☆ 4.7 Article

Molecular doping mechanism for efficient and stable formamidine-cesium perovskite solar cells

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Phase-Pure α-FAPbI3 for Perovskite Solar Cells

Tingting Niu et al.

Summary: In this Perspective, the authors review various strategies for preparing phase-pure alpha-FAPbI(3) and investigate the fundamental challenges of alpha-FAPbI(3) PSCs, proposing their perspective on preparing high-quality and high-purity alpha-FAPbI(3).

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

Add to Collection

Article Chemistry, Applied

Incorporation of γ-aminobutyric acid and cesium cations to formamidinium lead halide perovskites for highly efficient solar cells

Yanqiang Hu et al.

Summary: By incorporating gamma-aminobutyric acid and cesium cations into FAPbI(3), the phase stability is improved, resulting in enhanced efficiency and stability of the solar cell.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

A dopant-free hole transport material boosting the performance of inverted methylamine-free perovskite solar cells

Li Wan et al.

Summary: The use of PFDTS as a hole transport layer can improve the power conversion efficiency of inverted perovskite solar cells, and also exhibit better air and thermal stability compared to traditional PTAA-based devices.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Physics, Applied

Acetylammonium chloride as an additive for crystallization control and defect passivation in MAPbI3 based perovskite solar cells

Akhil Alexander et al.

Summary: This study demonstrates the use of acetylammonium chloride (AAC) as an additive to control the morphology and crystal quality of perovskite films, resulting in improved efficiency and stability of perovskite solar cells (PSCs).

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing the Perovskite Film Formation Using the Gas Quenching Method by In Situ GIWAXS: Morphology, Properties, and Device Performance

Rodrigo Szostak et al.

Summary: This study investigates the formation mechanism of MAPbI(3) and Cs(x)FA(1-)(x)Pb(I0.83Br0.17)(3) perovskites during deposition process using X-ray scattering, comparing the influence of DMSO and NMP solvents. The results show that the choice of optimal solvent varies for different Cs content, which is crucial for the final performance of the solar cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dually-Passivated Perovskite Solar Cells with Reduced Voltage Loss and Increased Super Oxide Resistance

Qin Zhou et al.

Summary: In recent years, the power conversion efficiency of perovskite solar cells has rapidly improved, but defects at the grain boundaries and surfaces remain a challenge. A dual-passivation strategy effectively reduces defect density, enhancing device performance and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells with Imidazolium-Based Ionic Liquid for Surface Passivation and Charge Transport

Xuejie Zhu et al.

Summary: In this study, DMIMPF6 ionic liquid was used to passivate surface defects of perovskite, resulting in increased solar cell efficiency and enhanced long-term stability of the device.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Moisture-Resistant FAPbI3 Perovskite Solar Cell with 22.25 % Power Conversion Efficiency through Pentafluorobenzyl Phosphonic Acid Passivation

Erdi Akman et al.

Summary: Perovskite solar cells (PSCs) show great promise for photovoltaic applications due to their low-cost assembly, exceptional performance, and low-temperature solution processing. This study focuses on stabilizing the alpha-FAPbI(3) perovskite phase using PFBPA as a passivation agent, resulting in high-quality and stable PSCs with improved efficiency and long-term stability. The thin PFBPA passivation layer effectively protects the perovskite layer from moisture, maintaining over 90% of the original efficiency under different humidity levels after 600 hours.

CHEMSUSCHEM (2021)

Add to Collection

Review Chemistry, Physical

Mechanisms and Suppression of Photoinduced Degradation in Perovskite Solar Cells

Jing Wei et al.

Summary: Solar cells based on metal halide perovskites have high efficiency but suffer from photoinduced degradation mechanisms, including phase segregation or chemical decomposition in organic-inorganic perovskites, introduction of defects by oxide electron transport layers, and poor photostability of small molecules-based hole transport layers. Improvement in stability is needed for future optimization of relevant devices.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Tailoring the mercaptan ligands for high performance inverted perovskite solar cells with efficiency exceeding 21%

Shuangjie Wang et al.

Summary: Interface passivation engineering with a p-conjugated dual-ligand 1,4-phenylmercaptan (PHMT) has been shown to improve the optoelectronic characteristics and stability of perovskite solar cells (PSCs). The PHMT-modified inverted device based on MAPbI(3) achieved an efficiency increase from 18.11% to 21.11% and maintained stability for up to 3500 hours, demonstrating enhanced performance and prolonged durability.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Energy & Fuels

Efficient and stable perovskite solar cells doped by cesium acetate

Liqiang Chen et al.

