

Mingjie Liu et al.

NATURE REVIEWS MATERIALS (2017)

Article Nanoscience & Nanotechnology

Rough Structure of Electrodeposition as a Template for an Ultrarobust Self-Cleaning Surface

Yongquan Qing et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Facile Design and Fabrication of Superwetting Surfaces with Excellent Wear-Resistance

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Engineering, Mechanical

Superhydrophobic drag reduction in laminar flows: a critical review

Choongyeop Lee et al.

EXPERIMENTS IN FLUIDS (2016)

Article Materials Science, Coatings & Films

Superhydrophobic surface prepared by micromilling and grinding on aluminium alloy

H. -D. Yu et al.

SURFACE ENGINEERING (2016)

Review Nanoscience & Nanotechnology

Design of anti-icing surfaces: smooth, textured or slippery?

Michael J. Kreder et al.

NATURE REVIEWS MATERIALS (2016)

Article Engineering, Chemical

Automated and Continuous Production of Microstructured Metallic Plates via Cold Embossing

Ole Wiborg et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2015)

Article Physics, Applied

Multifunctional surfaces produced by femtosecond laser pulses

A. Y. Vorobyev et al.

JOURNAL OF APPLIED PHYSICS (2015)

Article Multidisciplinary Sciences

Robust self-cleaning surfaces that function when exposed to either air or oil

Yao Lu et al.

SCIENCE (2015)

Review Materials Science, Multidisciplinary

Recent progress in antireflection and self-cleaning technology - From surface engineering to functional surfaces

Lin Yao et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Article Nanoscience & Nanotechnology

One-Step Process for Superhydrophobic Metallic Surfaces by Wire Electrical Discharge Machining

Won Gyu Bae et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Article Multidisciplinary Sciences

Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating

Xu Deng et al.

SCIENCE (2012)

Review Materials Science, Multidisciplinary

Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction

Bharat Bhushan et al.

PROGRESS IN MATERIALS SCIENCE (2011)

Article Chemistry, Multidisciplinary

The Salvinia Paradox: Superhydrophobic Surfaces with Hydrophilic Pins for Air Retention Under Water

Wilhelm Barthlott et al.

ADVANCED MATERIALS (2010)