☆ 4.2 Review

Material Testing 2.0: A brief review

STRAIN (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Phase distribution and properties identification of heterogeneous materials: A data-driven approach

Gabriel Valdes-Alonzo et al.

Summary: This paper presents a new methodology to extend the Data-Driven Identification (DDI) to heterogeneous samples made of multiple elastic materials. By using the Correspondence Analysis (CA) technique to post-process DDI, the study is able to identify representative material databases for each phase and localize the different phases in the sample. It shows that the method is effective for estimating stresses and identifying different phases in the sample, and it can be improved by iterating between DDI and CA when input data is limited.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Extracting material parameters of silicone elastomers under biaxial tensile tests using virtual fields method and investigating the effect of missing deformation data close to specimen edges on parameter identification

Mingliang Jiang et al.

Summary: In this study, the virtual fields method (VFM) was used to extract constitutive parameters of silicone elastomers under equi-biaxial and general biaxial tests. It was found that the negative effects of missing data and noise introduced by digital image correlation (DIC) can be mitigated by properly scaling the load applied to the specimen boundary and extracting parameters through the least square method based on deformation fields of all loading steps.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2022)

Add to Collection

Review Materials Science, Characterization & Testing

Towards Material Testing 2.0. A review of test design for identification of constitutive parameters from full-field measurements

F. Pierron et al.

Summary: This paper reviews the research on the design and optimization of heterogeneous mechanical tests for identifying material parameters from full-field measurements, termed Material Testing 2.0 (MT2.0).

STRAIN (2021)

Add to Collection

Article Engineering, Multidisciplinary

Identifying the coefficients of thermal expansion of an electronic device composed of various materials using the virtual fields method

Y. Kanai et al.

Summary: The method proposed in this study utilizes virtual fields method and digital image correlation to accurately determine the coefficients of thermal expansion of electronic devices composed of different materials, demonstrating its effectiveness in practical sample testing and applicability to simulated electronic device samples under different boundary constraints.

MEASUREMENT SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of dynamic hardening behavior at intermediate strain rates using the virtual fields method

Jin-Seong Park et al.

Summary: The research aims to determine stress-strain curves of sheet metals at various strain rates from a single dynamic experiment. A new high-speed tensile tester was built, and full-field heterogeneous strain fields were measured using digital image correlation technique. Stress-strain curves of three advanced high strength steels at intermediate strain rates were successfully obtained from a single experiment through an inverse identification scheme with a rate dependent hardening law.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid fitting-numerical method for determining strain-hardening behavior of sheet metals

Quoc Tuan Pham et al.

Summary: This study proposes a hybrid method combining curve-fitting and inverse finite element analysis to identify the parameters of the Kim-Tuan hardening model over large strain ranges. By calibrating the hardening laws, the stress-strain relationship of sheet metals can be effectively captured.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Large strain flow curve identification for sheet metals under complex stress states

Chong Zhang et al.

Summary: The study investigated experimental methods to characterize strain hardening behaviors up to large deformation under different stress states for an aluminum alloy sheet, revealing the effectiveness of the inverse engineering approach in characterizing stress-strain curves up to large plastic deformation. The results also highlight the need to develop advanced yield functions to model yielding and hardening behaviors under complex stress states.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

A fast methodology for the accurate characterization and simulation of laser heat treated blanks

Attilio Lattanzi et al.

Summary: A new methodology for material characterization of locally heat treated blanks was proposed in this study. Through simulation and experiments, the methodology was proven to accurately predict the deformation behavior of the material.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Full-field stress computation from measured deformation fields: A hyperbolic formulation

Benjamin C. Cameron et al.

Summary: Recent advancements in imaging techniques and correlation algorithms have enabled accurate measurement of strain fields and computation of stress fields on deforming materials, known as inverse problems. While current approaches face challenges and resort to statistical methods, a deterministic solution has been proposed and validated across various material categories.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

Add to Collection

Article Materials Science, Characterization & Testing

High strain rate elasto-plasticity identification using the image-based inertial impact (IBII) test part 1: Error quantification

Lloyd Fletcher et al.

