☆ 4.5 Article

Synergistic effect of inorganic Mg(OH)2 and organic triphenyl phosphate based coating layers on flame-retardant separator for high-voltage Li|| LiNi0.8Co0.1Mn0.1O2 cell

SOLID STATE IONICS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Poly(methyl methacrylate-butyl-acrylamide-styrene)/polyethylene electrospinning separator incorporated with ionic liquid for safer LiNi0.5Co0.2Mn0.3O2 cathode

Mingyao Hong et al.

Summary: By coating P(MMA-BA-AN-St) copolymer on the PE separator, the compatibility issue between ionic liquid and traditional polyolefin separator was addressed, leading to improved performance in terms of higher ionic conductivity and enhanced electrochemical stability for the assembled battery.

IONICS (2022)

Add to Collection

Article Electrochemistry

Application of Terpolymer Encapsulated Flame-Retardant Separator in Ni-Rich and High-Voltage Lithium-Ion Batteries

Jinhong Huang et al.

Summary: Increasing the working voltage of a Ni-rich cathode is an effective way to enhance the energy density of lithium-ion batteries. However, this could also bring safety hazards. This study successfully improved flame retardancy and maintained electrochemical stability by encapsulating flame retardant TPP in a P(BMA-AN-St) terpolymer during the electrospinning process.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

Add to Collection

Article Engineering, Chemical

Mechanically robust, nonflammable and surface cross-linking composite membranes with high wettability for dendrite-proof and high-safety lithium-ion batteries

Guo Lin et al.

Summary: This study proposes a new strategy to prepare high-safety and heat-resistant lithium-ion battery separators by modifying and enhancing poly(arylene ether nitrile) membranes. The resulting composite separator displays superior thermal stability, electrolyte affinity, and mechanical strength, leading to better performance in lithium-ion batteries.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

Ultra-robust polyimide nanofiber separators with shutdown function for advanced lithium-ion batteries

Guohua Sun et al.

Summary: In this study, an advanced polyimide (PI) nanofiber membrane (PIE) with ultrahigh strength and the shutdown function was developed by optimizing precursor viscosity and nanofibers microstructure. The PIE separator showed superior wettability, heat resistance, ion conductivity, flame resistance, and high-temperature shutdown function compared to the commercial Celgard separator. The PIE separator-based LIBs demonstrated higher performance and stability.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Influence of electrolyte presence on the vibration behavior of a Li-ion pouch cell and on the mechanical characteristics of its incorporated Al2O3-coated polyolefin separator

Patrick Kolm et al.

Summary: This paper investigates the influence of electrolytes on the mechanical behavior of a commercial pouch cell and its coated separator through compression and tensile tests. Modal analyses were performed to determine the damping behavior and dynamic stiffness of wet and dry cells.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

A multiscale study on the effect of compression on lithium-ion battery separators

Jie Xu et al.

Summary: This study investigates the effects of compression on the mechanical and transport properties of Li-ion battery separators using a multiscale approach. The results reveal that compression adversely affects the charging performance of the battery, highlighting the importance of optimizing separators in the future.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

papers Electrolyte-philic and thermal-resistant polyimide separator enhances the performance of flexible silicon/carbon nanofibers for lithium-ion batteries

Xin Liu et al.

Summary: This study reports a method to achieve a stable interface of silicon anode using a polyimide separator. The separator has high polarity, outstanding electrolyte absorption, and reduction of side reactions. The composite material formed by confining silicon particles in polyimide-derived carbon nanofibers with a bamboo-like morphology increases the energy density of the battery, mitigates the growth of new interfaces, and avoids side reactions.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

papers Electrolyte-philic and thermal-resistant polyimide separator enhances the performance of flexible silicon/carbon nanofibers for lithium-ion batteries

Xin Liu et al.

Summary: This study introduces a solution using a polyimide separator and silicon carbon nanofiber composite to achieve a stable interface for silicon anode, leading to increased energy density and cycling stability in batteries.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Rational Design for a High-Safety Lithium-Ion Battery Assembled with a Heatproof-Fireproof Bifunctional Separator

Longqing Peng et al.