Summary: By introducing cesium acetate (CsAc) into the precursor, the performance and stability of perovskite solar cells are improved, resulting in a higher power conversion efficiency and reduced defect density.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Toward Efficient and Stable Perovskite Photovoltaics with Fluorinated Phosphonate Salt Surface Passivation

Guifang Han et al.

Summary: This study investigates the surface passivation of perovskite solar cells using fluorinated phosphonic acid and its corresponding phosphonate salt. The passivation treatment with fluorinated phosphonium salt enhances the photoluminescence intensity, carrier lifetime, and power conversion efficiency of perovskite films. The treated films also exhibit superhydrophobic properties, leading to excellent long-term stability of devices.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Acid Dissociation Constant: A Criterion for Selecting Passivation Agents in Perovskite Solar Cells

Sun-Ho Lee et al.

Summary: The acid dissociation constant of passivation agents plays a key role in the photovoltaic performance of perovskite solar cells. Passivation with high-pK(a) CYCl can enhance PCE, while low-pK(a) ANCl leads to more traps and decreased efficiency.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules

Ruihao Chen et al.

Summary: Surface iodide management using cesium sulfonate can stabilize lead halide perovskite surfaces, reduce surface defects and nonradiative recombination, and improve the efficiency and stability of perovskite solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Two birds with one stone: dual grain-boundary and interface passivation enables >22% efficient inverted methylammonium-free perovskite solar cells

Saba Gharibzadeh et al.

Summary: This study successfully enhanced the efficiency and stability of inverted p-i-n structured perovskite solar cells using a dual passivation strategy, achieving high power conversion efficiency and good stability.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Formamidine disulfide oxidant as a localised electron scavenger for >20% perovskite solar cell modules

Jun Zhu et al.

Summary: The study demonstrates the use of formamidine disulfide dihydrochloride (FASCl) to manipulate intrinsic defects in formamidinium lead iodide (FAPbI(3)), leading to compact full-coverage perovskite layers with high crystallinity and a large grain size. The incorporation of FASCl results in a remarkable power conversion efficiency (PCE) of 23.11% and excellent stability under different environmental conditions, making it a promising approach for highly efficient perovskite solar cells.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Impact of Processing on Structural and Compositional Evolution in Mixed Metal Halide Perovskites during Film Formation

Maged Abdelsamie et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells

Jiangzhao Chen et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Microscopic Degradation in Formamidinium-Cesium Lead Iodide Perovskite Solar Cells under Operational Stressors

Nengxu Li et al.

JOULE (2020)

Add to Collection

Article Energy & Fuels

High-performance perovskite solar cells based on passivating interfacial and intergranular defects

Pengfei Liu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Multidisciplinary Sciences

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells

Haizhou Lu et al.

SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallization control and multisite passivation of perovskites with amino acid to boost the efficiency and stability of perovskite solar cells

Liuquan Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Crown Ether Modulation Enables over 23% Efficient Formamidinium-Based Perovskite Solar Cells

Tzu-Sen Su et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Methylamine-Containing Antisolvent Strategy to Fabricate High-Efficiency and Stable FA0.85Cs0.15Pb(Br0.15I2.85) Perovskite Solar Cells

Yuqian Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Importance of Functional Groups in Cross-Linking Methoxysilane Additives for High-Efficiency and Stable Perovskite Solar Cells

Lin Xie et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Review Multidisciplinary Sciences

Dimensionality engineering of hybrid halide perovskite light absorbers

Peng Gao et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Multifunctional molecular modulators for perovskite solar cells with over 20% efficiency and high operational stability

Dongqin Bi et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Highly Efficient and Stable Perovskite Solar Cells by Interfacial Engineering Using Solution-Processed Polymer Layer

Feijiu Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Stabilizing Perovskite Structures by Tuning Tolerance Factor: Formation of Formamidinium and Cesium Lead Iodide Solid-State Alloys

Zhen Li et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Charge-Carrier Balance for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Ke Chen et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Pbl2-HMPA Complex Pretreatment for Highly Reproducible and Efficient CH3NH3PbI3 Perovskite Solar Cells

Yi Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance

Michael Saliba et al.

SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells

David P. McMeekin et al.

SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides

Xiong Li et al.

NATURE CHEMISTRY (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites

Nakita K. Noel et al.

ACS NANO (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.