Summary: The assumption of quasi-static equilibrium is crucial for obtaining accurate data in split Hopkinson bar testing. Image-based inertial impact (IBII) testing has emerged as an alternative that does not require this assumption, utilizing virtual fields for material property identification. The aim of the study is to develop the IBII method for identifying elasto-plasticity in metals.

STRAIN (2021)

Add to Collection

Article Materials Science, Characterization & Testing

High strain rate elasto-plasticity identification using the image-based inertial impact (IBII) test part 2: Experimental validation

Lloyd Fletcher et al.

Summary: This study developed a new high strain rate testing method using the IBII technique to accurately identify the transition from elasticity to plasticity in metals. Experimental validation showed that the method performed well for materials with different rate sensitivities.

STRAIN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Application of Imaging Techniques to Determine the Post-Yield Behaviour of the Heterogeneous Microstructure of Friction Stir Welds

S. Ramachandran et al.

Summary: This study successfully determined the relationship between the local microstructure and mechanical behavior of different microstructural regions in Friction Stir Welding (FSW) using SEM, HR-DIC, and CT, identifying tungsten deposits in the weld nugget, greater yield strength in the stir zone material, and greater ductility in the retreating side compared to the advancing side.

EXPERIMENTAL MECHANICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Virtual Field Characterization for Ratcheting Effect Under Cyclic Loading

H. Jiang et al.

Summary: This study proposes a nonlinear virtual field method for characterizing ratcheting effect and identifying kinematic constitutive from field measurement data. The algorithm shows good adaptability to data density and noise amplitude, effectively operating under complex working conditions of non-uniform deformation.

EXPERIMENTAL MECHANICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A method for identifying the boundary of regions in welded coupon specimens using digital image correlation

Rui Yan et al.

Summary: This study proposes a method for determining the boundary of regions based on hardness and microstructure investigation, and identifying the boundary in DIC results, in order to establish stress-strain relationships for Finite Element Analysis of welded joints.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Mechanical

Calibration of a modified Johnson-Cook model using the Virtual Fields Method and a heterogeneous thermo-mechanical tensile test

J. M. P. Martins et al.

Summary: A novel calibration methodology that combines the Virtual Fields Method and a thermo-mechanical heterogeneous test is proposed, showing potential to simplify the calibration process of thermo-elasto-viscoplastic constitutive models. By conducting three tests at different nominal strain rates and combining the results, accurate predictions of flow stress and strain rate sensitivity of materials can be achieved with this method.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Mechanics

Nonuniform Stress Field Determination Based on Deformation Measurement

C. Liu

Summary: This study demonstrates a technique to determine stresses associated with nonuniform deformation fields without detailed knowledge of constitutive behavior. By measuring deformation and stress, the technique successfully determines stress orientation for isotropic materials. Validation through virtual cases and application in an experimental case showcase the effectiveness of this technique.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Characterising the frequency-response of ultra-soft polymers with the Virtual Fields Method

Aaron Graham et al.

Summary: This paper introduces a novel apparatus combined with Virtual Fields Method (VFM) for high frequency characterization of mechanical response of ultra-soft materials. The low speed of sound and stiffness in the material make obtaining high rate data challenging using typical test methodologies, but this new apparatus and analysis method have shown to be capable of obtaining important material characterization data.

STRAIN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Inertia-based identification of elastic anisotropic properties for materials undergoing dynamic loadings using the virtual fields method and heterogeneous impact tests

Jiawei Fu et al.

Summary: A novel inverse identification strategy based on the dynamic virtual fields method is proposed for characterizing material anisotropic properties at high strain rates. This method enables simultaneous identification of anisotropic constitutive parameters by utilizing heterogeneous strain and acceleration data. The identification accuracy is highly dependent on the heterogeneity of stress/strain distributions and can be improved using a minimization algorithm on multiple time steps.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Multidisciplinary

Unsupervised discovery of interpretable hyperelastic constitutive laws

Moritz Flaschel et al.

Summary: The proposed method allows for unsupervised discovery of isotropic hyperelastic constitutive laws, delivering interpretable models through sparse regression and automatically determining penalty parameters in the regularization term.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Mechanics

An extended linear method to evaluate the viscoplastic behavior of boron steel at large strain with full-field measurements

Yongfeng Li et al.