Summary: A heatproof-fireproof bifunctional separator coated with ammonium polyphosphate (APP) particles on a ceramic-coated separator modified with phenol-formaldehyde resin (CCS@PFR) is designed. The separator acts as a thermal-supporting layer and fireproof layer, enabling the batteries to withstand high temperatures and preventing fire hazards. This design demonstrates excellent safety performance in full cell and pouch cell tests.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Energy & Fuels

Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

Fabian Duffner et al.

Summary: This review highlights the current production status of representative PLIBs and the advantages of lithium-ion batteries as advanced electrochemical energy storage technology. It also discusses the research and manufacturing processes of post-lithium technologies.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Recent progress in flame-retardant separators for safe lithium-ion batteries

Xingyi Zhang et al.

Summary: This review summarizes recent developments towards highly flame-retardant separators and solid-state electrolytes for lithium-ion batteries, including the composition, structure, and performance of flame-retardant separators for liquid LIBs, as well as different types of solid-state electrolytes. Future challenges and outlooks for flame-retardant separators in practical applications are also discussed.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Engineering a Robust Interface on Ni-Rich Cathodes via a Novel Dry Doping Process toward Advanced High-Voltage Performance

Liang Luo et al.

Summary: Ni-rich layered oxides are commonly used as cathode materials for EV cells due to their high energy density, cost-effectiveness, and low toxicity. However, their high-voltage stability has not met the requirements of power batteries. A new dry interface modifying process was used to construct a Ti-based interfacial architecture on the surface of LiNi0.6Co0.2Mn0.2O2 (NCM) cathode materials, improving cycling stability and capacity retention significantly. After 500 charge and discharge cycles, the capacity retention rate can reach 93%, demonstrating the effectiveness of this approach in enhancing the performance of Ni-rich cathode materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Fire-Resistant Liquid Electrolyte Formulation for Safe and Long-Cycled Lithium-Ion Batteries

Kihun An et al.

Summary: By utilizing a novel electrolyte design with fire-resistant materials and additives, a safe and high-performance lithium-ion battery has been developed, showcasing higher energy density and longer cycle life.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Thermodynamics

Over-heating triggered thermal runaway behavior for lithium-ion battery with high nickel content in positive electrode

Haimin Wang et al.

Summary: The experiment simulated thermal abuse of NCM811 battery using different heating methods, revealing that thermal runaway triggered by local heating caused more serious damage compared to uniform heating.

ENERGY (2021)

Add to Collection

Review Chemistry, Applied

A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards

Yuqing Chen et al.

Summary: Efficient and reliable energy storage systems are essential for modern society, with lithium-ion batteries (LIBs) being widely used but facing safety challenges. This review examines LIB safety issues, strategies for improvement, and current testing standards, providing insights into potential future developments for safer LIBs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Review Chemistry, Physical

Research Progress of Single-Crystal Nickel-Rich Cathode Materials for Lithium Ion Batteries

Bianzheng You et al.

Summary: Single-crystal nickel-rich cathode materials (SC-NRCMs) exhibit outstanding structural and thermal stabilities, with intergranular-crack-free morphology showing superior cycling performance even under severe conditions. Various synthetic methods are summarized, revealing the relationship between precursor, sintering process, and final products of SC-NRCMs. Challenges faced by SC-NRCMs, such as lithium diffusion kinetics and intragranular cracks under high voltage, are discussed along with corresponding mechanisms and modifications.

SMALL METHODS (2021)

Add to Collection

Review Energy & Fuels

An overview of modification strategies to improve LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode performance for automotive lithium-ion batteries

Hailin Zhang et al.

Summary: By overviewing the issues and challenges of NCM811 materials, as well as summarizing the modification strategies for these materials, this paper emphasizes on the future development trend and perspectives of high nickel NCM811 materials.

ETRANSPORTATION (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Safer Lithium-Ion Batteries from the Separator Aspect: Development and Future Perspectives

Zhifang Liu et al.