Summary: This paper introduces an extended LSSCI method to accurately identify the viscoplastic behavior of boron steel under large strain conditions, and validates its accuracy and reliability through numerical and experimental cases. Additionally, a unified viscoplastic (UVP) model based on dislocation density evolution is proposed for describing the viscoplastic behavior of Boron steel at large strain.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Inference of deformation mechanisms and constitutive response of soft material surrogates of biological tissue by full-field characterization and data-driven variational system identification

Z. Wang et al.

Summary: This study introduces an innovative three-dimensional approach to characterize and model soft materials, particularly soft biological tissues. By using MRI for mechanical loading experiments and data-driven computation, the complete deformation tensor field of specimens can be obtained, allowing for characterization through a reduced number of deformation states. The combination of MRI-u with inverse modeling methods enables the inference of physically best-suited and parsimonious mathematical models for the mechanical response of soft polymers, which can serve as surrogate models for soft biological tissues.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of heat-resistant grids and their application to deformation measurements using a sampling moire method

Yangyang Li et al.

Summary: A heat-resistant grids fabrication technique using a laser-marking technique was proposed for high temperature deformation measurements, successfully achieving grids with high temperature resistance. Introduction of an image grayscale-averaging technique improved measurement accuracy of high-temperature deformation fields, confirming feasibility in characterizing thermomechanical parameters of materials.

MEASUREMENT SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Determination of local constitutive properties in similar and dissimilar friction stir welded joints from DIC based surface strain measurement in two mutually perpendicular surfaces

Harish Suthar et al.

Summary: The study evaluated the local constitutive properties of similar and dissimilar friction stir weld joints of AA6061-T6 and AA7075-T6 using a modified non-uniform stress method (nUSM), showing good agreement between the properties. The accuracy of the modified nUSM was affected by less deformation in certain areas of the AA7075-AA7075 FSW joint, and the nUSM was unable to evaluate local constitutive properties in the elastic portion of the dissimilar joint.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Incremental forming of friction-stir welded aluminium blanks: an integrated approach

P. Carlone et al.

Summary: This study investigates the influence of friction stir welding parameters on the formability of aluminium alloy 6082-T6 blanks during incremental forming. The results show that a high feed rate leads to significantly reduced formability. Additionally, local mechanical properties and stress mismatch between different zones were found to have a similar trend as formability levels.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The Off-Axis IBII Test for Composites

S. Parry et al.

Summary: A new Image-Based Inertial Impact (IBII) test methodology was developed to accurately determine the mechanical properties of composite materials under high strain rate conditions. Results from different sample configurations were consistent, validating the method's reliability.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Image-Based Inertial Impact Test for Characterisation of Strain Rate Dependency of Ti6Al4V Titanium Alloy

T. Fourest et al.

EXPERIMENTAL MECHANICS (2020)

Add to Collection

Article Mechanics

Optimal procedure for the identification of constitutive parameters from experimentally measured displacement fields

Stephane Roux et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The Image-Based Inertial Release (IBIR) Test: A New High Strain Rate Test for Stiffness Strain-Rate Sensitivity Identification

L. Fletcher et al.

EXPERIMENTAL MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Towards Criteria Characterizing the Metrological Performance of Full-field Measurement Techniques Application to the Comparison Between Local and Global Versions of DIC

B. Blaysat et al.

EXPERIMENTAL MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental Validation of the Sensitivity-Based Virtual Fields for Identification of Anisotropic Plasticity Models

A. Marek et al.

EXPERIMENTAL MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Optimisation based material parameter identification using full field displacement and temperature measurements

Lars Rose et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

Sylvain Charles et al.

STRAIN (2020)

Add to Collection

Article Engineering, Mechanical

Inverse identification strategies for the characterization of transformation-based anisotropic plasticity models with the non-linear VFM

Attilio Lattanzi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Acoustics

A method for the observation of the anelastic behaviour of anisotropic porous materials using digital image correlation

Luca Manzari et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Add to Collection

Article Engineering, Multidisciplinary

A virtual fields method for identifying anisotropic elastic constants of fiber reinforced composites using a single tension test: Theory and validation

Chanyang Kim et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

A method for the simultaneous identification of anisotropic yield and hardening constitutive parameters for sheet metal forming

Jiawei Fu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Determination of local true stress-strain response of X80 and Q235 girth-welded joints based on digital image correlation and numerical simulation

Xu Wu et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2020)

Add to Collection

Article Mechanics

Plastic instability and fracture of ultra-thin stainless-steel sheet

Peng Zhang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Optics

Identifying elasto-plastic damage coupling model of laser-welded aluminum alloy by virtual field method and digital image correlation

Hao Jiang et al.

OPTICS AND LASER TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Image-Based Inertial Impact (IBII) Tests for Measuring the Interlaminar Shear Moduli of Composites

J. Van Blitterswyk et al.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Investigation of assumptions and approximations in the virtual fields method for a viscoplastic material model

Elizabeth M. C. Jones et al.

STRAIN (2019)

Add to Collection

Article Mechanics

Calibration of anisotropic plasticity models using a biaxial test and the virtual fields method

J. M. P. Martins et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A computational approach to design new tests for viscoplasticity characterization at high strain-rates

Pascal Bouda et al.

COMPUTATIONAL MECHANICS (2019)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Non-parametric material state field extraction from full field measurements

Adrien Leygue et al.

COMPUTATIONAL MECHANICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Measurement of Interlaminar Tensile Strength and Elastic Properties of Composites Using Open-Hole Compression Testing and Digital Image Correlation

Guillaume Seon et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Engineering, Manufacturing

Extension of the sensitivity-based virtual fields to large deformation anisotropic plasticity

Aleksander Marek et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Measuring stress field without constitutive equation

Marie Dalemat et al.

MECHANICS OF MATERIALS (2019)

Add to Collection

Article Engineering, Mechanical

Assessment of Optimization Methods Used to Determine Plasticity Parameters Based on DIC and back Calculation Methods

L. Kowalewski et al.

EXPERIMENTAL TECHNIQUES (2019)

Add to Collection

Article Engineering, Mechanical

Strength Characteristics of Heat-Affected Zones in Welded Aluminum Connections

Navid Nazemi et al.

JOURNAL OF ENGINEERING MECHANICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of 7B04 aluminum alloy anisotropy yield criteria with conventional test and Pottier test at elevated temperature

Zhihao Wang et al.

RESULTS IN PHYSICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A Novel Image-Based Inertial Impact Test (IBII) for the Transverse Properties of Composites at High Strain Rates

L. Fletcher et al.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A Novel Image-based Ultrasonic Test to Map Material Mechanical Properties at High Strain-rates

R. Seghir et al.

EXPERIMENTAL MECHANICS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Computational measurements of stress fields from digital images

Julien Rethore et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2018)

Add to Collection

Article Mechanics

Uncertainty analysis in composite material properties characterization using digital image correlation and finite element model updating

Tiren He et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Parameter covariance and non-uniqueness in material model calibration using the Virtual Fields Method

E. M. C. Jones et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Multidisciplinary

Data-based derivation of material response

Adrien Leygue et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of Heterogeneous Elastoplastic Behaviors Using the Constitutive Equation Gap Method

T. Madani et al.

EXPERIMENTAL MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

A Practical Procedure for Measuring the Stiffness of Foam like Materials

A. D. Marter et al.

EXPERIMENTAL TECHNIQUES (2018)

Add to Collection

Article Engineering, Mechanical

Comparison of inverse identification strategies for constitutive mechanical models using full-field measurements

J. M. P. Martins et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

On the identification of earlywood and latewood radial elastic modulus of Pinus pinaster by digital image correlation: A parametric analysis

Joao Luis Pereira et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Application of the Virtual Fields Method to a relaxation behaviour of rubbers

Sung-ho Yoon et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Optics

Virtual field method for identifying elastic-plastic constitutive parameters of aluminum alloy laser welding considering kinematic hardening

Ruixiang Bai et al.