Summary: This review summarizes recent advancements in traditional separators modified with ceramic materials and flame retardant materials, as well as multifunctional separators that prevent thermal runaway, aiming to enhance the safety of LIBs. It also discusses the relationship between separator structure, performance, and the overall comprehensive performance of LIBs.

ENERGY & ENVIRONMENTAL MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanistics of Lithium-Metal Battery Performance by Separator Architecture Design

Wenxiu Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

High Modulus, Thermally Stable, and Self-Extinguishing Aramid Nanofiber Separators

Anish Patel et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Boosting high-voltage cyclic stability of nickel-rich layered cathodes in full-cell by metallurgy-inspired coating strategy

Yingjie Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Applied

Electrospun cellulose polymer nanofiber membrane with flame resistance properties for lithium-ion batteries

Yue Chen et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Engineering, Environmental

Designing of multilevel-nanofibers-based organic-inorganic hybrid gel electrolyte enabling an innovative lithium-ion battery with superior ionic transport capability and advanced security

Huijuan Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

An AlOOH-coated polyimide electrospun fibrous membrane as a high-safety lithium-ion battery separator

Guobin Zhong et al.

IONICS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Flame-Retardant Bilayer Separator with Multifaceted van der Waals Interaction for Lithium-Ion Batteries

Guangfeng Zeng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Thermally stable non-aqueous ceramic-coated separators with enhanced nail penetration performance

Bokyung Jung et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dual-Phase Single-Ion Pathway Interfaces for Robust Lithium Metal in Working Batteries

Rui Xu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Core-shell structured ceramic nonwoven separators by atomic layer deposition for safe lithium-ion batteries

Xiu Shen et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Robust polyetherimide fibrous membrane with crosslinked topographies fabricated via in-situ micro-melting and its application as superior Lithium-ion battery separator with shutdown function

Lushi Kong et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Designing Low Impedance Interface Films Simultaneously on Anode and Cathode for High Energy Batteries

Bo Liao et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Converting detrimental HF in electrolytes into a highly fluorinated interphase on cathodes

Changchun Ye et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Multidisciplinary Sciences

Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries

Kai Liu et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Electrochemistry

A Flame-Retardant Composite Polymer Electrolyte for Lithium-Ion Polymer Batteries

Seokwoo Kim et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Multidisciplinary Sciences

Superconcentrated electrolytes for a high-voltage lithium-ion battery

Jianhui Wang et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Electrochemistry

Bis(2,2,2-Trifluoroethyl) Ethylphosphonate as Novel High-efficient Flame Retardant Additive for Safer Lithium-ion Battery

Xiaoming Zhu et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

New flame-retardant composite separators based on metal hydroxides for lithium-ion batteries

Daeyong Yeon et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Extinguishing Lithium Ion Batteries Based on Internally Embedded Fire-Extinguishing Microcapsules with Temperature-Responsiveness

Taeeun Yim et al.

NANO LETTERS (2015)

Add to Collection

Article Multidisciplinary Sciences

Nonflammable perfluoropolyether-based electrolytes for lithium batteries

Dominica H. C. Wong et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Organic-inorganic hybrid flame retardant: preparation, characterization and application in EVA

Li Yu et al.

RSC ADVANCES (2014)

Add to Collection

Article Electrochemistry

A flame retarding separator with improved thermal stability for safe lithium-ion batteries

Jung-Je Woo et al.

ELECTROCHEMISTRY COMMUNICATIONS (2013)

Add to Collection

Article Polymer Science

Effects of magnesium hydroxide and its synergistic systems on the flame retardance of polyformaldehyde

Yuan Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Lithium ion conduction in ionic liquid-based gel polymer electrolyte

Minato Egashira et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection

Review Chemistry, Physical

Safety mechanisms in lithium-ion batteries

PG Balakrishnan et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Chemistry, Physical

Comparative study of trimethyl phosphite and trimethyl phosphate as electrolyte additives in lithium ion batteries

XL Yao et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.