OPTICS AND LASERS IN ENGINEERING (2018)

Add to Collection

Article Materials Science, Characterization & Testing

A general linear method to evaluate the hardening behaviour of metals at large strain with full-field measurements

M. Rossi et al.

STRAIN (2018)

Add to Collection

Article Engineering, Mechanical

Measuring orthotropic bending stiffness components of Pinus pinaster by the virtual fields method

Jose Xavier et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2018)

Add to Collection

Article Materials Science, Multidisciplinary

An Image-Based Inertial Impact (IBII) Test for Tungsten Carbide Cermets

L. Fletcher et al.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Image-Based Inertial Impact Test for Composite Interlaminar Tensile Properties

J. Van Blitterswyk et al.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

On the Processing of Spalling Experiments. Part I: Identification of the Dynamic Tensile Strength of Concrete

P. Forquin et al.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

On the Processing of Spalling Experiments. Part II: Identification of Concrete Fracture Energy in Dynamic Tension

Bratislav B. Lukic et al.

JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2018)

Add to Collection

Article Biophysics

Verification of a virtual fields method to extract the mechanical properties of human optic nerve head tissues in vivo

Liang Zhang et al.

BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-Parameter Inversion and Thermo-Mechanical Deformation Decoupling using I-DIC

J. Dong et al.

EXPERIMENTAL MECHANICS (2017)

Add to Collection

Article Engineering, Mechanical

Analysis of dynamic bending test using ultra high speed DIC and the virtual fields method

Behrad Koohbor et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

Add to Collection

Article Optics

Determining the tensile response of materials at high temperature using DIC and the Virtual Fields Method

Guillermo Valeri et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection

Article Materials Science, Characterization & Testing

Smoothly varying in-plane stiffness heterogeneity evaluated under uniaxial tensile stress

J. M. Considine et al.

STRAIN (2017)

Add to Collection

Article Materials Science, Characterization & Testing

On the identifiability of Hill-1948 plasticity model with a single biaxial test on very thin sheet

Morgan Bertin et al.

STRAIN (2017)

Add to Collection

Article Mechanics

On the identifiability of the Hill-1948 model with one uniaxial tensile test

Morgan Bertin et al.

COMPTES RENDUS MECANIQUE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

High Strain-Rate Tensile Characterization of EPDM Rubber Using Non-equilibrium Loading and the Virtual Fields Method

S. -h. Yoon et al.

EXPERIMENTAL MECHANICS (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Optimised Experimental Characterisation of Polymeric Foam Material Using DIC and the Virtual Fields Method

P. Wang et al.

STRAIN (2016)

Add to Collection

Article Mechanics

Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification: Analysis of biaxial tests

Zvonimir Tomicevic et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Experimental identification of the overall elastic rigidities of superconducting windings

Rene Rotinat et al.

INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS (2016)

Add to Collection

Article Engineering, Mechanical

Effect of specimen size, compressibility and inertia on the response of rigid polymer foams subjected to high velocity direct impact loading

Behrad Koohbor et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

Add to Collection

Article Engineering, Mechanical

Investigation of the dynamic stress-strain response of compressible polymeric foam using a non-parametric analysis

Behrad Koohbor et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

Add to Collection

Article Mechanics

Application of the virtual fields method to large strain anisotropic plasticity

Marco Rossi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)

Add to Collection

Article Engineering, Mechanical

Anisotropic yield surface identification of sheet metal through stereo finite element model updating

Yueqi Wang et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2016)

Add to Collection

Article Engineering, Mechanical

Integrated digital image correlation applied to elastoplastic identification in a biaxial experiment

Morgan Bertin et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-DIC setup for the identification of a 3D anisotropic yield surface of thick high strength steel using a double perforated specimen

K. Denys et al.

MECHANICS OF MATERIALS (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Optimization of a Cruciform Specimen Geometry for the Identification of Constitutive Parameters Based Upon Full-Field Measurements

M. B. R. Bertin et al.

STRAIN (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Addendum to 'Characterising the Strain and Temperature Fields in a Surrogate Bone Material Subject to Power Ultrasonic Excitation'

F. Pierron

STRAIN (2016)

Add to Collection

Review Materials Science, Characterization & Testing

The Grid Method for In-plane Displacement and Strain Measurement: A Review and Analysis

M. Grediac et al.

STRAIN (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Inverse Strategies for Identifying the Parameters of Constitutive Laws of Metal Sheets

P. A. Prates et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A procedure for specimen optimization applied to material testing in plasticity with the virtual fields method

Marco Rossi et al.

PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) (2016)

Add to Collection

Article Materials Science, Multidisciplinary

On the identifiability of Anand visco-plastic model parameters using the Virtual Fields Method

S. N. Gram et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Engineering, Mechanical

Identification of the elastic stiffness of composites using the virtual fields method and digital image correlation

Lebin Jiang et al.

ACTA MECHANICA SINICA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Impact of Experimental Uncertainties on the Identification of Mechanical Material Properties using DIC

Michele Badaloni et al.

EXPERIMENTAL MECHANICS (2015)

Add to Collection

Article Engineering, Mechanical

Identification of sheet metal hardening for large strains with an in-plane biaxial tensile test and a dedicated cross specimen

Wei Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Add to Collection

Article Mechanics

Identification of a set of macroscopic elastic parameters in a 3D woven composite: Uncertainty analysis and regularization

R. Gras et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Mechanics

An innovative procedure for characterising a coupled elastoplastic damage model of behaviour using the Virtual Fields Method

D. Notta-Cuvier et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Mechanics

Application of the Virtual Fields Method to the uniaxial behavior of rubbers at medium strain rates

Sung-ho Yoon et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Acoustics

Practical implementation of the corrected force analysis technique to identify the structural parameter and load distributions

Quentin Leclere et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Add to Collection

Article Optics

Local zone wise elastic and plastic properties of electron beam welded Ti-6Al-4V alloy using digital image correlation technique: A comparative study between uniform stress and virtual fields method

K. M. Saranath et al.

OPTICS AND LASERS IN ENGINEERING (2015)

Add to Collection

Article Materials Science, Characterization & Testing

The deformation and failure response of closed-cell PMDI foams subjected to dynamic impact loading

Behrad Koohbor et al.

POLYMER TESTING (2015)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of DIC Spatial Resolution, Noise and Interpolation Error on Identification Results with the VFM

M. Rossi et al.

STRAIN (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC

F. Mathieu et al.

EXPERIMENTAL MECHANICS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Visco-Hyper-Pseudo-Elastic Characterization of a Fluoro-Silicone Rubber

M. Sasso et al.

EXPERIMENTAL MECHANICS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

General Anisotropy Identification of Paperboard with Virtual Fields Method

J. M. Considine et al.

EXPERIMENTAL MECHANICS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Determination of Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method

J. -H. Kim et al.

EXPERIMENTAL MECHANICS (2014)

Add to Collection

Article Engineering, Mechanical

Calibration of anisotropic yield criterion with conventional tests or biaxial testl

Shunying Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)

Add to Collection

Article Mechanics

Identification of the plastic behavior of aluminum plates under free air explosions using inverse methods and full-field measurements

K. Spranghers et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

Add to Collection

Article Acoustics

Identification of stiffness and damping properties of plates by using the local equation of motion

Frederic Ablitzer et al.

JOURNAL OF SOUND AND VIBRATION (2014)

Add to Collection

Article Engineering, Biomedical

The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression

F. Gillard et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

Add to Collection

Article Optics

Zone wise local characterization of welds using digital image correlation technique

K. M. Saranath et al.

OPTICS AND LASERS IN ENGINEERING (2014)

Add to Collection

Article Multidisciplinary Sciences

Beyond Hopkinson's bar

F. Pierron et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)

Add to Collection

Article Materials Science, Characterization & Testing

A Fourier-series-based Virtual Fields Method for the Identification of 2-D Stiffness and Traction Distributions

T. T. Nguyen et al.

STRAIN (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of the Local Elasto-Plastic Behavior of FSW Welds Using the Virtual Fields Method

G. Le Louedec et al.

EXPERIMENTAL MECHANICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of Material Parameters of PVC Foams using Digital Image Correlation and the Virtual Fields Method

P. Wang et al.

EXPERIMENTAL MECHANICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Bayesian Identification of Elastic Constants in Multi-Directional Laminate from Moire Interferometry Displacement Fields

C. Gogu et al.

EXPERIMENTAL MECHANICS (2013)

Add to Collection

Article Mechanics

Characterization of the post-necking strain hardening behavior using the virtual fields method

J. -H. Kim et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Multidisciplinary Sciences

Inversion and decoupling of thermo-mechanical deformation in anisotropic materials using the virtual fields method

Yinji Ma et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2013)

Add to Collection

Article Materials Science, Characterization & Testing

Identification of Johnson-Cook's Viscoplastic Model Parameters Using the Virtual Fields Method: Application to Titanium Alloy Ti6Al4V

D. Notta-Cuvier et al.

STRAIN (2013)

Add to Collection

Article Materials Science, Characterization & Testing

Characterising the Strain and Temperature Fields in a Surrogate Bone Material Subject to Power Ultrasonic Excitation

D. Wang et al.

STRAIN (2013)

Add to Collection

Article Forestry

Characterisation of the bending stiffness components of MDF panels from full-field slope measurements

J. Xavier et al.

WOOD SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Out-of-plane Testing Procedure for Inverse Identification Purpose: Application in Sheet Metal Plasticity

T. Pottier et al.

EXPERIMENTAL MECHANICS (2012)

Add to Collection

Article Engineering, Mechanical

Improving the characterization of a hardening law using digital image correlation over an enhanced heterogeneous tensile test

H. Haddadi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

Add to Collection

Article Mechanics

On the use of simulated experiments in designing tests for material characterization from full-field measurements

Marco Rossi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Add to Collection

Article Engineering, Mechanical

Identification of hardening parameters using finite element models and full-field measurements: some case studies

Laurent Robert et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2012)

Add to Collection

Article Engineering, Biomedical

Identifying the dynamic compressive stiffness of a prospective biomimetic elastomer by an inverse method

Steven P. Mates et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)

Add to Collection

Article Materials Science, Characterization & Testing

Combining displacement, strain, temperature and heat source fields to investigate the thermomechanical response of an elastomeric specimen subjected to large deformations

Evelyne Toussaint et al.

POLYMER TESTING (2012)

Add to Collection

Article Materials Science, Characterization & Testing

Ultra-High-Speed Full-Field Deformation Measurements on Concrete Spalling Specimens and Stiffness Identification with the Virtual Fields Method

F. Pierron et al.

STRAIN (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method

R. Moulart et al.

EXPERIMENTAL MECHANICS (2011)

Add to Collection

Article Materials Science, Characterization & Testing

Virtual Fields Method on Planar Tension Tests for Hyperelastic Materials Characterisation

G. Palmieri et al.

STRAIN (2011)

Add to Collection

Article Physics, Applied

Characterizing elastic properties of superconducting windings by simulations and experiments

J-H Kim et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2011)

Add to Collection

Article Engineering, Electrical & Electronic

Identification of the Mechanical Properties of Superconducting Windings Using the Virtual Fields Method

Jin-Hwan Kim et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2010)

Add to Collection

Article Engineering, Mechanical

Identification of sheet metal plastic anisotropy using heterogeneous biaxial tensile tests

M. Teaca et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)

Add to Collection

Article Mechanics

Extension of the virtual fields method to elasto-plastic material identification with cyclic loads and kinematic hardening

F. Pierron et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

Add to Collection

Article Acoustics

An alternative to modal analysis for material stiffness and damping identification from vibrating plates

Alain Giraudeau et al.

JOURNAL OF SOUND AND VIBRATION (2010)

Add to Collection

Article Engineering, Mechanical

Identification of Poisson's ratios of standard and auxetic low-density polymeric foams from full-field measurements

F. Pierron

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2010)

Add to Collection

Article Engineering, Manufacturing

Variation of transverse and shear stiffness properties of wood in a tree

J. Xavier et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

Add to Collection

Article Engineering, Manufacturing

Local stiffness reduction in impacted composite plates from full-field measurements

J. -H. Kim et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

Add to Collection

Article Mechanics

Application of the virtual fields method to mechanical characterization of elastomeric materials

N. Promma et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

Add to Collection

Article Optics

Assessment of measuring errors in DIC using deformation fields generated by plastic FEA

P. Lava et al.

OPTICS AND LASERS IN ENGINEERING (2009)

Add to Collection

Article Materials Science, Characterization & Testing

A new characterisation method for rubber

T. Guelon et al.

POLYMER TESTING (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Overview of identification methods of mechanical parameters based on full-field measurements

Stephane Avril et al.

EXPERIMENTAL MECHANICS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of heterogeneous constitutive parameters in a welded specimen: Uniform stress and virtual fields methods for material property estimation

M. A. Sutton et al.

EXPERIMENTAL MECHANICS (2008)

Add to Collection

Article Engineering, Mechanical

Mechanical properties of crimped mineral wools: Identification from digital image correlation

Jean-Francois Witz et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of elasto-visco-plastic parameters and characterization of Luders behavior using digital image correlation and the virtual fields method

Stephane Avril et al.

MECHANICS OF MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Elastoplastic behavior identification for heterogeneous loadings and materials

F. Latourte et al.

EXPERIMENTAL MECHANICS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Stress reconstruction and constitutive parameter identification in plane-stress elasto-plastic problems using surface measurements of deformation fields

S. Avril et al.

EXPERIMENTAL MECHANICS (2008)

Add to Collection

Article Materials Science, Characterization & Testing

Identification of the orthotropic elastic stiffnesses of composites with the virtual fields method: Sensitivity study and experimental validation

F. Pierron et al.

STRAIN (2007)

Add to Collection

Article Mechanics

General framework for the identification of constitutive parameters from full-field measurements in linear elasticity

S. Avril et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Optics

Calibration and evaluation of optical systems for full-field strain measurement

Eann A. Patterson et al.

OPTICS AND LASERS IN ENGINEERING (2007)

Add to Collection

Article Engineering, Manufacturing

The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steel

D. Umbrello et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)

Add to Collection

Article Mechanics

Viscoplastic parameter estimation by high strain-rate experiments and inverse modelling - Speckle measurements and high-speed photography

Jorgen Kajberg et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Forestry

Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test

Jose Xavier et al.

HOLZFORSCHUNG (2007)

Add to Collection

Article Engineering, Manufacturing

Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method

J.-H. Kim et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Identification of elasto-plastic constitutive parameters from statically undetermined tests using the virtual fields method

Y. Pannier et al.

EXPERIMENTAL MECHANICS (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Stiffness and damping identification from full field measurements on vibrating plates

A. Giraudeau et al.

EXPERIMENTAL MECHANICS (2006)

Add to Collection

Article Mechanics

Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates

AD Mulliken et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

Add to Collection

Article Engineering, Mechanical

Applying the virtual fields method to the identification of elasto-plastic constitutive parameters

M Grediac et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

Add to Collection

Article Engineering, Manufacturing

Identification of the through-thickness rigidities of a thick laminated composite tube

R Moulart et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

Add to Collection

Article Engineering, Manufacturing

Experimental identification of a nonlinear model for composites using the grid technique coupled to the virtual fields method

H Chalal et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

Add to Collection

Article Forestry

An approach to viscoelastic behaviour analysis of wood-based panels by an inverse method of characterisation

F Bos et al.

HOLZFORSCHUNG (2005)

Add to Collection

Article Engineering, Multidisciplinary

Numerical issues in the virtual fields method

M Grédiac et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)

Add to Collection

Article Engineering, Multidisciplinary

A finite element formulation to identify damage fields: the equilibrium gap method

D Claire et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Sensitivity of the virtual fields method to noisy data

S Avril et al.

COMPUTATIONAL MECHANICS (2004)

Add to Collection

Article Mechanics

Characterisation of materials subjected to large strains by inverse modelling based on in-plane displacement fields

J Kajberg et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)

Add to Collection

Article Engineering, Mechanical

High strain-rate tensile testing and viscoplastic parameter identification using microscopic high-speed photography

J Kajberg et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2004)

Add to Collection

Article Engineering, Manufacturing

Direct identification of the damage behaviour of composite materials using the virtual fields method

H Chalal et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)

Add to Collection

Article Materials Science, Composites

Identification of constitutive laws for wood-based panels by means of an inverse method

L Le Magorou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

Add to Collection

Article Engineering, Manufacturing

Applying the virtual fields method to determine the through-thickness moduli of thick composites with a nonlinear shear response

M Grediac et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)

Add to Collection

Article Mechanics

Identification of the through-thickness properties of thick laminated tubes using the virtual fields method

F Pierron et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)

Add to Collection

Article Engineering, Manufacturing

Identification of the through-thickness moduli of thick composites from whole-field measurements using the Iosipescu fixture: theory and simulations

F Pierron et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.